 | This article needs additional citations for verification .(November 2018) |
The Nissan UD series of diesel engines were produced by Nissan in a range of configurations from three to twelve cylinders, all sharing the same internal dimensions. The engines were mainly used in heavy applications, such as buses and trucks produced from 1990 through 1998. [1]
All engines retain the same bore and stroke ratio - 110 mm x 130 mm.
Applications:
Applications:
my shipping container
Applications:
Applications:
Applications:
Applications:
Nowadays, these engines find applications in boats as an alternative to Cummins diesels. [2]
The GA engine is a 1.3 to 1.6 L inline-four piston engine from Nissan. It has a cast-iron block and an aluminum head. There are SOHC and DOHC versions, 8, 12, and 16 valve versions, carbureted, single-point, and multi-point injected versions, and versions with variable valve timing (GA16DE). The GA was produced from August 1987 through 2013. Since 1998, it was only available from Mexico in the B13.
The Nissan Patrol is a series of full-size SUVs manufactured by Nissan in Japan and sold throughout the world.
The CA engine is a series of 1.6 to 2.0 L Inline-4 piston engines from Nissan. It is designed for a wide variety of smaller Nissan vehicles to replace the Z engine and some smaller, four-cylinder L series engines. The "CA" stands for Clean Air, due to the installation of Nissan emission reducing technology, called NAPS-X.
The Toyota R family was a series of inline-four gasoline automobile engines. Designed for longitudinal placement in such vehicles as the Celica and Hilux and in production from 1953 through 1997, usage faded out as many of Toyota's mainstream models moved to front-wheel drive. Overhead cam (OHC) versions featured a chain-driven camshaft.
The Nissan H series of automobile engines is an evolution of the Nissan "R" engine which was based on the 1.5-liter, three-main bearing "G" engine used in the 1960s. Both inline-four and inline-six versions were produced. It is a pushrod OHV design with iron block, early models with an iron head, later models with aluminum head. Versions of this motor have been used in many Nissan autos and forklifts, well into the eighties and a version called H20II is still in production today. The SD diesels are based on this series of motors
The Nissan L series of automobile engines was produced from 1967 through 1986 in both inline-four and inline-six configurations ranging from 1.3 L to 2.8 L. It is a two-valves per cylinder SOHC non-crossflow engine, with an iron block and an aluminium head. It was the engine of the Datsun 510, Datsun 240Z sports car, and the Nissan Maxima. These engines are known for their reliability, durability, and parts interchangeability.
The Nissan Z engine is a series of automobile and light truck four-cylinder engines that was engineered by Nissan Machinery, manufactured by the Nissan Motor Company from 1979 through August 1989. All Z engines had 4 cylinders, a total of 8 valves and a single overhead camshaft (SOHC). Displacements ranged from 1.6 L to 2.4 L.The Z series' engine blocks were nearly identical to those of the earlier L Series with the exception of the Z24. While the Z16 and Z18 engines had a deck height similar to the earlier L13/L14/L16/L18 variants, the Z24 had a taller deck height to accommodate a longer stroke. The most notable difference between the Z-series engine and its predecessor was the introduction of a new crossflow cylinder head which reduced emissions by moving the intake ports to the right side of the engine opposite the exhaust ports. This change allows the exhaust port velocity to more effectively scavenge the cylinder and reduce reversion pulses to enhance induction. This change also limits maximum valve lift/lobe lift profiles rendering the cylinder head and valve train configuration undesirable for high-performance uses. The Z series evolved into the NA and KA engines which, along with the smaller CA series, replaced the Z series.
The Prince G-series engine was the company's only straight-four and straight-six engines which began production in 1955. A number of variations were made, with both OHV and OHC heads. A diesel four-cylinder with 1.9 L (1,862 cc) was also built, called the D-6. The G series was used in the Skyline, the Laurel, and the Gloria from the 1950s to the early 1970s.
The Datsun Truck is a compact pickup truck made by Nissan in Japan from 1955 through 1997. It was originally sold under the Datsun brand, but this was switched to Nissan in 1983. It was replaced in 1997 by the Frontier and Navara. In Japan, it was sold only in Nissan Bluebird Store locations.
The Nissan J series are straight-4 and straight-6 gasoline internal combustion engines produced by Nissan from the 1960s through the 1980s. It is similar to the BMC B-Series engine that was built in Japan under licence as the Nissan 1H before being de-stroked to become the 1.0 L Nissan C and 1.2 L Nissan E engines, but wasn't a direct copy.
The Nissan MR engine family consists of straight-four 16-valve all-aluminium automobile engines with variable valve timing co-developed by Renault and Nissan. Renault calls it the M engine. Other noteworthy features of this engine family include acoustically equal runner lengths and a tumble control valve for the intake manifold, a "silent" timing chain, mirror finished crankshaft and camshaft journals, and offset cylinder placement in an attempt for increased efficiency.
UD Trucks Corporation is a Japanese company whose principal business is the manufacturing and sales of diesel trucks, buses, bus chassis and special-purpose vehicles. Its headquarters are located in Ageo, Saitama, Japan. The company is a wholly owned subsidiary of Isuzu since 2021. Until 2010, the company was known as Nissan Diesel.
The Mitsubishi Fuso Canter is a line of light-duty commercial vehicles manufactured by Mitsubishi Fuso Truck and Bus Corporation, part of Daimler Truck, subsidiary of Mercedes-Benz Group. The Canter is manufactured since 1963, now in its eighth generation. The Canter is named after the English word describing the gait of a horse, emphasising the 'thoroughbred' nature of Mitsubishi trucks.
The SD engine was replaced by the Nissan TD engine. It was manufactured by Minsei Diesel Industries, Ltd., which was renamed Nissan Diesel Motor Co., Ltd in 1960.
The Nissan P engine is a large overhead valve, inline-six cylinder engine manufactured by Nissan Diesel Motor Co., Ltd. from 1959 to 2003 and used in light-duty trucks by Nissan, as well as in the Nissan Patrol. It replaced Nissan's older, sidevalve engines with which it shared its dimensions. This series of engines were based on the pre-war Type A engine, which was a license built Graham-Paige design.
Nissan Cabstar is the name used in Japan for two lines of pickup trucks and light commercial vehicles sold by Nissan and built by UD Nissan Diesel, a Volvo AB company and by Renault-Nissan Alliance for the European market. The name originated with the 1968 Datsun Cabstar, but this was gradually changed over to "Nissan" badging in the early 1980s. The lighter range replaced the earlier Cabstar and Homer, while the heavier Caball and Clipper were replaced by the 2-4 ton range Atlas (kana:日産・アトラス). The nameplate was first introduced in December 1981.The Cabstar is known also as the Nissan Cabstar, Renault Maxity and Samsung SV110 depending on the location. The range has been sold around the world. It shares its platform with the Nissan Caravan. In spring 2014, Cabstar is now known as NT400.
The International R series is a model range of trucks that was manufactured by International Harvester. Introduced in 1953 as the replacement for the International L series, the model line marked the introduction of the IH "tractor" grille emblem on International road vehicles. Sharing a cab with its predecessor, the R-series marked the introduction of four-wheel drive vehicles and the wider use of diesel engines.
The Nissan Junior was a series of medium-sized pickup trucks built from 1956 until 1982. It was introduced to fill the gap between the smaller, Datsun Bluebird based Datsun Truck, and heavier load capacity Nissans under the Nissan Diesel brand, like the 80-series trucks. After the merger with Prince Motor Company, the Junior and the Prince Miler were combined, sharing most of the characteristics, with the Junior sold at Nissan Bluebird Store Japanese dealerships, and the Miler sold at Nissan Prince Store until 1970.
The Renault Maxity is a light commercial vehicle with a cab-over-engine style truck launched by the French manufacturer Renault Trucks in 2007. The Maxity is nearly identical to the Nissan Cabstar, sharing the same drive-train and engine options and manufactured on the same Nissan owned production line in Avila, Spain. While the sharing of engines and production facilities is part of the Renault-Nissan Alliance, the vehicle is sold by Renault Trucks which is owned by Volvo.
The Nissan C80 was a medium-duty cabover truck manufactured by the Japanese automaker Nissan. The 3.5 ton C80 was introduced in 1966 to fill the gap between the 2 ton Nissan Caball and the 5 ton Nissan 680. Like the Caball, the C80 was a cab forward truck, shared with the Nissan Civilian. Two engines were available: the 3.0L H30 inline-6 that produced 120 horsepower, or the SD33 inline-6 diesel that produced 98 horsepower. The transmission was a column-shift 4-speed manual, but a 5-speed was offered as an option. There were no significant changes made to the C80 while in production when it was discontinued in 1976. It was exclusive to Japanese Nissan dealerships called Nissan Bluebird Store.
