Smith & Wesson Model 10

Last updated
Smith & Wesson Model 1899 Military & Police
M&Prevolver.jpg
Lend-Lease M&P dating from World War II, missing lanyard ring
Type Service revolver
Place of originUnited States
Service history
In service1899–present
Used bySee Users
Wars World War I
Easter Rising
Irish War of Independence
World War II
First Indochina War
Korean War
Vietnam War
Bangladesh Liberation War [1]
Gulf War
The Troubles
other conflicts
Production history
Designed1899
Manufacturer Smith & Wesson
Produced1899–present
No. built6,000,000+
Variants38 M&P
M&P Model 1902
Model of 1905
Victory Model
Model 10
Specifications
Mass~ 34 ounces (960 g) with standard 4 in (100 mm) barrel (unloaded)
Barrel  length
  • 2 inches (51 mm)
  • 2.5 inches (64 mm)
  • 3 inches (76 mm)
  • 4 inches (100 mm)
  • 5 inches (130 mm)
  • 6 inches (150 mm)

Cartridge .38 Long Colt
.38 Special
.38/200 (.38 S&W)
Action Double action
Muzzle velocity 1,000 feet per second (300 m/s) (.38 Special)
685 feet per second (209 m/s) (.38/200)
Feed system6-round cylinder
SightsBlade front sight, notched rear sight

The Smith & Wesson Model 10, previously known as the Smith & Wesson .38 Hand Ejector Model of 1899, the Smith & Wesson Military & Police or the Smith & Wesson Victory Model, is a K-frame [2] revolver of worldwide popularity. In production since 1899, the Model 10 is a six-shot, .38 Special, double-action revolver with fixed sights. Over its long production run it has been available with barrel lengths of 2 in (51 mm), 3 in (76 mm), 4 in (100 mm), 5 in (130 mm), and 6 in (150 mm). Barrels of 2.5 inches (64 mm) are also known to have been made for special contracts. [3] Some 6,000,000 of the type have been produced over the years, making it the most-produced handgun of the 20th century. [4]

Contents

History

The first Model M&P of 1899, six-inch barrel. The ejector rod is free-standing, without the under-barrel latch of later models M&P1899.JPG
The first Model M&P of 1899, six-inch barrel. The ejector rod is free-standing, without the under-barrel latch of later models
The lockwork of the first model differed substantially from subsequent versions. The trigger return spring is a flat leaf rather than the coil spring-powered slide used in variations dating from 1905 onwards. S&W Model 10 original lockwork.jpg
The lockwork of the first model differed substantially from subsequent versions. The trigger return spring is a flat leaf rather than the coil spring-powered slide used in variations dating from 1905 onwards.

In 1899, the United States Army and Navy placed orders with Smith & Wesson for two to three thousand Model 1899 Hand Ejector revolvers chambered for the M1892 .38 Long Colt U.S. Service Cartridge. With this order, the Hand Ejector Model became known as the .38 Military and Police model. [5] That same year, in response to reports from military sources serving in the Philippines on the relative ineffectiveness of the new cartridge, Smith & Wesson began offering the Military & Police in a new chambering, .38 S&W Special (a.k.a. .38 Special), a slightly elongated version of the .38 Long Colt cartridge with greater bullet weight (158 grains) and powder charge increased from 18 to 21 grains of gunpowder. [5]

In 1902, the .38 Military & Police (2nd Model) was introduced and featured substantial changes. [3] These included major modification and simplification of the internal lockwork and the addition of a locking underlug on the barrel to engage the previously free-standing ejector rod. Barrel lengths were 4-, 5-, 6-, and 6.5-inches with a rounded butt. Serial numbers for the Military & Police ranged from number 1 in the series to 20,975. Most of the early M&P revolvers chambered in .38 Special appear to have been sold to the civilian market. [5] By 1904, S&W was offering the .38 M&P with a rounded or square butt, and 4-, 5-, and 6.5-inch barrels.

World War I

Smith & Wesson 1905 4th change 1915 Target model. "NRA" Slow Fire at 25 yards. The hammer was added later and is in the general form of the King Gun Shop modification usually intended for the timed and rapid-fire portions of the NRA course. Model10target.jpg
Smith & Wesson 1905 4th change 1915 Target model. "NRA" Slow Fire at 25 yards. The hammer was added later and is in the general form of the King Gun Shop modification usually intended for the timed and rapid-fire portions of the NRA course.

The .38 S&W Military & Police Model of 1905 4th Change, introduced 1915, incorporated a passive hammer block and enlarged service sights that quickly became a standard across the service revolver segment of the industry. The M&P revolver was issued in large numbers during World War I, where it proved itself to be a highly reliable and accurate weapon. Although WWI saw the rise of semi-automatic pistols, revolvers such as the M&P were used in vast numbers as semi-automatic handgun production at the time wasn't sufficient to meet the demand.

After the War, the M&P would become the standard issue police sidearm for the next 70 years. It would also become very popular with civilian shooters, with several new models being made, including the first snubnosed 2-, 2.5- and 3-inch barrel models being made in 1936. [3] [6]

World War II

The S&W M&P military revolvers produced from 1942 to 1944 had serial numbers with a "V" prefix, and were known as the "Smith & Wesson Victory Model". Early Victory Models did not always have the V prefix. During World War II 590,305 [7] of these revolvers were supplied to the United Kingdom, Canada, Australia, New Zealand, and South Africa under the Lend-Lease program, chambered in the British .38/200 caliber already in use in the Enfield No 2 Mk I Revolver and the Webley Mk IV Revolver. Most Victory Models sent to Britain were fitted with 4-inch or 5-inch barrels, although a few early versions had 6-inch barrels. [8] [9] The 5-inch barrel was standard production after 4 April 1942. The Office of Strategic Services (OSS) supplied thousands of these revolvers to resistance forces. Thousands of Victory Model revolvers remained in United States Army inventories following World War II for arming foreign military and security personnel. [7]

An additional 352,315 [7] Victory Model revolvers chambered in the .38 Special cartridge were used by United States forces during World War II. The Victory Model was a standard-issue sidearm for United States Navy and Marine Corps aircrews and was also used by security guards at factories and defense installations throughout the United States during the war. [10] Although the latter personnel could use conventional lead bullets, Remington Arms manufactured REM UMC 38 SPL headstamped cartridges loaded with a 158 gr (10.2 g) full metal jacket bullet for military use in overseas combat zones. Tracer ammunition was manufactured for signaling purposes. [7]

Initial production of 65,000 4-inch-barreled revolvers for Navy aircrew bypassed standard procurement procedures, and quality suffered without traditional inspection procedures. Quality improved when Army ordnance inspectors became involved in early 1942, and the design was modified in 1945 to include an improved hammer block after a sailor was killed by a loaded revolver discharging when accidentally dropped onto a steel deck. Many aircrews preferred to carry the revolver rather than the heavier M1911 pistol. Pilots often preferred a shoulder holster in the confined space of a cockpit, but a hip holster was also available for security personnel. [7]

Some of these revolvers remained in service well into the 1990s with units of the United States Armed Forces, including the United States Air Force and the Coast Guard. Until the introduction of the Beretta M9 9mm pistol in 1990, U.S. Army helicopter crew members and female military police were equipped with .38 caliber Victory Model revolvers. Five hundred revolvers with two-inch barrels were delivered on 22 August 1944 [7] for Criminal Investigation Division agents. The Victory Model remained in use with Air National Guard tanker and transport crews as late as Operation Desert Storm in 1991, and with United States Navy security personnel until 1995. [11]

Some Lend-Lease Victory Model revolvers originally chambered for the British .38/200 were returned to the United States and rechambered to fire the more popular and more powerful .38 Special ammunition, and such revolvers are usually so marked on their barrels. Rechambering of .38-200 cylinders to .38 Special results in oversized chambers, which may cause problems.

Lee Harvey Oswald used a Victory Model to murder J.D. Tippit shortly after assassinating President John F. Kennedy. It was found in his possession when he was apprehended on November 22, 1963. [12]

The finish on Victory Models was typically a sandblasted and parkerized finish, which is noticeably different from the higher-quality blue or nickel/chrome finishes usually found on commercial M&P/Model 10 revolvers. Other distinguishing features of the Victory Model revolver are the lanyard loop at the bottom of the grip frame, and the use of smooth (rather than checkered) walnut grip panels. However, some early models did use a checkered grip, most notably the pre-1942 manufacture. [13]

Model 10

After World War II, Smith & Wesson returned to manufacturing the M&P series. Along with cosmetic changes and the replacement of the frame fitting grip with the Magna stocks, the spring-loaded hammer block safety gave way to a cam-actuated hammer block that rode in a channel in the side plate (Smith 1968). In the late 1950s, Smith & Wesson adopted the convention of using numeric designations to distinguish their various models of handguns, and the M&P was renamed the Model 10. [11]

The M&P/Model 10 has been available in both blued steel finish and nickel finish for most of its production run. The model has also been offered throughout the years with both the round butt and square butt grip patterns. Beginning with the Model 10–5 series in the late 1960s, the tapered barrel and its trademark 'half moon' front sight (as shown in the illustrations on this page) were replaced by a straight bull barrel and a sloped milled ramp front sight. Late model Model 10s are capable of handling any .38 Special cartridge produced today up to and including +P+ rounds. [11]

As of 2012 the Model 10 was available only in a 4-inch barrel model, as was its stainless steel (Inox) counterpart, the Smith & Wesson Model 64. [14] Some 6,000,000 M&P revolvers have been produced over the years, making it the most popular handgun of the 20th century. [15]

Combat Use

The "92 espagnol", a Spanish-made copy of Smith & Wesson's M&P as used by the French Milice during World War II and chambered in 8mm French Ordnance. Bundesarchiv Bild 101I-720-0318-36, Frankreich, Milizionar bewacht Widerstandskampfer.jpg
The "92 espagnol", a Spanish-made copy of Smith & Wesson's M&P as used by the French Milice during World War II and chambered in 8mm French Ordnance.

Many of the S&W Military & Police revolvers were captured and used by some of the police forces, such as the Austrian Police, during the occupation after World War II. It is incorrect to refer to them as "the Model 10" as model numbers were not introduced by Smith & Wesson until 1957. Note that, during the First World War, copies (slightly undersized) of the Military & Police were produced in Eibar and Guernica (Spain), in 8mm 1892 caliber for the French armies; the Milice man on the right holds such a copy.

The weapon is currently[ when? ] used by French cash couriers and banks, Disciplined Services of Hong Kong, Myanmar Police Force officers and other Burmese paramilitary units, Peruvian National Police and other police units.

Model 10 variants

Smith and Wesson Model 10-5 Smith and Wesson Model 10-5.jpg
Smith and Wesson Model 10-5
Table of modifications [16]
ModelYearModifications
101957Introduction
10-11959Heavy barrel introduced
10-21961Change extractor rod thread for standard barrel
10-31961Change extractor rod thread for heavy barrel, change front sight width from 1/10" to 1/8"
10-41962Eliminate trigger-guard screw on standard barrel frame
10-51962Change sight width from 1/10" to 1/8" on standard barrel
10-61962Eliminate trigger-guard screw on heavy-barrel frame
10-71977Change gas ring from yoke to cylinder for standard barrel
10-81977Change gas ring from yoke to cylinder for heavy barrel
10-91988Replace yoke retention system, radius stud package, floating hand hammer nose bushing for standard barrel
10-101988Replace yoke retention system, radius stud package, floating hand hammer nose bushing for heavy barrel
10-111997MIM hammer/trigger and floating firing pin for standard barrel and HB heavy barrel Model M10 Park police model.
10-121997MIM hammer/trigger + floating firing pin for heavy barrel
10-132002Limited production 1899 commemorative edition
10-142002Internal lock added
10-142010Discontinued
10-142012Reintroduced as part of the Classic Line

.357 Magnum variations

After a small prototype run of Model 10-6 revolvers in .357 Magnum caliber, Smith & Wesson introduced the Model 13 heavy barrel in carbon steel and then the Model 65 in stainless steel. Both revolvers featured varying barrel weights and lengths—generally three and four inches with and without underlugs (shrouds). Production dates began in 1974 for the Model 13 and ended upon discontinuation in 1999. The Model 65 was in production from 1972 to 1999. [3] Both the blued and stainless models were popular with police and FBI, and a variation of the Model 65 was marketed in the Lady Smith line from 1992 to 1999.

.38 S&W variations

From the late 1940s to early 1960s Smith & Wesson made a Variation of the Model 10 chambered for .38 S&W called the Model 11 [17] that was sent to British Commonwealth countries to supply their armies [17] and police forces. They were sent to Canada as well.

Clones

A few copies of Smith & Wesson Model 10 were produced in Israel by Israel Military Industries (IMI) as the Revolver IMI 9mm. The weapon was chambered in the 9mm Luger caliber, instead of .38 Special, the original caliber. [18] [19] Also, Norinco of China has manufactured the NP50, which is a copy of the Smith & Wesson Model 64, since 2000.

Replacement

The S&W Model 10 revolver was a popular weapon before the semi-automatic pistol replaced the revolver in many police departments, as well as police units and armies.

Users

See also

Related Research Articles

<span class="mw-page-title-main">Revolver</span> Firearm with a cylinder holding cartridges

A revolver is a repeating handgun that has at least one barrel and uses a revolving cylinder containing multiple chambers for firing. Because most revolver models hold up to six cartridges, before needing to be reloaded, revolvers are commonly called six shooters or sixguns. Due to their rotating cylinder mechanism, they may also be called wheel guns.

<span class="mw-page-title-main">.38 Special</span> Revolver cartridge designed by Smith & Wesson

The .38 Special, also commonly known as .38 S&W Special, .38 Smith & Wesson Special, .38 Spl, .38 Spc, or 9x29mmR is a rimmed, centerfire cartridge designed by Smith & Wesson.

<span class="mw-page-title-main">Smith & Wesson</span> American manufacturer of firearms and ammunition

Smith & Wesson Brands, Inc. (S&W) is an American firearm manufacturer headquartered in Maryville, Tennessee, United States.

<span class="mw-page-title-main">.40 S&W</span> Pistol cartridge

The .40 S&W (10.2x22mm) is a rimless pistol cartridge developed jointly by American firearms manufacturers Smith & Wesson and Winchester in 1990. The .40 S&W was developed as a law enforcement cartridge designed to duplicate performance of the Federal Bureau of Investigation's (FBI) reduced-velocity 10mm Auto cartridge which could be retrofitted into medium-frame semi-automatic handguns. It uses 0.40-inch (10 mm) diameter bullets ranging in weight from 105 to 200 grains.

<span class="mw-page-title-main">Smith & Wesson Model 29</span> Revolver

The Smith & Wesson Model 29 is a six-shot, double-action revolver chambered for the .44 Magnum cartridge and manufactured by the United States company Smith & Wesson.

<span class="mw-page-title-main">10mm Auto</span> Firearm cartridge

The 10mm Auto is a powerful and versatile semi-automatic pistol cartridge introduced in 1983. Its design was adopted and later produced by ammunition manufacturer FFV Norma AB of Åmotfors, Sweden.

<span class="mw-page-title-main">Smith & Wesson Model 19</span> Revolver

The Smith & Wesson Model 19 is a revolver produced by Smith & Wesson that was introduced in 1957 on its K-frame. The Model 19 is chambered for .357 Magnum. The K-frame is somewhat smaller and lighter than the original N-frame .357, usually known as the Smith & Wesson Model 27. A stainless steel variant of the Model 19, the Smith & Wesson Model 66, was introduced in 1971.

<span class="mw-page-title-main">Smith & Wesson Model 686</span> Revolver

The Smith & Wesson Model 686 is a six- or seven-shot double-action revolver manufactured by Smith & Wesson and chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. Smith & Wesson introduced the Model 686 in 1981. It is the stainless steel version of the Model 586, which featured a blued steel finish. They are available ported and unported with a choice of 6- or 7-round cylinders.

<span class="mw-page-title-main">M1917 Revolver</span> Revolver

The M1917 Revolvers were six-shot, .45 ACP, large frame double action revolvers adopted by the United States Military in 1917, to supplement the standard M1911 pistol during World War I. There were two variations of the M1917, one made by Colt and the other by Smith & Wesson. They used moon-clips to hold the cartridges in position, facilitate reloading, and to aid in extraction since revolvers had been designed to eject rimmed cartridges and .45 ACP rounds were rimless for use with the magazine-fed M1911. After World War I, they gained a strong following among civilian shooters. A commercial rimmed cartridge, the .45 Auto Rim, was also developed, so M1917 revolvers could eject cartridge cases without using moon-clips.

<span class="mw-page-title-main">Pocket pistol</span> Term for a small, pocket-sized semi-automatic pistol

In American English, a pocket pistol is any small, pocket-sized semi-automatic pistol, and is suitable for concealed carry in a pocket or a similar small space.

<span class="mw-page-title-main">Smith & Wesson Model 15</span> Revolver

The Smith & Wesson Model 15, initially the Smith & Wesson K-38 Combat Masterpiece, is a six-shot double-action revolver with adjustable open sights produced by Smith & Wesson on the medium-size "K" frame. It is chambered for the .38 Special cartridge and is fitted with a 4-inch (100 mm) barrel, though additional barrel options have been offered at various times during its production. It is essentially a shorter barrel version of the Smith & Wesson Model 14 and an adjustable-sight version of the seminal Smith & Wesson Model 10 with target shooting features.

<span class="mw-page-title-main">Smith & Wesson Model 39</span> Semi-automatic pistol

The Smith & Wesson Model 39 is a semi-automatic pistol developed for the United States Army service pistol trials of 1954. After the Army abandoned its search for a new pistol, the Model 39 went on the civilian market in 1955 and was the first of Smith & Wesson's first generation semi-automatic pistols.

<span class="mw-page-title-main">Smith & Wesson Model 3</span> Single-action, cartridge-firing, top-break revolver

The Smith & Wesson Model 3 is a single-action, cartridge-firing, top-break revolver produced by Smith & Wesson (S&W) from around 1870 to 1915, and was recently again offered as a reproduction by Smith & Wesson and Uberti.

<span class="mw-page-title-main">Snubnosed revolver</span> Type of gun

A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 4 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.

<span class="mw-page-title-main">Colt Detective Special</span> Revolver

The Colt Detective Special is a six-shot, carbon steel framed, 2-inch (5.1 cm) or 3-inch (7.6 cm) barreled, double-action revolver, and the first example of a class of firearms known as "snubnose revolvers". Made by Colt's Manufacturing Company, this model revolver, as the name "Detective Special" suggests, was intended to be a concealed weapon used by plainclothes police detectives.

<span class="mw-page-title-main">Smith & Wesson Model 13</span> US Revolver

The Smith & Wesson Model 13 is a .357 Magnum revolver designed for military and police use. It is based on Smith & Wesson's K-frame—specifically, it is a .357 Magnum version of the heavy-barrel variant of the .38 Special Model 10.

<span class="mw-page-title-main">Handgun</span> Short-barreled firearm designed to be held and used with one hand

A handgun is a firearm designed to be usable with only one hand. It is distinguished from a long gun which needs to be held by both hands and braced against the shoulder. Handguns have shorter effective ranges compared to long guns, and are much harder to shoot accurately. While most early handguns are single-shot pistols, the two most common types of handguns used in modern times are revolvers and semi-automatic pistols, although other handguns such as derringers and machine pistols also see infrequent usage.

<span class="mw-page-title-main">Colt Official Police</span> Revolver

The Colt Official Police is a medium frame, double-action revolver with a six-round cylinder, primarily chambered for the .38 Special cartridge, and manufactured by the Colt's Manufacturing Company. Released in 1908 as the Colt Army Special, the revolver was renamed the "Colt's Official Police" in 1927 in order to better market to law enforcement agencies. It became one of the bestselling police firearms of all time, eventually coming to exemplify typical law enforcement officer weaponry in the 1950s. The Official Police was also used by various U.S. and allied military forces during World War II.

<span class="mw-page-title-main">Ruger Security-Six</span> American revolver

The Ruger Security-Six and its variants, the Service-Six and Speed-Six are a product line of double-action revolvers introduced in 1972 and manufactured until 1988 by Sturm, Ruger & Co. These revolvers were marketed to law enforcement duty issue, military, and civilian self-defense markets.

<span class="mw-page-title-main">Smith & Wesson Model 2</span> Revolver

The Smith & Wesson Model 2, also referred to as the Smith & Wesson .38 Single Action, was a .38 caliber revolver produced in both single and double action by Smith & Wesson. The manufacturer's first of that caliber, its 5-shot cyclinder was chambered in .38 S&W. The single-action was produced in three varieties from 1876 through 1911, with total production exceeding 223,000 units; the double-action in three variants from 1880 to 1913, with total sales somewhat under one-million guns.

References

  1. "Arms for freedom". 29 December 2017. Archived from the original on April 7, 2018. Retrieved 2019-08-31.
  2. "J, K, L, N, M? E-I-E-I-O… Demystifying All Those S&W Frame Types". 11 April 2022.
  3. 1 2 3 4 Supica, Jim; Richard Nahas (2001). Standard Catalog of Smith & Wesson. Iola Wisconsin: Krause Publications. p. 1068.
  4. Boorman, Dean K., The History of Smith & Wesson Firearms (2002), p. 46: "The .38 in Military and Police Model 10 has historically been the mainstay of the Smith & Wesson Company, with some 6,000,000 of this general type produced to date. It was the most commonly used police sidearm in the United States from the 1920s to the 1970s. It has been described as the most successful handgun of all time, and the most popular centerfire revolver of the 20th Century."
  5. 1 2 3 Cumpston, Mike (2003-01-16). "The First M&P". Gunblast.com. Retrieved 2008-05-02.
  6. http://sportsmansvintagepress.com/read-free/smith-wesson-hand-guns/sw-terrier/ Smith & Wesson did not succumb to the fad for short-barreled revolvers until 1936 when the firm brought out what was termed the "S&W .38/32 2″," later christened the "Terrier" which was simply the round butt Regulation Police Model with a two-inch barrel.
  7. 1 2 3 4 5 6 Canfield, Bruce N. (2020). "The Smith & Wesson Victory Model Revolver". American Rifleman . 168 (11). National Rifle Association of America: 46–51.
  8. Shore, C. (Capt), With British Snipers to the Reich, Paladin Press (1988), p. 55
  9. Dunlap, Roy, Ordnance Went Up Front, Samworth Press (1948), p. 142
  10. Ayoob, Massad (15 March 2010). Massad Ayoob's Greatest Handguns of the World. Iola, Wisconsin: Gun Digest Books. p. 71. ISBN   978-1-4402-1503-2.
  11. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Supica, Jim; Nahas, Richard (2007). Standard Catalog of Smith & Wesson. Iola, Wisconsin: F+W Media, Inc. pp. 141–143, 174, 210–211. ISBN   978-0-89689-293-4.
  12. Martin, Orlando (January 2010). JFK. Analysis of a Shooting: The Ultimate Ballistics Truth Exposed. Dog Ear Publishing. pp. 118–119. ISBN   978-1-60844-315-4.
  13. Hunter, Hunter (2009). "S&W Victory & Colt Commando Revolvers". American Rifleman. 157 (6): 36–37. ISSN   0003-083X.
  14. Shideler, Dan (7 August 2011). Gun Digest 2012. Iola, Wisconsin: Gun Digest Books. p. 420. ISBN   978-1-4402-1447-9.
  15. Boorman, Dean K., The History of Smith & Wesson Firearms (2002), p. 46: "The .38 in Military and Police Model 10 has historically been the mainstay of the Smith & Wesson Company, with some 6,000,000 of this general type produced to date. It has been described as the most successful handgun of all time, and the most popular centerfire revolver of the 20th Century."
  16. Supica, Jim; Nahas, Richard (2016). Standard Catalog of Smith and Wesson (4th ed.). Iola, WI: Gun Digest. p. 204. ISBN   978-1-4402-4563-3 . Retrieved 6 January 2020.
  17. 1 2 "Wiley Clapp: The .38 S&W—Isn't That Special?". www.americanrifleman.org. Retrieved 2018-08-09.
  18. "The Mystery of the IMI 9mm Revolver". 12 May 2015.
  19. "Rock Island Auction: I.M.I. (Israeli) - M&P". www.rockislandauction.com.
  20. "World Infantry Weapons: Algeria". 2015. Archived from the original on 24 November 2016.
  21. 1 2 3 Arnold, David (28 February 2011). Classic Handguns of the 20th Century. Iola, Wisconsin: Gun Digest Books. p. 33. ISBN   978-1-4402-2640-3.
  22. "Arms for freedom". 29 December 2017.
  23. Ezell, Edward (1988). Small Arms Today. Vol. 2nd. Stackpole Books. p. 199. ISBN   0811722805.
  24. "WWII weapons in the Ayatollah's Iran". wwiiafterwwii.wordpress.com. 16 October 2016.[ self-published source ]
  25. Sugiura, Hisaya (September 2015). "Pistols of the Japanese police in the postwar era". Gun Professionals  [ ja ]. Hobby Japan. pp. 72–79.
  26. Conboy, Kenneth (23 Nov 1989). The War in Laos 1960–75. Men-at-Arms 217. Osprey Publishing. p. 15. ISBN   9780850459388.
  27. "World Infantry Weapons: Libya". Archived from the original on 5 October 2016.
  28. "Back from Nicaragua!". 28 May 2014.
  29. Rottman, Gordon (2010). Panama 1989-90. Elite. Vol. 37. Osprey Publishing. pp. 14, 15, 57, 62, 63. ISBN   9781855321564.
  30. de Quesada, Alejandro (20 November 2011). The Chaco War 1932-35: South America's greatest modern conflict. Men At Arms No. 474. Osprey Publishing. pp. 18, 44. ISBN   978-1-84908-901-2.
  31. "Smith & Wesson .38 / NAM 64-75". www.nam-valka.cz.
  32. Rottman, Gordon L. (2010). Army of the Republic of Vietnam 1955–75. Men at Arms No. 458. Osprey. ISBN   9781849081818.
  33. Schwing, Ned (5 November 2005). Standard Catalog of Military Firearms: The Collector's Price and Reference Guide. Iola, Wisconsin: Krause Publications. p. 323. ISBN   978-0-87349-902-6.