Columbus Historic Riverfront Industrial District

Last updated

Columbus Historic Riverfront Industrial District
Muscogee Manufacturing Company, Front Avenue and Fourteenth Street, Columbus, Muscogee County, GA HAER GA,108-COLM,2-1.tif
Muscogee Mills, HABS photo, c. 1977
USA Georgia location map.svg
Red pog.svg
Locationsites along the Chattahoochee River between 8th St. N. and 38th St., Columbus, Georgia
Coordinates 32°28′53″N84°59′30″W / 32.48139°N 84.99167°W / 32.48139; -84.99167
Built1844
ArchitectMultiple
Architectural styleItalianate
NRHP reference No. 78000995
Significant dates
Added to NRHPJune 2, 1978 [1]
Designated NHLDJune 2, 1978 [2]

The Columbus Historic Riverfront Industrial District encompasses one of the most significant assemblages of 19th-century waterpowered mill technology in the American South. A National Historic Landmark District, it includes five historic industrial complexes with elements surviving as far back as the 1830s, located in four separate areas along the eastern bank of the Chattahoochee River in Columbus, Georgia. It was declared a National Historic Landmark in 1978. [2] [3]

Contents

History

The city of Columbus is located at the fall line of the Chattahoochee River, a place where the river drops 125 feet (38 m) in a stretch of 2.5 miles (4.0 km). This location was recognized early in the American Industrial Revolution as a prime location for waterpowered factories, and the river was first dammed in 1828 (by a predecessor to the now-breached City Mills Dam), beginning what became one of the South's largest 19th-century industrial complexes. Embedded in five major industrial sites are the remains of industrial components used in the transfer of water power, and for the early generation and transfer of electrical power. Included in these are the Eagle and Phenix Mills, once the South's largest textile operation. Columbus was a powerhouse of manufacturing for the Confederacy during the American Civil War. [3]

Bibb Mill

The main building of the Bibb Mill complex is a long five-story brick building, set on a bluff overlooking the river. Although it is an early 20th-century building, one of the smaller buildings in the complex includes remnants of a pulley and rope drive system. This system was used until 1954, when its main drive shaft broke. [3]

City Mills

The City Mills complex was built as a grist mill. The oldest building dates to 1869, and was built by Horace King, a well-known regional African-American contractor. The original 1828 dam was replaced in 1908, and the main building was adapted for electrical power generation and distribution. It houses power generators installed in 1919, some of which operated into the 1960s. [3]

Muscogee Mills

The Muscogee Mills include the broadest diversity of architecture of the surviving complexes, including both ornate 19th-century industrial architecture, and utilitarian 20th-century buildings, as well as the city's original Carnegie library. Traces of the original 1844 millrace are also still evident. [3]

Eagle and Phenix Mills

The Eagle and Phenix Mills complex consists of three main mills, oriented perpendicular to the river, all which have origins in 19th-century construction, but have generally been altered or extended. This mill's original raceway and dam (now breached) also survive to some degree. [3]

Columbus Ironworks

This complex's oldest buildings date to the early 20th century, its older buildings destroyed by fire in 1902. The complex includes several generations of early electrical equipment, including a DC generator and three AC generators. A portion of the property has been converted into a convention and event center. [3]

See also

Endnotes

  1. "National Register Information System". National Register of Historic Places . National Park Service. January 23, 2007.
  2. 1 2 "Columbus Historic Riverfront Industrial District". National Historic Landmark summary listing. National Park Service. Retrieved April 28, 2008.
  3. 1 2 3 4 5 6 7 John S. Lupold (February 10, 1978). "National Register of Historic Places Inventory-Nomination: Columbus Historic Riverfront Industrial District" (pdf). National Park Service.{{cite journal}}: Cite journal requires |journal= (help) and Accompanying 16 photos, exteriors and interiors, from c. 1910, 1924, 1940, 1966, and 1977  (32 KB)

Related Research Articles

<span class="mw-page-title-main">Muscogee County, Georgia</span> County in Georgia, United States

Muscogee County is a county located on the central western border of the U.S. state of Georgia named after the Muscogee that originally inhabited the land with its western border with the state of Alabama that is formed by the Chattahoochee River. As of the 2020 census, the population was 206,922. Its county seat and only city is Columbus, with which it has been a consolidated city-county since the beginning of 1971.

<span class="mw-page-title-main">Chattahoochee County, Georgia</span> County in Georgia, United States

Chattahoochee County, also known as Cusseta-Chattahoochee County, is a county located on the western border in central Georgia. As of the 2020 census, the population was 9,565. The county seat is Cusseta, with which the county shares a consolidated city-county government. The city of Cusseta remains a geographically distinct municipality within Chattahoochee County. The county was created on February 13, 1854.

<span class="mw-page-title-main">Columbus, Georgia</span> City in Georgia, United States

Columbus is a consolidated city-county located on the west-central border of the U.S. state of Georgia. Columbus lies on the Chattahoochee River directly across from Phenix City, Alabama. It is the county seat of Muscogee County, with which it officially merged in 1970; the original merger excluded Bibb City, which joined in 2000 after dissolving its own city charter.

<span class="mw-page-title-main">Saint Anthony Falls</span> Waterfall in Mississippi River into the Mississippi River Gorge in Minneapolis, Minnesota

Saint Anthony Falls, or the Falls of Saint Anthony, located at the northeastern edge of downtown Minneapolis, Minnesota, was the only natural major waterfall on the Mississippi River. Throughout the mid-to-late 1800s, various dams were built atop the east and west faces of the falls to support the milling industry that spurred the growth of the city of Minneapolis. In 1880, the central face of the falls was reinforced with a sloping timber apron to stop the upstream erosion of the falls. In the 1950s, the apron was rebuilt with concrete, which makes up the most visible portion of the falls today. A series of locks were constructed in the 1950s and 1960s to extend navigation to points upstream.

<span class="mw-page-title-main">Chattahoochee River</span> River in Georgia, United States

The Chattahoochee River is a river in the Southeastern United States. It forms the southern half of the Alabama and Georgia border, as well as a portion of the Florida and Georgia border. It is a tributary of the Apalachicola River, a relatively short river formed by the confluence of the Chattahoochee and Flint rivers and emptying from Florida into Apalachicola Bay in the Gulf of Mexico. The Chattahoochee River is about 430 miles (690 km) long. The Chattahoochee, Flint, and Apalachicola rivers together make up the Apalachicola–Chattahoochee–Flint River Basin. The Chattahoochee makes up the largest part of the ACF's drainage basin.

<span class="mw-page-title-main">Augusta Canal</span> United States historic place

The Augusta Canal is a historic canal located in Augusta, Georgia, United States. The canal is fed by the Savannah River and passes through three levels in suburban and urban Augusta before the water returns to the river at various locations. It was devised to harness the water power at the fall line of the Savannah River to drive mills, to provide transportation of goods, and to provide a municipal water supply. It is the only canal in the US in continuous use for its original purposes of providing power, transport, and municipal water.

The W. C. Bradley company is an American manufacturer of consumer goods. It comprises four companies based on home and leisure products and services: Char-Broil, Lamplight, and W. C. Bradley Co. Real Estate.

<span class="mw-page-title-main">Horace King (architect)</span> American architect (1807–1885)

Horace King was an African-American architect, engineer, and bridge builder. King is considered the most respected bridge builder of the 19th century Deep South, constructing dozens of bridges in Alabama, Georgia, and Mississippi. King was born into slavery on a South Carolina plantation in 1807. A slave trader sold him to a man who saw something special in Horace King. His enslaver, John Godwin, taught King to read and write as well as how to build at a time when it was illegal to teach enslaved people. King worked hard, and despite bondage, racial prejudice, and many obstacles, he focused on working hard and being a genuinely good man. King built bridges, warehouses, homes, and churches. Horace King became a highly accomplished Master Builder and emerged from the Civil War as a legislator in the State of Alabama. Affectionately known as Horace "The Bridge Builder" King and the "Prince of Bridge Builders", he also served his community in many important civic capacities."

Girard, Alabama was a city in the far north-east corner of Russell County, Alabama across the Chattahoochee River from Columbus, Georgia.

<span class="mw-page-title-main">North Highlands Dam</span> Body of water in Georgia, united States

North Highlands Dam is a structure on the Chattahoochee River at the northern edge of the Columbus, Georgia, United States. It is approximately 4.2 miles (6.8 km) north of 9th Avenue in downtown Columbus. The dam was built in 1899 to provide power for the former Bibb City Mill. It was one of the first large dams constructed in the South. The North Highlands Dam was owned by the Columbus Electric and Power Company, until that utility was purchased by Georgia Power in 1930.

<span class="mw-page-title-main">City Mills Dam</span> Dam in Alabama, United States

City Mills Dam was a dam on the Chattahoochee River, between Downtown Columbus, Georgia, and Phenix City, Alabama. The dam was built in 1907 to power the City Mills grist mill. Previously, a wooden dam dating to 1828 had existed at the site. The dam impounded a 1.3-mile (2.1 km) run of the river reservoir of approximately 110 acres (0.45 km2).

<span class="mw-page-title-main">Eagle & Phenix Dam</span>

The Eagle and Phenix Dam was a stone dam on the Chattahoochee River, in downtown Columbus, Georgia. The dam was built in 1882 to power the Eagle and Phenix Textile Mill. It was located just south of the 13th Street Bridge connecting Columbus to Phenix City, Alabama. The dam produced a 45-acre (18 ha) run of the river reservoir that extended approximately 1 mile (1.6 km) upstream.

<span class="mw-page-title-main">River Place</span> United States historic place

The historic River Place is located in Detroit, Michigan, bounded by Joseph Campau Avenue, Wight Street, McDougall Street, and the Detroit International Riverfront. It was formerly the Parke-Davis and Company Pharmaceutical Plant. The complex was listed on the National Register of Historic Places in 1985.

<span class="mw-page-title-main">Chattahoochee RiverWalk</span> Walking and biking area in Columbus, Georgia, United States

The Chattahoochee RiverWalk is a 22-mile walking and biking area along the Chattahoochee River in Columbus, Georgia, United States. The trail is paved with asphalt, concrete, or brick. Due to the RiverWalk bike path, Columbus has been listed by the League of American Bicyclists as one of the forty most Bicycle Friendly Communities in the United States.

<span class="mw-page-title-main">Downtown Columbus, Georgia</span> Neighborhood in Columbus, Georgia, U.S.

Downtown Columbus, Georgia, also called "Uptown", is the central business district of the city of Columbus, Georgia. The commercial and governmental heart of the city has traditionally been toward the eastern end of Downtown Columbus, between 10th Street and 1st Avenue. Recent developments, particularly between Broadway and 2nd Avenue, have expanded the boundaries of the "central" part of the neighborhood. The term "Downtown Columbus" can also mean this smaller, more commercial area, particularly when used in the context of the city's nightlife and restaurants.

<span class="mw-page-title-main">Bennington Village Historic District</span> Historic district in New Hampshire, United States

The Bennington Village Historic District of Bennington, New Hampshire encompasses the 19th-century center of the village. Growth of the village followed a typical pattern for rural New Hampshire towns, based in this case around the growth in the early 19th century of the paper industry, which continues to be a significant economic force in the community. The district is centered on the junctions of Main, Center, and School Streets with Bible Hill Road and Francestown Road. The district was listed on the National Register of Historic Places in 2010.

<span class="mw-page-title-main">Hayward and Kibby Mill</span> United States historic place

The Hayward and Kibby Mill, also known as the Tunbridge Mill, is a historic industrial facility on Spring Road in Tunbridge, Vermont. It includes a substantially complete water-powered 19th-century grist mill dating back to 1820, with a later sawmill added about 1870. It is one of the few surviving water-powered mills in the state, and is believed to be the only one featuring both a sawmill and grist (grain) mill. It was listed on the National Register of Historic Places in 1992.

The following is a timeline of the history of the city of Columbus, Georgia, US.

<span class="mw-page-title-main">Thresher Mill</span> United States historic place

The Thresher Mill is a historic industrial facility on West Barnet Road in Barnet, Vermont. First developed in 1836, it was the last water-powered mill to operate on the Stevens River, lasting into the late 20th century. The property, which includes an original mill dam and a surviving 1872 mill building, as well as archaeological sites of other industrial buildings, was listed on the National Register of Historic Places in 1996. It is now styled Ben's Mill, and is a local museum.

St. Anthony Falls in Minneapolis, Minnesota, is the only natural falls on the Mississippi River. Since almost the beginning of settlement in the area by European descendants, the St. Anthony Falls have been used for waterpower. The first allowed settlers were at Ft. Snelling, where construction began in 1820. A sawmill was operating 1821 and a flour mill in 1823. As soon as the land at the sides of the falls became available it was purchased with the intent of using the waterpower of the falls. First lumber mills covered the falls, cutting lumber floated down the Mississippi. After 1870 flour mills started to dominate the area. From 1880 to 1930 the area was the number one flour producer in the US. In later years, some of the power came from steam, but in 1923 half of the waterpower used was for flour milling. Other industries have also used the waterpower.