WASEDA-SAT-ZERO

Last updated

WASEDA-SAT-ZERO was a Japanese nanosatellite developed by Waseda University. The satellite did not use screws in its main structure (frame), a feature that was made possible by manufacturing it entirely through 3D printing. WASEDA-SAT-ZERO was launched on 12 October 2022 by an Epsilon rocket, but the launch resulted in a failure and the satellite was lost. [1]

Contents

Overview

WASEDA-SAT-ZERO was a 1U-sized CubeSat that was built from a chassis produced by a metal 3D printer, without any screws inside. By eliminating screws, the weight of the satellite can be reduced, and the risk of attached parts coming loose through vibrations can be avoided. Furthermore, by 3D printing a satellite, there will be less time needed to assemble it, and may shorten the satellite's development time. [2] According to Waseda University, this was the first CubeSat in the world to use a chassis manufactured by a metal 3D printer. [3] The inside of the 3D printed frames had a lattice structure to further save weight. [3]

Although WASEDA-SAT-ZERO was the fourth satellite built by Waseda University, it was named 'ZERO' to symbolize the fact that it does not have any screws in its main structure. [2]

Mission

While in orbit, WASEDA-SAT-ZERO would have deployed a plastic membrane. Images would have been displayed on the membrane, and the satellite would have taken measurements of them using an on board camera. The measurements made by the CubeSat would have been analyzed back on Earth. [2]

See also

Related Research Articles

RAIKO is a Japanese satellite which was built and operated by Tohoku and Wakayama Universities. A two-unit CubeSat, RAIKO was deployed from the International Space Station (ISS) on 4 October 2012, having been launched on 21 July 2012.

Waseda-SAT2 is a Japanese satellite which launched in May 2010. It is a student-built spacecraft, which will be operated by Waseda University, and is intended to be used for Earth observation and technology demonstration. It will test the use of extendible paddles to provide attitude control. The satellite is a single unit CubeSat.

Hayato, known before launch as KSAT, or the Kagoshima Satellite, is a Japanese satellite which was launched on 20 May 2010. It is a student-built spacecraft, which is operated by Kagoshima University, and is being used for technology demonstration and atmospheric research. The satellite is a single unit CubeSat, and carries equipment to study water vapour in the Earth's atmosphere, microwave imagery and spacecraft communication.

<span class="mw-page-title-main">Epsilon (rocket)</span> JAXA small-lift rocket family

The Epsilon Launch Vehicle, or Epsilon rocket, is a Japanese solid-fuel rocket designed to launch scientific satellites. It is a follow-on project to the larger and more expensive M-V rocket which was retired in 2006. The Japan Aerospace Exploration Agency (JAXA) began developing the Epsilon in 2007. It is capable of placing a 590 kg payload into Sun-synchronous orbit.

TRICOM-1R, also known as Tasuki, was a Japanese nanosatellite that was launched during the SS-520-5 sounding rocket test launch on 3 February 2018, with a mission to conduct store and forward data relay and Earth observation using a set of cameras.

The Tera-hertz Explorer (TEREX) mission is a planned orbiter and lander that will be carrying a terahertz sensor to the surface of Mars to measure the oxygen isotope ratios of various molecules in the Martian atmosphere. The objective of the mission is to understand the chain of chemical reactions that resupply the atmosphere with carbon dioxide.

HIBARI is a space mission by Japan for a microsatellite that would test a new attitude control (orientation) method to achieve high accuracy pointing for its small telescope, and was launched on 9 November 2021 by an Epsilon launch vehicle as part of the Innovative Satellite Technology Demonstration Program-2 mission. The key technology to be tested on HIBARI is called "Variable Shape Attitude Control" (VSAC), and it is based on reaction torque by rotating its four solar array paddles.

The Innovative Satellite Technology Demonstration Program is a series of spacecraft missions for testing technology and ideas put forward by universities and private companies. The program demonstrates various experimental devices and technology in space by providing flight opportunities. It is managed by the JAXA Research and Development Directorate. According to JAXA, the goal of this program is to test high risk, innovative technology that will lead to the space industry gaining competitiveness in the international field.

RAPIS-1 is a satellite launched on 18 January 2019 which for over a year was used to test seven technology demonstration projects. RAPIS-1 was developed and operated by Axelspace Corporation, under the coordination of the Japanese space agency JAXA.

OPUSAT-II was a CubeSat developed by Osaka Prefecture University and Muroran Institute of Technology. OPUSAT-II was launched from Wallops Flight Facility on 20 February 2021, and was deployed from the International Space Station. The satellite was nicknamed HIROGARI, for a Japanese word meaning spread, or expand.

RSP-01, nicknamed Selfie-sh was a nanosatellite developed by Ryman Sat Project. RSP-01 launched from Wallops Flight Facility on board a Cygnus spacecraft on 20 February 2021.

ASTERISC is a nanosatellite developed by the Planetary Exploration Research Center (PERC) at the Chiba Institute of Technology that will observe cosmic dust in low Earth orbit. It is built as 3U-sized CubeSat and will deploy a large membrane structure in space. ASTERISC was launched on 9 November 2021 by an Epsilon launch vehicle.

KOSEN-1 is a technology demonstration satellite that will test the deployment of an antenna for observing radio waves emitted from the planet Jupiter. It is a 2U CubeSat, and carries a 7 m (23 ft) antenna. The CubeSat was jointly developed by the National Institute of Technologies in Japan. National Institute of Technologies is known as 'kosen' in Japanese. KOSEN-1 was launched on 9 November 2021 by an Epsilon launch vehicle, as part of the Innovative Satellite Technology Demonstration-2 mission.

RAISE-2 is a smallsat for technology demonstration, part of the Japanese space agency JAXA's Innovative Satellite Technology Demonstration Program. RAISE-2 was launched on 9 November 2021 as the main satellite of Innovative Satellite Technology Demonstration-2. RAISE-2 was developed by Mitsubishi Electric.

NanoDragon is a 3U CubeSat built by the Vietnam National Satellite Center (VNSC). NanoDragon will use its automatic identification system (AIS) receiver to monitor vessels, and will also test the accuracy of its attitude control using an optical imager. It carries an advanced OBC developed by Japan's Meisei Electric.

KITSUNE is a nanosatellite developed by the HAK consortium, which consists of Haradaseiki Kogyo, Addnics Corporation, and Kyushu Institute of Technology (Kyutech). The spacecraft is a 6U CubeSat, and carries a high-resolution camera for Earth observation. KITSUNE was carried to the International Space Station (ISS) on board Cygnus NG-17, and was deployed from the ISS's Kibō Module on 24 March 2022 12:10 UTC. The deployment service of KITSUNE was provided by Mitsui Bussan Aerospace.

RAISE-3 is a smallsat for technology demonstration developed by Mitsubishi Heavy Industries (MHI). Part of the Japanese space agency JAXA's Innovative Satellite Technology Demonstration Program, RAISE-3 carried multiple technologies that were selected for in-orbit demonstration. RAISE-3 was launched on 12 October 2022 by an Epsilon rocket as the main satellite of Innovative Satellite Technology Demonstration-3, but the launch resulted in a failure and the satellite was lost.

MAGNARO was a technology demonstration satellite developed by Nagoya University. A nanosatellite built as a 3U-sized CubeSat, MAGNARO consisted of two satellites, MAGNARO-Tigris and MAGNARO-Piscis. MAGNARO aimed to demonstrate formation flight in space without using any thrusters or fuel. The two satellites would have tested the potential of using atmospheric perturbations to keep the distance between each other in orbit. MAGNARO was launched on 12 October 2022 by an Epsilon rocket, but the launch resulted in a failure and the satellite was lost.

Mitsuba was a nanosatellite developed by Kyushu Institute of Technology (Kyutech) which would have tested whether products that are not intended for use in space are still usable for satellites. Mitsuba was launched on 12 October 2022 by an Epsilon rocket, but the launch resulted in a failure and the satellite was lost.

KOSEN-2 is an educational nanosatellite jointly developed by eight schools of National Institute of Technology in Japan. The satellite would have tested IoT technologies in space. KOSEN-2 was launched on 12 October 2022 by an Epsilon rocket as part of the Innovative Satellite Technology Demonstration-3 mission, but the launch resulted in a failure and the satellite was lost.

References

  1. ↑ Navin, Joseph (11 October 2022). "JAXA Epsilon fails on sixth flight carrying RAISE-3 and others". NASASpaceFlight . Retrieved 12 October 2022.
  2. 1 2 3 "金属3Dプリンタで作った「ネジゼロ」衛星の実証を行う" (in Japanese). JAXA . Retrieved 2022-10-11.
  3. 1 2 Kobayashi, Yumi (April 30, 2020). "金属3Dプリンター製「ねじゼロ人工衛星」−−大学生と生み出すイノベーション". fabcross (in Japanese). Retrieved 2022-10-11.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.