List of fire-retardant materials

Last updated

Fire-retardant materials are designed to burn slowly.

Contents

Fire-retardant materials should not be confused with fire-resistant materials. A fire resistant material is one which is designed to resist burning and withstand heat. An example of a fire-resistant material is one which is used in bunker gear worn by firefighters to protect them from the flames of a burning building.

In the United Kingdom, after two significant construction fires which resulted in a combined loss of £1,500 million, The Joint Code of Practice was introduced by the Fire Protection Association (FPA), the UK's national fire safety organisation, [1] to prevent fires on buildings undergoing construction work. The Joint Code of Practice provides advice on how to prevent fires such as through the use of flame-retardant temporary protection materials: for example, some high quality floor protectors are designed to burn slowly and prevent the spread of fires.

Fire-retardant materials used in buildings

Fire textiles

Phasing-out

Many common brominated flame retardants are being phased-out by manufacturers. [2] Asbestos is another fireproofing material that has been largely phased out, due to its health risks, including asbestosis and mesothelioma.

See also

Related Research Articles

<span class="mw-page-title-main">Vermiculite</span> Hydrous phyllosilicate mineral which expands significantly when heated

Vermiculite is a hydrous phyllosilicate mineral which undergoes significant expansion when heated. Exfoliation occurs when the mineral is heated sufficiently; commercial furnaces can routinely produce this effect. Vermiculite forms by the weathering or hydrothermal alteration of biotite or phlogopite. Large commercial vermiculite mines exist in the United States, Russia, South Africa, China, and Brazil.

<span class="mw-page-title-main">Plaster</span> Broad range of building and sculpture materials

Plaster is a building material used for the protective or decorative coating of walls and ceilings and for moulding and casting decorative elements. In English, "plaster" usually means a material used for the interiors of buildings, while "render" commonly refers to external applications. The term stucco refers to plasterwork that is worked in some way to produce relief decoration, rather than flat surfaces.

<span class="mw-page-title-main">Calcium silicate</span> Chemical compound naturally occurring as the mineral larnite

Calcium silicate can refer to several silicates of calcium including:

<span class="mw-page-title-main">Flame retardant</span> Substance applied to items to slow burning or delay ignition

The term flame retardant subsumes a diverse group of chemicals that are added to manufactured materials, such as plastics and textiles, and surface finishes and coatings. Flame retardants are activated by the presence of an ignition source and prevent or slow the further development of flames by a variety of different physical and chemical mechanisms. They may be added as a copolymer during the polymerisation process, or later added to the polymer at a moulding or extrusion process or applied as a topical finish. Mineral flame retardants are typically additive, while organohalogen and organophosphorus compounds can be either reactive or additive.

A flash fire is a sudden, intense fire caused by ignition of a mixture of air and a dispersed flammable substance such as a solid, flammable or combustible liquid, or a flammable gas. It is characterized by high temperature, short duration, and a rapidly moving flame front.

<span class="mw-page-title-main">Fire blanket</span> Sheet of fire retardant material used to smother fires

A fire blanket is a safety device designed to extinguish incipient (starting) fires. It consists of a sheet of a fire retardant material that is placed over a fire in order to smother it.

<span class="mw-page-title-main">Fire retardant</span> Substance reducing flammability

A fire retardant is a substance that is used to slow down or stop the spread of fire or reduce its intensity. This is commonly accomplished by chemical reactions that reduce the flammability of fuels or delay their combustion. Fire retardants may also cool the fuel through physical action or endothermic chemical reactions. Fire retardants are available as powder, to be mixed with water, as fire-fighting foams and fire-retardant gels. Fire retardants are also available as coatings or sprays to be applied to an object.

<span class="mw-page-title-main">Candle wick</span> The piece of string in a candle which burns when lit

A candle wick or lamp wick is usually made of braided cotton that holds the flame of a candle or oil lamp. A candle wick works by capillary action, conveying ("wicking") the fuel to the flame. When the liquid fuel, typically melted candle wax, reaches the flame it then vaporizes and combusts. In other words, the wick brings the liquified wax up into the flame to burn. The candle wick influences how the candle burns. Important characteristics of the wick include diameter, stiffness, fire-resistance, and tethering.

<span class="mw-page-title-main">Fireproofing</span> Rendering something (structures, materials, etc.) resistant to fire, or incombustible

Fireproofing is rendering something resistant to fire, or incombustible; or material for use in making anything fire-proof. It is a passive fire protection measure. "Fireproof" or "fireproofing" can be used as a noun, verb or adjective; it may be hyphenated ("fire-proof").

<span class="mw-page-title-main">Intumescent</span> Substance that swells as a result of heat exposure

An intumescent is a substance that swells as a result of heat exposure, leading to an increase in volume and decrease in density. Intumescence refers to the process of swelling. Intumescent materials are typically used in passive fire protection and require listing, approval, and compliance in their installed configurations in order to comply with the national building codes and laws.

<span class="mw-page-title-main">Passive fire protection</span> Component or system to passively prevent the spread of fire

Passive fire protection (PFP) is components or systems of a building or structure that slows or impedes the spread of the effects of fire or smoke without system activation, and usually without movement. Examples of passive systems include floor-ceilings and roofs, fire doors, windows, and wall assemblies, fire-resistant coatings, and other fire and smoke control assemblies. Passive fire protection systems can include active components such as fire dampers.

<span class="mw-page-title-main">Fire-retardant fabric</span> Flame retardant fabric

Fire-retardant fabrics are textiles that are more resistant to fire than others through chemical treatment of flame-retardant or manufactured fireproof fibers.

Fire resistance may refer to:

<span class="mw-page-title-main">Building insulation material</span> Insulation material

Building insulation materials are the building materials that form the thermal envelope of a building or otherwise reduce heat transfer.

<span class="mw-page-title-main">Combustibility and flammability</span> Ability to easily ignite in air at ambient temperatures

A combustible material is a material that can burn in air under certain conditions. A material is flammable if it ignites easily at ambient temperatures. In other words, a combustible material ignites with some effort and a flammable material catches fire immediately on exposure to flame.

<span class="mw-page-title-main">Fire retardant gel</span>

Fire-retardant gels are superabsorbent polymer slurries with a "consistency almost like petroleum jelly." Fire-retardant gels can also be slurries that are composed of a combination of water, starch, and clay. Used as fire retardants, they can be used for structure protection and in direct-attack applications against wildfires.

Flame spread, or surface burning characteristics rating, is a ranking derived by laboratory standard test methodology of a material's propensity to burn rapidly and spread flames. There are several standardized methods of determining flame spread,

Fire-safe polymers are polymers that are resistant to degradation at high temperatures. There is need for fire-resistant polymers in the construction of small, enclosed spaces such as skyscrapers, boats, and airplane cabins. In these tight spaces, ability to escape in the event of a fire is compromised, increasing fire risk. In fact, some studies report that about 20% of victims of airplane crashes are killed not by the crash itself but by ensuing fires. Fire-safe polymers also find application as adhesives in aerospace materials, insulation for electronics, and in military materials such as canvas tenting.

Organosilicon water repellent:

<span class="mw-page-title-main">Racing suit</span> Clothing worn in auto racing

A racing suit or racing overalls, often referred to as a fire suit due to its fire retardant properties, is clothing such as overalls worn in various forms of auto racing by racing drivers, crew members who work on the vehicles during races, track safety workers or marshals, and in some series commentators at the event.

References

  1. "The Joint Code of Practice". FPA. Fire Protection Association. Retrieved 28 November 2014.
  2. Moran, N., Phasing out fire retardants, Royal Society of Chemistry, published 25 July 2013, accessed 13 August 2020