Maumelle Ordnance Works Locomotive 1

Last updated
Maumelle Ordnance Works Locomotive 1
Maumelle Ordnance Works Locomotive 1, Right Side.JPG
Type and origin
References: [1] [2] [3] [4]
Power typeGasoline-mechanical
Builder Vulcan Iron Works (of Wilkes-Barre, Pennsylvania)
Serial number4364
Model35 ton
Build dateApril 1942
Specifications
Configuration:
   Whyte 0-4-0
   AAR B
   UIC B
Gauge 4 ft 8+12 in (1,435 mm)
Loco weight35 short tons (32 t)
Prime mover Hercules, gasoline
RPM range1800
Transmission4-speed constant mesh, via side rods
Career
OperatorsMaumelle Ordnance Works #1
US Army #8223 (c1945)
Augusta Railroad #7 (c1952)
Delivered1942
Last runc. 1958
Retired1958
Preserved1988
Current owner Fort Smith Trolley Museum
DispositionOn static display, based in Fort Smith, Arkansas
Maumelle Ordnance Works Locomotive #1
USA Arkansas location map.svg
Red pog.svg
Usa edcp location map.svg
Red pog.svg
Location100 S 4th St., Fort Smith, Arkansas
Coordinates 35°23′8″N94°25′50″W / 35.38556°N 94.43056°W / 35.38556; -94.43056
Arealess than one acre
Built1942
Architect Vulcan Iron Works (Wilkes-Barre)\Vulcan Iron Works
NRHP reference No. 06000835 [5]
Added to NRHPSeptember 20, 2006 [6]

Maumelle Ordnance Works Locomotive 1 is a gasoline-powered, mechanically driven, two-axle railway locomotive which was built in 1942 by Vulcan Iron Works (of Wilkes-Barre, Pennsylvania) for the United States War Department's Maumelle Ordnance Works. It was added to the U.S. National Register of Historic Places in 2006 [6] [7] and is preserved at the Fort Smith Trolley Museum. [3]

Contents

History

The Maumelle Ordnance Works were built by the War Department in 1941 to produce the explosives picric acid, ammonium picrate, and ammonium nitrate. The plant began production in 1942 and the locomotive was purchased to move freight cars around the facility, which was spread over 7,000 acres (2,800 ha) to minimize the risk of incidents spreading from one production unit to others. The plant stopped production in August 1945 and was decontaminated and shut down by November. The land passed through several hands and eventually became the planned community of Maumelle, Arkansas. [3]

The Arkansas nomination document says that locomotive #1 was then transferred to the Army, renumbered 8223, and sent to the Newport Army Air Field. [3] The airfield, however, had been renamed "Marine Corps Air Facility Newport" in 1944 and turned over to the City of Newport at the end of the war.

Wherever it spent the period after the war, in the early 1950s the government sold the locomotive to the Augusta Railroad, a 1.65-mile (2.66 km) line that connected Augusta, Arkansas, near Broadway and 1st Street, to the Missouri Pacific at 6th Street in New Augusta. [8] Parts of the railroad right of way are still obvious on the Google aerial view. The little gasoline locomotive replaced a 1924 Alco 2-6-0 steam locomotive that had been condemned. During the 1950s, the railroad gradually died, as its traffic shifted to trucks. The railroad went through an abandonment proceeding in 1958 and was purchased by Glenn Taggart and Bing Miller. Subsequently, Tommy Taggart bought Miller's interest. He kept the locomotive until he donated it to the Fort Smith Trolley Museum in June 1988. [3]

Design

The locomotive's controls Maumelle Ordnance Works Locomotive 1, Controls.JPG
The locomotive's controls

Locomotive #1 is an unusual combination. Virtually all internal combustion locomotives are diesel-electrics, powered by a diesel prime mover driving a generator which in turn drives one or more electric traction motors; apart from some diesel-mechanical and diesel-hydraulic locomotives. All of the major manufacturers had discarded the use of gasoline engines by the middle 1930s in favor of diesel, primarily on the grounds of fuel economy. Vulcan continued to produce a very limited number of both while it also continued to produce steam locomotives. In early 1942 it is likely that war needs made it easier to get a gasoline engine than a diesel because a gasoline engine uses much less material.

Electric drive is almost universal because a railroad locomotive is a difficult environment for a mechanical gearbox, as the loads vary widely from second to second as the slack action runs in and out. Only on very small locomotives, pulling a limited number of cars, generally on level track, have there been any successful gearbox locomotive drives. In the case of Locomotive 1, the four-speed gearbox drives a jackshaft under the cab which is connected with side rods to the two driving wheels. The choice of mechanical drive may also have been driven by war availability – a generator and traction motor take hundreds of pounds of copper, which was scarce.

The nomination document quotes a Vulcan ad in the 1947 Locomotive Cyclopedia, ""All Vulcan diesel and gasoline geared locomotives are equipped with a distinctive four-speed, constant-mesh, spur-geared transmission which permits easy gear changes at relatively high speeds. Gears and shafts are heat-treated nickel-chromium steel mounted on anti-friction bearings and operating in an oil bath. Extra-heavy cross-equalized semi-elliptic springs and Vulcan 3-point suspension assure easy riding on rough track and minimize derailments." [3]

It was added to the National Register of Historic Places in 2006. [6] [7]

Related Research Articles

<span class="mw-page-title-main">Locomotive</span> Self-propelled railway vehicle

A locomotive is a rail transport vehicle that provides the motive power for a train. If a locomotive is capable of carrying a payload, it is usually rather referred to as a multiple unit, motor coach, railcar or power car; the use of these self-propelled vehicles is increasingly common for passenger trains, but rare for freight trains.

<span class="mw-page-title-main">Climax locomotive</span> Type of geared steam locomotive

A Climax locomotive is a type of geared steam locomotive built by the Climax Manufacturing Company, of Corry, Pennsylvania. These had two steam cylinders attached to a transmission located under the center of the boiler, which sent power to driveshafts running to the front and rear trucks. Some 1,000-1,100 were built in three classes between 1888 and 1928.

<span class="mw-page-title-main">Plymouth Locomotive Works</span>

Plymouth Locomotive Works was a US builder of small railroad locomotives. All Plymouth locomotives were built in a plant in Plymouth, Ohio until 1997 when the company was purchased by Ohio Locomotive Crane and production moved to Bucyrus, Ohio in 1999. Production of locomotives has now ceased, and rights to the spare parts business have been sold to Williams Distribution.

<span class="mw-page-title-main">Diesel locomotive</span> Locomotive powered by a diesel engine

A diesel locomotive is a type of railway locomotive in which the power source is a diesel engine. Several types of diesel locomotives have been developed, differing mainly in the means by which mechanical power is conveyed to the driving wheels. The most common are diesel–electric locomotives and diesel–hydraulic.

<span class="mw-page-title-main">Diesel–electric powertrain</span> Propulsion system for vehicles

A diesel–electric transmission, or diesel–electric powertrain, is a transmission system powered by diesel engines for vehicles in road, rail, and marine transport. Diesel–electric transmission is similar to petrol–electric transmission, which is powered by petrol engines.

<span class="mw-page-title-main">St. Louis–San Francisco Railway</span> Former American railroad

The St. Louis–San Francisco Railway, commonly known as the "Frisco", was a railroad that operated in the Midwest and South Central United States from 1876 to November 21, 1980. At the end of 1970, it operated 4,547 miles (7,318 km) of road on 6,574 miles (10,580 km) of track, not including subsidiaries Quanah, Acme and Pacific Railway and the Alabama, Tennessee and Northern Railroad; that year, it reported 12,795 million ton-miles of revenue freight and no passengers. In 1980 it was purchased by and absorbed into the Burlington Northern Railroad. Despite its name, it never came close to San Francisco.

<span class="mw-page-title-main">GE 57-ton gas–electric boxcab</span> Railroad locomotive

Before diesel engines had been developed for locomotive power in the 1920s and 1930s, many companies chose to use the gasoline engine for rail motive power. The first GE Locomotive was a series of four-axle (B-B) boxcab gasoline–electric machines closely related to the "doodlebugs", self-propelled passenger cars built in the early Twentieth Century.

<span class="mw-page-title-main">Fluid coupling</span> Device used to transmit rotating mechanical power

A fluid coupling or hydraulic coupling is a hydrodynamic or 'hydrokinetic' device used to transmit rotating mechanical power. It has been used in automobile transmissions as an alternative to a mechanical clutch. It also has widespread application in marine and industrial machine drives, where variable speed operation and controlled start-up without shock loading of the power transmission system is essential.

<span class="mw-page-title-main">Jackshaft (locomotive)</span>

A jackshaft is an intermediate shaft used to transfer power from a powered shaft such as the output shaft of an engine or motor to driven shafts such as the drive axles of a locomotive. As applied to railroad locomotives in the 19th and 20th centuries, jackshafts were typically in line with the drive axles of locomotives and connected to them by side rods. In general, each drive axle on a locomotive is free to move about one inch (2.5 cm) vertically relative to the frame, with the locomotive weight carried on springs. This means that if the engine, motor or transmission is rigidly attached to the locomotive frame, it cannot be rigidly connected to the axle. This problem can be solved by mounting the jackshaft on unsprung bearings and using side-rods or chain drives.

<span class="mw-page-title-main">British Rail 11001</span> Diesel-mechanical railway locomotive used in Great Britain

11001 was one of the first British Railways diesel locomotives, built in 1949 at British Railways' Ashford railway works. It was designed by Oliver Bulleid when he was Chief Mechanical Engineer of the Southern Railway. It was powered by a Paxman RPH Series 1 engine, capable of delivering 500 brake horsepower (370 kW) at 1,250 rpm. It was driven via a Vulcan-Sinclair fluid coupling to an SSS (synchro-self-shifting) Powerflow gearbox. The gearbox provided three forward and reverse gears in either high or low range, with top speed ranging from 5 mph (8 km/h) in 1st gear, low range up to 36 mph (58 km/h). It had a 0-6-0 wheel formation, driven by rods from a rear jackshaft on the final drive, and with Bulleid's favoured BFB wheels.

<span class="mw-page-title-main">British Rail 10100</span> Early diesel railroad locomotive prototype

British Railways 10100 was an unusual experimental diesel locomotive known informally as The Fell Diesel Locomotive. It was the joint production of Davey Paxman & Co, Shell Refining & Marketing Co and Lt-Col L. F. R. Fell, built for them by the London, Midland and Scottish Railway at Derby. Sir Harry Ricardo was also involved. By the time it emerged in 1950, nationalisation had taken place and it carried British Railways livery. The locomotive had six diesel engines, four of them used for traction. There were two auxiliary engines, both of which were 150 hp (110 kW) AEC 6-cylinder units, and these drove the pressure-chargers for the main engines and the purpose of this arrangement was to enable the main engines to deliver very high torque at low crankshaft speed.

<span class="mw-page-title-main">Fort Smith Trolley Museum</span>

The Fort Smith Trolley Museum is a streetcar and railroad museum in Fort Smith, in the U.S. state of Arkansas, which includes an operating heritage streetcar line. The museum opened in 1985, and operation of its streetcar line began in 1991. Four vehicles in its collection, a streetcar and three steam locomotives, are listed on the National Register of Historic Places (NRHP). The now approximately three-quarters-mile-long (1.2 km) streetcar line also passes four NRHP-listed sites, including the Fort Smith National Historic Site, the Fort Smith National Cemetery, the West Garrison Avenue Historic District and the 1907 Atkinson-Williams Warehouse Building, which now houses the Fort Smith Museum of History.

<span class="mw-page-title-main">GE 45-ton switcher</span> 4-axle diesel locomotive

The GE 45-ton switcher is a 4-axle diesel locomotive built by General Electric between 1940 and 1956.

<span class="mw-page-title-main">St. Louis–San Francisco 4018</span> Preserved American 2-8-2 locomotive

St. Louis–San Francisco 4018 is a class USRA Light 2-8-2 "Mikado" steam locomotive which operated for three decades hauling freight between Bessemer and Birmingham, Alabama, on the St. Louis–San Francisco Railway. It went on display at the Alabama State Fairgrounds in 1952 and is one of only a few locomotives of its type that survive.

<span class="mw-page-title-main">St. Louis–San Francisco 4003</span> Preserved American 2-8-2 locomotive

St. Louis–San Francisco 4003 is a 2-8-2, Mikado type, standard gauge steam railway locomotive built by the American Locomotive Company in 1919 as a standard USRA Light Mikado for the Pennsylvania Railroad. The PRR, for unknown reasons, rejected 33 of 38 locomotives in the order. The United States Railroad Administration reassigned 23 of them to the St. Louis–San Francisco Railway (SLSF), also known as the "Frisco". The Frisco also received 10 sisters from the Indiana Harbor Belt Railroad, making 33 in all. The locomotive is now on display at the Fort Smith Trolley Museum in Fort Smith, Arkansas.

<span class="mw-page-title-main">United States Air Force Locomotive No. 1246</span>

The United States Air Force Locomotive No. 1246 is a historic diesel-electric railroad switch locomotive on display at the Fort Smith Trolley Museum in Fort Smith, Arkansas. It was manufactured in 1953 by the General Electric Company in Schenectady, New York, in fulfillment of a contract with the United States Air Force for eleven of its 44-ton locomotives. It is believed to have spent all of its productive life at Grissom Air Force Base in Indiana, and was acquired by the museum in 1992.

<span class="mw-page-title-main">Maumelle Ordnance Works Bunker No. 4</span> United States historic place

The Maumelle Ordnance Works Bunker No. 4 is a historic munitions storage facility at 4 Willastein Drive in Maumelle, Arkansas. It is a concrete structure, 61 by 27 feet, with a rounded roof and ventilation stack. It is covered with earth, with a trapezoidal concrete side wall exposed, which has a steel door at its center. The bunker was built in 1941–42 to store the explosives picric acid and ammonium picrate for use during World War II. Of 21 built in Maumelle, all but three have been demolished, and this is the only one that is entirely intact.

<span class="mw-page-title-main">Internal combustion locomotive</span> Railway locomotive that produces its pulling power through an internal combustion engine

An internal combustion locomotive is a type of railway locomotive that produces its pulling power using an internal combustion engine. These locomotives are fuelled by burning fossil fuels, most commonly oil or gasoline, to produce rotational power which is transmitted to the locomotive's driving wheels by various direct or indirect transmission mechanisms. The fuel is carried on the locomotive.

<span class="mw-page-title-main">GE 25-ton switcher</span> Type of switcher locomotive produced by General Electric

The GE 25-ton switcher is a model of diesel-electric switcher locomotive that was produced by GE Transportation at their Erie, Pennsylvania, facility between 1941 and 1974. Most examples were produced for industrial customers or the United States Armed Forces, although a number of examples were purchased by freight railroads as well. The majority of production was for customers in the United States and Canada, but export models were produced for buyers on five continents. Production totaled approximately 550 units over 33 years, making it one of the most widely produced switchers in American history.

<span class="mw-page-title-main">Vulcan Iron Works (Wilkes-Barre)</span> Former American locomotive manufacturer

The Vulcan Iron Works, based in Wilkes-Barre, Pennsylvania, manufactured railroad locomotives such as those shown in the illustration. The company was established in 1849 by Richard Jones. It built locomotives such as the preserved Berlin Mills Railway 7 (1911), and by 1944 was constructing both steam and diesel locomotives, as illustrated (right). The company ceased operation in 1954, and its assets were acquired by General Industrial Locomotive Corp.

References

  1. C.B. Peck (ed.). 1950-52 Locomotive Cyclopedia of American Practice. New York: Simmons-Boardman. pp. 200–1.
  2. Pinkepank, Jerry A. (1973). The Second Diesel Spotter's Guide. Kalmbach. pp. 405–6.
  3. 1 2 3 4 5 6 "Maumelle Ordnance Works Locomotive #1, Fort Smith, Sebastian County". Arkansas Historic Preservation Program (an agency of the state government's Department of Arkansas Heritage). 2006. Archived from the original on October 29, 2013. Retrieved June 13, 2012.
  4. "Roster of Equipment: Locomotives". Fort Smith Trolley Museum. Archived from the original on September 18, 2009. Retrieved February 8, 2010.
  5. "National Register Information System". National Register of Historic Places . National Park Service. March 13, 2009.
  6. 1 2 3 "Weekly list of actions taken on properties: 9/18/06 through 9/22/06". National Park Service. September 29, 2006. Retrieved June 13, 2012.
  7. 1 2 "National Register of Historic Places: Search results for locomotives in Fort Smith, Sebastian County". Arkansas Historic Preservation Program (an agency of the state government's Department of Arkansas Heritage). 2012. Retrieved June 12, 2012.[ permanent dead link ]
  8. USGS Topographic quad, available through GPS Visualizer.