The P-47 Thunderbolt is a World War II fighter aircraft built by Republic Aviation from 1941 to 1945.
In response to a USAAC requirement for a new fighter aircraft, Republic Aviation engineer Alexander Kartveli proposed the AP-10 lightweight high-altitude interceptor on August 1, 1939. [1] As originally proposed, the AP-10 was to have been powered by a 1,150 hp Allison V-1710-39 12-cylinder inline engine and have an armament consisting of two nose-mounted .50 in (12.7 mm) M2 Browning machine guns. Maximum speed was estimated to be 415 mph, while gross weight was to be 4,900 lb. [1]
The USAAC was impressed by the AP-10 proposal, but expressed concerns that it would be underarmed. Kartveli revised the AP-10 by slightly increasing its size and mounting two .30 in (7.62 mm) M1919 Browning machine guns in each wing, raising the gross weight to 6,570 lb. Satisfied, the USAAC ordered a single prototype under the designation XP-47, in November 1939. [1]
In addition to the XP-47, the USAAC also ordered another prototype as the XP-47A. This prototype was ordered without military equipment, allowing for it to be finished and tested before the XP-47. [1]
In early 1940, combat reports from war in Europe indicated that the P-47 was inferior to Luftwaffe fighters. In response, the USAAC issued new requirements for a fighter including an airspeed of 400 mph at 25,000 ft, an armament of six or (preferably) eight .50 in machine guns, cockpit armor plating, self-sealing fuel tanks, and a minimum fuel load of 315 gallons. [2] Expecting the USAAC to reject the XP-47 for the more suitable Curtiss XP-46, Republic canceled the XP-47 and XP-47A and Kartveli began an extensive redesign of the aircraft. [1]
On June 12, 1940, Kartveli submitted the redesigned AP-10 to the USAAC. The new aircraft was much larger than the original, and the inline engine was swapped for a turbo-supercharged Pratt & Whitney R-2800 Double Wasp 18-cylinder radial engine. [2] Armament was increased to eight M2 Brownings, four mounted in each wing, making it one of the heaviest-armed fighters considered by the USAAC at the time. [1] The expected performance met USAAC requirements, however, its fuel load fell slightly short. [2] Despite this, the USAAC ordered a prototype of the improved design as the XP-47B, on September 6, 1940. [1]
The XP-47B was first flown on May 6, 1941. It was powered by a 1,960 hp XR-2800-21 engine and featured an elliptical wing, an all-metal construction (except for the fabric-covered control surfaces), and a hinged canopy. [1] The main landing gear retracted inward into the wings, telescoping nine inches to clear the underside of the fuselage, and the steerable tailwheel was fully retractable. With a loaded weight of 12,086 lb, the XP-47B was almost twice as heavy as its competitors. Performance was higher than expected with a maximum speed of 412 mph. [1]
The XP-47B crashed on August 8, 1942, however, an order for 773 production aircraft had been placed almost two years before on September 13, 1940. [1] The production aircraft, designated P-47B, differed from the prototype in that they were powered by a 2,000 hp production R-2800-21 engine, a sliding canopy in place of the original hinged unit, and redesigned metal ailerons and elevators. [3] Only 171 of the original order were completed as P-47Bs before production switched to the P-47C. [3] The aircraft's nickname, Thunderbolt, was created by Republic's Director of Military Contracts, C. Hart Miller. [1]
The final P-47B was converted in September 1942 into a prototype for a high-altitude variant as the XP-47E. Modifications included a pressurized cockpit with a hinged canopy. The project was canceled due to increased emphasis on low-level operations over Europe. [5]
Another P-47B was fitted with a larger-area laminar-flow wing as the XP-47F. The XP-47F was first flown on September 17, 1942, but project was ultimately canceled when the aircraft crashed and no production aircraft followed. [4] [6]
Several improvements were incorporated into the Thunderbolt starting with the 172nd production aircraft on September 14, 1942. The resulting P-47C featured a redesigned metal rudder, as the original fabric-covered unit was prone to tail flutter which frequently led to crashes. [7] A revised oxygen system was fitted, as were new SCR-274-N and SCR-515-A radios. The main external difference between the P-47B and C was the upright antenna mast, which replaced the B's forward-swept mast. [7] The C variant was built in four production blocks totaling 602 aircraft, with production ending in February 1943 when Republic's Farmingdale, New York plant switched to the P-47D. [7]
On October 14, 1941, the USAAF (successor to the USAAC) ordered an additional 850 P-47s. Unable to keep up with the demand with their main plant in Farmingdale, New York, Republic built a new plant in Evansville, Indiana. Production of P-47Cs in the new plant were designated P-47D-RA, with the first aircraft rolling off the production line in September 1942. The initial production block was based on the P-47C-2-RE [4] or C-5-RE, [8] but with two additional cowl flaps (for a total of five) on each side (this was absent on early aircraft, making them indistinguishable from P-47Cs). Internal changes included extra cockpit armor and changes to the turbo-supercharger exhaust system. [8] Eventually, these changes would be incorporated into the Farmingdale-built aircraft, these designated P-47D-1-RE. [4] 21 production blocks of the "razorback" P-47D, totaling 9,530 aircraft, would be built by both plants before production switched to the "bubbletop" D-variant.
Even with the second plant, Republic was still having trouble keeping up with the ever increasing orders for Thunderbolts. [4] Curtiss-Wright, which recently prepared its Buffalo, New York plant for mass production of its P-60A before their contract was canceled, was awarded another contract to produce the P-47 as the P-47G. [13] The first delivery of a Curtiss-Wright-built P-47G was in December 1942. [13] In all, Curtiss-Wright built 354 P-47Gs in five production blocks before production ended in March 1944.
In an attempt to improve the performance of the Thunderbolt, Republic began a project to install a 2,300 hp Chrysler XIV-2220-1 16-cylinder inverted-V engine in two P-47D-15-RE airframes in August 1943. The resulting XP-47H had a new streamlined nose with a large intake and was expected to have a maximum speed of 490 mph. While sources do not agree whether the aircraft met the speed expectations or fell short, by the time the aircraft were modified in 1945, the Jet Age was beginning and the USAAF was losing interest in piston-engined fighters, and the XP-47H project was canceled. [14]
A similar attempt to improve performance resulted in the XP-47J. Unlike the XP-47H, the sole XP-47J was a newly built airframe, with many changes to reduce weight. The aircraft was fitted with a 2,800 hp R-2800-57C engine with a CH-5 supercharger, housed in a redesigned streamlined cowling. Armament was reduced to six M2 Brownings. [15]
The XP-47J was first flown on November 26, 1943, and on August 4, 1944, it became the first piston-engined fighter to exceed 500 mph, with a speed of 504 mph, making it the fastest Thunderbolt variant. A production version of the XP-47J was canceled in favor of another Thunderbolt development, the XP-72, as were plans for installing an R-2800-61 engine with contra-rotating propellers. [15]
A common complaint from P-47 pilots was that the razorback cockpit limited rearward visibility. In response to these complaints, Republic fitted a bubble canopy from a Hawker Typhoon onto a P-47D-5-RE in July 1943. Designated XP-47K, the aircraft's new canopy improved visibility greatly. [16] Another "bubbletop" prototype was modified from a P-47D-20-RE as the XP-47L, differing from the XP-47K in that it had an increased fuel capacity. [17] For reasons unknown, the first production bubbletop Thunderbolts were not given a new variant letter, instead they were a continuation of the P-47D line. [16]
Production of the bubbletop Thunderbolt began with the P-47D-25-RE at Farmingdale and the P-47D-26-RA at Evansville. These aircraft were based on the XP-47L with increased fuel capacity. [4] Bubbletop P-47D production totaled 3,028 aircraft, built in eight production blocks, for a grand total of 12,558 P-47Ds. [8]
The appearance of the V-1 flying bomb, jet fighters such as the Messerschmitt Me 262, and rocket fighters such as the Messerschmitt Me 163 Komet led Republic to begin development of a high-speed variant of the Thunderbolt. Four P-47D-27-RE were modified with a 2,800 hp R-2800-57C engine with a CH-5 supercharger and the dive brakes of the P-47D-30 as YP-47Ms. An improved 13' Curtiss Electric C542S-B40 propeller was fitted, and changes were made to increase speed. [4] These improvements raised the top speed to 473 mph. In September 1944, the last 130 aircraft from the original P-47D-30-RE order were converted into an order for a production version of the YP-47M as the P-47M-1-RE. [18] Deliveries began in December 1944, though engine problems delayed their combat debut until a few weeks before the end of the war in Europe. [18]
The war in the Pacific demanded greater fighter ranges than in Europe. Therefore, the third YP-47M was fitted with a new longer-span wet wing featuring squared-off wingtips as the XP-47N. The USAAF placed an order for 1,900 P-47Ns on June 20, 1944, two days before the prototype was first flown, and many more orders followed, deliveries began in September 1944. [19] 1,816 P-47Ns were built in six production blocks, with orders for an additional 5,934 aircraft being canceled after VJ Day. [19] The final P-47 rolled off the production line in December 1945. [19]
Developed in parallel with the Republic XP-69, the AP-19 was proposed by Alexander Kartveli as a replacement for the P-47. [20] The aircraft was a development of the bubbletop P-47D, but was to be powered by 3,450 hp Pratt & Whitney R-4360-13 Wasp Major 28-cylinder radial engine driving contra-rotating six-bladed Aeroproducts propellers and armed with six M2 Brownings. The USAAF ordered two prototypes on June 18, 1943. The first prototype, with a four-bladed propeller due to delayed delivery of the intended unit, was first flown on February 2, 1944, and the second prototype with the intended propeller followed on June 26 of that year. The second XP-72 crashed early in the test program, but the USAAF was impressed with its performance and placed an order for 100 production P-72 aircraft with R-4360-19 and four 37 mm cannons in place of the Brownings. However, this order was canceled as the war neared its end. [21]
Variant | Number built | Serial number(s) | Notes |
---|---|---|---|
XP-47 | 1 | 40-3051 | Prototype; canceled during construction |
XP-47A | 1 | 40-3052 | Prototype; canceled during construction |
Total XP-47, XP-47A | 2 | ||
XP-47B | 1 | 40-3052 (serial number transferred from abortive XP-47A) | Prototype |
Total XP-47B | 1 | ||
P-47B-RE | 171 | 41-5895/6065 | 41-5938 converted to XP-47F; 41-6065 converted to XP-47E |
Total P-47B | 171 | ||
P-47C-RE | 58 | 41-6066/6123 | |
P-47C-1-RE | 54 | 41-6124/6177 | |
P-47C-2-RE | 128 | 41-6178/6305 | |
P-47C-5-RE | 362 | 41-6306/6667 | |
Total P-47C | 602 | ||
P-47D-RA | 114 | 42-22250/22363 | |
P-47D-1-RE | 105 | 42-7853/7957 | |
P-47D-2-RE | 445 | 42-7958/8402 | |
P-47D-2-RA | 200 | 42-22364/22563 | |
P-47D-3-RA | 100 | 42-22564/22663 | |
P-47D-4-RA | 200 | 42-22664/22863 | |
P-47D-5-RE | 300 | 42-8403/8702 | 42-8702 converted to XP-47K |
P-47D-6-RE | 350 | 42-74615/74964 | |
P-47D-10-RE | 250 | 42-74965/75214 | |
P-47D-11-RE | 400 | 42-75215/75614 | |
P-47D-11-RA | 250 | 42-22864/23113 | |
P-47D-15-RE | 446 | 42-75615/75814, 42-76119/76364 | |
P-47D-15-RA | 157 | 42-23143/23299 | 42-23297 and 42-23298 converted to XP-47H |
P-47D-16-RE | 254 | 42-75865/76118 | |
P-47D-16-RA | 29 | 42-23114/23142 | |
P-47D-20-RE | 299 | 42-25274/25322, 42-76365/76614 | 42-76614 converted to XP-47L |
P-47D-20-RA | 187 | 43-25254/25440 | |
P-47D-21-RE | 216 | 42-25323/25538 | |
P-47D-21-RA | 224 | 43-25441/25664 | |
P-47D-22-RE | 850 | 42-25539/26388 | |
P-47D-23-RA | 889 | 42-27389/28188, 43-25665/25753 | |
P-47D-25-RE | 385 | 42-26389/26773 | |
P-47D-26-RA | 250 | 42-28189/28438 | |
P-47D-27-RE | 615 | 42-26774/27388 | |
P-47D-28-RE | 750 | 44-19558/20307 | |
P-47D-28-RA | 1,028 | 42-28439/29466 | |
P-47D-30-RE | 800 | 44|20308/21107} | |
P-47D-30-RA | 1,800 | 44-32668/33867, 44-89684/90283 | |
P-47D-40-RA | 665 | 44-90284/90483, 45-49090/49554 | |
Total P-47D | 12,558 | ||
P-47G-CU | 20 | 42-24920/24939 | |
P-47G-1-CU | 40 | 42-24940/24979 | |
P-47G-5-CU | 60 | 42-24980/25039 | |
P-47G-10-CU | 80 | 42-25040/25119 | |
P-47G-15-CU | 154 | 42-25120/25273 | Two converted to TP-47G trainer variant |
Total P-47G | 354 | ||
XP-47J | 1 | 43-46952 | Prototype |
Total XP-47J | 1 | ||
P-47M-1-RE | 130 | 44-21108/21237 | |
Total P-47M | 130 | ||
P-47N-1-RE | 550 | 44-87784/88333 | |
P-47N-5-RE | 550 | 44-88334/88883 | |
P-47N-15-RE | 200 | 44-88884/89083 | |
P-47N-20-RE | 200 | 44-89084/89283 | |
P-47N-25-RE | 167 | 44-89284/89450 | |
P-47N-20-RA | 149 | 45-49975/50123 | |
Total P-47N | 1,816 | ||
Total, all types | 15,636 |
The Allison V-1710 aircraft engine designed and produced by the Allison Engine Company was the only US-developed V-12 liquid-cooled engine to see service during World War II. Versions with a turbocharger gave excellent performance at high altitude in the twin-engined Lockheed P-38 Lightning, and turbo-superchargers were fitted to experimental single-engined fighters with similar results.
The Republic P-47 Thunderbolt is a World War II-era fighter aircraft produced by the American company Republic Aviation from 1941 through 1945. It was a successful high-altitude fighter, and it also served as the foremost American fighter-bomber in the ground-attack role. Its primary armament was eight .50-caliber machine guns, and it could carry 5-inch rockets or a bomb load of 2,500 lb (1,100 kg). When fully loaded, the P-47 weighed up to 8 tons, making it one of the heaviest fighters of the war.
The Republic Aviation Corporation was an American aircraft manufacturer based in Farmingdale, New York, on Long Island. Originally known as the Seversky Aircraft Company, the company was responsible for the design and production of many important military aircraft, including its most famous products: World War II's P-47 Thunderbolt fighter, the F-84 Thunderjet and F-105 Thunderchief jet fighters.
The Douglas C-47 Skytrain or Dakota is a military transport aircraft developed from the civilian Douglas DC-3 airliner. It was used extensively by the Allies during World War II. During the war the C-47 was used for troop transport, cargo, paratrooper, for towing gliders and military cargo parachute drops. The C-47 remained in front-line service with various military operators for many years. It was produced in approximately triple the numbers as the larger, much heavier payload Curtiss C-46 Commando, which filled a similar role for the U.S. military.
Alexander Kartveli, born Aleksandre Kartvelishvili, was a Georgian aeronautical engineer and an aviation pioneer in the United States. Kartveli achieved important breakthroughs in military aviation in the time of turbojet fighters.
The Curtiss P-36 Hawk, also known as the Curtiss Hawk Model 75, is an American-designed and built fighter aircraft of the 1930s and 40s. A contemporary of the Hawker Hurricane and Messerschmitt Bf 109, it was one of the first of a new generation of combat aircraft—a sleek monoplane design with a retractable undercarriage making extensive use of metal in its construction.
The Pratt & Whitney R-2800 Double Wasp is an American twin-row, 18-cylinder, air-cooled radial aircraft engine with a displacement of 2,800 cu in (46 L), and is part of the long-lived Wasp family of engines.
The Seversky P-35 is an American fighter aircraft built by the Seversky Aircraft Company in the late 1930s. A contemporary of the Hawker Hurricane and Messerschmitt Bf 109, the P-35 was the first single-seat fighter in United States Army Air Corps to feature all-metal construction, retractable landing gear, and an enclosed cockpit.
The Seversky XP-41 was a fighter aircraft built in the United States in 1939. A single prototype was modified from the last production Seversky P-35 by adding a new streamlined canopy, a Pratt & Whitney R-1830-19 engine with a two-speed supercharger, and revised landing gear. The XP-41 first flew in March 1939. The aircraft was developed in parallel with the P-43 Lancer, and work was stopped when the USAAC showed a preference for the latter.
The Republic P-43 Lancer was a single-engine, all-metal, low-wing monoplane fighter aircraft built by Republic, first delivered to the United States Army Air Corps in 1940. A proposed development was the P-44 Rocket. While not a particularly outstanding fighter, the P-43A had a very good high-altitude performance coupled with an effective oxygen system. Fast and well-armed with excellent long-range capabilities, until the arrival of the Lockheed P-38 Lightning, the Lancer was the only American fighter capable of catching a Japanese Mitsubishi Ki-46 "Dinah" reconnaissance plane at the speeds and heights at which they flew. In addition, the P-43 flew many long-range, high-altitude photo recon missions until replaced by F-4/F-5 Lightnings in both the USAAF and RAAF.
The Curtiss P-60 was a 1940s American single-engine single-seat, low-wing monoplane fighter aircraft developed by the Curtiss-Wright company as a successor to their P-40. It went through a lengthy series of prototype versions, eventually evolving into a design that bore little resemblance to the P-40. None of these versions reached production.
The Curtiss XP-62 was a prototype single-engine interceptor aircraft, that was built for the United States Army Air Forces, by the Curtiss-Wright Corporation. It first flew in 1943.
The Grumman XP-50 was a land-based development of the shipboard XF5F-1 Skyrocket fighter, entered into a United States Army Air Corps (USAAC) contest for a twin-engine heavy interceptor aircraft. The USAAC placed an order for a prototype on 25 November 1939, designating it XP-50, but it lost the competition to the Lockheed XP-49.
The Republic XP-69 was an American fighter aircraft proposed by Republic Aviation in 1941 in response to a requirement by the United States Army Air Corps for a high-speed fighter. Manufacturers were encouraged to consider unorthodox designs; although the design was ordered as a prototype it was canceled because of delays with the engine that was to power it.
The Curtiss P-40 Warhawk was a WWII fighter aircraft that was developed from the P-36 Hawk, via the P-37. Many variants were built, some in large numbers, under names including the Hawk, Tomahawk, and Kittyhawk.
The Nakajima Ki-87 was a Japanese prototype high-altitude fighter-interceptor of World War II. It was a single seat, exhaust-driven turbo-supercharged engined, low-wing monoplane with a conventional undercarriage.
Over twenty variants of the North American P-51 Mustang fighter were produced from 1940, when it first flew, to after World War II, some of which were employed also in the Korean War and in several other conflicts.
The Curtiss P-37 was an American fighter aircraft made by Curtiss-Wright in 1937 for the US Army Air Corps. A development of the Curtiss P-36 Hawk to use an inline engine instead of the radial engine of the P-36 the fuselage was lengthened and the cockpit moved back. A small number of YP-37 aircraft was built for Air Corps evaluation. The expected top speed was not achieved and the project terminated in favor of the Curtiss P-40.