SuperDraco

Last updated
SuperDraco
SuperDraco rocket engines at SpaceX Hawthorne facility (16789102495).jpg
A pair of SuperDraco rocket engines at SpaceX Hawthorne facility
Country of origin United States
Manufacturer SpaceX
Application Launch escape system, propulsive landing [1]
StatusOperational
Liquid-fuel engine
Propellant NTO [2] [3] / MMH [2] [3]
Performance
Thrust, sea-level71 kN (16,000 lbf), [4] individually
32,000 lbf, dual-engine cluster [5]
Chamber pressure 6.9 MPa (1,000 psi) [1]
Specific impulse, sea-level235 s (2.30 km/s) [6]
Burn time25 seconds [6]
Propellant capacity1,388 kg (3,060 lb) [3]
Used in
SpaceX Dragon 2 - Crew, DragonFly

SuperDraco is a hypergolic propellant rocket engine designed and built by SpaceX. It is part of the SpaceX Draco family of rocket engines. A redundant array of eight SuperDraco engines provides fault-tolerant propulsion for use as a launch escape system for the SpaceX Dragon 2, a passenger-carrying space capsule.

Contents

SuperDraco rocket engines utilize a storable (non-cryogenic) hypergolic propellant which allows the engines to be fired many months after fueling and launch. They combine the functions of both a reaction control system and a main propulsive engine. Hypergolic fuels do not require an external source of ignition, providing increased reliability for the spacecraft. [7]

The engines are used on crew transport flights to low Earth orbit, and were also projected to be used for entry, descent and landing control of the now-canceled Red Dragon to Mars.

SuperDracos are used on the SpaceX Dragon 2 crew-transporting space capsule and were used on the DragonFly, a prototype low-altitude reusable rocket that was used for flight testing various aspects of the propulsive-landing technology. While the engine is capable of 73,000 newtons (16,400 lbf) of thrust, during use for DragonFly testing, the engines were throttled to 68,170 newtons (15,325 lbf) to maintain vehicle stability. [6]

History

On February 1, 2012 SpaceX announced that it had completed the development of a new, more powerful version of a storable-propellant rocket engine, this one called SuperDraco. This high-thrust hypergolic engine—about 200 times more powerful than the Draco RCS thruster hypergolic engine—offers deep throttling ability, [8] and just like the Draco thruster, was designed to provide multiple restart capability and use the same shared hypergolic propellants as Draco. Its primary purpose was to be for SpaceX's launch abort system (LAS) on the Dragon spacecraft. According to a NASA press release, the engine has a transient from ignition to full thrust of 100 ms. During launch abort, eight SuperDracos were expected to fire for 5 seconds at full thrust. The development of the engine was partially funded by NASA's CCDev 2 program.

Name: Draco comes from the Greek drakōn for dragon. Draco (constellation) is a constellation (the Dragon) in the polar region of the Northern Hemisphere near Cepheus and Ursa Major.

Design

SuperDraco engines use a storable propellant mixture of monomethylhydrazine [2] fuel and dinitrogen tetroxide [2] oxidizer. They are capable of being restarted many times, and have the capability to deeply reduce their thrust providing precise control during propulsive landing of the Dragon capsule. [9]

SuperDraco is the third most powerful engine developed by SpaceX. It is approximately 200 times [10] as powerful as the Draco thruster engine. By comparison, it is more than twice as powerful as the Kestrel engine that was used in SpaceX's Falcon 1 launch vehicle second stage, about 1/9 the thrust of a Merlin 1D engine, and expected to be 1/26th as powerful as the SpaceX Raptor engine.

In addition to the use of the SuperDraco thrusters for powered-landings on Earth, NASA's Ames Research Center was studying the feasibility of a Dragon-derived Mars lander for scientific investigation until 2017. [11] Preliminary analysis in 2011 indicated that the final deceleration would be within the retro-propulsion SuperDraco thruster capabilities. [11] [12]

SuperDraco is designed to be highly throttleable, from 100 to 20% of full thrust. [8] This would have been used for precision controllable propulsive landings of the Dragon V2 spacecraft.

Engine testing

SuperDraco test-fire mosaic SuperDraco Test Fire Mosaic.jpg
SuperDraco test-fire mosaic

The SuperDraco engine development program had an extensive test program that spanned several years. As of December 2012, the SuperDraco ground-test engines had been fired a total of 58 times for a total firing-time duration of 117 seconds and SpaceX expressed hope that the test results would exceed the original requirements for the engine. [13]

A second version of the engine was developed in 2013, this one manufactured with 3D printing rather than the traditional casting technique. By July 2014, the 3D-printed engine combustion chamber had been fired over 80 times, for a total duration of more than 300 seconds, and it likewise completed a full qualification test. [8]

The SuperDraco completed qualification testing in May 2014 – including testing "across a variety of conditions including multiple starts, extended firing durations and extreme off-nominal propellant flow and temperatures." [9]

By January 2015, SpaceX demonstrated the SuperDraco engine pod with full functionality at McGregor, Texas. Four of these engine pods, each containing two SuperDraco engines, will be used in the Dragon 2 crewed spacecraft. [14]

In April 2015, SpaceX and NASA set a timeframe to test a Dragon 2's SuperDraco engines with a pad abort test. The test eventually occurred on May 6, 2015, from a test stand at Cape Canaveral Air Force Station SLC-40. [15] and was successful. [16]

On April 20, 2019, the SpaceX Crew Dragon capsule used on DM-1 was destroyed during a test of the SuperDraco engines at Landing Zone 1. [17]

Manufacturing

On September 5, 2013 Elon Musk tweeted an image of a regeneratively cooled SuperDraco rocket chamber emerging from an EOS 3D metal printer, and indicated that it was composed of the Inconel superalloy. [18] This was later shown to be the production technique for the flight-level engines.

It was announced in May 2014 that the flight-qualified version of the SuperDraco engine is the first[ clarification needed ] fully 3D printed rocket engine. In particular, the engine combustion chamber is printed of Inconel, an alloy of nickel and iron, using a process of direct metal laser sintering, and operates at a chamber pressure 6,900 kilopascals (1,000 psi) at a very high temperature.[ clarification needed ] The engines are contained in a printed protective nacelle to prevent fault propagation in the event of an engine failure. [1] [19] [20]

The ability to 3D print the complex parts was key to achieving the low-mass objective of the engine. According to Elon Musk, "It’s a very complex engine, and it was very difficult to form all the cooling channels, the injector head, and the throttling mechanism. Being able to print very high strength advanced alloys ... was crucial to being able to create the SuperDraco engine as it is." [21]

The 3D printing process for the SuperDraco engine dramatically reduces lead-time compared to the traditional cast parts, and "has superior strength, ductility, and fracture resistance, with a lower variability in materials properties." [8]

According to Elon Musk, cost reduction through 3D printing is also significant, in particular because SpaceX can print an hourglass chamber where the entire wall consists of internal cooling channels, which would be impossible without additive manufacturing. [22]

See also

Related Research Articles

<span class="mw-page-title-main">Hypergolic propellant</span> Type of rocket engine fuel

A hypergolic propellant is a rocket propellant combination used in a rocket engine, whose components spontaneously ignite when they come into contact with each other.

<span class="mw-page-title-main">SpaceX</span> American private spacecraft company

Space Exploration Technologies Corporation, commonly referred to as SpaceX, is an American spacecraft manufacturer, launch service provider and satellite communications company headquartered at the SpaceX Starbase near Brownsville, Texas after first being established in 2002 in Southern California, where it still has significant operations. The company was founded by Elon Musk with the goal of reducing space transportation costs by designing for reusability and ultimately developing a sustainable colony on Mars. SpaceX currently produces and operates the Falcon 9 and Falcon Heavy rockets along with the Dragon spacecraft.

<span class="mw-page-title-main">SpaceX Merlin</span> Rocket engine in SpaceX Falcon launch vehicles

Merlin is a family of rocket engines developed by SpaceX. They are currently a part of the Falcon 9 and Falcon Heavy launch vehicles, and were formerly used on the Falcon 1. Merlin engines use RP-1 and liquid oxygen as rocket propellants in a gas-generator power cycle. The Merlin engine was originally designed for sea recovery and reuse, but since 2016 the entire Falcon 9 booster is recovered for reuse by landing vertically on a landing pad using one of its nine Merlin engines.

<span class="mw-page-title-main">Launch escape system</span> A system to get the crew to safety if a rocket launch fails

A launch escape system (LES) or launch abort system (LAS) is a crew-safety system connected to a space capsule. It is used in the event of a critical emergency to quickly separate the capsule from its launch vehicle in case of an emergency requiring the abort of the launch, such as an impending explosion. The LES is typically controlled by a combination of automatic rocket failure detection, and a manual activation for the crew commander's use. The LES may be used while the launch vehicle is on the launch pad, or during its ascent. Such systems are usually of three types:

<span class="mw-page-title-main">Pressure-fed engine</span> Rocket engine operation method

The pressure-fed engine is a class of rocket engine designs. A separate gas supply, usually helium, pressurizes the propellant tanks to force fuel and oxidizer to the combustion chamber. To maintain adequate flow, the tank pressures must exceed the combustion chamber pressure.

<span class="mw-page-title-main">VTVL</span> Method of takeoff and landing used by rockets; vertical takeoff, vertical landing

Vertical takeoff, vertical landing (VTVL) is a form of takeoff and landing for rockets. Multiple VTVL craft have flown. The most successful VTVL vehicle was the Apollo Lunar Module which delivered the first humans to the Moon. Building on the decades of development, SpaceX utilised the VTVL concept for its flagship Falcon 9 first stage, which has delivered over three hundred successful powered landings so far.

<span class="mw-page-title-main">Pintle injector</span> Propellant injection device for a rocket engine.

The pintle injector is a type of propellant injector for a bipropellant rocket engine. Like any other injector, its purpose is to ensure appropriate flow rate and intermixing of the propellants as they are forcibly injected under high pressure into the combustion chamber, so that an efficient and controlled combustion process can happen.

<span class="mw-page-title-main">SpaceX Draco</span> Line of hypergolic liquid rocket engines by SpaceX

The SpaceX Draco is a hypergolic liquid rocket engine designed and built by SpaceX for use in their space capsules. Two engine types have been built to date: Draco and SuperDraco.

<span class="mw-page-title-main">SpaceX CRS-2</span> 2013 American resupply spaceflight to the ISS

SpaceX CRS-2, also known as SpX-2, was the fourth flight for SpaceX's uncrewed Dragon cargo spacecraft, the fifth and final flight for the company's two-stage Falcon 9 v1.0 launch vehicle, and the second SpaceX operational mission contracted to NASA under a Commercial Resupply Services (CRS-1) contract.

<span class="mw-page-title-main">SpaceX rocket engines</span> Rocket engines developed by SpaceX

Since the founding of SpaceX in 2002, the company has developed four families of rocket engines — Merlin, Kestrel, Draco and SuperDraco — and since 2016 developed the Raptor methane rocket engine and after 2020, a line of methalox thrusters.

<span class="mw-page-title-main">Falcon 9 v1.1</span> Second version of the SpaceX medium-lift launch vehicle

Falcon 9 v1.1 was the second version of SpaceX's Falcon 9 orbital launch vehicle. The rocket was developed in 2011–2013, made its maiden launch in September 2013, and its final flight in January 2016. The Falcon 9 rocket was fully designed, manufactured, and operated by SpaceX. Following the second Commercial Resupply Services (CRS) launch, the initial version Falcon 9 v1.0 was retired from use and replaced by the v1.1 version.

<span class="mw-page-title-main">Falcon 9 v1.0</span> First version of the SpaceX medium-lift launch vehicle

The Falcon 9 v1.0 was the first member of the Falcon 9 launch vehicle family, designed and manufactured by SpaceX in Hawthorne, California. Development of the medium-lift launcher began in 2005, and it first flew on June 4, 2010. The Falcon 9 v1.0 then launched four Dragon cargo spacecraft: one on an orbital test flight, then one demonstration and two operational resupply missions to the International Space Station under a Commercial Resupply Services contract with NASA.

<span class="mw-page-title-main">Tom Mueller</span> American aerospace engineer and rocket engine designer

Thomas John Mueller is an American aerospace engineer and rocket engine designer. He was employee No.1 of SpaceX and is the founder and now CEO of Impulse Space.

Dragon 2 <i>DragonFly</i> SpaceX Dragon 2 spacecraft prototype

The Dragon 2 DragonFly was a prototype suborbital rocket-powered test vehicle for a propulsively-landed version of the SpaceX Dragon 2. DragonFly underwent testing in Texas at the McGregor Rocket Test Facility in October 2015. However, the development eventually ceased as the verification burden imposed by NASA was too great to justify it.

<span class="mw-page-title-main">SpaceX Dragon 2</span> 2020s class of partially reusable spacecraft

Dragon 2 is a class of partially reusable spacecraft developed, manufactured, and operated by American space company SpaceX for flights to the International Space Station (ISS) and private spaceflight missions. The spacecraft, which consists of a reusable space capsule and an expendable trunk module, has two variants: the 4-person Crew Dragon and Cargo Dragon, a replacement for the Dragon 1 cargo capsule. The spacecraft launches atop a Falcon 9 Block 5 rocket, and the capsule returns to Earth through splashdown. Since 2020, when Dragon 2 flew its first crewed and uncrewed flights, it has proven to be the most cost-effective spacecraft ever used by NASA.

3D printing began to be used in production versions of spaceflight hardware in early 2014, when SpaceX first flew a flight-critical propulsion system assembly on an operational Falcon 9 flight. A number of other 3D-printed spacecraft assemblies have been ground-tested, including high-temperature, high-pressure rocket engine combustion chambers and the entire mechanical spaceframe and integral propellant tanks for a small satellite.

<span class="mw-page-title-main">SpaceX Starship</span> Reusable super heavy-lift launch vehicle

Starship is a two-stage fully reusable super heavy-lift launch vehicle under development by SpaceX. As of September 2024, it is the most massive and powerful vehicle ever to fly. SpaceX has developed Starship with the intention of lowering launch costs using economies of scale. SpaceX aims to achieve this by reusing both rocket stages, increasing payload mass to orbit, returning both stages to be "caught" by the launch tower, increasing launch frequency, creating a mass-manufacturing pipeline and adapting it to a wide range of space missions. Starship is the latest project in SpaceX's reusable launch system development program and plan to colonize Mars.

<span class="mw-page-title-main">SpaceX Raptor</span> SpaceX family of liquid-fuel rocket engines

Raptor is a family of rocket engines developed and manufactured by SpaceX. It is the third rocket engine in history designed with a full-flow staged combustion (FFSC) fuel cycle, and the first such engine to power a vehicle in flight. The engine is powered by cryogenic liquid methane and liquid oxygen, a mixture known as methalox.

<span class="mw-page-title-main">Crew Dragon In-Flight Abort Test</span> Post-launch abort test of the SpaceX Dragon 2 spacecraft

The Crew Dragon In-Flight Abort Test was a successful test of the SpaceX Dragon 2 abort system, conducted on 19 January 2020. It was the final assessment for the Crew Dragon capsule and Falcon 9 launch system before they would be certified to carry humans into space. Booster B1046.4 and an uncrewed capsule C205 were launched from Launch Complex 39A (LC-39A) on a suborbital trajectory, followed by an in-flight abort of the capsule at max Q and supersonic speed. The test was carried out successfully: the capsule pulled itself away from the booster after launch control commanded the abort, and landed safely.

<span class="mw-page-title-main">Crew Dragon Launch Abort System</span> The launch escape system of the crew dragon capsule

The Crew Dragon Launch Abort System is a propulsive device designed to accelerate the SpaceX Crew Dragon Spacecraft away from a failing rocket. It is equipped with 8 SuperDraco engines capable of generating 71 kN of thrust.

References

  1. 1 2 3 Bergin, Chris (2014-05-30). "SpaceX lifts the lid on the Dragon V2 crew spacecraft". NASAspaceflight.com. Retrieved 2014-05-30.
  2. 1 2 3 4 "SpaceX Demonstrates Astronaut Escape System for Crew Dragon Spacecraft". NASA. 6 May 2015. Retrieved 7 May 2015.
  3. 1 2 3 "Archived copy" (PDF). Archived from the original (PDF) on 2020-07-18. Retrieved 2019-09-24.{{cite web}}: CS1 maint: archived copy as title (link)
  4. ↑ "SpaceX Completes Qualification Testing of SuperDraco Thruster". 2014-05-28.
  5. ↑ "SuperDraco | Test Fire". YouTube. 2015-11-10.
  6. 1 2 3 James, Michael; Salton, Alexandria; Downing, Micah (November 12, 2013), Draft Environmental Assessment for Issuing an Experimental Permit to SpaceX for Operation of the Dragon Fly Vehicle at the McGregor Test Site, Texas, May 2014 – Appendices (PDF), Blue Ridge Research and Consulting, LCC, p. 12
  7. ↑ Clark, John (1972). Ignition! An Informal History of Liquid Rocket Propellants. Rutgers University Press. pp. 214–220. ISBN   978-0-8135-0725-5.
  8. 1 2 3 4 "SpaceX Launches 3D-Printed Part to Space, Creates Printed Engine Chamber for Crewed Spaceflight". SpaceX. 2014-07-31. Retrieved 2014-08-01. Compared with a traditionally cast part, a printed [part] has superior strength, ductility, and fracture resistance, with a lower variability in materials properties. ... The chamber is regeneratively cooled and printed in Inconel, a high performance superalloy. Printing the chamber resulted in an order of magnitude reduction in lead-time compared with traditional machining – the path from the initial concept to the first hotfire was just over three months. During the hotfire test, ... the SuperDraco engine was fired in both a launch escape profile and a landing burn profile, successfully throttling between 20% and 100% thrust levels. To date the chamber has been fired more than 80 times, with more than 300 seconds of hot fire.
  9. 1 2 "SuperDraco Thruster Powers Revolutionary Launch Escape System (Rocket Thruster Test)". Satnews Daily. 2014-05-27. Retrieved 2014-05-28.
  10. ↑ "SpaceX Test Fires Engine Prototype for Astronaut Escape System". NASA. 2012-02-01. Retrieved 2012-02-01.
  11. 1 2 "Red Dragon" (PDF), Feasibility of a Dragon-derived Mars lander for scientific and human-precursor investigations, 8m.net, October 31, 2011, archived from the original (PDF) on 2012-06-16, retrieved 2012-05-14
  12. ↑ "NASA ADVISORY COUNCIL (NAC) - Science Committee Report" (PDF). Ames Research Center, NASA. 1 November 2011. Archived from the original (PDF) on 2013-01-20. Retrieved 2012-05-01.
  13. ↑ Staff (2012-12-14). "NASA's Return On Investment Report" (PDF). Retrieved 2015-12-30.
  14. ↑ "Full functionality of Crew Dragon's SuperDraco jetpacks demonstrated with hotfire test in McGregor, TX". vine.co. Vine. Retrieved 24 January 2015.
  15. ↑ Clark, Stephen (21 April 2015). "Dragon pad abort test set for early May". Spaceflight Now.
  16. ↑ Berger, Eric (2016-04-30). "From zero to 100mph in 1.2 seconds, the SuperDraco thruster delivers". Ars Technica . Retrieved 2017-02-04.
  17. ↑ "SpaceX Crew Dragon spacecraft destroyed in test mishap, company confirms". www.cbsnews.com. Retrieved 2019-05-03.
  18. ↑ @elonmusk (5 September 2013). "SpaceX SuperDraco inconel rocket chamber w regen cooling jacket emerges from EOS 3D metal printer" (Tweet) – via Twitter.
  19. ↑ Norris, Guy (2014-05-30). "SpaceX Unveils 'Step Change' Dragon 'V2'". Aviation Week. Archived from the original on 2014-05-31. Retrieved 2014-05-30.
  20. ↑ Kramer, Miriam (2014-05-30). "SpaceX Unveils Dragon V2 Spaceship, a Manned Space Taxi for Astronauts — Meet Dragon V2: SpaceX's Manned Space Taxi for Astronaut Trips". space.com. Retrieved 2014-05-30.
  21. ↑ Foust, Jeff (2014-05-30). "SpaceX unveils its "21st century spaceship"". NewSpace Journal. Retrieved 2014-05-31.
  22. ↑ Elon Musk, Mike Suffradini (7 July 2015). Elon Musk comments on Falcon 9 explosion - Huge Blow for SpaceX (2015.7.7) (video). Archived from the original on 2015-09-06. Retrieved 2015-12-30.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.