Methylcyclopentadienyl manganese tricarbonyl

Last updated
Methylcyclopentadienyl manganese tricarbonyl
Methylcyclopentadienyl-Manganese-Tricarbonyl Skeletal.svg
MMT-3D-balls.png
Names
IUPAC name
tricarbonyl(methyl-η5-cyclopentadienyl)manganese
Other names
MMT, CI-2, Combustion Improver-2, Manganese tricarbonylmethylcyclopentadienyl, 2-Methylcyclopentadienyl manganese tricarbonyl
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.031.957 OOjs UI icon edit-ltr-progressive.svg
EC Number
  • 235-166-5
PubChem CID
RTECS number
  • OP1450000
UNII
UN number 3281
  • InChI=1S/C6H7.3CO.Mn/c1-6-4-2-3-5-6;3*1-2;/h2-5H,1H3;;;;/q-1;;;;
    Key: IYSGJCJSRBFZSZ-UHFFFAOYSA-N
  • CC1=C[CH-]C=C1.[O+]#C[Mn-2](C#[O+])C#[O+]
Properties
C9H7MnO3
Molar mass 218.09 g/mol
Appearancepale yellow to dark orange liquid [1]
Odor faint, pleasant [1]
Density 1.38 g/cm3
Melting point −1 °C (30 °F; 272 K)
Boiling point 232 to 233 °C (450 to 451 °F; 505 to 506 K)
low[ vague ]
Solubility Hydrocarbons (petrol), ether, alcohol, THF
Vapor pressure 7 mmHg (100°C) [1]
Structure
Tetrahedral at Mn
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
Flammable, toxic
GHS labelling:
GHS-pictogram-skull.svg GHS-pictogram-pollu.svg
Danger
H301, H310, H315, H330, H372, H410
P260, P273, P280, P284, P301+P310, P302+P350
Flash point 110 °C; 230 °F; 383 K [1]
NIOSH (US health exposure limits):
PEL (Permissible)
C 5 mg/m3 [1]
REL (Recommended)
TWA 0.2 mg/m3 [skin] [1]
IDLH (Immediate danger)
N.D. [1]
Related compounds
Related compounds
 ferrocene
Mn2(CO)10
dicyclopentadiene
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Yes check.svgY  verify  (what is  Yes check.svgYX mark.svgN ?)

Methylcyclopentadienyl manganese tricarbonyl (MMT or MCMT) is an organomanganese compound with the formula (C5H4CH3)Mn(CO)3. Initially marketed as a supplement for use in leaded gasoline, MMT was later used in unleaded gasoline to increase the octane rating. Following the implementation of the Clean Air Act (United States) (CAA) in 1970, MMT continued to be used alongside tetraethyl lead (TEL) in the US as leaded gasoline was phased out (prior to TEL finally being banned from US gasoline in 1995), and was also used in unleaded gasoline until 1977. Ethyl Corporation obtained a waiver from the U.S. EPA (Environmental Protection Agency) in 1995, which allows the use of MMT in US unleaded gasoline (not including reformulated gasoline) at a treat rate equivalent to 8.3 mg Mn/L (manganese per liter). [2]

Contents

MMT has been used in Canadian gasoline since 1976 (and in numerous other countries for many years) at a concentration up to 8.3 mg Mn/L (though the importation and interprovincial trade of gasoline containing MMT was restricted briefly during the period 1997–1998) [3] [4] and was introduced into Australia in 2000. It has been sold under the tradenames HiTEC 3000, Cestoburn and Ecotane. [5] [6] MMT is also used in China. [7]

History of usage in the United States

Although initially marketed in 1958 as a smoke suppressant for gas turbines, MMT was further developed as an octane enhancer in 1974. When the United States Environmental Protection Agency (EPA) ordered the phase out of TEL in gasoline in 1973, new fuel additives were sought. TEL has been used in certain countries as an additive to increase the octane rating of automotive gasoline but has been phased out in all countries since July 2021. [8]

In 1977, the US Congress amended the CAA to require advance approval by the EPA for the continued use of fuel additives such as MMT, ethanol, ethyl tert-butyl ether (ETBE), etc. [9] The new CAA amendment required a "waiver" to allow use of fuel additives made of any elements other than carbon, hydrogen, oxygen (within certain limits) and nitrogen. [10] To obtain a waiver, the applicant was required to demonstrate that the fuel additive would not lead to a failure of vehicle emission control systems.

Ethyl Corporation applied to the US EPA for a waiver for MMT in both 1978 and 1981; in both cases the applications were denied because of stated concerns that MMT might damage catalytic converters and increase hydrocarbon emissions. In 1988, Ethyl began a new series of discussions with the EPA to determine a program for developing the necessary data to support a waiver application. In 1990, Ethyl filed its third waiver application prompting an extensive four-year review process. In 1993, the U.S. EPA determined that use of MMT at 8.3 mg Mn/L would not cause, or contribute to, vehicle emission control system failures. [11]

Despite that finding, the EPA ultimately denied the waiver request in 1994 due to uncertainty related to health concerns regarding manganese emissions from the use of MMT. [12]

As a result of this ruling, Ethyl initiated a legal action claiming that the EPA had exceeded its authority by denying the waiver on these grounds. This was upheld by the US Court of Appeals [13] and EPA subsequently granted a waiver which allows the use of MMT in US unleaded gasoline (not including reformulated gasoline) at a treat rate equivalent to 8.3 mg Mn/L.

Implementation of this alternative to TEL has been controversial. Manganese compounds have, in general, very low toxicity, but their combustion products still irreversibly foul catalytic converters. Opposition from automobile manufacturers and some areas of the scientific community has reportedly prompted oil companies to stop voluntarily the usage of MMT in some of their countries of operation. [14]

MMT is currently manufactured in the U.S. by the Afton Chemical Corporation, a subsidiary of New Market Corporation. [15] It is also produced and marketed as Cestoburn by Cestoil Chemical Inc. in Canada.

Structure and synthesis

MMT is manufactured by reduction of bis(methylcyclopentadienyl) manganese using triethylaluminium. The reduction is conducted under an atmosphere of carbon monoxide. The reaction is exothermic, and without proper cooling, can lead to catastrophic thermal runaway. [16]

MMT is a so-called half-sandwich complex, or more specifically a "piano-stool" complex (since the three CO ligands are like the legs of a stool). The manganese atom in MMT is coordinated with three carbonyl groups as well as to all five main carbon atoms of the methylcyclopentadienyl ring. These hydrophobic organic ligands make MMT highly lipophilic.

A variety of related complexes are known, including ferrocene, which has also been used as an additive to gasoline. Many derivatives of MMT are known. [17]

Safety

The human and environmental health impacts that may result from the use of MMT will be a function of exposure to either: (1) MMT in its original, unchanged, chemical form and/or (2) manganese combustion products emitted from vehicles operating on gasoline containing MMT as an octane improver.

Pre-combustion storage and handling

The general public has minimal direct exposure to MMT. As stated by the US EPA in their risk assessment on MMT, "except for accidental or occupational contacts, exposure to MMT itself was not thought likely to pose a significant risk to the general population." [18] Similarly, the Australian National Industrial Chemicals Notification and Assessment Scheme (NICNAS) stated that "[m]inimal public exposure to MMT is likely as a result of spills and splashes of LRP [lead replacement petrol] and aftermarket additives". [19]

The MMT dossier registered in the European Chemical Agency's webpage indicates that before combustion in gasoline, MMT is classified as an acute toxicant by the oral, dermal, and inhalation routes of exposure under the European Union's Classification, Labeling and Packaging Regulation (EC/1272/2008), implementing the Global Harmonized System (GHS) of Classification and Labeling. The US ATSDR (Agency for Toxic Substances and Disease Registry) notes that MMT is very unstable in light and degrades to a mixture of less harmful substances and inorganic manganese in less than 2 minutes. [20] [21] Therefore, human exposure to MMT prior to combustion in gasoline would not likely occur at significant levels.

The US OSHA (Occupational Health and Safety Administration) has not established a permissible exposure limit specifically for MMT. However, OSHA has set a permissible exposure limit at a ceiling of 5 mg/m3 for manganese and its compounds, while the National Institute for Occupational Safety and Health recommends workers not be exposed to more than 0.2 mg/m3, over an eight-hour time-weighted average. [22] In Europe, the MMT DNELs (Derived No Effect Level) for workers by the inhalation and dermal routes of exposure are 0.6 mg/m3 and 0.11 mg/kg-day, respectively. The MMT DNELs for the general population by the inhalation and dermal routes of exposure are 0.11 mg/m3 and 0.062 mg/kg-day, respectively.

Combustion products

In 1994 (reaffirmed in 1998, 2001 and 2010), Health Canada concluded that "airborne manganese resulting from the combustion of MMT in gasoline powered vehicles is not entering the Canadian environment in quantities or under conditions that may constitute a health risk" [23] and confirmed they were taking no action with respect to MMT. Similarly, the 2003 NICNAS report states that the airborne concentrations of manganese as a result of car emissions from vehicles using fuel containing MMT poses no health hazard.[ citation needed ]

The assessment conducted by NICNAS asserts that "[m]anganese, the principle degradation by-product from combustion of MMT, is naturally occurring and ubiquitous in the environment. It is an essential nutrient of plants and animals. Environmental exposure to Mn compounds will mostly arise through the gaseous phase. Eventually, these will deposit to land and waters. The emission of Mn into the environment from use of fuels containing MMT is unlikely to develop to levels of concern and therefore poses a low risk for terrestrial or aquatic environments."

Additional health studies, overseen by the US EPA, were conducted to explain the transport of manganese in the body. In studies published from 2007 through 2011, no significant health effects are anticipated from the use of MMT in gasoline. [24]

Overall combined risk assessment

Based on the low potential for the release of concentrated MMT (before its combustion in gasoline) under normal storage and use, as well as its rapid photo-degradation properties, it has been concluded in multiple technical and global regulatory assessments that significant impacts to human health or the environment from MMT use are not anticipated. NICNAS concluded that there is "low occupational risk associated with MMT" both "for workers involved in formulating and distributing LRP or aftermarket fuel additives and those involved in automotive maintenance". Further, they also concluded that there is a "low risk" to the public from the use of MMT.

Significant human or environmental exposures associated with manganese compounds (manganese phosphate, manganese sulfate and manganese dioxide) from the combustion of MMT are not expected. In Health Canada's risk assessment on the health implications of the manganese combustion products of MMT, it was concluded that manganese exposures from MMT use are unlikely to pose a risk to health for any sub-group of the population. NICNAS similarly concluded that chronic Mn exposures (from all sources combined) are unlikely to be significantly changed by the use of MMT as a fuel additive.

In 2013, a risk assessment on MMT was developed by ARCADIS Consulting and verified by an independent panel, according to the methodology provided by the European Commission in compliance with the requirements of the European Fuel Quality Directive (2009/30/EC). The conclusions of a risk assessment are that "for MMT and its transformation products, when MMT is used as a fuel additive in petrol, no significant human health or environmental concerns related to exposure to either MMT or its transformation [combustion] products (manganese phosphate, manganese sulfate and manganese tetroxide) were identified at use at levels up to 18 mg Mn/L. Depending on the regional needs and the vehicle emission control technology available, an MMT treat rate in the range of 8.3 mg Mn/L to 18 mg Mn/L is scientifically justified and may deliver both environmental and economic benefits without significant adverse effects." [25]

T2 Laboratories explosion and fire

On December 19, 2007 an explosion and fire occurred in the production of MMT in Florida, which killed four people and injured fourteen. [26]

See also

Related Research Articles

<span class="mw-page-title-main">Manganese</span> Chemical element, symbol Mn and atomic number 25

Manganese is a chemical element; it has symbol Mn and atomic number 25. It is a hard, brittle, silvery metal, often found in minerals in combination with iron. Manganese was first isolated in the 1770s. Manganese is a transition metal with a multifaceted array of industrial alloy uses, particularly in stainless steels. It improves strength, workability, and resistance to wear. Manganese oxide is used as an oxidising agent; as a rubber additive; and in glass making, fertilisers, and ceramics. Manganese sulfate can be used as a fungicide.

<span class="mw-page-title-main">Gasoline</span> Liquid fuel, also called Petrol, derived from petroleum

Gasoline or petrol is a petrochemical product characterized as a transparent, yellowish, and flammable liquid normally used as a fuel for spark-ignited internal combustion engines. When formulated as a fuel for engines, gasoline is chemically composed of organic compounds derived from the fractional distillation of petroleum and later chemically enhanced with gasoline additives. It is a high-volume profitable product produced in crude oil refineries.

<span class="mw-page-title-main">Tetraethyllead</span> Organolead compound

Tetraethyllead (commonly styled tetraethyl lead), abbreviated TEL, is an organolead compound with the formula Pb(C2H5)4. It was widely used as a fuel additive for much of the 20th century, first being mixed with gasoline beginning in the 1920s. This "leaded gasoline" had an increased octane rating that allowed engine compression to be raised substantially and in turn increased vehicle performance and fuel economy. TEL was first synthesised by German chemist Carl Jacob Löwig in 1853. American chemical engineer Thomas Midgley Jr., who was working for the U.S. corporation General Motors, was the first to discover its effectiveness as an antiknock agent in 1921, after spending several years attempting to find an additive that was both highly effective and inexpensive.

An octane rating, or octane number, is a standard measure of a fuel's ability to withstand compression in an internal combustion engine without undergoing pre-ignition. The higher the octane number, the more compression the fuel can withstand before detonating. Octane rating does not relate directly to the power output or the energy content of the fuel per unit mass or volume, but simply indicates gasoline's resistance to detonating under pressure without a spark.

<span class="mw-page-title-main">Avgas</span> Aviation fuel

Avgas is an aviation fuel used in aircraft with spark-ignited internal combustion engines. Avgas is distinguished from conventional gasoline (petrol) used in motor vehicles, which is termed mogas in an aviation context. Unlike motor gasoline, which has been formulated without lead since the 1970s to allow the use of catalytic converters for pollution reduction, the most commonly used grades of avgas still contain tetraethyl lead, a toxic lead containing additive used to increase octane rating and prevent engine knocking. There are ongoing efforts to reduce or eliminate the use of lead in aviation gasoline.

<span class="mw-page-title-main">Oil refinery</span> Facility that processes crude oil

An oil refinery or petroleum refinery is an industrial process plant where petroleum is transformed and refined into products such as gasoline (petrol), diesel fuel, asphalt base, fuel oils, heating oil, kerosene, liquefied petroleum gas and petroleum naphtha. Petrochemical feedstock like ethylene and propylene can also be produced directly by cracking crude oil without the need of using refined products of crude oil such as naphtha. The crude oil feedstock has typically been processed by an oil production plant. There is usually an oil depot at or near an oil refinery for the storage of incoming crude oil feedstock as well as bulk liquid products. In 2020, the total capacity of global refineries for crude oil was about 101.2 million barrels per day.

<span class="mw-page-title-main">Liquid fuel</span> Liquids that can be used to create energy

Liquid fuels are combustible or energy-generating molecules that can be harnessed to create mechanical energy, usually producing kinetic energy; they also must take the shape of their container. It is the fumes of liquid fuels that are flammable instead of the fluid. Most liquid fuels in widespread use are derived from fossil fuels; however, there are several types, such as hydrogen fuel, ethanol, and biodiesel, which are also categorized as a liquid fuel. Many liquid fuels play a primary role in transportation and the economy.

<span class="mw-page-title-main">Exhaust gas</span> Gases emitted as a result of fuel reactions in combustion engines

Exhaust gas or flue gas is emitted as a result of the combustion of fuels such as natural gas, gasoline (petrol), diesel fuel, fuel oil, biodiesel blends, or coal. According to the type of engine, it is discharged into the atmosphere through an exhaust pipe, flue gas stack, or propelling nozzle. It often disperses downwind in a pattern called an exhaust plume.

<span class="mw-page-title-main">Diesel exhaust</span> Gaseous exhaust produced by a diesel engine

Diesel exhaust is the gaseous exhaust produced by a diesel type of internal combustion engine, plus any contained particulates. Its composition may vary with the fuel type or rate of consumption, or speed of engine operation, and whether the engine is in an on-road vehicle, farm vehicle, locomotive, marine vessel, or stationary generator or other application.

Manganism or manganese poisoning is a toxic condition resulting from chronic exposure to manganese. It was first identified in 1837 by James Couper.

<span class="mw-page-title-main">Ethyl Corporation</span>

Ethyl Corporation is a fuel additive company headquartered in Richmond, Virginia, in the United States. The company is a distributor of fuel additives. Among other products, Ethyl Corporation distributes tetraethyl lead, an additive used to make leaded gasoline.

To oxygenate means to impregnate, combine, or supply something with oxygen, while oxygenates are hydrocarbons containing at least one oxygen atom that are used as fuel additives to promote complete combustion in fuel mixtures. Oxygenates can also be employed to reduce air pollution by reducing carbon monoxide production and soot particle size and compounds such as aromatic hydrocarbons, polyaromatic hydrocarbons, and nitrated polyaromatic hydrocarbons that are side-products caused by incomplete combustion.

An antiknock agent is a gasoline additive used to reduce engine knocking and increase the fuel's octane rating by raising the temperature and pressure at which auto-ignition occurs. The mixture known as gasoline or petrol, when used in high compression internal combustion engines, has a tendency to knock and/or to ignite early before the correctly timed spark occurs.

<span class="mw-page-title-main">Ethyl acrylate</span> Chemical compound

Ethyl acrylate is an organic compound with the formula CH2CHCO2CH2CH3. It is the ethyl ester of acrylic acid. It is a colourless liquid with a characteristic acrid odor. It is mainly produced for paints, textiles, and non-woven fibers. It is also a reagent in the synthesis of various pharmaceutical intermediates.

<span class="mw-page-title-main">Top Tier Detergent Gasoline</span> Petroleum product

Top Tier Detergent Gasoline and Top Tier Diesel Fuel are performance specifications and trademarks designed and supported by several automakers. BMW, General Motors, Fiat Chrysler Automobiles, Ford, Acura/Honda, Toyota, Volkswagen, Mercedes-Benz, Navistar, and Audi support the gasoline standard, while General Motors, Volkswagen, Detroit Diesel, and Navistar support the diesel standard. Top Tier fuels must maintain levels of detergent additives that are believed to result in a higher standard of engine cleanliness and performance as compared to the United States Environmental Protection Agency (EPA) requirement. In addition, Top Tier fuels may not contain metallic additives, which can harm the vehicle emission system and create pollutants. As of 2018, Top Tier Detergent Gasoline is available from 61 licensed retail brands, and Top Tier Diesel Fuel is available from 5 licensed retail brands.

MCMT may refer to:

N-Methylaniline (NMA) is an aniline derivative. It is an organic compound with the chemical formula C6H5NH(CH3). The substance is a colorless viscous liquid, Samples turn brown when exposed to air. The chemical is insoluble in water. It is used as a latent and coupling solvent and is also used as an intermediate for dyes, agrochemicals and other organic products manufacturing. NMA is toxic and exposure can cause damage to the central nervous system and can also cause liver and kidney failure.

<span class="mw-page-title-main">Robert A. Kehoe</span> American toxicologist and lead advocate

Robert Arthur Kehoe was an American toxicologist and a dominant figure in occupational health. Working on behalf of the lead industry, Kehoe was the most powerful medically-trained proponent for the use of tetraethyllead as an additive in gasoline.

<span class="mw-page-title-main">Manganese cycle</span> Biogeochemical cycle

The manganese cycle is the biogeochemical cycle of manganese through the atmosphere, hydrosphere, biosphere and lithosphere. There are bacteria that oxidise manganese to insoluble oxides, and others that reduce it to Mn2+ in order to use it.

References

  1. 1 2 3 4 5 6 7 NIOSH Pocket Guide to Chemical Hazards. "#0409". National Institute for Occupational Safety and Health (NIOSH).
  2. ↑ "60 FR 36414 - Fuels and Fuel Additives; Grant of Waiver Application".
  3. ↑ "Threat of NAFTA Case Kills Canada's MMT Ban: Challenge over gasoline additive could have cost Ottawa millions". The Globe and Mail. July 20, 1998.
  4. ↑ "MMT, A Risk Management Masquerade" (PDF).
  5. ↑ Frumkin, Howard; et al. (1997). "Manganese in the US Gas Supply". American Journal of Industrial Medicine. 31 (1): 107–115. doi:10.1002/(SICI)1097-0274(199701)31:1<107::AID-AJIM16>3.0.CO;2-6. PMID   8986262.
  6. ↑ Patterson, Steve (15 September 2009). "Report: Owners of Jacksonville's T2 Lab never knew risks of deadly explosion". The Florida Times-Union. Archived from the original on 1 December 2022. Retrieved 1 December 2022.
  7. ↑ Geng, Peng; Zhang, Hui (2015). "Combustion and emission characteristics of a direct-injection gasoline engine using the MMT fuel additive gasoline". Fuel. 144: 380–387. doi:10.1016/j.fuel.2014.12.064.
  8. ↑ "End of leaded fuel use a 'milestone for multilateralism'". UN News. 30 August 2021. Retrieved 5 March 2022.
  9. ↑ "42 USC § 7545 - Regulation of fuels".
  10. ↑ Definition of Substantially Similar.[ www.epa.gov/otaq/regs/fuels/additive/jan91.pdf][ www.epa.gov/otaq/regs/fuels/additive/july81.pdf ]
  11. ↑ 58 Fed. Reg. 64,761 (December 9, 1993)
  12. ↑ "Fuels and Fuel Additives;Waiver Decision/Circuit Court Remand".
  13. ↑ "Waiver Ruling". 13 January 1995. p. 1053.
  14. ↑ Di Girolamo, Marco; Brianti, Maura; Marchionna, Mario. "Octane Enhancers". Ullmann's Encyclopedia of Industrial Chemistry . Weinheim: Wiley-VCH. doi:10.1002/14356007.a18_037.pub3. ISBN   978-3527306732.
  15. ↑ "Afton Chemical Ltd".
  16. ↑ "T2 Laboratories Inc. Reactive Chemical Explosion". US Chemical Safety Board. USCSB. Retrieved 29 April 2016.
  17. ↑ Petz, W., "40 years of transition-metal thiocarbonyl chemistry and the related CSe and CTe compounds", Coordination Chemistry Reviews, 2008, volume 252, pp. 1689-1733.doi:10.1016/j.ccr.2007.12.011.
  18. ↑ Davis, J. M; Jarabek, A. M.; Mage, D. T.; Graham, J. A. (Feb 1998). "The EPA health risk assessment of methylcyclopentadienyl manganese tricarbonyl (MMT)". Risk Assessment. 18 (1): 57–70. doi:10.1111/j.1539-6924.1998.tb00916.x. PMID   9523444 . Retrieved 25 June 2023.
  19. ↑ "National Industrial Chemicals Notification and Assessment Scheme; Methylcyclopentadienyl Manganese Tricarbonyl June 2003" (PDF). Archived from the original (PDF) on 2015-03-27.
  20. ↑ Garrison, AW; et al. (1995). "Environmental fate of methylcyclopentadienyl manganese tricarbonyl". Environmental Toxicology and Chemistry. 14 (11): 1859–1864. doi:10.1002/etc.5620141107.
  21. ↑ Wallington, TJ (1999). "Atmospheric Chemistry of Methylcyclopentadienyl Manganese Tricarbonyl: Photolysis, Reaction with Hydroxyl Radicals and Ozone". Environmental Science & Technology. 33 (23): 4232–4238. Bibcode:1999EnST...33.4232W. doi:10.1021/es990350p.
  22. ↑ "NIOSH Pocket Guide to Chemical Hazards. Centers for Disease Control and Prevention. April 4, 2011. Retrieved November 19, 2013".
  23. ↑ "Petition to the Commissioner of the Environment and Sustainable Development, under section 22 of the Auditor General Act. July 2001". Archived from the original on 2017-06-14. Retrieved 2011-09-09.
  24. ↑ "Methylcyclopentadienyl Manganese Tricarbonyl (MMT) Alternative Tier 2 Health Effects Test Program, Docket EPA-HQ-OAR-2004-0074".
  25. ↑ conclusions of this risk assessment
  26. ↑ "Investigation Report Report: T2 Laboratories, Inc. Runaway Reaction" (PDF). www.csb.gov. United States Chemical Safety and Hazard Investigation Board. 15 September 2009. Retrieved 30 November 2022.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.