List of mills in Shaw and Crompton

Last updated

Following a building boom during the 1860s-1870s, Crompton became a major mill town, dominated by large rectangular brick-built cotton mills. Crompton millscape.png
Following a building boom during the 1860s–1870s, Crompton became a major mill town, dominated by large rectangular brick-built cotton mills.

This is a list of textile factories that have existed in Shaw and Crompton , formerly of Lancashire and now in Greater Manchester, England.

Contents

From the Industrial Revolution until the 20th century, Crompton (as it was then mainly known) was a major centre of textile manufacture, particularly cotton spinning. During this period, it was dominated by large rectangular brick-built factories, some of which still remain today as warehouses or distribution centres. The town has seen forty-eight separate textile factories built within its boundaries.

A–E

NameArchitectLocationBuiltDemolishedServed
(Years)
Ash Wild & Collins Jubilee Street  53°34′40″N2°05′07″W / 53.5778°N 2.0852°W / 53.5778; -2.0852 ("Ash") 1883 1985 102
Ash Mill - Shaw & Crompton.jpg Notes: Ash Spinning Co. Ltd's was incorporated on 25 January 1883 to build a cotton spinning mill holding about 80,000 mule spindles. 'Ash' mill was one of two mills in Shaw that was built twice. The original attempt blew down in a gale two months before it was completed. Regardless of this the mill was still finished by its deadline at cost of £20,000.

The mill was extended twice in 1886 and 1920 respectively. It ceased production in 1984 and was demolished the following year. Ash's employees were transferred to Grape mill in neighbouring Royton.

After lying empty for 12 years, the site is now occupied by approximately one seventh of Littlewoods' Shaw National Distribution Centre. [1] [2]
Beal UNKNOWN Beal Lane  53°34′38″N2°05′28″W / 53.5771°N 2.0910°W / 53.5771; -2.0910 ("Beal") <1832 c.1875
Mill-image-pending.jpg Notes: In its relatively short life this original Beal mill was operated by many different companies. William Taylor and Robinson & Co with the former still present in 1852 and later William Nutter and Co were documented to run the mill in 1861. Upon its demise in 1875, a company called Marsden and Berry were running the mill.

Spindleage: 1915:96,276 Engine:J. Musgrave & Sons 1400hp

Presently the site is occupied by Shaw Sheet Metal Co. Ltd. [3]
Beal Joseph Stott George Street  53°34′57″N2°05′09″W / 53.5824°N 2.0858°W / 53.5824; -2.0858 ("Beal") 1889 1933 44
Mill-image-pending.jpg Notes: Built and operated by Beal Spinning Co. Ltd until its demolition.

Some facts:

  • 5 storeys, 30bays × 12
  • Spindleage: 1915; 97,928
  • Counts, 50–70 weft, 40–44 twists
  • It was built at a cost of £32,704 with a further cost of £41,349 for machinery and furnishings.
  • It burnt an average of 70 tons of coal each week at a price of 8s a ton.
  • It employed approximately 150 men and 75 women.
  • It consumed 130 'good American quality' bales of cotton each week.
  • There were 10,000 shareholders in the company at the cost of £10 a share.
The 19,070 sq. yard site was occupied for some time by a company called Buckton which constructed roads and buildings until it too was, somewhat ironically, demolished and the land redeveloped for a small housing estate which was completed in the 1990s. [4]
Briar Philip Sydney Stott Beal Lane  53°34′34″N2°05′20″W / 53.5762°N 2.0890°W / 53.5762; -2.0890 ("Briar") 1906 standing 117
Briar Mill, Shaw - geograph.org.uk - 86825.jpg Notes: Built and operated by Briar Mill Ltd. Which became bankrupt and refloated as Briar Mill (1920) Ltd. Sometime in the mid-1950s it was occupied by the Lancashire Cotton Corporation and later Courtaulds Ltd. in 1964. It ceased all cotton production in 1988 when it was converted for warehousing and distribution of catalogue items by a company which was then known as J.D. Williams Ltd. The company also purchased neighbouring Lilac Mill and constructed a bridge to join Briar's second floor to Lilac's first floor. In the early 2000s (decade), operation of the mill transferred to Fulfillment Logistics, a division of J.D. Williams, who continue to use the complex for the same purpose. In the late 1970s, Bolton steeplejack Fred Dibnah was paid £7000 to demolish Briar mill's chimney one brick at a time. His efforts and dare-devil methods are documented in his autobiographic BBC TV series 'The Fred Dibnah Story. [3]
Brook /
Crompton Fold
UNKNOWN Location  53°35′11″N2°04′43″W / 53.5863°N 2.0786°W / 53.5863; -2.0786 ("Brook /
Crompton Fold"
)
c.1790 c.1852
Notes: The mills earliest records show it to have been built and owned by James Milne of Park House and occupied in 1832 by Samuel Lord who upgraded the mill with a 14 hp (10 kW) steam engine. In 1852, Taylor and Greeves were shown as the mill owners but evidently they weren't very prosperous as production ceased soon afterwards. The mill is shown on 1849 Tithe map of the area. In 1908, the land had been given by James Milne to the Church of England who built a sister church to St. James East Crompton on the site and called it St. Saviours Crompton Fold. The Church and its very pleasant setting still remain almost 100 years later. [3]
Cape P.S. Stott Refuge Street  53°34′24″N2°05′38″W / 53.5734°N 2.0938°W / 53.5734; -2.0938 ("Cape") 1900 1993 93
CapeMillReservoir2007.JPG Notes: Cape Mill's chimney which was felled, at the time of its demolition, by steeplejack Fred Dibnah. This event was filmed and featured in his autobiographic TV series 'The Fred Dibnah Story'. The site remained empty for several years after the mills' demolition until the land was used for a brand new housing estate. The mill is survived by its original reservoir which is today used for fishing and its namesake Cape Bowling Club complete with bowling green.The only surviving legacy of Cape mill, its reservoir, which stands adjacent to Duke mill's reservoir and is also used for licensed fishing. [3]
Clough UNKNOWN Mark Lane  53°34′35″N2°05′09″W / 53.5763°N 2.0857°W / 53.5763; -2.0857 ("Clough") 1800 1990 190
Mill-image-pending.jpg Notes: [5]
Clough UNKNOWN Mark Lane  53°34′35″N2°05′03″W / 53.5765°N 2.0843°W / 53.5765; -2.0843 ("Clough") 1835 1934 99
Mill-image-pending.jpg Notes: [5]
Cocker /
Diamond Rope Works
UNKNOWN Cocker Mill Lane  53°34′11″N2°06′32″W / 53.5698322°N 2.1088153°W / 53.5698322; -2.1088153 ("Diamond Rope Works") <1832 1994
Diamond Ropeworks, Royton - geograph.org.uk - 618077.jpg Notes: Diamond Ropeworks, Royton Also known as Cocker Mill and Irk Mill. Built earlier than 1832 originally. Used for fustian cutting by 1891 and taken over in 1897 by Hardman, Ingham & Dawson Ltd for rope and twine making. This ceased following a fire in 1983 and it was taken over in 1975 by Sammy-Woodland Ltd for scarf manufacture. Finally closed 1994 and demolished 1995. The steam engine was saved and is at Bolton. The Shaw/Royton border was altered post demolition so the housing development that replaced it is officially in Royton. [3]
Cowlishaw /
Victoria
UNKNOWN Scowcroft Lane  53°34′21″N2°06′12″W / 53.5725°N 2.1032°W / 53.5725; -2.1032 ("Cowlishaw /
Victoria"
)
<1789 1940
Mill-image-pending.jpg Notes: [3]
Dawn P.S. Stott Eastway SD 940,089 53°34′37″N2°05′31″W / 53.577°N 2.092°W / 53.577; -2.092 ("Dawn Mill, Shaw") 1901 2006 105
Notes: Built on the site of Shaw Mill at the 'dawn' of the 20th century Dawn mill, up until 2005, was home to distribution company DTS Logistics and used for storing and distributing clothing. It was demolished in 2006 to make way for an Asda supermarket. Although its main gates were located on Eastway, the mill semi-occupied the self titled 'Dawn Street' formerly known as 'Newtown' when Shaw Mill was built there. [3]
Dee P.S. Stott Cheetham Street  53°34′43″N2°05′09″W / 53.5785°N 2.0858°W / 53.5785; -2.0858 ("Dee") 1907 1984 77
Dee Mill - Shaw.jpg Notes: The site is now occupied by approximately one seventh of Littlewoods' Shaw National Distribution Centre after the company purchased the land in 1984 and demolished it and neighbouring Ash mill. It technically wasn't completely demolished until 1996, its protected engine house was the only thing stopping further development to the site for over ten years. [6]
Duchess Wild & Collins Location  53°35′09″N2°05′36″W / 53.5859°N 2.0933°W / 53.5859; -2.0933 ("Duchess") 1884 1960 76
Mill-image-pending.jpg Notes: [3]
Duke Joseph Stott Refuge Street  53°34′29″N2°05′34″W / 53.5748°N 2.0928°W / 53.5748; -2.0928 ("Duke") 1883 standing 140
DukeMillShaw2007a.jpg Notes: Post Cotton production, Duke Mill was home to Osram, the multinational lightbulb manufacturer which occupied both Duke and Cape mills for many years. Osram have since moved away from the United Kingdom, however and the mill is now used for mail order processing. Duke Mill is currently the oldest surviving cotton mill in Crompton and arguably the best maintained. [3]
Elm / Newby Joseph Stott Linney Lane (Lyonney Lane) 53°34′52″N2°05′09″W / 53.5810°N 2.0858°W / 53.5810; -2.0858 ("Elm / Newby") 1890 2022 132
PMBNewby.jpg Notes: Opened as Elm mill in 1890 but the name was later changed to Newby.

The mill was part of Littlewoods' Shaw National Distribution Centre who adapted it for warehousing and bulk storage for their catalogue distribution operations. It was linked by a newer building to Lily (No.2) mill and by a bridge to a new building that occupies the site of Rutland mill. Signs of its cotton heritage survived until demolition including its engine house with original crane system.

Although named 'Shaw 3' by the company its official mill name 'Newby' was still affectionately used by workers at the site. 'Elm' is never used and most people, both workers and local residents, would be unaware of this original name. [3]

F–J

NameArchitectLocationBuiltDemolishedServed
(Years)
Fern Joseph Stott Siddall Street  53°34′48″N2°05′35″W / 53.5801°N 2.0930°W / 53.5801; -2.0930 ("Fern") 1884 1983 99
Mill-image-pending.jpg Notes: 1884: 1200hp engine made by Buckley and Taylor of Oldham. It was removed for preservation by Northern Mill Engine Society in 1983. It is shown on their database as being incomplete. [7] 1891: Fern Cotton Spinning Co Ltd, 87,244 spindles, 401/441 twist, 50'/72° weft. [8] [9]
Greenfield UNKNOWN Greenfield Lane  1776 1945 169
Mill-image-pending.jpg Notes:
Hawk A. Turner Store Street,   53°34′53″N2°05′32″W / 53.5815°N 2.0923°W / 53.5815; -2.0923 ("Hawk Mill, Shaw") 1908 1991 83

K–O

NameArchitectLocationBuiltDemolishedServed
(Years)
Laneside UNKNOWN Grains Road  1817 >1875
Mill-image-pending.jpg Notes: [3]
Lilac P.S. Stott Beal Lane  53°34′34″N2°05′20″W / 53.5762°N 2.0890°W / 53.5762; -2.0890 ("Lilac") 1918 standing 105
Lilac Mill Shaw - geograph.org.uk - 779122.jpg Notes: The building of Lilac actually began in 1914. The first attempt was thwarted by gale force winds on 14 September of that year which brought the predominantly iron structure to the ground with a thundering crash that could be heard for miles around. Fortunately no one was working there at the time and so there were no casualties.

The second attempt was completed by 1918 by which time its original purpose for cotton had become a lower priority to World War I and it was initially used as a factory for assembling aircraft components. Finally, it became used for spinning cotton in the following year. The mill was acquired by Fine Spinners and Doublers in 1958. [10] Lilac, along with Park Mill was the last mill in Shaw and Crompton to spin cotton in 1989.

Currently part of JD Williams Co Ltd National Distribution Centre, it has been adapted for offices and warehousing, linking in 2000 on two levels to the company's new highbay automated warehouse. The building is currently run by Fulfillment Logistics as a warehouse for the JD Williams catalogue order operation. It is linked by a bridge to Briar mill. [11]
Lily (No.1) G. Stott Linney Lane  53°34′47″N2°05′18″W / 53.5796°N 2.0883°W / 53.5796; -2.0883 ("Lily (No.1)") 1904 2023 119
No 1 mill, Shaw 2004.jpg Notes: Part of Littlewoods' Shaw National Distribution Centre who adapted and extended the mill for offices and warehousing for their catalogue distribution operations. It was linked on four levels to Lily (No.2) mill by a massive bridge. Workers based here seldom referred to this mill as Lily or Lily 1 instead preferring to use the term 'Shaw 1'. [3]
Lily (No.2) G. Stott Linney Lane  53°34′47″N2°05′11″W / 53.5798°N 2.0865°W / 53.5798; -2.0865 ("Lily (No.2)") 1918 2023 105
No 2 mill, Shaw 2004.jpg Notes: Part of Littlewoods' Shaw National Distribution Centre who adapted the mill for warehousing and bulk storage for their catalogue distribution operations. It was linked on four levels to Lily (No.1) mill by a massive bridge and to Newby (Elm) mill by a newer building. It was also linked on one level by another bridge to the company's sorting centre built on the site of the Dee, Ash and Vale mills. Lily 2's engine house was demolished to make way for the latter bridge. As of 2023 the sorting centre, although slated for demolition, is still in use. Workers based here seldom referred to this mill as Lily or Lily 2 instead preferring to use the term 'Shaw 2'. [3]
Lyon UNKNOWN Location  53°34′31″N2°05′51″W / 53.5753°N 2.0976°W / 53.5753; -2.0976 ("Lyon") <1852 1929
Mill-image-pending.jpg Notes: Burnt down. 1891:James Taylor, 41,224 spindles [3]
Moorfield Joseph Stott Durden Street  53°34′36″N2°05′43″W / 53.5768°N 2.0954°W / 53.5768; -2.0954 ("Moorfield") 1876 1974 98
Mill-image-pending.jpg Notes: [3]
Moss Hey /
Ivor
UNKNOWN Beal Lane   53°34′27″N2°05′26″W / 53.5743°N 2.0905°W / 53.5743; -2.0905 ("Moss Hey /
Ivor"
)
<1789 1972
Mill-image-pending.jpg Notes: Burnt down [3]
New Mill UNKNOWN Rochdale Road  53°34′57″N2°06′44″W / 53.5826°N 2.1123°W / 53.5826; -2.1123 ("New Mill") 1846 1884 38
Mill-image-pending.jpg Notes: [3]
New Mill (rebuilt) UNKNOWN Rochdale Road  53°34′57″N2°06′44″W / 53.5826°N 2.1123°W / 53.5826; -2.1123 ("New Mill (rebuilt)") 1884 1926 42
Mill-image-pending.jpg Notes: Burnt down [3]
Oak /
Tom Taylors
UNKNOWN Moor Street  53°34′24″N2°06′02″W / 53.5732°N 2.1006°W / 53.5732; -2.1006 ("Oak /
Tom Taylors"
)
1863 1937 74
Mill-image-pending.jpg Notes: In 1891 the mill was operated by Thomas Taylor and Son with 60,408 spindles.
A terrace building on Moor Street, which was the original lodge for this mill, remained standing for 75 years after the demise of the mill. After years of neglect, it began to collapse until it was completely demolished in 2012. Known as 'Oak Works', the building has had various planning applications submitted for development but never came to fruition. The latest application to build 10 apartments on the site has been approved. [12] [13]
Old Brox UNKNOWN Rochdale Road  53°34′56″N2°06′35″W / 53.5823°N 2.1097°W / 53.5823; -2.1097 ("Old Brox") 1789 1819 30
Mill-image-pending.jpg Notes: Burnt down [3]
Old Brox (Rebuilt) UNKNOWN Rochdale Road  53°34′56″N2°06′35″W / 53.5823°N 2.1097°W / 53.5823; -2.1097 ("Old Brox (Rebuilt)") 1819 1906 87
Mill-image-pending.jpg Notes: [3]

P–U

NameArchitectLocationBuiltDemolishedServed
(Years)
Park UNKNOWN Milnrow Road  53°35′14″N2°05′13″W / 53.5871°N 2.0869°W / 53.5871; -2.0869 ("Park") 1834 1991 157
Mill-image-pending.jpg Notes: [3]
Rutland F.W. Dixon & Son Linney Lane  53°34′51″N2°05′15″W / 53.5809°N 2.0875°W / 53.5809; -2.0875 ("Rutland Mill, Shaw") 1907 1993 86
Mill-image-pending.jpg Notes: Built and run by Rutland Mill Ltd. until it was absorbed, along with many other Crompton based mill companies, into the Courtaulds Group in 1964. In the late 1980s, as Courtaulds moved operations to other parts of the world, the mill was bought by Littlewoods. Under the Littlewoods name it was run as warehousing for a short time before it was demolished and replaced by a new automated storage warehouse. A section of the North-West wall still remains, complete with painted white brick, and is supporting the incline of the entrance road. [14]
Sandy Lane UNKNOWN Rochdale Road  53°34′45″N2°05′48″W / 53.5793°N 2.0968°W / 53.5793; -2.0968 ("Sandy Lane") >1863 1975
Mill-image-pending.jpg Notes: [3]
Sandy Lane (No.2) UNKNOWN Rochdale Road  53°34′45″N2°05′48″W / 53.5793°N 2.0968°W / 53.5793; -2.0968 ("Sandy Lane (No.2)") >1878 1975
Mill-image-pending.jpg Notes: [15]
Shaw Edge UNKNOWN Location  >1818 <1845
Mill-image-pending.jpg Notes: [3]
Shaw Lane UNKNOWN High Street  >1844 1900
Mill-image-pending.jpg Notes: [3]
Shaw Mill UNKNOWN Newtown SD 940,089 53°34′37″N2°05′31″W / 53.577°N 2.092°W / 53.577; -2.092 ("Shaw Mill") 1820 >1890
Mill-image-pending.jpg Notes: [3]
Shaw Spinning J. Wild Salts Street  53°34′53″N2°05′32″W / 53.5815°N 2.0923°W / 53.5815; -2.0923 ("Shaw Spinning") 1875 1972 97
Mill-image-pending.jpg Notes: [3]
Shaw Side /
Irk
UNKNOWN Oldham Road  53°34′16″N2°05′52″W / 53.5710°N 2.0978°W / 53.5710; -2.0978 ("Shaw Side /
Irk"
)
<1832 >1980
Mill-image-pending.jpg Notes: 1891: Richard Fitton, 74,000 spindles, 118 looms; [3]
Smallbrook J. Wild Nolan Street  53°35′06″N2°05′30″W / 53.5851°N 2.0918°W / 53.5851; -2.0918 ("Smallbrook") 1875 1964 89
Mill-image-pending.jpg Notes:
Springhill UNKNOWN Thornham Road  53°34′52″N2°06′44″W / 53.5812°N 2.1122°W / 53.5812; -2.1122 ("Springhill") 1846 1938 92
Mill-image-pending.jpg Notes: [3]
Trent F.W. Dixon & Son Duchess Street  53°35′09″N2°05′48″W / 53.5858°N 2.0966°W / 53.5858; -2.0966 ("Trent Mill, Shaw") 1908 1967–1969
Mill-image-pending.jpg Notes: [3]

V–Z

NameArchitectLocationBuiltDemolishedServed
(Years)
Vale /
Crompton Spinning Co.
UNKNOWN Beal Lane  53°34′40″N2°05′20″W / 53.5777°N 2.0888°W / 53.5777; -2.0888 ("Vale /
Crompton Spinning Co."
)
1861 1934 73
Mill-image-pending.jpg Notes: 1891: Crompton Spinning Co, Limited, 63,666 spindles, 24'/34° twist, 601/70° weft [3]
Woodend UNKNOWN Milnrow Road  53°35′15″N2°05′21″W / 53.5875°N 2.0891°W / 53.5875; -2.0891 ("Woodend") 1859 1968 109
Mill-image-pending.jpg Notes: Also known as Goats mill, this was built as an extension to Park Mill on the opposite side of Milnrow Road. It traded as A. and A. Crompton and Co. In 1883 a 2000 ihp condensing compound J & E Wood engine was fitted. Production ceased in 1964 [16] [17]
Wye A. Turner & Son Napier Street  53°35′07″N2°05′52″W / 53.5852°N 2.0979°W / 53.5852; -2.0979 ("Wye") 1914 1974 60
Mill-image-pending.jpg Notes: [3]
Wye (No.2) A. Turner & Son Napier Street  53°35′07″N2°05′57″W / 53.5852°N 2.0993°W / 53.5852; -2.0993 ("Wye (No.2)") 1925 1974 49
Mill-image-pending.jpg Notes: Engine: Shaw, Buckley and Taylor 2,500hp cross-compound. Replaced by electric motors in 1965. [3]

Additional images

See also

Related Research Articles

<span class="mw-page-title-main">Regent Mill, Failsworth</span> Cotton mill in Greater Manchester, England

Regent Mill, Failsworth is a Grade II listed former cotton spinning mill in Failsworth, Oldham, Greater Manchester, England. It was built by the Regent Mill Co Ltd. in 1905, and purchased by the Lancashire Cotton Corporation in 1930. It was taken over by the Courtaulds Group in 1964. On ceasing textile production it was occupied by Pifco Ltd, and then by Salton Europe Ltd who now occupy this site. It was driven by an 1800 hp twin tandem compound engine by Buckley & Taylor. It became a ring mill with 60,000 spindles in 1915, all provided by Platt Brothers.

<span class="mw-page-title-main">Trent Mill</span> Cotton mill in Greater Manchester, England

Trent Mill was a cotton spinning mill on Duchess Street in Shaw and Crompton, Greater Manchester, England. It was built by F.W. Dixon & Son in 1908. It closed and was taken over by the Lancashire Cotton Corporation in 1929 reopened in 1938 and closed again in 1962, and was demolished in 1967.

<span class="mw-page-title-main">Rutland Mill</span> Cotton mill in Greater Manchester, England

Rutland Mill was a cotton spinning mill on Linney Lane, in Shaw and Crompton, Greater Manchester, England. It was built by F. W. Dixon & Son in 1907 for the Rutland Mill Co. Ltd. It was taken over by the Lancashire Cotton Corporation in 1935. By 1964, it was in the Courtaulds Group. In the late 1980s, as Courtaulds moved operations to other parts of the world, the mill was bought by Littlewoods who demolished it and replaced it with a new automated storage warehouse.

Magnet Mill, Chadderton is a cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built by the Magnet Mill Ltd. in 1902, but purchased by the Lancashire Cotton Corporation in 1935. It was later taken over by the Courtaulds Group. Ceasing textile production in December 1966, it was demolished soon after. A suburban residential estate now occupies this site. It was driven by a 2200 hp twin tandem compound engine by George Saxon & Co, Openshaw, 1903. It had a 27-foot flywheel with 35 ropes, operating at 64½ rpm.

<span class="mw-page-title-main">Hawk Mill, Shaw</span> Cotton mill in Greater Manchester, England

Hawk Mill, Shaw was a cotton spinning mill in Shaw, Oldham, Greater Manchester. It was built in 1908. It was taken over by the Lancashire Cotton Corporation in the 1931 and passed to Courtaulds in 1964. The mill closed in 1967, and was demolished in 1991.

<span class="mw-page-title-main">Ace Mill, Hollinwood</span>

Ace Mill is a cotton spinning mill in Chadderton in the Metropolitan Borough of Oldham, Greater Manchester. It was built as Gorse No. 2 Mill, in 1914 and cotton was first spun in 1919 by the Ace Mill Ltd, who renamed the mill. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production ended in 1967.

<span class="mw-page-title-main">Blackridings Mill, Oldham</span> Cotton waste mill in Oldham, Greater Manchester, England

Blackridings Mill, Oldham was a cotton waste mill lying off Block Lane in the Werneth area of Oldham, Greater Manchester. It was built before 1861 and ceased spinning between 1875 and 1880. It was then used for flock manufacture and processing cotton waste. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production ended in 1973 and the building was demolished in 1975.

<span class="mw-page-title-main">Dawn Mill, Shaw</span> Cotton mill in Greater Manchester, England

Dawn Mill, Shaw was a cotton spinning mill in Shaw and Crompton, Oldham, Greater Manchester. It was built on the site of Shaw Mill at the "dawn" of the 20th century. Dawn Mill was equipped with mule weft spindles in 1950. It was powered by Engines named Venus and Mars, 1800 hp twin tandem compound engine by George Saxon of Manchester. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. It was sold again and used by distribution company DTS Logistics for storing and distributing clothing. It was demolished in 2006 to make way for an Asda supermarket.

<span class="mw-page-title-main">Royton Ring Mill, Royton</span> Cotton mill in Greater Manchester, England

Royton Ring Mill was a cotton mill in Royton, Greater Manchester, England. It was built in 1908 and extended in 1912. It was taken over by the Lancashire Cotton Corporation in 1935 and passed to Courtaulds in 1964. Production finished in 1966. It was extended again in 1969 and used for other purposes. It has now been demolished, the street has been renamed and houses replace it.

<span class="mw-page-title-main">Kent Mill, Chadderton</span>

Kent Mill, Chadderton was a cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built in 1908 for the Kent Mill Co. It was taken over by the Lancashire Cotton Corporation in 1938 and passed to Courtaulds in 1964. Production finished in 1991 and it was demolished in 1994.

<span class="mw-page-title-main">Manor Mill, Chadderton</span> Cotton mill in Greater Manchester, England

Manor Mill, Chadderton is an early twentieth century, five storey cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built in 1906. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1990.

<span class="mw-page-title-main">Heron Mill, Hollinwood</span> Cotton spinning mill in Oldham, Greater Manchester, England

Heron Mill is a cotton spinning mill in Hollinwood, Oldham, Greater Manchester. It was designed by architect P. S. Stott and was constructed in 1905 by the Heron Mill Company Ltd next to Durban Mill. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production ended in 1960, and it was used by Courtaulds for offices, warehousing, and some experimental fabric manufacture. Courtaulds occupation ended in 1994.

<span class="mw-page-title-main">Newby Mill, Shaw</span> Cotton mill in Greater Manchester, England

Elm Mill, was a four-storey cotton spinning mill in Shaw and Crompton, Greater Manchester, England. It was built in 1890 for the Elm Spinning Company Ltd., and was called Elm Mill until it closed in 1928. It was revived by the Lancashire Cotton Corporation in 1929 and called Newby Mill. LCC and all their assets passed to Courtaulds in 1964. Production at Newby finished in 1970, and it was used for warehousing. Subsequently, named Shaw No 3 Mill, it became part of Littlewood's Shaw National Distribution Centre. It was demolished to make way for housing in 2022.

<span class="mw-page-title-main">Royd Mill, Oldham</span> Cotton mill in Greater Manchester, England

Royd Mill, Oldham was a cotton spinning mill in Hollinwood, Oldham, Greater Manchester, England. It was built in 1907, and extended in 1912 and 1924. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1981. The mill was demolished in 2015 to make way for a "DifRent" housing scheme.

<span class="mw-page-title-main">Orme Mill, Waterhead</span> Cotton mill in Greater Manchester, England

Orme Mill, Waterhead is a cotton spinning mill in Waterhead, Oldham, Greater Manchester, England. It was built in 1908. It was taken over by the Lancashire Cotton Corporation in the 1930s and production finished in 1960. The mill was passed on to Ferranti in 1964, and is now in multiple usage.

<span class="mw-page-title-main">Thorp Mill, Royton</span> Cotton mill in Lancashire, England

Thorp Mill, Royton was built by Ralph Taylor at Thorp Clough in 1764. This is reputed to be the first cotton mill in Lancashire to be powered by water. Ralph Taylor bought three existing cottages which he converted into a mill. This was a carding mill, and was powered by a water wheel driven from Thorp Clough, a tributary of the River Irk. The mill closed in 1788 when the mill and contents were advertised for sale by the then owner James Taylor. It was advertised again in 1792, and the buildings reverted to cottages, and were subsequently demolished. The mill is marked by a blue plaque.

References

  1. Gurr & Hunt 1998, p. 21
  2. National Archive Records on The Ash Group
  3. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Gurr & Hunt 1998, p. 19
  4. Gurr & Hunt
  5. 1 2 Gurr & Hunt 1998, p. 28
  6. "Dee Mill Engine". Northern Mill Engine Society. Retrieved 14 February 2016.
  7. "Northern Mill Engine Society" . Retrieved 14 February 2016.
  8. Gurr & Hunt 1998, p. 32
  9. Hunt & Stott 1988, p. 18
  10. The Times, 7 November 1958, p. 21
  11. Frances Stott (1996). The Changing Face of Crompton, Oldham Education & Leisure. ISBN   0-902809-38-5.
  12. "Planning Pages – Search 'Oak Works'". Oldham Council. Retrieved 21 June 2008.
  13. "Details of Planning Application – PA/055058/08". Oldham Council. Retrieved 21 June 2008.
  14. Hunt & Stott (1988). Looking back at Crompton, Oldham Leisure Services. ISBN   0-902809-17-2
  15. Gurr & Hunt 1998, p. 49
  16. Gurr & Hunt 1998, p. 108
  17. The Engineer of 20 January 1888 p50 & p55

Bibliography