This article needs additional citations for verification .(October 2012) |
This article relies largely or entirely on a single source .(November 2018) |
Nissan VRT35 engine | |
---|---|
Overview | |
Manufacturer | Nissan |
Layout | |
Configuration | 70° V12 |
Displacement | 3.5 L (3,499 cc) |
Cylinder bore | 83 mm (3.27 in) |
Piston stroke | 54 mm (2.13 in) |
Valvetrain | DOHC 4 valves x cyl. |
Combustion | |
Fuel system | Fuel injection |
Fuel type | Gasoline |
Cooling system | Water-cooled |
Output | |
Power output | 630 hp (470 kW) |
Specific power | 180.1 hp (134.3 kW) per liter |
Torque output | 289 lb⋅ft (392 N⋅m) |
The VRT35 is 3.5L V12 piston engine from Nissan. It was developed for competition racing during the early 1990s by Nissan's motorsport division Nismo.
Originally developed to be used in the Nissan P35 race car for Group C racing, the VRT35 would later see use in the 1992 All Japan Sports Prototype Championship. Required to be 3.5 litres by Group C rules, the engine had to not only be high-revving like a Formula One engine, but also have endurance capabilities. Nismo produced an engine at 3.5 L (3,499 cc) named the VRT35, with claims of 630 PS (463 kW) and capable of reaching nearly 12000 rpm. The VRT35 would be a V12, in comparison to Peugeot, Toyota, and Mazda's V10 units. Johnny O'Connell, a test driver for the Nissan P35 race car once said "Well it was about the most amazing sounding engine I have driven. It totally screamed.". [1]
The Nissan Z-series is a model series of sports cars manufactured by Nissan in seven generations since 1969.
The Nissan Skyline GT-R is a sports car based on the Nissan Skyline range. The first cars named "Skyline GT-R" were produced between 1969 and 1972 under the model code KPGC10, and were successful in Japanese touring car racing events. This model was followed by a brief production run of second-generation cars, under model code KPGC110, in 1973.
The Nissan 350Z is a two-door, two-seater sports car that was manufactured by Nissan Motor Corporation from 2002 until 2009 and marks the fifth generation of Nissan's Z-car line. The 350Z entered production in 2002 and was sold and marketed as a 2003 model from August 2002. The first year there was only a coupe, as the roadster did not debut until the following year. Initially, the coupe came in Base, Enthusiast, Performance, Touring and Track versions, while the Roadster was limited to Enthusiast and Touring trim levels. The Track trim came with lightweight wheels and Brembo brakes, but its suspension tuning was the same as all other coupes. The Nissan 350Z was succeeded by the 370Z for the 2009 model year.
The VK engine is a V8 piston engine from Nissan. It is an aluminum DOHC 4-valve design.
The VH series consists of 4.1 and 4.5 litres engines built from 1989 to 2001 by the Nissan Motor Corporation. The design consists of a 90-degree V8 with an aluminium cylinder block that features a closed upper deck and a deep skirt. The cylinder heads are also aluminium with a DOHC 4 valves design and pentroof combustion chambers. The production blocks and production head castings were used successfully in various forms of racing including the IRL.
The VQ is a family of V6 24V automobile engines developed by Nissan with displacements varying from 2.0 L to 4.0 L. It is an aluminum block DOHC 4-valve design with aluminum heads. It is fitted with Nissan's EGI/ECCS sequential multi-point fuel injection (MPFI) system. Later versions feature various implementations of variable valve timing and replace MPFI with direct fuel injection. The VQ series engine was honored by Ward's 10 Best Engines list almost every year from the list's inception. The VQ series replaced the VG series of engines.
The RB engine is an oversquare 2.0–3.0 L straight-6 four-stroke gasoline engine from Nissan, originally produced from 1985 to 2004. The RB followed the 1983 VG-series V6 engines to offer a full, modern range in both straight or V layouts.
The VG engine family consists of V6 engines designed and produced by Nissan for several vehicles in the Nissan lineup. The VG series was introduced in 1983, becoming Nissan's and Japan's first mass-produced V6 engine. VG engines displace between 2.0 and 3.3 liters and feature an iron block and aluminum heads at a 60° vee-angle. The early VG engines featured a SOHC arrangement with two valves per cylinder. Later versions featured a slightly different block, a DOHC arrangement with four valves per cylinder, and N-VCT, Nissan's own version of variable valve timing, for a smoother idle and more torque at low to medium engine speeds. The production blocks and production head castings were used successfully in the Nissan GTP ZX-Turbo and NPT-90 race cars which won the IMSA GT Championship three years in a row.
The SR engine is a series of 1.6 L (1,596 cc), 1.8 L (1,838 cc) or 2.0 L (1,998 cc) straight-four, four-stroke gasoline engines manufactured by Nissan. It has an aluminum head and cast-iron block with steel sleeves and has a DOHC 4-valve design, with variable valve timing on select models.
The Nissan Pulsar is a line of automobiles produced by the Japanese automaker Nissan from 1978 until 2000, when it was replaced by the Nissan Bluebird Sylphy in the Japanese market.
The Ferrari Lampredi engine was a naturally aspirated all aluminum 60° V12 engine produced between 1950 and 1959. Inline-4 and Inline-6 variants for racing were derived from it.
The Nissan A series of internal combustion gasoline engines have been used in Datsun, Nissan and Premier brand vehicles. Displacements of this four-stroke engine family ranged from 1.0-liter to 1.5-liter and have been produced from 1967 till 2009. It is a small-displacement four-cylinder straight engine. It uses a lightweight cast iron block and an aluminum cylinder head, with overhead valves actuated by pushrods.
The Nissan L series of automobile engines was produced from 1967 through 1986 in both inline-four and inline-six configurations ranging from 1.3 L to 2.8 L. This was the engine of the Datsun 510, Datsun 240Z sports car, and Nissan Maxima. These engines are known for their reliability, durability, and parts interchangeability. It is a two-valves per cylinder SOHC non-crossflow engine, with an iron block and an aluminium head. The four-cylinder L series engines were replaced with the Z series and later the CA series, while the six-cylinder L series engines were replaced with the VG series and RB series.
The Nissan Z engine is a series of automobile and light truck four-cylinder engines that was engineered by Nissan Machinery, manufactured by the Nissan Motor Company from 1979 through August 1989. All Z engines had 4 cylinders, a total of 8 valves and a single overhead camshaft (SOHC). Displacements ranged from 1.6 L to 2.4 L.The Z series' engine blocks were nearly identical to those of the earlier L Series with the exception of the Z24. While the Z16 and Z18 engines had a deck height similar to the earlier L13/L14/L16/L18 variants, the Z24 had a taller deck height to accommodate a longer stroke. The most notable difference between the Z-series engine and its predecessor was the introduction of a new crossflow cylinder head which reduced emissions by moving the intake ports to the right side of the engine opposite the exhaust ports. This change allows the exhaust port velocity to more effectively scavenge the cylinder and reduce reversion pulses to enhance induction. This change also limits maximum valve lift/lobe lift profiles rendering the cylinder head and valve train configuration undesirable for high-performance uses. The Z series evolved into the NA and KA engines which, along with the smaller CA series, replaced the Z series.
The Prince G-series engine was the company's only straight-four and straight-six engines which began production in 1955. A number of variations were made, with both OHV and OHC heads. A diesel four-cylinder with 1.9 L (1,862 cc) was also built, called the D-6. The G series was used in the Skyline, the Laurel, and the Gloria from the 1950s to the early 1970s.
The Nissan MR engine family consists of straight-four 16-valve all-aluminium automobile engines with variable valve timing co-developed by Renault and Nissan. Renault calls it the M engine. Other noteworthy features of this engine family include acoustically equal runner lengths and a tumble control valve for the intake manifold, a "silent" timing chain, mirror finished crankshaft and camshaft journals, and offset cylinder placement in an attempt for increased efficiency.
The Nissan R390 GT1 was a racing car built in Atsugi, Japan. It was designed primarily to gain a suitable racing entry in the 24 Hours of Le Mans in 1997 and 1998. It was built to race under the grand touring style rules, requiring a homologated road version to be built. Therefore, the R390 was built originally as road car, then a racing version of the car was developed afterwards. Only one R390 road car was ever built and is stored at Nissan's Zama facility, although one of the race cars was later modified for road use. The road car was claimed to be capable of attaining a top speed of 354 km/h (220 mph). However, this claim has never been proven.
The Nissan GT-R, is a high-performance sports car and grand tourer produced by Nissan, unveiled in 2007. It is the successor to the Skyline GT-R, a high performance variant of the Nissan Skyline. Although this car was the sixth-generation model to bear the GT-R name, the model is no longer part of the Nissan Skyline model line up since that name is now reserved for Nissan's luxury-sport vehicles. The GT-R is built on the exclusively-developed Nissan PM platform, which is an enhanced evolution of the Nissan FM platform used in the separate Nissan Skyline luxury car and the Nissan Z sports car. The GT-R abbreviation stands for Gran Turismo–Racing, obtained from the Skyline GT-R.
The Nissan P35 was a planned Group C car built by Nissan Motors for competition in the World Sportscar Championship. Developed by Nissan Performance Technology Inc. (NPTI), which had formerly raced under the name Electramotive in the United States, the cars were intended to be completed by the middle of 1992, with competition starting in 1993. However economic troubles for Nissan led to the cancellation of the project soon after testing of the first cars had begun, meaning that the P35s never raced.
The Nissan VRH engine family consists of several racing engines built by Nissan Motor Company beginning in the late 1980s. All VRH engines are in a V8 configuration, with either natural aspiration or forced induction. Some VRH engines are loosely based on Nissan's production V8 engine blocks, including the VH and VK engines, while others were designed from the ground up for racing and share no components with production blocks.