White Grit

Last updated

Former Methodist chapel at White Grit. Chapel at White Grit - geograph.org.uk - 652401.jpg
Former Methodist chapel at White Grit.

White Grit is a small, scattered village beneath Corndon Hill in Powys, Wales, directly on the border with (and partly in) Shropshire. The nearby village of Priest Weston, despite being in England, actually lies to the west of White Grit. To the east is the A488 road. The nearest town is Bishop's Castle.

Contents

White Grit lies in the community of Church Stoke (the small parts in Shropshire are in the civil parishes of Chirbury with Brompton and Worthen with Shelve). Adjoining is a hamlet called The Marsh. There is a stone-built Methodist chapel in White Grit, no longer used as a place of worship, and a corrugated-iron chapel, both of which are marked on Ordnance Survey maps.

Etymology

A former mining village, it took its unusual name from the White Grit (or West Grit) Mine, [1] lead having been mined intermittently in the area since mediaeval times. [2] Its name is sometimes spelled "Gritt" with two letter "t"s.

Whetstones

A stone circle known as the Whetstones was located to the west of the village, but it was largely destroyed in the 19th century.

Mining at White Grit

A former mine engine house near White Grit. Mine engine house near White Grit - geograph.org.uk - 1564834.jpg
A former mine engine house near White Grit.

History

This mine was originally worked as a single sett but it was split into two separate entities for a period, [3] viz

Although a Roman pig of lead was found here in 1767, there is no other evidence of Roman working but references indicate that mining was being carried out in medieval times. Henry II laid down conditions governing the mining of lead in the Forest of Stiperstones and it is believed that the Grit Mine was working at this time. In 1181, Hugh Pantulf, High Sheriff of Shropshire accepted £55 from the King's lead mines at Shelve and Madoc ap Einion took out a five year lease on a Shelve lead mine at a cost of 40 marks. In 1182, a church in Amesbury, Gloucester paid 10 guineas for 34 loads of lead and had similar amounts again in 1184. Working since that time would have been intermittent and relatively shallow.

In 1760, John Lawrence created the Whitegritt Mining Company with some partners and took on the lease of Grit and Ladywell Mines. On 18 January 1783, Lawrence contacted Boulton & Watt on behalf of the Company and asked for the approximate costs of erecting an engine at the mine to lift water 60 yards up 13" diameter pipes. He also asked for an estimate of the daily coal consumption for such an engine. The shaft was stated to be only 12 yards below adit level (22 yards total depth) and it was proposed to use the engine to sink 60 yards. James Watt replied that the engine could either be a 371/2" at a cost of about £1,100 or, if the pumps were smaller, a 30" at a cost of about £900. His letter gave details of coal consumption and the premium to be paid to the partnership for use of their invention, i.e.

In February, Mr Joshua Blakeway, another of the mine adventurers, wrote to James Watt to say that they had discussed the engine and were apprehensive about the length of the stroke. They did not think that 6 ft was adequate and thought that 8 ft would suit them better. Watt was asked to give his opinion on such an engine, which was to be similar in all respects to the 30" erected at Bog Mine shortly before. They expected "1/4 more execution" from the engine due to the longer stroke and stated that the engine would not be expected to exceed 120 gallons per minute at first, although this would be increased with depth. Coal for the boilers would be of the best and largest, coming from one of the neighbouring collieries. The mine at that time was coping with water by using 2 horses, 6 hours at a time, to work a horse gin. The water was drawn in a 72-gallon barrel, which usually "lacked only 5 or 6 gallons", but at the time of writing the horses were having difficulty in keeping up with the water.

The sale was eventually approved and a long legal agreement drawn up between the two parties. There was also a short agreement covering the annual premium, viz "27th March 1783 Memorandum that Joshua Blakeway Esquire, John Lawrence Miner and Thomas Lloyd Anwyl, Gentleman, on behalf of themselves and the rest of a Company called and known by the Name and Description of the Whitegritt Company and Messrs Watt and Boulton Engineers agree as follows:

The said Messrs Watt and Boulton grant a license to the said company to erect a steam engine at the Whitegrit Mine with a cylinder of 30" in diameter which will effectively and properly work a pump of 101/2" in diameter, eight foot stroke and eight strokes/minute, to raise the water 60 yards and to consume only 136 lbs of coal per hour. The said company paying them the said Messrs Watt and Boulton £90 per year and that if the said engine shall by any accident that may happen thereto stand and not be worked for one month or more at any time they the said Messrs Watt and Boulton shall and will make to the said company an allowance of the above-mentioned sum or premium of £90 per year proportional to such space of time exceeding 30 days as the said engine shall stand without working at each such time of stopping. And they the said engineers also agree to send a proper person to the said mines to assist in putting the said engine together, the said company paying such person £1 6s 0d per week whilst he is employed by the said company. And they the said Joshua Blakeway, John Lawrence and Thomas Lloyd Anwyl on behalf of themselves and the rest of the said company agree to pay to the said Messrs Watt and Boulton for the considerations and subject to the allowances aforesaid the said sum or premium of £90 per year and also to the beforementioned proper person apportion the said sum of £1 6s 0d per week. In witness whereof the said parties have here unto signed their names the Day and Year above written. Witness Signed ..........John Scrymster

Boulton & Watt contracted out the manufacture of the cylinder to Bersham Foundry and sent a man named Law to supervise the erection of the engine. The job did not go smoothly, however, due to delays in delivery of essential parts and Lawrence complained about the financial loss to the company. On April 10, however, Lawrence wrote to Watt to inform him "that evening at about four o'clock we put the engine to work and mean to continue working it for some time". The former hoped that this would be for at least 3 months. In December, a further letter confirmed that the engine "goes very prosperously being steam and air tight but that the boiler is very bad". Watt was asked for his advice on a new boiler, it being proposed to use a round one, similar to the original, but with a tube through it.

In June 1785, Grit Mine was said to be worked out and so the engine was stopped. By the end of the year, the company offered to sell the engine to a mine at Logelas in Cardiganshire or anyone else that Boulton & Watt cared to recommend after a valuation. Lawrence confirmed that he would run the engine "in 10 or 12 days time to wash out the pumps". It was dismantled in May 1786 and taken to Shrewsbury, where it was last heard of on the quay awaiting transport to Popham & Partners. The site of this engine is now believed to be on what is known as Old Grit Shaft. The shaft is still open here but only two walls of the engine house are still standing. An engraving of the engine as envisaged by the Boulton & Watt draughtsmen in 1783 indicates that the building was tall and graceful.

The mine was acquired by Messrs Lewis & Phillips in 1825 and, despite several lawsuits being taken out by Lawrence the previous lessee, much development took place. It was during this period that several shafts were sunk, including New Engine and White Grit Shafts, an engine house being erected at the latter. White Grit Shaft has now collapsed and the engine house has suffered badly over the years, leaving only the lever wall and parts of two others standing to the west of the road.

Lewis & Phillips gave up the lease in 1848 and the sett was worked separately as East Grit and White Grit until 1860. In 1862, John Taylor & Company acquired the lease and drove exploratory levels from the old White Grit Shaft. His main effort was at East Grit, however, and he erected an engine on New Engine Shaft. This was undoubtedly used for both winding and pumping but no details are known about the engine. The most striking feature is the large slot in the north wall which housed the flywheel, the axle of which was inside the building. The pit on the east side housed the winding drum and the cylinder was mounted on the raised foundation in the centre of the building. New Engine Shaft has now collapsed and the lever wall of the engine house has fallen.

There are a number of other shafts on the sett and one of these to the south west is called Flat Rod Shaft. This seems to indicate that the shaft had pumps operated by flat rods from one of the engine houses, possibly the one at New Engine Shaft. There is another building at the mine which is worthy of examination and this is the small round powder house to the east of the road. It consists of two concentric circular stone walls with a roof which enclosed the whole. The outer wall has a door and the inner wall a serving hatch, allowing for one way movement of miners collecting explosives. The building is in an advanced state of decay and the drawing is a reconstruction. Although a pointed roof is shown, it is possible that it had a flat sloping roof.

Surface Remains

White (or West) Grit Engine Shaft is situated at the junction of the A488 with the road to Priest Weston. The shaft, which was sunk on the intersection of the Rider and Dingle Veins, is completely blocked but a reasonable amount of the engine house still remains. The tips have been completely removed for roadstone. The arched drainage level is in the wood to the south, it is almost silted up but still issuing water. There is a line of air shafts heading north-east, mostly collapsed. One is open and is 3 ft diameter with ginging, blocked at 10 ft depth. Another just to the east of the road has been filled but this is slipping.

Rider Vein can be followed east from White Grit towards the trees on the hilltop. Three blocked shafts without names are encountered before Blue Pit, situated in a large spoil tip. On the way up, the unique circular magazine is passed on the right. Blue Pit is filled but the vein can be followed further up the hill, past some opencast workings and a collapsed shaft, to Rider Shaft on the other side of the fence. This small square shaft is open and is situated in a large spoil tip, which bears a circular depression which may mark the position of a horse gin. Rider Shaft has been measured in the past as 200 ft to water, which suggests that Wood Level is backed up (calculated depth is 230 ft below Rider Shaft collar). It was descended in 1994 to a blockage (including a dead cow) at 130 ft. At 100 ft there is a level off the shaft but this has collapsed after 5 ft.

A short distance to the south is another unnamed shaft, now blocked, and a few yards to the north is an open stopehead. The latter was descended for 30 ft in 1994 into an excavated vein. There is a squeeze into Rider Shaft and workings heading west for 40 ft to a collapse. From Rider Shaft, the line of the vein can be followed to the remains of Old Grit engine house. The pumping shaft here is open but flooded a short distance down. The three other shafts in the area, including Foxhole Air Shaft to the north-west and Bye Pit to the south-west, are blocked. Excavation of the tips at Old Grit has revealed that they consist largely of boiler ash.

South-west of Old Grit there are dressing floors and the winding engine house of New Engine (or East Grit) Shaft. This led to workings on Engine Vein, which intersects Rider Vein at Rider Shaft, but the shaft is completely filled. The engine house is similar to the one at Ladywell in that the rear wall contains a slot, presumably for a flywheel to drive winding or dressing machinery. Near this are the remains of ore bins. The track from here can be followed back to the A488, near which it crosses over Dingle or Squilver Vein.

On the south side of the track, Dingle Shaft is completely blocked, though a large stream sinks in this area. Footway Shaft, just to the north of the track, is also blocked. On the brow of the hill, Hampsons Shaft is filled but Flat Rod Shaft is open to a rubbish infill at 60 ft. The next shaft encountered is Stone Shaft, now blocked, followed by an area of gruffy ground in which Gardens Shaft and Old Shaft are located. The last shaft, Gough's Shaft, is by the side of the road and is blocked.

Related Research Articles

William Murdoch Scottish engineer and inventor (1754-1839)

William Murdoch was a Scottish engineer and inventor.

Newcomen atmospheric engine Early engine invented by Thomas Newcomen.

The atmospheric engine was invented by Thomas Newcomen in 1712, and is often referred to simply as a Newcomen engine. The engine was operated by condensing steam drawn into the cylinder, thereby creating a partial vacuum which allowed the atmospheric pressure to push the piston into the cylinder. It was the first practical device to harness steam to produce mechanical work. Newcomen engines were used throughout Britain and Europe, principally to pump water out of mines. Hundreds were constructed through the 18th century.

Watt steam engine

The Watt steam engine, alternatively known as the Boulton and Watt steam engine, was an early steam engine and was one of the driving forces of the Industrial Revolution. James Watt developed the design sporadically from 1763 to 1775 with support from Matthew Boulton. Watt's design saved so much more fuel compared with earlier designs that they were licensed based on the amount of fuel they would save. Watt never ceased developing the steam engine, introducing double-acting designs and various systems for taking off rotary power. Watt's design became synonymous with steam engines, and it was many years before significantly new designs began to replace the basic Watt design.

Richard Trevithick British inventor and mining engineer (1771-1833)

Richard Trevithick was a British inventor and mining engineer from Cornwall, UK. The son of a mining captain, and born in the mining heartland of Cornwall, Trevithick was immersed in mining and engineering from an early age. He was an early pioneer of steam-powered road and rail transport, and his most significant contributions were the development of the first high-pressure steam engine and the first working railway steam locomotive. The world's first locomotive-hauled railway journey took place on 21 February 1804, when Trevithick's unnamed steam locomotive hauled a train along the tramway of the Penydarren Ironworks, in Merthyr Tydfil, Wales.

Beam engine An early configuration of steam engine utilising a rocking beam to connect major components.

A beam engine is a type of steam engine where a pivoted overhead beam is used to apply the force from a vertical piston to a vertical connecting rod. This configuration, with the engine directly driving a pump, was first used by Thomas Newcomen around 1705 to remove water from mines in Cornwall. The efficiency of the engines was improved by engineers including James Watt, who added a separate condenser; Jonathan Hornblower and Arthur Woolf, who compounded the cylinders; and William McNaught, who devised a method of compounding an existing engine. Beam engines were first used to pump water out of mines or into canals, but could be used to pump water to supplement the flow for a waterwheel powering a mill.

Cornish engine Type of steam beam engine originating in Cornwall

A Cornish engine is a type of steam engine developed in Cornwall, England, mainly for pumping water from a mine. It is a form of beam engine that uses steam at a higher pressure than the earlier engines designed by James Watt. The engines were also used for powering man engines to assist the underground miners' journeys to and from their working levels, for winching materials into and out of the mine, and for powering on-site ore stamping machinery.

The BCN Main Line, or Birmingham Canal Navigations Main Line describes the evolving route of the Birmingham Canal between Birmingham and Wolverhampton in England.

Parkfield Colliery, near Pucklechurch, South Gloucestershire, was sunk in 1851 under the ownership of Handel Cossham. Coal was reached in 1853. The shaft was 840ft deep, but only the upper series of coal veins were worked. These were the Hard, the Top, the Hollybush and Great veins. The quality of the coal mined was extremely good, and was used for gas manufacture and house coal.

Siston Hill Colliery

The sinking date for Siston Hill Colliery, Siston, Bristol is unknown, but was probably in the late 1790s or early 19th century. There is a surviving accident report dated 1804. This names the colliery owner as a Mrs. Peterson. By 1831 the colliery was under the ownership of Toghill & Company.

Donnington Wood Canal

The Donnington Wood Canal was a 5.5-mile (8.9 km) private canal in East Shropshire, England, which ran from coal pits owned by Earl Gower at Donnington Wood to Pave Lane on the Wolverhampton to Newport Turnpike Road. It was completed in about 1767 and abandoned in 1904. The canal was part of a larger network of tub-boat canals, which were used for the transport of raw materials, particularly coal, limestone and ironstone, from the locations where they were mined to furnaces where the iron ore was processed. The canal was connected to the Wombridge Canal and the Shropshire Canal.

Prestongrange Museum

Prestongrange Museum is an industrial heritage museum at Prestongrange between Musselburgh and Prestonpans on the B1348 on the East Lothian coast, Scotland. Founded as the original site of the National Mining Museum, its operation reverted to East Lothian Council Museum Service in 1992.

Chatterley Whitfield

Chatterley Whitfield Colliery is a disused coal mine on the outskirts of Chell, Staffordshire in Stoke on Trent, England. It was the largest mine working the North Staffordshire Coalfield and was the first colliery in the UK to produce one million tons of saleable coal in a year.

Shudehill Mill Cotton mill in Manchester, England

Shudehill Mill or Simpson's Mill was a very early cotton mill in Manchester city centre, England. It was built in 1782 by for Richard Arkwright and his partners and destroyed by fire in 1854. It was rebuilt and finally destroyed during the Manchester Blitz in 1940. One of Arkwright's larger mills, it was built three years before his patent lapsed. The mill had a 30 feet diameter water wheel and a Newcomen atmospheric engine was installed. Doubts remain as to why the engine was installed, whether it was a failed attempt to power a mill directly by steam or was modified to assist the wheel. It is possible that this engine, constructed by Hunt, could have been one of the 13 engines installed in Manchester mills by Joshua Wrigley. Water from the upper storage pond turned the water wheel to drive the mill. The steam engine recycled water from the lower storage pond to the upper storage pond. Three more Boulton and Watt engines were installed to power the increasing number of spindles.

Consolidated Mines

Consolidated Mines, also known as Great Consolidated mine, but most commonly called Consols or Great Consols was a metalliferous mine about a mile ESE of the village of St Day, Cornwall, England. Mainly active during the first half of the 19th century, its mining sett was about 600 yards north–south; and 2,700 yards east–west, to the east of Carharrack. Although always much troubled by underground water, the mine was at times highly profitable, and it was the largest single producer of copper ore in Cornwall. Today the mine is part of the Cornwall and West Devon Mining Landscape World Heritage Site.

Ding Dong mines Old mining area in Cornwall

The Ding Dong mines lie in an old and extensive mining area situated in the parish of Madron, in Penwith, Cornwall, England. They are about two miles north east of the St Just to Penzance road. They look out over Mount's Bay and St Michael's Mount to the south west. Since 2006 the site has been a UNESCO World Heritage Site, part of Cornwall and West Devon Mining Landscape.

Ingleton Coalfield

The Ingleton Coalfield is in North Yorkshire, close to its border with Lancashire in north-west England. Isolated from other coal-producing areas, it is one of the smallest coalfields in Great Britain.

Resolution was an early beam engine, installed between 1781–1782 at Coalbrookdale as a water-returning engine to power the blast furnaces and ironworks there. It was one of the last water-returning engines to be constructed, before the rotative beam engine made this type of engine obsolete.

Bowen Consolidated Colliery

Bowen Consolidated Colliery is a heritage-listed former mine at Station Street and Second Avenue, Scottville, Whitsunday Region, Queensland, Australia. It was established in 1919. It is also known as No. 1 Underground Mine and Bowen Consolidated Coal Company Colliery. It was added to the Queensland Heritage Register on 3 December 2009.

Wanlockhead beam engine

The Wanlockhead beam engine is located close to the Wanlock Water below Church Street on the B797 in the village of Wanlockhead, Parish of Sanquhar, Dumfries and Galloway, Scotland. The site is in the Lowther Hills above the Mennock Pass, a mile south of Leadhills in the Southern Uplands. This is the only remaining original water powered beam engine in the United Kingdom and still stands at its original location. It ceased working circa 1910 after installation circa 1870.

Old Millclose Mine

Old Millclose Mine was a lead mine near Wensley, in Derbyshire, England. The engine house of the mine survives as a ruin; it is a scheduled monument.

References

  1. Wales' window onto Shropshire, BBC Shropshire
  2. Grit Mine, Shropshire Mines
  3. Terry Davies et al, "Mining Remains in South West Shropshire", SCMC Account No.18, 2002

Coordinates: 52°34′15″N3°00′27″W / 52.570791°N 3.007459°W / 52.570791; -3.007459