Butte, Anaconda and Pacific Railway

Last updated
Butte, Anaconda and Pacific Railway
Rarus Railway
Butte, Anaconda and Pacific Railway electric locomotive.jpg
Overview
Main region(s)Montana, USA
Parent company Patriot Rail Corporation
Headquarters Anaconda, Montana
Founders Marcus Daly
Reporting mark BAP
Dates of operation1891present
Technical
Track gauge 4 ft 8+12 in (1,435 mm) standard gauge
No. of tracks1

The Butte, Anaconda and Pacific Railway( reporting mark BAP) is a short line railroad in the U.S. state of Montana. The BA&P was founded in 1891 and operated as such until sale in 1985, when it was renamed the Rarus Railway ( reporting mark RARW). The railway was again sold in May 2007 to the Patriot Rail Corporation, and the name returned to the Butte, Anaconda and Pacific Railway in July 2007. The railway was the main conduit for ore transport between Butte and Anaconda, and was used for filming of portions of the 1985 Golden Globe nominated movie Runaway Train .

Contents

Founding

in 1890 a dispute between the Montana Union Railway and the Anaconda Company arose over the cost to transport copper ore from the Butte, Montana mines to the Anaconda, Montana smelters. [1] Financed by the Marcus Daly, the interest behind the Anaconda Copper Mining Company, the Butte, Anaconda, and Pacific was incorporated in 1891 [2] [3] and opened for operation just two years later in 1893. [1] While first operated primarily to carry ore from Butte to Anaconda the company was chartered as a common carrier and also carried passengers and general freight. [1]

Early years

Headframes of the Anaconda Copper Mining Company, looking over the town of Butte, MT Butte headframes.jpg
Headframes of the Anaconda Copper Mining Company, looking over the town of Butte, MT
Butte, Anaconda and Pacific boxcab #47 on display in Butte. Butte, Anaconda and Pacific Railway - 47 electric boxcab locomotive (Anselmo Mine, Butte, Montana, USA).jpg
Butte, Anaconda and Pacific boxcab #47 on display in Butte.

When it first opened, the BA&P used steam locomotives to haul the ore, freight, and passenger trains, however the heavy daily use took its toll on the engines, and by 1910 alternative power sources were being sought. [1] The BA&P was an electrification pioneer by converting from steam to electrification between 1912 and 1913. As such it was the first major railroad line to electrify, with 75 mi (121 km) out of 114 mi (183 km) powered. While the common voltages used were 600 or 1200 volts DC, BA&P electrification was the highest available at that time, being 2,400 volts DC. [4] [1] The work was performed by General Electric and the railroad's own staff. As described in a period article:

The length of this line was 30 miles, having a total of 114 miles of single trackage, and considerable heavy grade. The electric locomotives hauled heavy ore trains and the operating results from every viewpoint far exceeded expectations. Mr. John D. Ryan, principal owner of this road,[...] (says) that "the cost was within the original estimate, the operation has been an unqualified success and the economy at least 50% in excess of the promises of the engineers at the time the work was undertaken. The tonnage handled over the lines increased over 50% in three years ; no difficulty has been found in moving the increase, and in the opinion of the railway managers the main line and two of the principal branches had reached the capacity of single track when electrification came into use."

E.W. Rice Jr. [4]

The BA&P sourced its electrical power from Great Falls, Montana 125 mi (201 km) to the northeast, and the power was converted from AC to the 2,400 volt DC at several substations along the railway. To replace the aging steam power, an order of seventeen new 80 short tons (73 t) electric locomotives was placed with General Electric, with two being passenger locomotives and the remaining fifteen being freight locomotives. [1] The two passenger locomotives were outfitted with double pantographs, dual headlights, and were geared for a standard running speed of 45 mph (72 km/h) while pulling three coaches. In contrast the freight locomotives had single headlights and one pantograph each, plus were geared for a standard speed of 35 mph (56 km/h). [1] More locomotives were soon needed and a second order of four locomotives was made with General Electric in 1914. These units were geared lower than the other freight units and intended to be used at slow speeds in the smelter and Butte mine yards. The 1913 GE locomotives were marked as numbers 50 through 66, the 1914 units 46 - 49, the 1916 units 42 - 45. [1]

During the electrified years, an average of eight passenger runs between Butte and Anaconda were made daily, with four runs going each direction. Usually the runs were performed by locomotives #65 or #66, which would pull a three car train of two passenger cars and a baggage car. Power was supplied to the cars via a 600 volt cable connected to the locomotive's dynamotor. Freight runs were nearly all comprised of ore loads, hauled in 18 short tons (16,000 kg) [1] ore cars each of which could carry 50 short tons (45 t). Groups of 30 ore cars were assembled at the mines in Butte and brought out to the yard at Rocker where a 60 car train, weighing an average of 4,000 short tons (3,600 t) was compiled for transport on the main line to Anaconda. In the West Anaconda yard the train was broken up into 1,400 short tons (1,300 t) groups and then taken by a single locomotive to the smelter for unloading. [1]

De-electrification

The electrification was abandoned in 1967 as it had become cheaper to operate diesel-electric locomotives.[ citation needed ]

Sale

#103, a GP7, retains its Rarus Railway scheme as of 2019. Rarus Railway 103.jpg
#103, a GP7, retains its Rarus Railway scheme as of 2019.

The railroad lost much of its business following the closure of the Anaconda smelter, and was sold to a consortium of local investors and reconstituted as the Rarus Railway ( reporting mark RARW) in 1985.

On July 19, 2007, Patriot Rail Corporation, the parent company which had acquired Rarus Railway in May 2007, officially changed the railways name back to Butte, Anaconda and Pacific Railway. [5]

Preservation

Many resources of the railway were included in the Butte, Anaconda and Pacific Railway Historic District, which was listed on the National Register of Historic Places in 1988.[ citation needed ]

Film credit

In 1985, The BA&P became the backdrop of full-length feature film Runaway Train . The film, directed by Andrei Konchalovsky, starred Jon Voight, who was nominated for an Academy Award & won the Golden Globe Award for Best Actor, Eric Roberts, who was nominated for an Academy Award & Golden Globe Award for Best Supporting Actor, Rebecca DeMornay, John P. Ryan, Kyle T. Heffner, Kenneth McMillan & Edward Bunker who also co-wrote the script. It was filmed on BA&P tack and at the Anaconda roundhouse in March 1985. The film was also nominated for the Golden Globe Award for Best Picture - Drama.[ citation needed ]

See also

Footnotes

  1. 1 2 3 4 5 6 7 8 9 10 Swett, Ira L. (1969). "Montana's Trolleys 2 - Butte, Anaconda, Bute Anaconda & Pacific". Interurbans Magazine; Interurbans Special 50. South Gate, California: Interurban Press. 26 (4 (winter, 1969)): 107–127.
  2. "From Butte to Missoula". The Anaconda Standard. 16 May 1891. p. 3. Retrieved 5 November 2021.
  3. American Railway Association (1922), p. 901.
  4. 1 2 Rice Jr. (1917).
  5. "Rarus Railway Brings Rail History to Life, Changes Name to Butte, Anaconda & Pacific Railway Company" (Press release). Patriot Rail Corporation. 2007-07-19. Archived from the original on 2007-09-30. Retrieved 2007-07-19.

Related Research Articles

<span class="mw-page-title-main">Electric locomotive</span> Locomotive powered by electricity

An electric locomotive is a locomotive powered by electricity from overhead lines, a third rail or on-board energy storage such as a battery or a supercapacitor. Locomotives with on-board fuelled prime movers, such as diesel engines or gas turbines, are classed as diesel-electric or gas turbine-electric and not as electric locomotives, because the electric generator/motor combination serves only as a power transmission system.

<span class="mw-page-title-main">Interurban</span> Type of electric railway which runs within and between cities or towns

The interurban is a type of electric railway, with tram-like electric self-propelled rail cars which run within and between cities or towns. The term "interurban" is usually used in North America, with other terms used outside it. They were very prevalent in North America between 1900 and 1925 and were used primarily for passenger travel between cities and their surrounding suburban and rural communities. The concept spread to countries such as Japan, the Netherlands, Switzerland, Belgium, Italy and Poland. Interurban as a term encompassed the companies, their infrastructure, their cars that ran on the rails, and their service. In the United States, the early 1900s interurban was a valuable economic institution, when most roads between towns, many town streets were unpaved, and transportation and haulage was by horse-drawn carriages and carts.

<span class="mw-page-title-main">Milwaukee Road</span> Class I railroad that operated in the Midwest and Northwest of the United States

The Chicago, Milwaukee, St. Paul and Pacific Railroad (CMStP&P), better known as the Milwaukee Road, was a Class I railroad that operated in the Midwest and Northwest of the United States from 1847 until 1986.

<span class="mw-page-title-main">Pennsylvania Railroad class E44</span>

The PRR E44 was an electric, rectifier-equipped locomotive built by General Electric for the Pennsylvania Railroad between 1960 and 1963. The PRR used them for freight service on the Northeast Corridor. They continued in service under Penn Central and Conrail until Conrail abandoned its electric operations in the early 1980s. They were then acquired by Amtrak and NJ Transit, where they lived short lives; all were retired by the mid-1980s. One is preserved at the Railroad Museum of Pennsylvania.

Railroad electrification in the United States began at the turn of the 20th century and comprised many different systems in many different geographical areas, few of which were connected. Despite this situation, these systems shared a small number of common reasons for electrification.

<span class="mw-page-title-main">Steeplecab</span> Style of electric locomotive with central cab and sloping equipment compartments at either end

Steeplecab is railroad terminology for a style or design of electric locomotive; the term is rarely if ever used for other forms of power. The name originated in North America and has been used in Britain as well.

<span class="mw-page-title-main">East Bay Electric Lines</span> Former railway lines in the San Francisco Bay Area

The East Bay Electric Lines were a unit of the Southern Pacific Railroad that operated electric interurban-type trains in the East Bay region of the San Francisco Bay Area. Beginning in 1862, the SP and its predecessors operated local steam-drawn ferry-train passenger service in the East Bay on an expanding system of lines, but in 1902 the Key System started a competing system of electric lines and ferries. The SP then drew up plans to expand and electrify its system of lines and this new service began in 1911. The trains served the cities of Berkeley, Albany, Emeryville, Oakland, Alameda, and San Leandro transporting commuters to and from the large Oakland Pier and SP Alameda Pier. A fleet of ferry boats ran between these piers and the docks of the Ferry Building on the San Francisco Embarcadero.

<span class="mw-page-title-main">Sacramento Northern Railway</span> Rail line

The Sacramento Northern Railway was a 183-mile (295 km) electric interurban railway that connected Chico in northern California with Oakland via the California capital, Sacramento. In its operation it ran directly on the streets of Oakland, Sacramento, Yuba City, Chico, and Woodland and ran interurban passenger service until 1941 and freight service into the 1960s.

<span class="mw-page-title-main">Tidewater Southern Railway</span>

The Tidewater Southern Railway was a short line railroad in Central California in the United States. For most of its history, it was a subsidiary of the Western Pacific Railroad. It was originally built as an interurban system, connecting to the Central California Traction Company, Western Pacific Railroad, Southern Pacific Railroad and Atchison, Topeka and Santa Fe Railway in Stockton, California. Its mainline went southeast from Stockton to Escalon, California and thence to Modesto, California before splitting into two branches ending at the towns of Turlock and Hilmar. Until the mid-1930s, there were plans to extend the line to Fresno and even toward the Los Angeles area. Today, much of the line is still operated by the Union Pacific Railroad. Of all the former interurban railroads in California, the former Tidewater Southern retains the highest percentage of still operating trackage.

<span class="mw-page-title-main">Glendale and Montrose Railway</span>

The Glendale and Montrose Railway Company (G&M) was an interurban electrified railway in Southern California, in the United States. It was unique among the Los Angeles local railways, as it was among the area's only interurban line never absorbed into the expansive Pacific Electric system.

<span class="mw-page-title-main">North Pacific Coast Railroad</span> Railroad in California

The North Pacific Coast Railroad (NPC) was a common carrier 3 ft (914 mm) narrow-gauge steam railroad begun in 1874 and sold in 1902 to new owners who renamed it the North Shore Railroad (California) (NSR) and which rebuilt the southern section into a standard-gauge electric railway.

The Rock Island Southern Railway, or RIS, was one of the most unusual interurban systems in the United States. It consisted of two distinct divisions, each with its own unique operating parameters. It provided passenger service to the western Illinois cities of Rock Island, Monmouth and Galesburg for two decades, with freight service surviving into the 1950s on the barest remnants of a once-impressive system.

<span class="mw-page-title-main">Visalia Electric Railroad</span>

The Visalia Electric Railroad, a wholly owned subsidiary of the Southern Pacific Railroad (SP), began as an electric interurban railroad in Tulare County, in the U.S. State of California. The railroad was incorporated on April 22, 1904. Passenger service was discontinued in 1924, and the electrification was removed in 1944. Subsequent operation was by diesel locomotive. The railroad was closed in 1992.

<span class="mw-page-title-main">San Francisco, Napa and Calistoga Railway</span> Railroad in California, United States

The San Francisco, Napa and Calistoga Railway, later briefly reorganized as the San Francisco and Napa Valley Railroad, was an electric interurban railroad in the U.S. state of California. In conjunction with the Monticello Steamship Company, the railway offered a combined rail- and ferry-service called the "Napa Valley Route."

<span class="mw-page-title-main">Salt Lake, Garfield and Western Railway</span>

The Salt Lake, Garfield & Western Railway, nicknamed through most of its history as The Saltair Route, is a short line railroad located in Salt Lake City, Utah. Originally incorporated as a dual passenger and freight railroad, it now provides freight-only railcar switching services to industries in Salt Lake City along its sixteen miles of track.

<span class="mw-page-title-main">Baldwin-Westinghouse electric locomotives</span>

Baldwin, the locomotive manufacturer, and Westinghouse, the promoter of AC electrification, joined forces in 1895 to develop AC railway electrification. Soon after the turn of the century, they marketed a single-phase high-voltage system to railroads. From 1904 to 1905 they supplied locomotives carrying a joint builder's plate to a number of American railroads, particularly for the New Haven line from New York to New Haven, and other New Haven lines. Westinghouse would produce the motors, controls, and other electrical gear, while Baldwin would produce the running gear, frame, body, and perform final assembly.

<span class="mw-page-title-main">Los Angeles Pacific Railroad</span> California interurban and freight routes (1896–1911)

The Los Angeles Pacific Railroad (1896−1911) (LAP) was an electric public transit and freight railway system in Los Angeles County, California. At its peak it had 230 miles (370 km) of track extending from Downtown Los Angeles to the Westside, Santa Monica, and the South Bay towns along Santa Monica Bay.

<span class="mw-page-title-main">Electric railway of the White Knob Copper Co.</span>

The electric railway of the White Knob Copper Co., Ltd. was operated by the White Knob Copper Co. at White Knob near Mackay, Idaho, in connection with its mines, having 7.1 miles (11.4 km) of railroad, two electric locomotives and 40 ore cars. The difference in level over the seven miles was 2,100 feet (640 m), an average of 6 per cent. Eighty tons of ore were handled by each train.

<span class="mw-page-title-main">Lake Erie and Northern Railway</span> Former interurban railway in Ontario, Canada

The Lake Erie and Northern Railway was an interurban electric railway which operated in the Grand River Valley in Ontario, Canada. The railway owned and operated a north–south mainline which ran from Galt in the north to Port Dover on the shore of Lake Erie in the south. Along the way, it ran through rural areas of Waterloo County, Brant County, and Norfolk County, as well as the city of Brantford, where it had an interchange with the Brantford and Hamilton Electric Railway. Construction on the mainline began in 1913. The railway began operations in 1916 as a subsidiary of the Canadian Pacific Railway (CPR), which had purchased the line before construction had finished. In 1931, it was consolidated with the Grand River Railway under a single CPR subsidiary, the Canadian Pacific Electric Lines (CPEL), which managed both interurban railways, though they continued to exist as legally separate entities. Passenger service was discontinued in 1955 but electric freight operations continued until 1961, when the LE&N's electric locomotives were replaced by diesel CPR locomotives and the line was de-electrified. In the same year, service on the mainline from Simcoe to Port Dover was discontinued, but the remainder continued to operate as a branchline which as early as 1975 was known as the CP Simcoe Subdivision. The remainder of the line was officially abandoned in the early 1990s, ending almost seventy-five years of operation.

References