Nissan A engine

Last updated
Nissan A engine
1969 Datsun Sunny engine.jpg
Nissan A10 engine (1969)
Overview
Manufacturer Nissan
Production19672009
Layout
Configuration Inline-four cylinder
Displacement
  • 1.0 L (988 cc)
  • 1.2 L (1,171 cc)
  • 1.2 L (1,237 cc)
  • 1.3 L (1,270 cc)
  • 1.3 L (1,288 cc)
  • 1.4 L (1,397 cc)
  • 1.5 L (1,487 cc)
Cylinder bore
  • 73 mm (2.87 in)
  • 75 mm (2.95 in)
  • 76 mm (2.99 in)
Piston stroke
  • 59 mm (2.32 in)
  • 70 mm (2.76 in)
  • 77 mm (3.03 in)
  • 82 mm (3.23 in)
Valvetrain OHV, 2 valves per cylinder
Combustion
Fuel system Carburettor
Fuel type Gasoline
Cooling system Water-cooled
Output
Power output From 59 PS (43 kW; 58 hp) to 92 PS (68 kW; 91 hp)
Torque output From 8.3 kg⋅m (81 N⋅m; 60 lb⋅ft)
Chronology
Predecessor Nissan C engine / Nissan E engine (OHV)
Successor Nissan E engine (OHC)

The Nissan A series of internal combustion gasoline engines have been used in Datsun, Nissan and Premier brand vehicles. Displacements of this four-stroke engine family ranged from 1.0-liter to 1.5-liter and have been produced from 1967 till 2009. It is a small-displacement four-cylinder straight engine. It uses a lightweight cast iron block and an aluminum cylinder head, with overhead valves actuated by pushrods.

Contents

The Nissan A engine design is a refined, quiet and durable gasoline engine. It appears to be a modern replacement of the earlier iron-headed Nissan C and Nissan E engines and is of similar dimensions. The 1960s E series was an all-new design from newly acquired Aichi Kokuki, and integrated Nissan's improvements to the BMC B-Series engine design of the 1950s (Nissan was a licensee of Austin Motor Company technology), mainly comprising changing the camshaft from the left side to the right side so removing the intrusion of the pushrods from the porting allowing for eight individual ports instead of the original five, and moving the oil pump from the rear of the camshaft to the right side of the block. As production continued, 1974 and newer A-series engines had different block castings, with relocated motor mount bosses.

A10: the first A-series engine

The A10 is a 1.0-liter (988 cc) engine, released in September 1966 in the 1967 model year Datsun 1000. The A10 featured a three main bearing crankshaft. Bore was 73 mm and stroke was 59 mm (same as the Nissan C engine). With a two-barrel Hitachi carburetor and an 8.5 to 1 compression ratio this engine produced 62 PS (46 kW; 61 hp) at 6000 rpm and 8.5 kg⋅m (83 N⋅m; 61 lb⋅ft). The Datsun 1000 Coupé, introduced in Sept 1968, was equipped with an uprated A10 engine boasting a free flowing dual outlet exhaust manifold with increased compression, now 9 to 1. With a revised carburetor, this engine produced 66 PS (49 kW; 65 hp). Export versions of the A10 as installed in the Datsun 100A produced 59 PS (43 kW; 58 hp) SAE at 6000 rpm and 8.3 kg⋅m (81 N⋅m; 60 lb⋅ft) at 4000 rpm. [1]

A belt-driven SOHC version of the A10 was built as the E10 into the early nineties.

Applications

A12 (1200): further refinements

The A12 is a 1,171 cc (1.2 L; 71 cu in) engine with a 73 mm (2.9 in) bore, like the previous A10 engine, but with its stroke increased to 70 mm (2.8 in). With five main bearings on a forged steel crankshaft, the engine is extremely smooth and durable. The two-barrel (twin-choke) Hitachi carburettor was significantly improved with the addition of a power valve circuit. The A12 engine produced 70 PS (51 kW; 69 hp) and 70 ft⋅lb (95 N⋅m) torque.

A special version of the A12 called the "A12 GX" engine, was available (A12GX or A12T for front-wheel drive applications). With twin Hitachi sidedraft carburetors, a longer duration camshaft and 10:1 compression ratio, it delivered 83 PS (61 kW; 82 hp) at 6400 rpm, up 20 percent from a standard A12 engine. The GX engine was offered in Japanese Domestic Market Nissan Sunny 1200 GX sedans and coupes. The identical specification A12T engine was offered in the front-wheel-drive Nissan Cherry X-1. [2]

The A12T engine in a Cherry X-1 1970 Nissan Cherry 1200X-1 engine.jpg
The A12T engine in a Cherry X-1

An overbored version of the A12 was used in period race cars, including Nissan factory (works) racing Sunnys. Many were overbored from the original 73 mm (2.9 in) to 76.76 mm (3.022 in) using Tomei forged pistons for a displacement of 1,296 cc (79.1 cu in), while others used 76 mm (3.0 in) Datsun Competition forged pistons, for a displacement of 1,270 cc (78 cu in). These legendary engines competed in Japan's Touring Sedan (TS) class races against the 1200s archrival Toyota Starlet. [3]

Perhaps the most interesting variety of A series engines was the AY12 engine. This was a special race-only Nissan factory (works) racing version with a crossflow cylinder head. [4]

The AY12 was used in an under 1,300 cc (79 cu in)-class with a 76–76.8 mm (2.99–3.02 in) bore diameter. The intake valve was 40–41 mm (1.57–1.61 in) and exhaust valves were 33–34 mm (1.30–1.34 in). The pistons were also a special design and the valve rocker system was different from the standard A12 due to the use of a crossflow layout for the racing engine.

Applications

1974 redesign

For the 1974 model year, the A engine was modified, and all subsequent A engines use the new block style. Since there was increasing need for accessories like air conditioning, anti-pollution air pumps and the like, the distributor was moved from the front side of the engine to the middle of the block to make room for these accessories. Additionally, the motor mount positions were moved slightly. Nissan introduced its emission control technology, called NAPS (Nissan NAPS) with the redesign.

This "new" A12 retained the same bore, stroke and most other specifications of the previous A12.

Applications

A12A

The A12A is a 1.2-liter (1,237 cc) engine. It used a casting similar to the A12 and same stroke, but used a 75 mm bore (up from 73 mm), for an increase of 66 cc capacity. It too was of an overhead valve design. The A12A also uses a different (stronger) conrod with a larger diameter gudgeon pin.

The A12A shared a common block and crankshaft with the redesigned A12 and A13 engines.

Applications

A13 (1974): the first tall-deck A engine

The 1974 A13 is a 1.3-liter (1288 cc) engine with 73 mm bore like the A10 and A12 above, but stroke increased to 77 mm, and compression ratio reduced to 8.5:1. This engine features a "tall-block" with a deck height 15 mm (0.59 in) higher than previous A-series engines.

Applications

Making this engine a 75 hp (56 kW). An important fact is that this model only existed in the 1974 model year.

A13 (1979–1982) – short-deck engine

The redesigned A13 is a 1.3-liter engine. It used the same basic block casting as the A12 and same stroke of 70 mm, but used a 76 mm bore for a displacement of 1,270 cc. This engine was also used as the basis for a number of Formula Pacific and Formula 3 race engines.

Applications

A14

The A14 is a 1.4-liter (1397 cc) engine produced from the 1975 Model year through 2008. The bore was increased to 76 mm, up from 73 mm of previous A-series engines. Like the previous A13 engine, the A14 is a "tall-block" variant. It was produced in various ratings from 50 to 92 PS (37 to 68 kW).

A twin-carburetor "GX" version of this engine (A14T) was available in some markets.

Applications

A fuel-injected version (A14E) was offered in the Japanese market in the B310 Sunny.

A15 – Stroker motor

A15 in a Grove-Manlift Grove Nissan A15.jpg
A15 in a Grove-Manlift

The A15 is a 1.5-liter (1,487 cc) engine produced from 1979 till 2009 where it was used in the Malaysian Vanette C22. The stroke was increased by 5 mm from the A14 engine to now measure 82 mm, while the bore remained 76 mm. It produces 80 PS (59 kW; 79 hp). It used only a different block casting number, but retained the same "tall-block" deck height, measurements and BMEP as the A14. In the Nissan B120 Sunny "RoadStar" truck it is capable of 49 mpg (17,3 km/L). [9]

A fuel-injected version of the A15 (A15E) was offered in Asian markets.

Applications

See also

Related Research Articles

<span class="mw-page-title-main">Nissan VQ engine</span> Reciprocating internal combustion engine

The VQ is a family of V6 automobile petrol engines developed by Nissan and produced in displacements varying from 2.0 L to 4.0 L. Designed to replace the VG series, the all-aluminium 4-valve per cylinder DOHC design debuted with Nissan's EGI/ECCS sequential multi-point fuel injection (MPFI) system. Changes from the VG engine include switching to a timing chain from a timing belt, and relocating the water pump from the outside of the engine to inside the timing cover where the pump is driven by the timing chain. Later versions featured various improvements, such as variable valve timing, and NEO-Di designated VQ engines replace MPFI with direct fuel injection.

<span class="mw-page-title-main">Nissan Sunny</span> Car model produced by Nissan

The Nissan Sunny is an automobile built by the Japanese automaker Nissan from 1966 till 2004. In the early 1980s, the brand changed from Datsun to Nissan in line with other models by the company. Although production of the Sunny in Japan ended in 2004, the name remains in use in China and GCC countries for a rebadged version of the Nissan Almera.

<span class="mw-page-title-main">Nissan SR engine</span> Reciprocating internal combustion engine

The SR engine is a series of 1.6 L (1,596 cc), 1.8 L (1,838 cc) or 2.0 L (1,998 cc) straight-four, four-stroke gasoline engines manufactured by Nissan. It has an aluminium head and block with steel sleeves and has a DOHC 4-valve design, with variable valve timing on select models. It was added to a new engine family name PLASMA.

<span class="mw-page-title-main">Nissan KA engine</span> Reciprocating internal combustion engine

The KA engines were a series of four-stroke inline-four gasoline piston engines manufactured by Nissan, which were offered in 2.0 and 2.4 L. The engines blocks were made of cast-iron, while the cylinder heads were made of aluminum.

<span class="mw-page-title-main">Nissan GA engine</span> Reciprocating internal combustion engine

The GA engine is a 1.3 to 1.6 L inline-four piston engine from Nissan. It has a cast-iron block and an aluminum head. There are SOHC and DOHC versions, 8, 12, and 16 valve versions, carbureted, single-point, and multi-point injected versions, and versions with variable valve timing (GA16DE). The GA was produced from August 1987 through 2013. Since 1998, it was only available from Mexico in the B13.

<span class="mw-page-title-main">Nissan Fairlady Z (S30)</span> Japanese sports car produced 1969 to 1978

The Nissan S30, sold in Japan as the Nissan Fairlady Z, but for export badged as the Datsun 240Z, and later as the Datsun 260Z and 280Z, are 2-seat sports cars and 2+2 GT cars produced by Nissan, from 1969 until 1978. The S30 was conceived of by Yutaka Katayama, the President of Nissan Motor Corporation U.S.A., and designed by a team led by Yoshihiko Matsuo, the head of Nissan's Sports Car Styling Studio. It is the first car in Nissan's Z series of sports cars.

<span class="mw-page-title-main">Nissan CA engine</span> Reciprocating internal combustion engine

The CA engine is a series of 1.6 to 2.0 L Inline-4 piston engines from Nissan. It is designed for a wide variety of smaller Nissan vehicles to replace the Z engine and some smaller, four-cylinder L series engines. The "CA" stands for Clean Air, due to the installation of Nissan emission reducing technology, called NAPS-X.

<span class="mw-page-title-main">Nissan Pulsar</span> Motor vehicle

The Nissan Pulsar is a line of automobiles produced by the Japanese automaker Nissan from 1978 until 2000, when it was replaced by the Nissan Bluebird Sylphy in the Japanese market.

<span class="mw-page-title-main">Nissan Vanette</span> Motor vehicle

The Nissan Vanette is a cabover van and pickup truck produced by the Japanese automaker Nissan from 1978 until 2011. The first two generations were engineered by Nissan's Aichi Manufacturing Division for private, personal ownership, with the last two generations built by Mazda, rebadged as Nissans and refocused as commercial vehicles, based on the Mazda Bongo. The van has also been sold as the Nissan Sunny-Vanette or Nissan Van. The private purchase passenger platform was replaced by the Nissan Serena in 1991, renamed Vanette in various international markets, and came equipped with multiple engine and drivetrain configurations.

<span class="mw-page-title-main">Nissan E engine</span> Type of automobile engine

The Nissan E series name was used on two types of automobile engines. The first was an OHV line used in the late 1950s and throughout the 1960s. The second was an OHC version ranging from 1.0 to 1.6 litres and was produced from 1981 till 1988. It was replaced by the GA engine series.

The Nissan H series of automobile engines is an evolution of the Nissan "R" engine which was based on the 1.5-liter, three-main bearing "G" engine used in the 1960s. Both inline-four and inline-six versions were produced. It is a pushrod OHV design with iron block, early models with an iron head, later models with aluminum head. Versions of this motor have been used in many Nissan autos and forklifts, well into the eighties and a version called H20II was in production until 2003. The SD diesels are based on this series of motors

<span class="mw-page-title-main">Nissan L engine</span> Reciprocating internal combustion engine

The Nissan L series of automobile engines was produced from 1966 through 1986 in both inline-four and inline-six configurations ranging from 1.3 L to 2.8 L. It is a two-valves per cylinder SOHC non-crossflow engine, with an iron block and an aluminium head. It was most notable as the engine of the Datsun 510, Datsun 240Z sports car, and the Nissan Maxima. These engines are known for their reliability, durability, and parts interchangeability.

<span class="mw-page-title-main">Nissan Z engine</span> Reciprocating internal combustion engine

The Nissan Z engine is a series of automobile and light truck four-cylinder engines that was engineered by Nissan Machinery, manufactured by the Nissan Motor Company from 1979 through August 1989. All Z engines had 4 cylinders, a total of 8 valves and a single overhead camshaft (SOHC). Displacements ranged from 1.6 L to 2.4 L.The Z series' engine blocks were nearly identical to those of the earlier L Series with the exception of the Z24. While the Z16 and Z18 engines had a deck height similar to the earlier L13/L14/L16/L18 variants, the Z24 had a taller deck height to accommodate a longer stroke. The most notable difference between the Z-series engine and its predecessor was the introduction of a new crossflow cylinder head which reduced emissions by moving the intake ports to the right side of the engine opposite the exhaust ports. This change allows the exhaust port velocity to more effectively scavenge the cylinder and reduce reversion pulses to enhance induction. This change also limits maximum valve lift/lobe lift profiles rendering the cylinder head and valve train configuration undesirable for high-performance uses. The Z series evolved into the NA and KA engines which, along with the smaller CA series, replaced the Z series.

<span class="mw-page-title-main">Nissan J engine</span> Reciprocating internal combustion engine

The Nissan J series are straight-4 and straight-6 gasoline internal combustion engines produced by Nissan from the 1960s through the 1980s. It is similar to the BMC B-Series engine that was built in Japan under licence as the Nissan 1H before being de-stroked to become the 1.0 L Nissan C and 1.2 L Nissan E engines, but wasn't a direct copy.

<span class="mw-page-title-main">Nissan MR engine</span> Kind of engine made by Nissan

The Renault-Nissan MR engine family consists of straight-four 16-valve all-aluminium and water cooled automobile engines with variable valve timing co-developed by Renault and Nissan. Renault calls it the M engine. Other noteworthy features of this engine family include acoustically equal runner lengths and a tumble control valve for the intake manifold, a "silent" timing chain, mirror finished crankshaft and camshaft journals, and offset cylinder placement in an attempt for increased efficiency.

<span class="mw-page-title-main">Nissan HR engine</span> Reciprocating internal combustion engine

The HR is a family of straight-3 12-valve and straight-4 16-valve automobile engines with continuously variable valve timing, involving development by Nissan and/or Renault, and also Mercedes-Benz in the case of the H5Ht/M282. The designation of H engine is used by Renault, and M28x by Mercedes-Benz, to classify the family. There are three basic specifications of engine involving variations in engine architecture, or all-new architecture, with 72.2 mm (2.84 in), 75.5 mm (2.97 in) and 78 mm (3.07 in) bore diameter.

<span class="mw-page-title-main">Nissan MA engine</span> Reciprocating internal combustion engine

The MA is a straight-4 SOHC 0.9 L, 1.0 L, or 1.2 L engine first introduced in 1982 by Nissan, intended primarily for the K10 series Micra/March model. It shares design similarities with the older E engine, with an 8-valve hemispherical cylinder head but differs in that it uses an aluminium cylinder block. Unusually, the specified ignition timing for the MA10 running on the specified 90 RON gasoline was 2 degrees after top dead centre, reflecting a very high flame speed in the compact combustion chambers.

<span class="mw-page-title-main">Nissan Cherry</span> Subcompact car series produced by Datsun and Nissan (1970-1986)

The Datsun Cherry (チェリー), known later as the Nissan Cherry, is a series of subcompact cars which formed Nissan's first front-wheel drive supermini model line.

<span class="mw-page-title-main">Nissan P engine</span> Reciprocating internal combustion engine

The Nissan P engine is a large overhead valve, inline-six cylinder engine manufactured by Nissan Diesel Motor Co., Ltd. from 1959 to 2003 and used in light-duty trucks by Nissan, as well as in the Nissan Patrol. It replaced Nissan's older, sidevalve engines with which it shared its dimensions. This series of engines were based on the pre-war Type A engine, which was a license built Graham-Paige design.

<span class="mw-page-title-main">Volkswagen EA827 engine</span> Family of petrol engines

The EA827 family of petrol engines was initially developed by Audi under Ludwig Kraus leadership and introduced in 1972 by the B1-series Audi 80, and went on to power many Volkswagen Group models, with later derivatives of the engine still in production into the 2010s. This is a very robust water-cooled engine configuration for four- up to eight- cylinders. In Brazil this engine was produced under the name Volkswagen AP AP.

References

  1. Datsun 100A (brochure) (in Greek), Japan: Nissan Motor Co., Ltd., 1972, p. 15, H03B
  2. Datsun 1200.com
  3. Datsun 1200.com
  4. lid=2521 Datsun 1200.com (photo)
  5. 1 2 Nissan Sunny Vanette (catalog), Nissan Motor Co, p. 19, 8101D
  6. Datsun Sunny (catalog), Nissan Motor Co, p. 29, 8053T711
  7. Costa, André & Georges-Michel Fraichard, ed. (September 1979). "Datsun Cherry". Salon 1979: Toutes les Voitures du Monde (in French) (14 & 15). Paris: l'Auto Journal: 176.
  8. Lösch, Annamaria, ed. (1980). World Cars 1980. Pelham, NY: The Automobile Club of Italy/Herald Books. p. 368. ISBN   0-910714-12-6.
  9. 1 2 Datsun RoadStar/SportStar Options, Nissan New Zealand, retrieved 2011-02-13