GSL-class berthing pontoon

Last updated

The GSL class of jetty berthing pontoons are a series of four non self-propelled yardcraft built by Goa Shipyard Limited for the Indian Navy.

Contents

The pontoons are catamarans with rectangular shaped twin flat-bottomed hulls. The twin hulls are connected by trusses of round pipes with a steel deck covering the transverse beams. Each hull is divided into eight watertight compartments. The pontoons have hydro-pneumatic fenders on both sides to facilitate high energy absorption and low reaction loads. Two vertical roller fenders are located at the forward and aft corners, on the side, for corner protection. They are intended for berthing vessels having displacement up to 40,000 tons on a jetty by serving as spacers between the jetty and the ship. [1]

They were built as part of an order to also construct one Service Barge Pontoon and four gangways. The request for proposal was issued on 7 March 2011 and the contract was signed in June 2011. By February 2013 all four pontoons had been delivered. Two pontoons were stationed at Naval Dockyard, Mumbai and two at the Naval Base in Karwar. [2]

External image
GSL class pontoon
Searchtool.svg GSL Pontoon For INS Vikramaditya

Dimension

Operating Performance

See also

GSL service barge pontoon

Related Research Articles

A floating dock, floating pier or floating jetty is a platform or ramp supported by pontoons. It is usually joined to the shore with a gangway. The pier is usually held in place by vertical poles referred to as pilings, which are embedded in the seafloor or by anchored cables. Frequently used in marinas, this type of pier maintains a fixed vertical relationship to watercraft secured to it, independent of tidal, river or lake elevation. The angle of the gangway varies with the water level.

<span class="mw-page-title-main">Lighter aboard ship</span>

The lighter aboard ship (LASH) system refers to the practice of loading barges (lighters) aboard a bigger vessel for transport. It was developed in response to a need to transport lighters, a type of unpowered barge, between inland waterways separated by open seas. Lighters are typically towed or pushed around harbors, canals or rivers and cannot be relocated under their own power. The carrier ships are known variously as LASH carriers, barge carriers, kangaroo ships or lighter transport ships.

USS <i>Saginaw</i> (LST-1188) Newport-class tank landing ship

USS Saginaw (LST-1188) was the tenth of the Newport-class tank landing ships of the United States Navy which replaced the traditional bow door-design tank landing ships (LSTs). The second ship of that name, Saginaw was named after the river in Michigan. The LST was constructed by National Steel and Shipbuilding Company of San Diego, California, launched in 1970 and commissioned in 1971. During service with the United States Navy, the ship took part in US efforts in the Lebanese civil war and the Gulf War. Saginaw was decommissioned on 28 June 1994 and was transferred to the Royal Australian Navy on 28 August that year.

USS <i>Newport</i> (LST-1179) Newport-class tank landing ship

USS Newport (LST-1179) was the third ship of the United States Navy (USN) to bear the name of the Rhode Island city. The first of her class of landing ship tanks (LST), she was capable of a sustained speed of 20 knots. Her ability to adjust her draft, accompanied by her unique bow-ramp design, helped bring a new degree of responsiveness to the amphibious fleet. The ship was launched in 1968 and entered service with the USN in 1969. Assigned to the United States Atlantic Fleet for the entirety of her career, Newport made deployments to the Mediterranean and Caribbean Seas. The vessel was taken out of service in 1992 and laid up until 2001.

USS <i>Sumter</i> (LST-1181) Newport-class tank landing ship

USS Sumter (LST-1181) was the third of twenty Newport-class tank landing ships in service with the United States Navy, which replaced the traditional bow door-design tank landing ships (LSTs). Sumter was constructed by Philadelphia Naval Shipyard in Philadelphia, Pennsylvania and was launched in 1969. The ship entered service in 1970, was assigned to the Pacific coast of the United States and deployed to the western Pacific twice during the Vietnam War. In 1973, Sumter was reassigned to the Atlantic coast and took part in operations in along the Eastern Seaboard of the United States, the Mediterranean Sea and the Caribbean Sea. The LST was decommissioned in 1993.

<i>Sovetsky Soyuz</i>-class battleship Planned class of Soviet battleships

The Sovetsky Soyuz-class battleships, also known as "Stalin's Republics", were a class of battleships begun by the Soviet Union in the late 1930s but never brought into service. They were designed in response to the Bismarck-class battleships being built by Germany. Only four hulls of the fifteen originally planned had been laid down by 1940, when the decision was made to cut the program to only three ships to divert resources to an expanded army rearmament program.

The Kronshtadt-class battlecruisers, with the Soviet designation as Project 69 heavy cruisers,, were ordered for the Soviet Navy in the late 1930s. Two ships were started but none were completed due to World War II. These ships had a complex and prolonged design process which was hampered by constantly changing requirements and the Great Purge in 1937.

USS <i>Peoria</i> (LST-1183) Newport-class tank landing ship

USS Peoria (LST-1183) was a Newport-class tank landing ship which replaced the traditional bow door-design tank landing ships (LSTs). The vessel took part in the Vietnam War and Gulf War. The ship was constructed by the National Steel and Shipbuilding Company in San Diego, California and was launched in 1968 and commissioned in 1970. Named for a city in Illinois, Peoria was assigned to the United States Pacific Fleet and home ported at San Diego. The tank landing ship alternated between military exercises along the United States west coast and deployments to the western Pacific. Peoria took part in the evacuations of Phnom Penh, Cambodia and Saigon, South Vietnam, both of which signaled the end of American involvement in the respective countries. The vessel was decommissioned 1994 and sunk as a target ship during a RIMPAC naval exercise in 2004.

<span class="mw-page-title-main">Fender (boating)</span> Element protecting the hull of a ship

In boating, a fender is an air-filled ball or a device in other shape and material used to absorb the kinetic energy of a boat or vessel berthing against a jetty, quay wall or other vessel. Fenders, used on all types of vessels, from cargo ships to cruise ships, ferries and personal yachts, prevent damage to vessels and berthing structures. To do this, fenders have high energy absorption and low reaction force. Fenders are typically manufactured out of rubber, foam elastomer or plastic. Rubber fenders are either extruded or made in a mold. The type of fender that is most suitable for an application depends on many variables, including dimensions and displacement of the vessel, maximum allowable stand-off, berthing structure, tidal variations and other berth-specific conditions. The size of the fender unit is based on the berthing energy of the vessel which is related to the square of the berthing velocity.

USS <i>Barbour County</i> Newport-class tank landing ship

USS Barbour County (LST-1195) was the seventeenth ship of the twenty Newport-class tank landing ships of the United States Navy (USN) which replaced the traditional bow door-design tank landing ships (LSTs). The vessel was named after two counties; one in Alabama, and the other in West Virginia. The LST was constructed by National Steel and Shipbuilding Company of San Diego, California. Barbour County was launched in 1971 and commissioned into the USN in 1972. Barbour County took part in the Vietnam War, including the evacuation of Saigon and the Gulf War. The LST also performed disaster relief in Bangladesh. The vessel was decommissioned in 1992 and laid up with plans to sell the ship. This did not happen and the vessel was struck from the Naval Vessel Register in 2001 and sunk as a target ship in 2004.

USS <i>Boulder</i> Newport-class tank landing ship

USS Boulder (LST-1190) was the twelfth of twenty Newport-class tank landing ships of the United States Navy (USN) which replaced the traditional bow door-design tank landing ships (LSTs). Named after the county in Colorado, the ship was constructed by National Steel and Shipbuilding Company of San Diego, California. The LST was launched in 1970 and was commissioned in 1971. Boulder was assigned to the United States Atlantic Fleet and deployed in the Caribbean and Mediterranean Seas. In 1980, the ship was transferred to the Naval Reserve Force. In 1988, Boulder ran aground off Norway during a military exercise. The vessel was decommissioned in 1994 and laid up at the Naval Inactive Ship Maintenance Facility in Philadelphia, Pennsylvania. The ship was struck from the Naval Vessel Register in 2008 and towed to Brownsville, Texas for scrapping in 2022.

USS <i>Racine</i> (LST-1191) Newport-class tank landing ship

USS Racine (LST-1191) was the thirteenth of twenty Newport-class tank landing ships of the United States Navy (USN) which replaced the traditional bow door-design tank landing ships (LSTs). The second ship named after the city in Wisconsin, the ship was constructed by National Steel and Shipbuilding Company of San Diego, California. The LST was launched in 1970 and was commissioned in 1971. Racine was assigned to the United States west coast and deployed to the western Pacific Ocean during the Vietnam War. The ship was transferred to the Naval Reserve Force in 1981. The LST was decommissioned in 1993 and placed in reserve. Racine was struck from the Naval Vessel Register in 2008 and after an attempted sale to Peru failed, was discarded as a target ship during a sinking exercise in July 2018.

USS <i>Manitowoc</i> (LST-1180) Newport-class tank landing ship

USS Manitowoc (LST-1180) was the second ship of the Newport-class tank landing ships which replaced the traditional bow door-design tank landing ships (LSTs) in service with the United States Navy. Manitowoc was constructed by the Philadelphia Naval Shipyard in Philadelphia, Pennsylvania and launched in 1969 and entered service in 1970.

USS <i>Fairfax County</i> Tank landing ship of the United States Navy

USS Fairfax County (LST-1193) was the fifteenth of twenty Newport-class tank landing ships of the United States Navy (USN) which replaced the traditional bow door-design tank landing ships (LSTs). Named after a county in Virginia, the ship was constructed by National Steel and Shipbuilding Company of San Diego, California. The LST was launched in 1970 and was commissioned into the USN in 1971. Fairfax County was alternated deployments between the Caribbean Sea and the Mediterranean Sea. During the Gulf War, Fairfax County was deployed off the northern African coast as part of a deterrent force. The ship was decommissioned from the USN in 1994.

French destroyer <i>Mogador</i> Mogador-class destroyer

Mogador was the lead ship of the French Navy's Mogador class of destroyers. Named after the Moroccan town, she was built before the outbreak of World War II. The ship was heavily damaged during the British attack on Mers-el-Kébir on 3 July 1940, but was later repaired and sailed to Toulon. She was scuttled in Toulon Harbor when the Germans tried to seize her, along with the rest of the fleet, on 27 November 1942.

GSL/GRSE series of Interceptor Boats are Indian high speed patrol boats assembled by Garden Reach Shipbuilders & Engineers Limited (GRSE), Kolkata and Goa Shipyard Limited (GSL), Goa.

A GSL service barge pontoon is a non self-propelled yardcraft built by Goa Shipyard Limited for the Indian Navy.

<span class="mw-page-title-main">North Killingholme Haven</span>

North Killingholme Haven is a water outlet on the south bank of the Humber Estuary in the civil parish of North Killingholme, to the north-west of the Port of Immingham.

<span class="mw-page-title-main">Type B ship</span>

The Type B ship is a United States Maritime Administration (MARAD) designation for World War II barges. Barges are very low cost to build, operate and move. Barges were needed to move large bulky cargo. A tug boat, some classed as Type V ships, could move a barge, then depart and move on to the next task. That meant the barge did not have to be rushed to be unloaded or loaded. Toward the end of World War 2, some ships that had not been completed in time for the war were converted to barges. US Navy barges are given the prefix: YWN or YW. Due to shortage of steel during World War II, concrete ship constructors were given contracts to build concrete barges, with ferrocement and given the prefix YO, YOG, YOGN. Built in 1944 and 1945, some were named after elements.

<span class="mw-page-title-main">Wooden boats of World War II</span> United States wooden boats used in World War II

Splinter fleet or Splinter navy was a nickname given to the United States wooden boats used in World War II. The boats served in many different roles during the war. These boats were built in small boatyards on the West coast and East coast, Great Lakes and the Gulf of Mexico. They could be built quickly, in just 60 to 120 days. Most of the boats were built by boatyards that already had the tools and knowledge from building yachts, sailboats and motor boats. Many were built by craftsmen in family-owned small businesses. Under the Emergency Shipbuilding Program and War Shipping Administration contracts went out to over fifty boatyards across the country. The boats were built for the US Navy, the United States Army Air Forces, United States Coast Guard, and US Army. Some of the wooden boats went to Allied nations on the Lend-Lease program.

References

  1. "Tender Pontoons Gangways" (PDF). Archived from the original (PDF) on 10 June 2015. Retrieved 26 February 2013.
  2. "News & Events Details". Goa Shipyard. Retrieved 7 May 2013.