Couta

Last updated
Couta boat, Kathleen Mary sailing on Pittwater, February 29th 2020 Kathleen Mary C90 Pittwater.jpg
Couta boat, Kathleen Mary sailing on Pittwater, February 29th 2020

A couta boat is a type of sailing vessel originally designed and built in Victoria, Australia, around the fishing ports of Sorrento and Queenscliff, and along Victoria's west coast as far west as Portland. Mostly used from around 1870 until the 1930s, the couta boat survived as a commercial fishing vessel until the 1950s. From the 1970s onwards, a community of enthusiasts started restoring old couta boats to use recreationally.

Contents

History

As a fishing vessel

The couta boat was developed for the coastal fishing industry during the later part of the 19th century. It was particularly used to catch the fish Thyrsites atun , locally called the "barracouta", a confusion with the larger ocean barracuda. The boats headed out to the fishing grounds before dawn, most often through the infamous and often treacherous Rip, the entrance to Port Phillip, where the boats’ qualities of seaworthiness were proven.

Although load-carrying capacity was important, the need for speed under sail was also a desired characteristic. Fishing cooperatives established quotas to control prices, which led to the added requirement of speed in a good boat. Once their quota of "barracouta" was met, the fishermen sailed back to port as fast as they could — the first boat back got the best prices.

The typical couta boat carried a gaff sail and jib, set out on a long bowsprit, although the mainsail developed into more of a gunter sail, because it had a very high-peaked gaff or yard. A rig peculiar to the couta boat evolved, which allowed for sail to be carried much higher than previously, and included a distinctive downward-curved bowsprit.

As efficient and competitive commercial fishing vessels, couta boats reached their peak in the 1920s and 1930s. After World War II, the development of boat engines, and the growing preference for shark, began lessen the importance of couta boats.

As a recreational sailing boat

The couta boat became a victim of the modernisation of the fishing industry after World War II, and survives due only to the efforts of a small group of individuals with a sense of history and an admiration for maritime tradition. Regretting the apparent inevitability that the distinctive boats would become a footnote in Australia’s seafaring history, from the late 1970s onwards, a few dedicated people sought and restored remaining couta boats that were either still afloat or propped up in backyards along the coast.

Couta boats are highly sought after and keenly compete in races. Many are built new because the supply of originals has been exhausted. There is a couta boat club in Sorrento and another in Queenscliff.

Early Example

Thistle, one of the oldest surviving examples of a couta boat, was designed and built in Victoria by J.R. Jones, in about 1903. She was purchased in 1987 and restored by Tim Phillips for the Australian National Maritime Museum, and went on display in 1990. [1]

Related Research Articles

<span class="mw-page-title-main">Schooner</span> Sailing vessel

A schooner is a type of sailing vessel defined by its rig: fore-and-aft rigged on all of two or more masts and, in the case of a two-masted schooner, the foremast generally being shorter than the mainmast. A common variant, the topsail schooner also has a square topsail on the foremast, to which may be added a topgallant. Differing definitions leave uncertain whether the addition of a fore course would make such a vessel a brigantine. Many schooners are gaff-rigged, but other examples include Bermuda rig and the staysail schooner.

<span class="mw-page-title-main">Bermuda sloop</span> 17th century sailing vessel

The Bermuda sloop is a historical type of fore-and-aft rigged single-masted sailing vessel developed on the islands of Bermuda in the 17th century. Such vessels originally had gaff rigs with quadrilateral sails, but evolved to use the Bermuda rig with triangular sails. Although the Bermuda sloop is often described as a development of the narrower-beamed Jamaica sloop, which dates from the 1670s, the high, raked masts and triangular sails of the Bermuda rig are rooted in a tradition of Bermudian boat design dating from the earliest decades of the 17th century. It is distinguished from other vessels with the triangular Bermuda rig, which may have multiple masts or may not have evolved in hull form from the traditional designs.

<span class="mw-page-title-main">Port Phillip</span> Bay in Victoria, Australia

Port Phillip or Port Phillip Bay is a horsehead-shaped enclosed bay on the central coast of southern Victoria, Australia. The bay opens into the Bass Strait via a short, narrow channel known as The Rip, and is completely surrounded by localities of Victoria's two largest cities — metropolitan Greater Melbourne in the bay's main eastern portion north of the Mornington Peninsula, and the city of Greater Geelong in the much smaller western portion north of the Bellarine Peninsula. Geographically, the bay covers 1,930 km2 (750 sq mi) and the shore stretches roughly 264 km (164 mi), with the volume of water around 25 km3 (6.0 cu mi). Most of the bay is navigable, although it is extremely shallow for its size — the deepest portion is only 24 m (79 ft) and half the bay is shallower than 8 m (26 ft). Its waters and coast are home to seals, whales, dolphins, corals and many kinds of seabirds and migratory waders.

<span class="mw-page-title-main">Searoad Ferries</span> Ferry company of Australia

Searoad Ferries is an Australian company that operates a roll-on/roll-off vehicle and passenger ferry service between the heads of Port Phillip, near Melbourne, Victoria, Australia.

<span class="mw-page-title-main">Queenscliff, Victoria</span> Town in Victoria, Australia

Queenscliff is a small town on the Bellarine Peninsula in southern Victoria, Australia, south of Swan Bay at the entrance to Port Phillip. It is the administrative centre for the Borough of Queenscliffe. At the 2016 census, Queenscliff had a population of 1,315.

<span class="mw-page-title-main">Cutter (boat)</span> Type of boat

A cutter is a name for various types of watercraft. It can apply to the rig of a sailing vessel, to a governmental enforcement agency vessel, to a type of ship's boat which can be used under sail or oars, or, historically, to a type of fast-sailing vessel introduced in the 18th century, some of which were used as small warships.

<span class="mw-page-title-main">The Rip</span> Waterway entrance in Victoria, Australia

"The Rip", also known as "The Heads", is the narrow waterway entrance connecting the Bass Strait to the bay of Port Phillip in southern Victoria, Australia, and is the only route of maritime transport into Port Phillip and thus seaport access into Melbourne and Geelong, Victoria's two largest cities. Because of large tidal flows through the relatively narrow channel from the bay to the ocean, and a high rocky seabed, The Rip is a dangerous stretch of water and has claimed numerous ships and many lives. Geographically, it is the roughly triangular area of water between the land points of Point Nepean on the Mornington Peninsula, Shortlands Bluff and Point Lonsdale on the Bellarine Peninsula, with these three forming The Heads.

<span class="mw-page-title-main">Pilot boat</span> Type of boat

A pilot boat is a type of boat used to transport maritime pilots between land and the inbound or outbound ships that they are piloting. Pilot boats were once sailing boats that had to be fast because the first pilot to reach the incoming ship got the business. Today, pilot boats are scheduled by telephoning the ship agents/representatives prior to arrival.

<span class="mw-page-title-main">Friendship Sloop</span> [[Gaff rig|Gaff-rigged]] sailboat

The Friendship sloop, also known as a Muscongus Bay sloop or lobster sloop, is a gaff-rigged working boat design that originated in Friendship, Maine around 1880 and has survived as a traditional-style sailboat.

<span class="mw-page-title-main">Smack (ship)</span> Sailing ship type

A smack was a traditional fishing boat used off the coast of Britain and the Atlantic coast of America for most of the 19th century and, in small numbers, up to the Second World War. Many larger smacks were originally cutter-rigged sailing boats until about 1865, when smacks had become so large that cutter main booms were unhandy. The smaller smacks retained the gaff cutter rig. The larger smacks were lengthened and re-rigged and new ketch-rigged smacks were built, but boats varied from port to port. Some boats had a topsail on the mizzen mast, while others had a bowsprit carrying a jib.

<span class="mw-page-title-main">Fifie</span> Sailing boat

The Fifie is a design of sailing boat developed on the east coast of Scotland. It was a traditional fishing boat used by Scottish fishermen from the 1850s until well into the 20th century. These boats were mainly used to fish for herring using drift nets, and along with other designs of boat were known as herring drifters.

<span class="mw-page-title-main">Fort Queenscliff</span> Historic commonwealth heritage site in Queenscliff VIC

Fort Queenscliff, in Victoria, Australia, dates from 1860 when an open battery was constructed on Shortland's Bluff to defend the entrance to Port Phillip. The Fort, which underwent major redevelopment in the late 1870s and 1880s, became the headquarters for an extensive chain of forts around Port Phillip Heads. Its garrison included volunteer artillery, engineers, infantry and naval militia, and it was manned as a coastal defence installation continuously from 1883 to 1946. The other fortifications and armaments around the Heads were completed by 1891, and together made Port Phillip one of the most heavily defended harbours in the British Empire.

<span class="mw-page-title-main">Bugeye</span> Chesapeake Bay sailboat type for oyster dredging

The bugeye is a type of sailboat developed in the Chesapeake Bay for oyster dredging. The predecessor of the skipjack, it was superseded by the latter as oyster harvests dropped.

<i>Adventure</i> (1926 schooner) 1926 schooner

Adventure is a gaff rigged knockabout schooner. She was built in Essex, Massachusetts, USA, and launched in 1926 to work the Grand Banks fishing grounds out of Gloucester. She is one of only two surviving knockabout fishing schooners – ships designed without bowsprits for the safety of her crew.

<span class="mw-page-title-main">Pinisi</span> Type of rigging of Indonesian sailing vessels

Literally, the word pinisi refers to a type of rigging of Indonesian sailing vessels. A pinisi carries seven to eight sails on two masts, arranged like a gaff-ketch with what is called 'standing gaffs' — i.e., unlike most Western ships using such a rig, the two main sails are not opened by raising the spars they are attached to, but the sails are 'pulled out' like curtains along the gaffs which are fixed at around the centre of the masts.

<span class="mw-page-title-main">Tongkang</span> Type of small boat in Southeast Asia

Tongkang or "Tong'kang" refers to several type of boats used to carry goods along rivers and shoreline in Maritime Southeast Asia. One of the earliest record of tongkang has a background of 14th century, being mentioned in Malay Annals which was composed no earlier than 17th century. One passage mentioned it as being used by Majapahit empire during the 1350 attack on Singapura.

HMVS Lonsdale was a second-class torpedo boat constructed for the Victorian Naval Forces and later operated by the Commonwealth Naval Forces and the Royal Australian Navy. She was sunk on mud flats on Swan Island in Port Phillip Bay in 1912 after being stripped of equipment and machinery. Having been commissioned in 1884, and then officially joining the Commonwealth Naval forces in 1901, the boat was the oldest ship in the Royal Navy, and is the oldest Royal Australian Navy ship still in existence.

<i>Pinas</i> (ship)

The pinas, sometimes called "pinis" as well, is a type of schooner of the east coast of the Malay peninsula, built in the Terengganu area. This kind of vessel was built of Chengal wood by the Malays since the 19th century and roamed the South China Sea and adjacent oceans as one of the two types of traditional sailing vessels the late Malay maritime culture has developed: The bedar and the pinas.

<span class="mw-page-title-main">Port Phillip Ferries</span> Ferry operator in Melbourne, Australia

Port Phillip Ferries is an Australian ferry company that operates on Port Phillip, providing fast ferry services connecting Geelong and Portarlington to Melbourne Docklands.

The Aquarius 24 Pilot Cutter, also called the Aquarius Pilot Cutter 24, Aquarius 24 Cutter and the Topsail Pilot Cutter, is an American trailerable sailboat that was designed by Frank Parish as a cruiser and first built in 1979.

References

  1. "Thistle". Australian Rigister of Historic Vessels. Australia National Maritime Museum. Archived from the original on 2018-04-11. Retrieved 2024-03-11.