Landing Craft Support

Last updated
USS LCS(L) 102.jpg
Ex-LCS(L)-102 (HTMS Nakha)
Class overview
Builders George Lawley & Son, Commercial Iron Works and Albina Engine Works
Preceded by LCI(G)
In commission1944-2007
Completed130
Lost5
Retired125
Preserved1
General characteristics
Displacement250 long tons (250 t)
Length158 ft 6 in (48.31 m)
Beam23 ft 3 in (7.09 m)
Draft5 ft 10 in (1.78 m) (aft, loaded)
Propulsion
  • 8 × Gray Marine diesel engines
  • 1,600 hp (1,200 kW), twin screws
Speed16.5 knots (30.6 km/h)
Range5,500 nmi (10,200 km)
Complement36 officers, 5568 men
Armament
  • 1 × 3"/50 caliber gun
  • 1 × twin 40 mm or single 40 mm bow gun;
  • 2 × twin 40 mm deck guns (one forward, one aft)
  • 4 × 20 mm cannons;
  • 4 × .50 cal (12.7 mm) machine guns
  • 10 × Mk7 rocket launchers
Armor10-lb. STS splinter shields

The Landing Craft, Support (Large) were two distinct classes of amphibious warfare vessels used by the United States Navy (USN) in the Pacific and the Royal Navy in World War II. The USN versions, which were later reclassified Landing Ship Support, Large, also performed radar picket duty and fire fighting.

Contents

US Navy Vessels

The original designation for the ships was LCS(L)(3), which stood for "Landing Craft Support (Large) Mark 3". In 1949 the class was reclassified to "Landing Ship Support, Large" (LSSL). The United States Navy had to have the designation LCS(L) because there was also a smaller class named LCL that were built mainly for rescue and smoke laying during amphibious operation. [1]

Design and manufacture

Builders progress photo of LCS(L)(3)-26, Commercial Iron Works, Portland Oregon, 21 July 1944. Commercial Iron Works progress photo - LCSL-26.jpg
Builders progress photo of LCS(L)(3)-26, Commercial Iron Works, Portland Oregon, 21 July 1944.

A total of 130 were made. Three different ship building yards did the construction: George Lawley & Son (Neponset, Massachusetts); Commercial Iron Works (Portland, Oregon); and Albina Engine Works (Portland, Oregon).

The hull was the same as the Landing Craft Infantry ships. They were 158 ft 6 in (48.31 m) long, displaced 250 long tons (250 t), 23 ft 3 in (7.09 m) wide and drew 5 ft 10 in (1.78 m) when fully loaded. The flat bottom and skegs between and on either side of the twin screws allowed the ships to safely beach. The anchor is at the stern of the ship so it can be used to help pull the ship off the beach if necessary. The twin variable pitch screws were each driven by a bank of four Grey Marine (later General Motors) diesel engines, with a total power for all eight engines of 1,600 horsepower (1,200 kW). These engines gave a maximum speed of 16.5 knots (30.6 km/h), but normally the ships sailed at 12 knots (22 km/h). The ships had a range of 5,500 nautical miles (10,200 km). Armour for the gun mounts, pilot house and conning tower was provided by 10 lb (4.5 kg) STS splinter shields. The ships had a smoke generator which was used to obscure landing craft approaching the beach.

LCS(L) vessels could be produced in as little as 10 days, and final fitting out would take a further few weeks. The ships also made very good fire fighting ships. A fire fighting manifold was fitted in front of the bow gun and two monitors with pumps fitted just forward of the aft gun.

Armament

The LCS(L)(3) ships provided more firepower per ton than any ship ever built for the USN. Three guns and ten rocket launchers comprised the main armament. The bow gun was a 3"/50 caliber gun, a single 40 mm gun or a twin 40 mm gun. The forward and aft deck guns were twin 40 mm guns. The ten Mark 7 rocket launchers were situated behind the bow gun and forward deck house. Four 20 mm cannons were also mounted.

Operations

A group of LSSLs awaiting transfer to the ROK Navy in 1952 LCS(L)s awaiting transfer.jpg
A group of LSSLs awaiting transfer to the ROK Navy in 1952

The Battle of Tarawa showed a gap in Navy resources for close in support of landing troops. The time interval between the end of shelling from the large ships and the arrival of the landing craft on the beach allowed the defenders to regroup. The Landing Craft Support was designed to fill this void.

The first Landing Craft Support ships arrived in the Pacific Theater in time for the landings at Iwo Jima.

After providing close in support during the landings at Okinawa, many Landing Craft Support ships were placed on the radar picket stations as anti-aircraft platforms. When not on a picket stations, the ship would create smoke to hide the fleet at anchor and perform "skunk patrol" screening for suicide boats.

In the Borneo Campaign, Landing Craft Support was used in landings in Tarakan and Balikpapan.

During World War II, five LCS(L)(3)s were sunk in combat (see below) and 21 were damaged. Three of these small warships received the Presidential Unit Citation, while six were awarded Navy Unit citations. Importantly, Lieutenant Richard M. McCool, skipper of USS LCS(L)(3) 122, was awarded the Medal of Honor.

LCS(L)(3)-7, LCS(L)(3)-26 and LCS(L)(3)-49 were sunk by suicide boats off Mariveles, Corregidor Channel, Luzon, Philippine Islands, on 16 February 1945. LCS(L)(3)-15 was sunk by kamikaze aircraft off Okinawa, Ryukyu Islands, on 22 April 1945. LCS(L)(3)-33 was sunk by a kamikaze on 12 April 1945 at RP position No1. <NHHC , Action Report)ref></ref>

Post war

At the end of the war, surviving ships returned to the United States. Some were restored to action for the Korean War. Many were transferred to Japan (three were later transferred to Taiwan [2] ), France (and on to South Vietnam), Cambodia, Thailand, Greece, and other nations.

Only two ships are known to still exist. One has been highly modified as a fishing boat. The second was in Thailand and was kept in very similar configuration to its original (HTMS Nakha, formerly USS LCS(L)-102). The National Association of USS LCS(L) 1130 was successful in having HTMS Nakha transferred to the association for public display in the United States. She was officially released from the Royal Thai Navy on November 10, 2007 after being returned to the US in September of that year. As of May 2017 USS LCS(L)-102 is under restoration and upkeep. It is open to the public on Tuesdays, Thursdays and Saturdays or by special arrangements, and tours at the former Naval Ship yard, Mare Island, in Vallejo, California. [3]

British LCS vessels

The British designed, built and operated ten Fairmile Type H LCS vessels. Three of these were sunk in action. [4]

See also

Related Research Articles

The United States Navy, United States Coast Guard, and United States National Oceanic and Atmospheric Administration (NOAA) use a hull classification symbol to identify their ships by type and by individual ship within a type. The system is analogous to the pennant number system that the Royal Navy and other European and Commonwealth navies use.

<span class="mw-page-title-main">Landing craft</span> Seagoing watercraft

Landing craft are small and medium seagoing watercraft, such as boats and barges, used to convey a landing force from the sea to the shore during an amphibious assault. The term excludes landing ships, which are larger. Production of landing craft peaked during World War II, with a significant number of different designs produced in large quantities by the United Kingdom and United States.

Landing Ship, Tank Amphibious assault ship of World War II

Landing Ship, Tank (LST), or tank landing ship, is the naval designation for ships first developed during World War II (1939–1945) to support amphibious operations by carrying tanks, vehicles, cargo, and landing troops directly onto a low slope beach with no docks or piers. The shallow draft and bow doors and ramps enabled amphibious assaults on almost any beach. The LST had a highly specialized design that enabled ocean crossings as well as shore groundings. The bow had a large door that could open, deploy a ramp and unload vehicles. The LST had a flat keel that allowed the ship to be beached and stay upright. The twin propellers and rudders had protection from grounding. The LSTs served across the globe during World War II including in the Pacific War and in the European theatre.

The names of commissioned ships of the United States Navy all start with USS, for United States Ship. Non-commissioned, primarily civilian-crewed vessels of the U.S. Navy under the Military Sealift Command have names that begin with USNS, standing for United States Naval Ship. A letter-based hull classification symbol is used to designate a vessel's type. The names of ships are selected by the Secretary of the Navy. The names are those of states, cities, towns, important persons, important locations, famous battles, fish, and ideals. Usually, different types of ships have names originated from different types of sources.

<span class="mw-page-title-main">Motor gunboat</span> British Second World War small high-speed military vessel

The motor gun boat (MGB) was a small, high-speed British military vessel of the Second World War, which was armed with a mix of guns, in contrast to the physically similar motor torpedo boat (MTB), whose main offensive weapon were torpedoes. The small size of the MGBs, and their high speed, made them difficult targets for German E-boats, though, like their opponents, they were limited by heavy weather, because they did not provide a stable-enough platform to aim the guns. The large number of guns meant the crew was relatively large, numbering as high as thirty men on the largest boats.

Landing Craft Infantry Type of landing craft used by the Allies during World War II

The Landing Craft Infantry (LCI) were several classes of landing craft used by the Allies to land large numbers of infantry directly onto beaches during World War II. They were developed in response to a British request for seagoing amphibious assault ships capable of carrying and landing substantially more troops than their smaller Landing Craft Assault (LCA). The result was a small steel ship that could land 200 men, traveling from rear bases on its own bottom at a speed of up to 15 knots.

Fairmile B motor launch WWII Royal Navy motor boat

The Fairmile B motor launch was a large class of motor launch built by British boatbuilder Fairmile Marine and others during the Second World War to meet the Royal Navy's coastal operation requirements.

<span class="mw-page-title-main">Coastal Forces of the Royal Navy</span> British Royal Navy unit

Coastal Forces was a division of the Royal Navy initially established during World War I, and then again in World War II under the command of Rear-Admiral, Coastal Forces. It remained active until the last minesweepers to wear the "HM Coastal Forces" cap tally were taken out of reserve in 1968. The division received more gallantry awards than any other branch of the Royal Navy during that period.

<span class="mw-page-title-main">Coastal Forces of the Royal Canadian Navy</span> Military unit

The Coastal Forces of the Royal Canadian Navy (RCN) was a specialized naval force of well-armed, small and fast motor launch (ML) and motor torpedo boat (MTB) flotillas, primarily manned by members of the Royal Canadian Naval Volunteer Reserve (RCNVR). Tasked with escort, coastal defence, anti-submarine, minesweeping and search and rescue duties, the Coastal Forces of the RCN contributed to securing Allied sea lines of communication off the coasts of Canada and Britain during the Second World War.

The Fairmile H Landing Craft were British landing craft of the Second World War. Initially designed for commando type raids from a base in Britain as a way of probing enemy defenses and tying down additional troops, some were converted into fire support vessels.

<span class="mw-page-title-main">Amphibious warfare ship</span> Ship used in amphibious warfare

An amphibious warfare ship is an amphibious vehicle warship employed to land and support ground forces, such as marines, on enemy territory during an amphibious assault.

LSM(R)-193 was an American Landing Ship Medium (Rocket) built in 1944, which provided naval gunfire and rocket support for US and Allied amphibious landings in World War II. It was laid down at Charleston Navy Yard and commissioned on 21 November 1944. It participated in the Battle of Okinawa as well as the run-up to the battle

USS <i>LCS(L)(3)-102</i>

USS LCS(L)(3)-102 is an LCS(L)(3)-1 Class Landing Craft Support ship built for the United States Navy during World War II. The vessel was completed near the end of the war and saw brief service during the Battle of Okinawa. After the war, LCS(L)(3)-102 served in China before being decommissioned in 1946 and then transferred to Japan in mid-1953. Serving under the name JDS Himawari, the vessel remained in Japan until mid-1966 when she was transferred to Thailand, becoming the HTMS Nakha. In 2007, after being retired, the ship was returned to the United States to become a museum ship.

<span class="mw-page-title-main">Albina Engine & Machine Works</span> Shipyard in Portland, Oregon, United States

Albina Engine & Machine Works was a shipyard along the Willamette River in Portland, Oregon, United States. It was located in the Albina area of Portland along N. River Street and N. Loring Street. Albina Engine & Machine Works was founded in 1904. The shipyard produced a number of freighters during World War I, but operated mainly as a repair yard during the 1920s and 1930s. The Albina yard expanded its workforce and production during Portland's World War II shipbuilding boom. It specialized in producing subchasers, vessels designed to combat German U-boats. Albina Engine & Machine Works also built Landing Craft Support boats and cargo ships. Business declined in the post-war years, and Albina Engine & Machine Works was sold to the Dillingham Corporation around 1971.

Canadian Fairmile B Type of boat built by Canadian boatbuilders during the Second World War

The Canadian Fairmile B was a motor launch built during the Second World War for the Royal Canadian Navy. They were adaptations of the British Fairmile B motor launch design incorporating slight modifications for Canadian climatic and operational conditions. Eighty-eight were built in Canada for service with the Coastal Forces of the Royal Canadian Navy in home waters, of which eight were supplied to the United States Navy.

Landing Craft Gun

Landing Craft, Gun (LCG) is an umbrella term referring to two major types of British-built landing craft used extensively in World War II, present for the Normandy landings, the Allied invasion of Sicily, Operation Infatuate, and more. Their primary purpose was to provide direct fire against beach positions and surface attack for first-echelon landing waves. Secondary roles included engaging light surface vessels and escorting other landing craft.

<span class="mw-page-title-main">Wooden boats of World War II</span> United States wooden boats used in World War II

Splinter fleet or Splinter navy was a nickname given to the United States wooden boats used in World War II. The boats served in many different roles during the war. These boats were built in small boatyards on the West coast and East coast, Great Lakes and the Gulf of Mexico. They could be built quickly, in just 60 to 120 days. Most of the boats were built by boatyards that already had the tools and knowledge from building yachts, sailboats and motor boats. Many were built by craftsmen in family-owned small businesses. Under the Emergency Shipbuilding Program and War Shipping Administration contracts went out to over fifty boatyards across the country. The boats were built for the US Navy, the United States Army Air Forces, United States Coast Guard, and US Army. Some of the wooden boats went to Allied nations on the Lend-Lease program.

References

  1. "Rocket Boats Lay Smoke Screen For Landings. Popular Mechanics, February 1945, p. 28.
  2. "銅山港海戰人物群像 - 戰史專區 - 中華民國海軍". ROC Navy . 2017-07-12. Retrieved 2022-02-13.
  3. "Last WW II Landing Craft Support Ship Still Afloat in Vallejo, Calif". Contra Costa Times. Sep 11, 2013.
  4. Lambert, John and Ross, Al . Allied Coastal Forces of World War Two, Volume I : Fairmile designs and US Submarine Chasers. 1990. ISBN   978-0-85177-519-7.