In Euclidean geometry, a bicentric quadrilateral is a convex quadrilateral that has both an incircle and a circumcircle. The radii and centers of these circles are called inradius and circumradius, and incenter and circumcenter respectively. From the definition it follows that bicentric quadrilaterals have all the properties of both tangential quadrilaterals and cyclic quadrilaterals. Other names for these quadrilaterals are chord-tangent quadrilateral [1] and inscribed and circumscribed quadrilateral. It has also rarely been called a double circle quadrilateral [2] and double scribed quadrilateral. [3]
If two circles, one within the other, are the incircle and the circumcircle of a bicentric quadrilateral, then every point on the circumcircle is the vertex of a bicentric quadrilateral having the same incircle and circumcircle. [4] This is a special case of Poncelet's porism, which was proved by the French mathematician Jean-Victor Poncelet (1788–1867).
Examples of bicentric quadrilaterals are squares, right kites, and isosceles tangential trapezoids.
A convex quadrilateral ABCD with sides a, b, c, d is bicentric if and only if opposite sides satisfy Pitot's theorem for tangential quadrilaterals and the cyclic quadrilateral property that opposite angles are supplementary; that is,
Three other characterizations concern the points where the incircle in a tangential quadrilateral is tangent to the sides. If the incircle is tangent to the sides AB, BC, CD, DA at W, X, Y, Z respectively, then a tangential quadrilateral ABCD is also cyclic if and only if any one of the following three conditions holds: [5]
The first of these three means that the contact quadrilateralWXYZ is an orthodiagonal quadrilateral.
If E, F, G, H are the midpoints of WX, XY, YZ, ZW respectively, then the tangential quadrilateral ABCD is also cyclic if and only if the quadrilateral EFGH is a rectangle. [5]
According to another characterization, if I is the incenter in a tangential quadrilateral where the extensions of opposite sides intersect at J and K, then the quadrilateral is also cyclic if and only if ∠ JIK is a right angle. [5]
Yet another necessary and sufficient condition is that a tangential quadrilateral ABCD is cyclic if and only if its Newton line is perpendicular to the Newton line of its contact quadrilateral WXYZ. (The Newton line of a quadrilateral is the line defined by the midpoints of its diagonals.) [5]
There is a simple method for constructing a bicentric quadrilateral:
It starts with the incircle Cr around the centre I with the radius r and then draw two to each other perpendicular chords WY and XZ in the incircle Cr. At the endpoints of the chords draw the tangents a, b, c, d to the incircle. These intersect at four points A, B, C, D, which are the vertices of a bicentric quadrilateral. [6] To draw the circumcircle, draw two perpendicular bisectors p1, p2 on the sides of the bicentric quadrilateral a respectively b. The perpendicular bisectors p1, p2 intersect in the centre O of the circumcircle CR with the distance x to the centre I of the incircle Cr. The circumcircle can be drawn around the centre O.
The validity of this construction is due to the characterization that, in a tangential quadrilateral ABCD, the contact quadrilateral WXYZ has perpendicular diagonals if and only if the tangential quadrilateral is also cyclic.
The area K of a bicentric quadrilateral can be expressed in terms of four quantities of the quadrilateral in several different ways. If the sides are a, b, c, d, then the area is given by [7] [8] [9] [10] [11]
This is a special case of Brahmagupta's formula. It can also be derived directly from the trigonometric formula for the area of a tangential quadrilateral. Note that the converse does not hold: Some quadrilaterals that are not bicentric also have area [12] One example of such a quadrilateral is a non-square rectangle.
The area can also be expressed in terms of the tangent lengths e, f, g, h as [8] : p.128
A formula for the area of bicentric quadrilateral ABCD with incenter I is [9]
If a bicentric quadrilateral has tangency chords k, l and diagonals p, q, then it has area [8] : p.129
If k, l are the tangency chords and m, n are the bimedians of the quadrilateral, then the area can be calculated using the formula [9]
This formula cannot be used if the quadrilateral is a right kite, since the denominator is zero in that case.
If M, N are the midpoints of the diagonals, and E, F are the intersection points of the extensions of opposite sides, then the area of a bicentric quadrilateral is given by
where I is the center of the incircle. [9]
The area of a bicentric quadrilateral can be expressed in terms of two opposite sides and the angle θ between the diagonals according to [9]
In terms of two adjacent angles and the radius r of the incircle, the area is given by [9]
The area is given in terms of the circumradius R and the inradius r as
where θ is either angle between the diagonals. [13]
If M, N are the midpoints of the diagonals, and E, F are the intersection points of the extensions of opposite sides, then the area can also be expressed as
where Q is the foot of the perpendicular to the line EF through the center of the incircle. [9]
If r and R are the inradius and the circumradius respectively, then the area K satisfies the inequalities [14]
There is equality on either side only if the quadrilateral is a square.
Another inequality for the area is [15] : p.39, #1203
where r and R are the inradius and the circumradius respectively.
A similar inequality giving a sharper upper bound for the area than the previous one is [13]
with equality holding if and only if the quadrilateral is a right kite.
In addition, with sides a, b, c, d and semiperimeter s:
If a, b, c, d are the length of the sides AB, BC, CD, DA respectively in a bicentric quadrilateral ABCD, then its vertex angles can be calculated with the tangent function: [9]
Using the same notations, for the sine and cosine functions the following formulas holds: [16]
The angle θ between the diagonals can be calculated from [10]
The inradius r of a bicentric quadrilateral is determined by the sides a, b, c, d according to [7]
The circumradius R is given as a special case of Parameshvara's formula. It is [7]
The inradius can also be expressed in terms of the consecutive tangent lengths e, f, g, h according to [17] : p. 41
These two formulas are in fact necessary and sufficient conditions for a tangential quadrilateral with inradius r to be cyclic.
The four sides a, b, c, d of a bicentric quadrilateral are the four solutions of the quartic equation
where s is the semiperimeter, and r and R are the inradius and circumradius respectively. [18] : p. 754
If there is a bicentric quadrilateral with inradius r whose tangent lengths are e, f, g, h, then there exists a bicentric quadrilateral with inradius rv whose tangent lengths are where v may be any real number. [19] : pp.9–10
A bicentric quadrilateral has a greater inradius than does any other tangential quadrilateral having the same sequence of side lengths. [20] : pp.392–393
The circumradius R and the inradius r satisfy the inequality
which was proved by L. Fejes Tóth in 1948. [19] It holds with equality only when the two circles are concentric (have the same center as each other); then the quadrilateral is a square. The inequality can be proved in several different ways, one using the double inequality for the area above.
An extension of the previous inequality is [2] [21] : p. 141
where there is equality on either side if and only if the quadrilateral is a square. [16] : p. 81
The semiperimeter s of a bicentric quadrilateral satisfies [19] : p.13
where r and R are the inradius and circumradius respectively.
Moreover, [15] : p.39, #1203
and
Fuss' theorem gives a relation between the inradius r, the circumradius R and the distance x between the incenter I and the circumcenter O, for any bicentric quadrilateral. The relation is [1] [11] [22]
or equivalently
It was derived by Nicolaus Fuss (1755–1826) in 1792. Solving for x yields
Fuss's theorem, which is the analog of Euler's theorem for triangles for bicentric quadrilaterals, says that if a quadrilateral is bicentric, then its two associated circles are related according to the above equations. In fact the converse also holds: given two circles (one within the other) with radii R and r and distance x between their centers satisfying the condition in Fuss' theorem, there exists a convex quadrilateral inscribed in one of them and tangent to the other [23] (and then by Poncelet's closure theorem, there exist infinitely many of them).
Applying to the expression of Fuss's theorem for x in terms of r and R is another way to obtain the above-mentioned inequality A generalization is [19] : p.5
Another formula for the distance x between the centers of the incircle and the circumcircle is due to the American mathematician Leonard Carlitz (1907–1999). It states that [24]
where r and R are the inradius and the circumradius respectively, and
where a, b, c, d are the sides of the bicentric quadrilateral.
For the tangent lengths e, f, g, h the following inequalities holds: [19] : p.3
and
where r is the inradius, R is the circumradius, and x is the distance between the incenter and circumcenter. The sides a, b, c, d satisfy the inequalities [19] : p.5
and
The circumcenter, the incenter, and the intersection of the diagonals in a bicentric quadrilateral are collinear. [25]
There is the following equality relating the four distances between the incenter I and the vertices of a bicentric quadrilateral ABCD: [26]
where r is the inradius.
If P is the intersection of the diagonals in a bicentric quadrilateral ABCD with incenter I, then [27]
An inequality concerning the inradius r and circumradius R in a bicentric quadrilateral ABCD is [28]
where I is the incenter.
The lengths of the diagonals in a bicentric quadrilateral can be expressed in terms of the sides or the tangent lengths, which are formulas that holds in a cyclic quadrilateral and a tangential quadrilateral respectively.
In a bicentric quadrilateral with diagonals p, q, the following identity holds: [11]
where r and R are the inradius and the circumradius respectively. This equality can be rewritten as [13]
or, solving it as a quadratic equation for the product of the diagonals, in the form
An inequality for the product of the diagonals p, q in a bicentric quadrilateral is [14]
where a, b, c, d are the sides. This was proved by Murray S. Klamkin in 1967.
Let ABCD be a bicentric quadrilateral and O the center of its circumcircle. Then the incenters of the four triangles △OAB, △OBC, △OCD, △ODA lie on a circle. [29]
In geometry a quadrilateral is a four-sided polygon, having four edges (sides) and four corners (vertices). The word is derived from the Latin words quadri, a variant of four, and latus, meaning "side". It is also called a tetragon, derived from Greek "tetra" meaning "four" and "gon" meaning "corner" or "angle", in analogy to other polygons. Since "gon" means "angle", it is analogously called a quadrangle, or 4-angle. A quadrilateral with vertices , , and is sometimes denoted as .
A triangle is a polygon with three edges and three vertices. It is one of the basic shapes in geometry. A triangle with vertices A, B, and C is denoted .
A right triangle or right-angled triangle (British), or more formally an orthogonal triangle, formerly called a rectangled triangle, is a triangle in which one angle is a right angle, i.e., in which two sides are perpendicular. The relation between the sides and other angles of the right triangle is the basis for trigonometry.
In geometry, an altitude of a triangle is a line segment through a vertex and perpendicular to a line containing the side opposite the vertex. This line containing the opposite side is called the extended base of the altitude. The intersection of the extended base and the altitude is called the foot of the altitude. The length of the altitude, often simply called "the altitude", is the distance between the extended base and the vertex. The process of drawing the altitude from the vertex to the foot is known as dropping the altitude at that vertex. It is a special case of orthogonal projection.
In geometry, the nine-point circle is a circle that can be constructed for any given triangle. It is so named because it passes through nine significant concyclic points defined from the triangle. These nine points are:
In geometry, the incircle or inscribed circle of a triangle is the largest circle that can be contained in the triangle; it touches the three sides. The center of the incircle is a triangle center called the triangle's incenter.
In Euclidean geometry, a cyclic quadrilateral or inscribed quadrilateral is a quadrilateral whose vertices all lie on a single circle. This circle is called the circumcircle or circumscribed circle, and the vertices are said to be concyclic. The center of the circle and its radius are called the circumcenter and the circumradius respectively. Other names for these quadrilaterals are concyclic quadrilateral and chordal quadrilateral, the latter since the sides of the quadrilateral are chords of the circumcircle. Usually the quadrilateral is assumed to be convex, but there are also crossed cyclic quadrilaterals. The formulas and properties given below are valid in the convex case.
In geometry, the incenter of a triangle is a triangle center, a point defined for any triangle in a way that is independent of the triangle's placement or scale. The incenter may be equivalently defined as the point where the internal angle bisectors of the triangle cross, as the point equidistant from the triangle's sides, as the junction point of the medial axis and innermost point of the grassfire transform of the triangle, and as the center point of the inscribed circle of the triangle.
In geometry, the semiperimeter of a polygon is half its perimeter. Although it has such a simple derivation from the perimeter, the semiperimeter appears frequently enough in formulas for triangles and other figures that it is given a separate name. When the semiperimeter occurs as part of a formula, it is typically denoted by the letter s.
In Euclidean geometry, Ptolemy's theorem is a relation between the four sides and two diagonals of a cyclic quadrilateral. The theorem is named after the Greek astronomer and mathematician Ptolemy. Ptolemy used the theorem as an aid to creating his table of chords, a trigonometric table that he applied to astronomy.
In geometry, the circumscribed circle or circumcircle of a triangle is a circle that passes through all three vertices. The center of this circle is called the circumcenter of the triangle, and its radius is called the circumradius. The circumcenter is the point of intersection between the three perpendicular bisectors of the triangle's sides, and is a triangle center.
In Euclidean geometry, a tangential quadrilateral or circumscribed quadrilateral is a convex quadrilateral whose sides all can be tangent to a single circle within the quadrilateral. This circle is called the incircle of the quadrilateral or its inscribed circle, its center is the incenter and its radius is called the inradius. Since these quadrilaterals can be drawn surrounding or circumscribing their incircles, they have also been called circumscribable quadrilaterals, circumscribing quadrilaterals, and circumscriptible quadrilaterals. Tangential quadrilaterals are a special case of tangential polygons.
In geometry, a bicentric polygon is a tangential polygon which is also cyclic — that is, inscribed in an outer circle that passes through each vertex of the polygon. All triangles and all regular polygons are bicentric. On the other hand, a rectangle with unequal sides is not bicentric, because no circle can be tangent to all four sides.
In Euclidean geometry, an ex-tangential quadrilateral is a convex quadrilateral where the extensions of all four sides are tangent to a circle outside the quadrilateral. It has also been called an exscriptible quadrilateral. The circle is called its excircle, its radius the exradius and its center the excenter. The excenter lies at the intersection of six angle bisectors. These are the internal angle bisectors at two opposite vertex angles, the external angle bisectors at the other two vertex angles, and the external angle bisectors at the angles formed where the extensions of opposite sides intersect. The ex-tangential quadrilateral is closely related to the tangential quadrilateral.
In Euclidean geometry, a tangential trapezoid, also called a circumscribed trapezoid, is a trapezoid whose four sides are all tangent to a circle within the trapezoid: the incircle or inscribed circle. It is the special case of a tangential quadrilateral in which at least one pair of opposite sides are parallel. As for other trapezoids, the parallel sides are called the bases and the other two sides the legs. The legs can be equal, but they don't have to be.
In geometry, the isoperimetric point is a triangle center — a special point associated with a plane triangle. The term was originally introduced by G.R. Veldkamp in a paper published in the American Mathematical Monthly in 1985 to denote a point P in the plane of a triangle △ABC having the property that the triangles △PBC, △PCA, △PAB have isoperimeters, that is, having the property that
In Euclidean geometry, a right kite is a kite that can be inscribed in a circle. That is, it is a kite with a circumcircle. Thus the right kite is a convex quadrilateral and has two opposite right angles. If there are exactly two right angles, each must be between sides of different lengths. All right kites are bicentric quadrilaterals, since all kites have an incircle. One of the diagonals divides the right kite into two right triangles and is also a diameter of the circumcircle.
An acute triangle is a triangle with three acute angles. An obtuse triangle is a triangle with one obtuse angle and two acute angles. Since a triangle's angles must sum to 180° in Euclidean geometry, no Euclidean triangle can have more than one obtuse angle. Acute and obtuse triangles are the two different types of oblique triangles — triangles that are not right triangles because they do not have a 90° angle.
In plane geometry, a mixtilinear incircle of a triangle is a circle which is tangent to two of its sides and internally tangent to its circumcircle. The mixtilinear incircle of a triangle tangent to the two sides containing vertex is called the -mixtilinear incircle. Every triangle has three unique mixtilinear incircles, one corresponding to each vertex.