This article needs additional citations for verification .(October 2007) |
A pseudopod or pseudopodium (pl.: pseudopods or pseudopodia) is a temporary arm-like projection of a eukaryotic cell membrane that is emerged in the direction of movement. Filled with cytoplasm, pseudopodia primarily consist of actin filaments and may also contain microtubules and intermediate filaments. [1] [2] Pseudopods are used for motility and ingestion. They are often found in amoebas.
Different types of pseudopodia can be classified by their distinct appearances. [3] Lamellipodia are broad and thin. Filopodia are slender, thread-like, and are supported largely by microfilaments. Lobopodia are bulbous and amoebic. Reticulopodia are complex structures bearing individual pseudopodia which form irregular nets. Axopodia are the phagocytosis type with long, thin pseudopods supported by complex microtubule arrays enveloped with cytoplasm; they respond rapidly to physical contact. [4]
Generally, several pseudopodia arise from the surface of the body, (polypodial, for example, Amoeba proteus ), or a single pseudopod may form on the surface of the body (monopodial, such as Entamoeba histolytica ). [5]
Cells which make pseudopods are generally referred to as amoeboids . [6]
To move towards a target, the cell uses chemotaxis. It senses extracellular signalling molecules, chemoattractants (e.g. cAMP for Dictyostelium cells), [7] to extend pseudopodia at the membrane area facing the source of these molecules.
The chemoattractants bind to G protein-coupled receptors, which activate GTPases of the Rho family (e.g. Cdc42, Rac) via G proteins.
Rho GTPases are able to activate WASp which in turn activate Arp2/3 complex which serve as nucleation sites for actin polymerization. [8] The actin polymers then push the membrane as they grow, forming the pseudopod. The pseudopodium can then adhere to a surface via its adhesion proteins (e.g. integrins), and then pull the cell's body forward via contraction of an actin-myosin complex in the pseudopod. [9] [10] This type of locomotion is called amoeboid movement .
Rho GTPases can also activate phosphatidylinositol 3-kinase (PI3K) which recruit PIP3 to the membrane at the leading edge and detach the PIP3-degrading enzyme PTEN from the same area of the membrane. PIP3 then activate GTPases back via GEF stimulation. This serves as a feedback loop to amplify and maintain the presence of local GTPase at the leading edge. [8]
Otherwise, pseudopodia cannot grow on other sides of the membrane than the leading edge because myosin filaments prevent them to extend. These myosin filaments are induced by cyclic GMP in D. discoideum or Rho kinase in neutrophils for example. [8]
Different physical parameters were shown to regulate the length and time-scale of pseudopodia formation. For example, an increase in membrane tension inhibits actin assembly and protrusion formation. [11] It was demonstrated that the lowered negative surface charge on the inner surface of the plasma membrane generates protrusions via activation of the Ras-PI3K/AKT/mTOR signalling pathway. [12]
In the case there is no extracellular cue, all moving cells navigate in random directions, but they can keep the same direction for some time before turning. This feature allows cells to explore large areas for colonization or searching for a new extracellular cue.
In Dictyostelium cells, a pseudopodium can form either de novo as normal, or from an existing pseudopod, forming a Y-shaped pseudopodium.
The Y-shaped pseudopods are used by Dictyostelium to advance relatively straight forward by alternating between retraction of the left or right branch of the pseudopod. The de novo pseudopodia form at different sides than pre-existing ones, they are used by the cells to turn.
Y-shaped pseudopods are more frequent than de novo ones, which explain the preference of the cell to keep moving to the same direction. This persistence is modulated by PLA2 and cGMP signalling pathways. [7]
The functions of pseudopodia include locomotion and ingestion:
Pseudopods can be classified into several varieties according to the number of projections (monopodia and polypodia), and according to their appearance.
Some pseudopodial cells are able to use multiple types of pseudopodia depending on the situation. Most use a combination of lamellipodia and filopodia to migrate [14] (e.g. metastatic cancer cells). [15] Human foreskin fibroblasts can either use lamellipodia- or lobopodia-based migration in a 3D matrix depending on the matrix elasticity. [16]
Lamellipodia are broad and flat pseudopodia used in locomotion. [4] They are supported by microfilaments which form at the leading edge, creating a mesh-like internal network. [17]
Filopodia (or filose pseudopods) are slender and filiform with pointed ends, consisting mainly of ectoplasm. These formations are supported by microfilaments which, unlike the filaments of lamellipodia with their net-like actin, form loose bundles by cross-linking. This formation is partly due to bundling proteins such as fimbrins and fascins. [17] [18] Filopodia are observed in some animal cells: in part of Filosa (Rhizaria), in "Testaceafilosia", in Vampyrellidae and Pseudosporida (Rhizaria) and in Nucleariida (Opisthokonta). [4]
Lobopodia (or lobose pseudopods) are bulbous, short, and blunt in form. [19] These finger-like, tubular pseudopodia contain both ectoplasm and endoplasm. They can be found in different kind of cells, notably in Lobosa and other Amoebozoa and in some Heterolobosea (Excavata).
High-pressure lobopodia can also be found in human fibroblasts travelling through a complex network of 3D matrix (e.g. mammalian dermis, cell-derived matrix). Contrarily to other pseudopodia using the pressure exerted by actin polymerization on the membrane to extend, fibroblast lobopods use the nuclear piston mechanism consisting in pulling the nucleus via actomyosin contractility to push the cytoplasm that in turn push the membrane, leading to pseudopod formation. To occur, this lobopodia-based fibroblast migration needs nesprin 3, integrins, RhoA, ROCK and myosin II. Otherwise, lobopods are often accompanied with small lateral blebs forming along the side of the cell, probably due to the high intracellular pressure during lobopodia formation increasing the frequency of plasma membrane-cortex rupture. [20] [16] [21]
Reticulopodia (or reticulose pseudopods), [22] are complex formations in which individual pseudopods are merged and form irregular nets. The primary function of reticulopodia, also known as myxopodia, is food ingestion, with locomotion a secondary function. Reticulopods are typical of Foraminifera, Chlorarachnea, Gromia and Filoreta (Rhizaria). [4]
Axopodia (also known as actinopodia) are narrow pseudopodia containing complex arrays of microtubules enveloped by cytoplasm. Axopodia are mostly responsible for phagocytosis by rapidly retracting in response to physical contact. These pseudopodia are primarily food-collecting structures, but also provide a means of hydrological transportation via the expansion of their surface areas. They are observed in "Radiolaria" and "Heliozoa". [4]
The cytoskeleton is a complex, dynamic network of interlinking protein filaments present in the cytoplasm of all cells, including those of bacteria and archaea. In eukaryotes, it extends from the cell nucleus to the cell membrane and is composed of similar proteins in the various organisms. It is composed of three main components: microfilaments, intermediate filaments, and microtubules, and these are all capable of rapid growth or disassembly depending on the cell's requirements.
Cytokinesis is the part of the cell division process and part of mitosis during which the cytoplasm of a single eukaryotic cell divides into two daughter cells. Cytoplasmic division begins during or after the late stages of nuclear division in mitosis and meiosis. During cytokinesis the spindle apparatus partitions and transports duplicated chromatids into the cytoplasm of the separating daughter cells. It thereby ensures that chromosome number and complement are maintained from one generation to the next and that, except in special cases, the daughter cells will be functional copies of the parent cell. After the completion of the telophase and cytokinesis, each daughter cell enters the interphase of the cell cycle.
Cytoplasmic streaming, also called protoplasmic streaming and cyclosis, is the flow of the cytoplasm inside the cell, driven by forces from the cytoskeleton. It is likely that its function is, at least in part, to speed up the transport of molecules and organelles around the cell. It is usually observed in large plant and animal cells, greater than approximately 0.1 mm. In smaller cells, the diffusion of molecules is more rapid, but diffusion slows as the size of the cell increases, so larger cells may need cytoplasmic streaming for efficient function.
Cell migration is a central process in the development and maintenance of multicellular organisms. Tissue formation during embryonic development, wound healing and immune responses all require the orchestrated movement of cells in particular directions to specific locations. Cells often migrate in response to specific external signals, including chemical signals and mechanical signals. Errors during this process have serious consequences, including intellectual disability, vascular disease, tumor formation and metastasis. An understanding of the mechanism by which cells migrate may lead to the development of novel therapeutic strategies for controlling, for example, invasive tumour cells.
A growth cone is a large actin-supported extension of a developing or regenerating neurite seeking its synaptic target. It is the growth cone that drives axon growth. Their existence was originally proposed by Spanish histologist Santiago Ramón y Cajal based upon stationary images he observed under the microscope. He first described the growth cone based on fixed cells as "a concentration of protoplasm of conical form, endowed with amoeboid movements". Growth cones are situated on the tips of neurites, either dendrites or axons, of the nerve cell. The sensory, motor, integrative, and adaptive functions of growing axons and dendrites are all contained within this specialized structure.
The lamellipodium is a cytoskeletal protein actin projection on the leading edge of the cell. It contains a quasi-two-dimensional actin mesh; the whole structure propels the cell across a substrate. Within the lamellipodia are ribs of actin called microspikes, which, when they spread beyond the lamellipodium frontier, are called filopodia. The lamellipodium is born of actin nucleation in the plasma membrane of the cell and is the primary area of actin incorporation or microfilament formation of the cell.
Filopodia are slender cytoplasmic projections that extend beyond the leading edge of lamellipodia in migrating cells. Within the lamellipodium, actin ribs are known as microspikes, and when they extend beyond the lamellipodia, they're known as filopodia. They contain microfilaments cross-linked into bundles by actin-bundling proteins, such as fascin and fimbrin. Filopodia form focal adhesions with the substratum, linking them to the cell surface. Many types of migrating cells display filopodia, which are thought to be involved in both sensation of chemotropic cues, and resulting changes in directed locomotion.
Major sperm protein (MSP) is a nematode specific small protein of 126 amino acids with a molecular weight of 14 kDa. It is the key player in the motility machinery of nematodes that propels the crawling movement/motility of nematode sperm. It is the most abundant protein present in nematode sperm, comprising 15% of the total protein and more than 40% of the soluble protein. MSP is exclusively synthesized in spermatocytes of the nematodes. The MSP has two main functions in the reproduction of the helminthes: i) as cytosolic component it is responsible for the crawling movement of the mature sperm, and ii) once released, it acts as hormone on the female germ cells, where it triggers oocyte maturation and stimulates the oviduct wall to contract to bring the oocytes into position for fertilization. MSP has first been identified in Caenorhabditis elegans.
In cell biology, a bleb is a bulge of the plasma membrane of a cell, characterized by a spherical, "blister-like", bulky morphology. It is characterized by the decoupling of the cytoskeleton from the plasma membrane, degrading the internal structure of the cell, allowing the flexibility required for the cell to separate into individual bulges or pockets of the intercellular matrix. Most commonly, blebs are seen in apoptosis but are also seen in other non-apoptotic functions, including apocrine secretion. Blebbing, or zeiosis, is the formation of blebs.
The Rho family of GTPases is a family of small signaling G proteins, and is a subfamily of the Ras superfamily. The members of the Rho GTPase family have been shown to regulate many aspects of intracellular actin dynamics, and are found in all eukaryotic kingdoms, including yeasts and some plants. Three members of the family have been studied in detail: Cdc42, Rac1, and RhoA. All G proteins are "molecular switches", and Rho proteins play a role in organelle development, cytoskeletal dynamics, cell movement, and other common cellular functions.
Cell division control protein 42 homolog is a protein that in humans is encoded by the CDC42 gene. Cdc42 is involved in regulation of the cell cycle. It was originally identified in S. cerevisiae (yeast) as a mediator of cell division, and is now known to influence a variety of signaling events and cellular processes in a variety of organisms from yeast to mammals.
Transforming protein RhoA, also known as Ras homolog family member A (RhoA), is a small GTPase protein in the Rho family of GTPases that in humans is encoded by the RHOA gene. While the effects of RhoA activity are not all well known, it is primarily associated with cytoskeleton regulation, mostly actin stress fibers formation and actomyosin contractility. It acts upon several effectors. Among them, ROCK1 and DIAPH1 are the best described. RhoA, and the other Rho GTPases, are part of a larger family of related proteins known as the Ras superfamily, a family of proteins involved in the regulation and timing of cell division. RhoA is one of the oldest Rho GTPases, with homologues present in the genomes since 1.5 billion years. As a consequence, RhoA is somehow involved in many cellular processes which emerged throughout evolution. RhoA specifically is regarded as a prominent regulatory factor in other functions such as the regulation of cytoskeletal dynamics, transcription, cell cycle progression and cell transformation.
Stress fibers are contractile actin bundles found in non-muscle cells. They are composed of actin (microfilaments) and non-muscle myosin II (NMMII), and also contain various crosslinking proteins, such as α-actinin, to form a highly regulated actomyosin structure within non-muscle cells. Stress fibers have been shown to play an important role in cellular contractility, providing force for a number of functions such as cell adhesion, migration and morphogenesis.
Rif is a small signaling G protein, and is a member of the Rho family of GTPases. It is primarily active in the brain and plays a physiological role in the formation of neuronal dendritic spine. This process is regulated by FARP1, a type of activator for RhoA GTPases. Alternatively, Rif can induce the formation of actin stress fibers in epithelial cells, which is dependent on the activity levels of ROCK proteins since the absence of ROCK activity would mean Rif would be unable to stimulate the growth of stress fibers.
Within molecular and cell biology membrane ruffling (also known as cell ruffling) is the formation of a motile cell surface that contains a meshwork of newly polymerized actin filaments. It can also be regarded as one of the earliest structural changes observed in the cell. The GTP-binding protein Rac is the regulator of this membrane ruffling. Changes in the Polyphosphoinositide metabolism and changes in Ca2+ level of the cell may also play an important role. A number of actin-binding and organizing proteins localize to membrane ruffles and potentially target to transducing molecules.
Amoeboid movement is the most typical mode of locomotion in adherent eukaryotic cells. It is a crawling-like type of movement accomplished by protrusion of cytoplasm of the cell involving the formation of pseudopodia ("false-feet") and posterior uropods. One or more pseudopodia may be produced at a time depending on the organism, but all amoeboid movement is characterized by the movement of organisms with an amorphous form that possess no set motility structures.
Rho-associated protein kinase (ROCK) is a kinase belonging to the AGC family of serine-threonine specific protein kinases. It is involved mainly in regulating the shape and movement of cells by acting on the cytoskeleton.
mDia1 is a member of the protein family called the formins and is a Rho effector. It is the mouse version of the diaphanous homolog 1 of Drosophila. mDia1 localizes to cells' mitotic spindle and midbody, plays a role in stress fiber and filopodia formation, phagocytosis, activation of serum response factor, formation of adherens junctions, and it can act as a transcription factor. mDia1 accelerates actin nucleation and elongation by interacting with barbed ends of actin filaments. The gene encoding mDia1 is located on Chromosome 18 of Mus musculus and named Diap1.
Uropods, in immunology, refer to the hind part of polarized cells during cell migration that stabilize and move the cell. Polarized leukocytes move using amoeboid cell migration mechanisms, with a small leading edge, main cell body, and posterior uropod protrusion. Cytoskeleton contraction and extension, controlled by various polarized signals, helps propel the cell body forward. Leukocyte polarization is an important requirement for migration, activation and apoptosis in the adaptive and innate immune systems; most leukocytes, including monocytes, granulocytes, and T and B lymphocytes migrate to and from primary and secondary lymphoid organs to tissues to initiate immune responses to pathogens.
An actin nucleation core is a protein trimer with three actin monomers. It is called a nucleation core because it leads to the energetically favorable elongation reaction once a tetramer is formed from a trimer. Actin protein dimers and trimers are energetically unfavorable. Actin nucleators like the Arp2/3 complex of proteins from the formin family are most frequently involved in this process. Actin nucleation factors start the polymerization of actin within cells.
{{cite web}}
: CS1 maint: unfit URL (link)