Kyaukmyaung | |
---|---|
Town | |
Coordinates: 22°35′0″N95°57′0″E / 22.58333°N 95.95000°E | |
Country | Myanmar |
Division | Sagaing |
Population (2015) | 15,000 |
• Religions | Buddhism |
Time zone | UTC+6.30 (MST) |
Kyaukmyaung is a town in Sagaing Division, Myanmar. It is situated 46 miles north of Mandalay on the west bank of the River Irrawaddy, and 17 miles east of Shwebo by road. [1] [2] It marks the end of the third defile of the Irrawaddy. [3]
Kyaukmyaung is a pottery village where the majority of the 15,000 residents who live there participate in the San Oh, or pottery, industry in some way. Kyaukmyaung is home to the only four large scale glaze factories in upper Myanmar. The largest is Nweyein. [4]
Ceramic traditions in this area were first started in the Ma-u and Ohn Bin villages in the 18th century when 5,000 Mon war captives were settled in the area by King Alaungpaya (1752–1760) after his conquest of Pegu. [5] Earlier, the Peguans from the south had rebelled and deposed the King of Ava. Aung Zeya (later Alaungpaya), chief of Moksobo (later Shwebo), led his countrymen in a revolt against the Mon, and collected a fleet at Kyaukmyaung where he defeated the advancing Mon. [6]
When the Japanese invaded Burma in 1942, the Irrawaddy Flotilla Company was ordered to scuttle their rivercraft at both Mandalay and Kyaukmyaung by the retreating British colonial government. [7] The river, about half a mile wide at this point, was crossed and bridgeheads established in January 1944 by the 19th Infantry Division (India) at both Kyaukmyaung and Thabeikkyin, when the Allied forces counter-attacked. [8] [9] In 1960 the village decided to relocate to their current location from Ohn Bin and Ma-u to Kyaukmyaung, which is approximately 6 miles away, because of a natural deposit of clay located at Kyaukmyaung.
Kyaukmyaung is famous for the manufacture of large glazed earthenware pots sometimes known as Kyaukmyaung pots. The majority of this village's economy stems from sending floating these pots downstream. Kyaukmyaung pots are thrown with 40 pounds of clay, and can hold 150 Vis (200 liters) of liquid.
Kyaukmyaung is home to four large scale pottery "villages" or complexes - Nwenyein, Shwegon, Shwedaik, and Malar. Nwenyein is the largest of the four and employs 52% of the population. Nwynyien employs people to do everything from harvesting the clay from the riverbed to bringing in firewood for the firing process. [4] The factory is located about 0.75 kilometers away from the bank of the stream. The complex has four very large wood kilns, two mixing stations that grind dry clay and two rooms for throwing (one for the very large San Oh pots, and the other for the smaller everyday use objects). There are two rooms for glazing, and three to five rooms for greenware.
Two kinds of clay are used, sourced from two specific places. One clay comes from the Irrawaddy riverbed, and is a red based earthenware clay that has a high copper content. The second is a yellow clay, which is cosmic and lime based, found at a deposit 2 kilometers away. The two types of clay are mixed together with ground dried clay bricks and then refined. After this process is complete the clay may be stored for up to two years, but is also ready to be used right away.
The throwing is done in two separate rooms, depending on the type of pot that is being made. Kyaukmyaung pots are thrown on a human operated wheel submerged in the ground. Throwing these very large pots often requires two or three men. One man keeps the wheel in motion by spinning it with his hands, and the other two work on throwing. This is a very laborious process because of the sheer size of these pots. A single pot is thrown with about 40 pounds of clay. Pots are thrown in two pieces and later combined. Clay is distributed to the wheel in a stretched out logs when the wheel is in motion. This varies from the traditionally western style of throwing, where the entirety of the clay being used for the section is placed on the wheel and centered afterward. This centering process is designed so that the height of these pots is dramatically increased. It also helps to reduce air bubbles from interfering with the throwing process. The bottom section of the pot is thrown first.
After a pot has been thrown it is left to dry to the leather-hard phase on the wheel. To prevent distortion in the drying process, throwers will often tie twine made from straw around the pot so it retains its circular shape. This is especially important to the stacking process.
The ceramicists then throw the top portion of the pot, which they throw upside down. They measure the needed circumference with twine made from straw. When the pot is finished they remove it with string, let it dry to leather hard, and then attach it to the bottom portion of the pot. They do so through the scratch and slip method, in which they rough up the edges of the two separate pieces of the pot that they would like to stick together. Then the ceramicists apply a finer more watered down version of the clay to the scratched area and fuse them together on the wheel where the bottom part of the pot has been drying. After this is complete, they use the wheel and clean up the extra slip and visible evidence of the fusion, and confirm that the pot is fully centered. After a little more drying, they remove the pot from the wheel and place it outside to dry. The pots are still bound in string so that they retain their shape. This drying process normally takes two full days in the dry season. After two days these pots are bone dry and ready to be fired.
Only men throw the Kyaukmyaung pots because they are so big that they require longer arms to reach the bottom, and that requires significant strength.
The more decorative and smaller types of pottery are thrown by women. They are generally thrown off the hump or a large block of clay that is centered and then used to throw three or four ceramic objects. Smaller bowls are made for plants or decorative water jars. These wheels are also man powered wheels and are spun by one woman kicking the wheel at a constant pace, and generally one woman operates this while the other does the throwing.
Traditionally the glazes that are used are mostly slipware or glazes formed from the purest and smallest particles found in the clay body. Two main glazes are applied to the pots. The first of these is a yellow glaze that is formed by adding chalk to the natural clay body. The glaze is an off-white before the firing and after turns into a warm yellow. The second glaze is made similarly, but instead of adding chalk, the villagers use burned batteries, and some compound in the batter ash turns the glaze black when fired.
In 1973 the glaze process started changing to meet more global standards. The most aggressive change was the use of glass powder based glazes instead of slip glazes. The glass powder is still sometimes mixed with the chalk and battery plate powder, but is often mixed with lead carbonate ore, carbon oxide and cobalt oxide to achieve many of the traditional glazes. In the 1990s Nwenyein started using various paints under the glass powder glaze for some of the decorative pottery.
Kyaungmyauk has four functional wood kilns. They are very large and insulated by bricks. They are overseen by the firing master, one of the most senior positions at the compound.
When thrown and let dry to a bone dry stage, the pots are loaded into a massive kiln. The kilns can hold up to 80 large pots and around 20 smaller pots that are often fired inside of the larger pots. They prevent the pots from sticking together by using ash.
When the pots are loaded into the kiln, wood gatherers bring in wood by the truckload for this firing. The wood comes from as far away as 60 kilometers, and is generally harder wood. The firing process differs from western firing because the fire master does not know the specific temperatures that they fire pots to. Instead, they measure how long to fire these pots for based on how many truckloads of wood they have to use and the duration. Although every wood kiln firing is different, they tend to fire for two days and use four truckloads of wood.
Since the 1990s, the large domestic demand for glaze wear has dramatically decreased. This is largely due to the fact that these pots last a very long time. This factor, along with the high cost of production, has caused most of the small scale factories to go out of business. Leaving behind the four factories that make up Kyaungmyauk pottery village, each of these factories follow a similar structure of being led by a single entrepreneur who oversees all of the production and coordination with wholesale vendors and stores in Yangon and father down the river. The wages vary based upon the level of skill of the workers, but skilled positions such as throwers are paid four U.S. dollars a day and wood gatherers $3 a day. All workers are allowed to take out a $500 loan from the owner every year to help them with their finances.
The Kyaukmyaung pots are sold for $18–$20 directly from the factory. The majority of the pots are floated downstream on giant boats. The pots in Yangon are often sold for anywhere between $40 and $50 US. The pots are sold to different retailers in Yangon and along the Irrawaddy river. They are very popular in Myanmar as they have many uses.
However, the market saw a significant decrease after 1990, because urban demand for glazed pottery decreased. In 2008 and 2009 the market saw a large boom in the wake of Cyclone Nargis.The cyclone destroyed many of the existing water storage systems, and UNICEF focused on water sources and hygiene as a response strategy. [10] As part of this, UNICEF contracted Kyaukmyaung to make the traditional pots to serve as temporary solutions to a lack of fresh water. This triggered a revival of the economy, as an increased demand allowed Kyaumyaung to sell the pots for more profit.
Kyaukmyaung pots are traditionally used for storing and fermenting food and drink items. The most common use is the fermentation of liquor. Other uses include storing and fermenting fish paste and chili paste. The smaller bowls are often used to store drinking water, grain, and rice. [4]
Kyaukmyaung is gathering fame as a tourist destination. More tour groups are stopping here as part of cruise ships on the Irrawaddy river cruises often stop here on their tours from Bagan to Mandalay. This has brought the town much tourism from Europe and America, and led to a creation of a shop where tourists can buy the ceramics. [11]
A 2004 survey of the Irrawaddy dolphin counted 18 to 20 between Kyaukmyaung and Mingun. In December 2005 the Department of Fisheries designated the 72 km stretch of the Irrawaddy between these two points a protected area for the dolphins. [12] [13] [14]
A kiln is a thermally insulated chamber, a type of oven, that produces temperatures sufficient to complete some process, such as hardening, drying, or chemical changes. Kilns have been used for millennia to turn objects made from clay into pottery, tiles and bricks. Various industries use rotary kilns for pyroprocessing and to transform many other materials.
Pottery is the process and the products of forming vessels and other objects with clay and other raw materials, which are fired at high temperatures to give them a hard and durable form. The place where such wares are made by a potter is also called a pottery. The definition of pottery, used by the ASTM International, is "all fired ceramic wares that contain clay when formed, except technical, structural, and refractory products". End applications include tableware, decorative ware, sanitary ware, and in technology and industry such as electrical insulators and laboratory ware. In art history and archaeology, especially of ancient and prehistoric periods, pottery often means only vessels, and sculpted figurines of the same material are called terracottas.
Raku ware is a type of Japanese pottery traditionally used in Japanese tea ceremonies, most often in the form of chawan tea bowls. It is traditionally characterised by being hand-shaped rather than thrown, fairly porous vessels, which result from low firing temperatures, lead glazes and the removal of pieces from the kiln while still glowing hot. In the traditional Japanese process, the fired raku piece is removed from the hot kiln and is allowed to cool in the open air.
Pottery and porcelain is one of the oldest Japanese crafts and art forms, dating back to the Neolithic period. Types have included earthenware, pottery, stoneware, porcelain, and blue-and-white ware. Japan has an exceptionally long and successful history of ceramic production. Earthenwares were made as early as the Jōmon period, giving Japan one of the oldest ceramic traditions in the world. Japan is further distinguished by the unusual esteem that ceramics hold within its artistic tradition, owing to the enduring popularity of the tea ceremony. During the Azuchi-Momoyama period (1573–1603), kilns throughout Japan produced ceramics with unconventional designs. In the early Edo period, the production of porcelain commenced in the Hizen-Arita region of Kyushu, employing techniques imported from Korea. These porcelain works became known as Imari wares, named after the port of Imari from which they were exported to various markets, including Europe.
In pottery, a potter's wheel is a machine used in the shaping of clay into round ceramic ware. The wheel may also be used during the process of trimming excess clay from leather-hard dried ware that is stiff but malleable, and for applying incised decoration or rings of colour. Use of the potter's wheel became widespread throughout the Old World but was unknown in the Pre-Columbian New World, where pottery was handmade by methods that included coiling and beating.
Salt-glaze or salt glaze pottery is pottery, usually stoneware, with a ceramic glaze of glossy, translucent and slightly orange-peel-like texture which was formed by throwing common salt into the kiln during the higher temperature part of the firing process. Sodium from the salt reacts with silica in the clay body to form a glassy coating of sodium silicate. The glaze may be colourless or may be coloured various shades of brown, blue, or purple.
Burnishing is a form of pottery treatment in which the surface of the pot is polished, using a hard smooth surface such as a wooden or bone spatula, smooth stones, plastic, or even glass bulbs, while it still is in a leathery 'green' state, i.e., before firing.
Chinese ceramics are one of the most significant forms of Chinese art and ceramics globally. They range from construction materials such as bricks and tiles, to hand-built pottery vessels fired in bonfires or kilns, to the sophisticated Chinese porcelain wares made for the imperial court and for export.
Ash glazes are ceramic glazes made from the ash of various kinds of wood or straw. They have historically been important in East Asia, especially Chinese pottery, Korean pottery, and Japanese pottery. Many traditionalist East Asian potteries still use ash glazing, and it has seen a large revival in studio pottery in the West and East. Some potters like to achieve random effects by setting up the kiln so that ash created during firing falls onto the pots; this is called "natural" or "naturally occurring" ash glaze. Otherwise the ash is mixed with water, and often clay, and applied as a paste.
Paper clay is any clay body to which processed cellulose fiber has been added.
The Gladstone Pottery Museum is a working museum of a medium-sized coal-fired pottery, typical of those once common in the North Staffordshire area of England from the time of the Industrial Revolution in the 18th century to the mid 20th century. It is a grade II* listed building.
This is a list of pottery and ceramic terms.
Onggi (Korean: 옹기) is earthenware extensively used as tableware and storage containers in Korea. The term includes both unglazed earthenware, fired near 600 to 700°C, and pottery with a dark brown glaze fired at over 1100 °C. Onggi have been used continuously from prehistoric Korean states to the modern day; however, they primarily see use as traditional storage and ornaments today.
Ladi Kwali or Ladi Dosei Kwali, OON NNOM, MBE was a Nigerian potter, ceramicist and educator.
Ceramics in Mexico date back thousands of years before the Pre-Columbian period, when ceramic arts and pottery crafts developed with the first advanced civilizations and cultures of Mesoamerica. With one exception, pre-Hispanic wares were not glazed, but rather burnished and painted with colored fine clay slips. The potter's wheel was unknown as well; pieces were shaped by molding, coiling and other methods,
Iga ware is a style of Japanese pottery traditionally produced in Iga, Mie, former Iga Province, central Japan.
Ceramic art is art made from ceramic materials, including clay. It may take varied forms, including artistic pottery, including tableware, tiles, figurines and other sculpture. As one of the plastic arts, ceramic art is a visual art. While some ceramics are considered fine art, such as pottery or sculpture, most are considered to be decorative, industrial or applied art objects. Ceramic art can be created by one person or by a group, in a pottery or a ceramic factory with a group designing and manufacturing the artware.
Dick Lehman is an American ceramics artist based in Indiana. Dozens of articles and photos featuring his techniques and insights have appeared in periodicals and books on ceramic art since 1985, including 34 articles in U.S.-published Ceramics Monthly, the largest circulating magazine in the field, plus articles in 11 other international periodicals.
Pottery of Sri Lanka is one of the traditional small industries. The pottery industry is distributed almost throughout the country and it has a long history and a tradition.
Oregon Pottery Company was established in the United States at Buena Vista, Oregon, in 1866. The largest pottery business on the West Coast of the United States at the time, it produced stoneware jars, jugs, and sewer pipe between 1866 and 1897 in Buena Vista and Portland, Oregon.