This article needs more reliable medical references for verification or relies too heavily on primary sources .(February 2013) |
In cosmetology, exfoliation is the removal of the surface skin cells and built-up dirt from the skin's surface. The term comes from the Latin word exfoliare ('to strip off leaves'). [1] This is a regular practice within the cosmetic industry, both for its outcome of promoting skin regeneration as well as providing a deep cleanse of the skin barrier. Being used in facials, this process can be achieved by mechanical or chemical means, such as microdermabrasion or chemical peels. [2] Exfoliants are advertised as treatments that enhance beauty and promote a youthful and healthy appearance. [3]
Exfoliation was first practiced among the ancient Egyptians. [4] [5] This was also used in Asia, specifically in China, during the Qing Dynasty (1644–1944).
Mechanical exfoliation methods involve physically scrubbing the skin with an abrasive material. [6] These types of exfoliants include microfiber cloths, adhesive exfoliation sheets, micro-bead facial scrubs, crêpe paper, crushed apricot kernel or almond shells, sugar or salt crystals, pumice, and abrasive materials such as sponges, loofahs, brushes, and fingernails. [3] [7] A variety of facial scrubs are available in over-the-counter products for application by the user. People with dry skin should avoid exfoliants which have a significant portion of pumice, or crushed volcanic rock. Pumice is known as a material to exfoliate the skin of the feet. [8]
Loofahs are shower accessories that are commonly used for a dual purpose of cleaning and exfoliating the skin. Loofahs are named for the tropical and subtropical gourd within the cucumber family called luffa that is used as material to make the shower sponges. As the luffa plant matures, its fibers dry out, allowing the shell left over to be used as the spongy material for the exfoliation tool after their seeds are removed and the gourd is sliced and shaped. [9]
Loofahs offer benefits beyond exfoliation: they effectively spread soap around the body to cleanse and they stimulate blood circulation during use. Because loofahs are porous, they are more susceptible to harboring bacteria and fungal organisms that could be harmful and cause infections. [10] Proper care for the loofah includes rinsing and drying the loofah after each use and soaking the loofah in a diluted solution of bleach to clean it weekly. [10] It is also recommended to replace a loofah every 3 to 4 weeks. [10]
Exfoliation nets are shower accessories used for exfoliation and lathering that are composed of nylon material in the form of knotted mesh nets. [11] Exfoliation nets are native to Ghana, but they are a familiar shower accessory in numerous countries in West Africa. [11] The shape and material allow exfoliation nets to dry quicker than typical sponges, so there is less accumulation of bacteria in the accessory. [12]
Proper care for exfoliation nets includes leaving the net to hang dry between uses and cleaning it using a washing machine or hand-wash method weekly. [11] [12]
Micro-bead scrubs are cosmetic products that contain small plastic spheres that act as exfoliating components when scrubbed against skin. [13] The plastic beads act as alternatives for natural, eco-friendly exfoliating agents such as pumice, oatmeal, and walnut husks. [13] Microbeads are commonly composed of the material polyethylene terephthalate (PET); however, they can also be made with other plastic materials as well. [13]
When scrubbed against the skin, the beads polish the skin by removing the dead skin cells from the top layer of the skin. [14] The steps involved to use a micro-bead scrub include softening the skin using lukewarm water, gently scrubbing the product against the skin in circular motions, and rinsing the product off the skin. [14]
Due to the significant environmental impact and harm caused to marine ecosystems, microplastic beads have been banned by many countries. [15]
Pumice, which is an igneous rock that is composed of solidified lava that rapidly cools with gas bubbles being trapped inside of it, is commonly used as an exfoliating material. [16] Pumice is a decently abrasive material, making it useful as an exfoliating agent. [16]
Pumice stone can be effectively used as an exfoliation tool on calluses or corns, often found on feet, to remove the dead skin cells. [8]
To effectively use a pumice stone as an exfoliation tool, soaking the affected area in warm water until the skin begins to soften is a recommended first step. [8] The pumice stone then must be wet before rubbing against the affected area with moderate pressure for about 2 to 3 minutes. [8]
The exfoliating process of dermaplaning requires a single blade razor resembling a scalpel called a dermatome. [17] The dermatome is gently dragged across the skin on the face to remove the top layer of dead skin cells and peach fuzz. [18] This process helps the skin to absorb products better and boost the production of collagen, which improves the texture and tightness of the skin. [18]
A common misconception is that the vellus hair (known as peach fuzz) that is removed via dermaplaning will grow back thicker and darker, giving the appearance of a beard. This has been denied by dermaplaning specialists, who state that the removal of the dead skin and peach fuzz does not impact growth, color, or texture of facial hair. [18]
The procedure is recommended to be performed by an aesthetician. [17] In most cases, the blade must be used on clean, dry skin and covers the forehead, cheeks, chin, nose, and neck. However, dermaplaning can also be performed on skin that has oil applied to it. [19]
Some methods of hair removal also mechanically exfoliate the skin.
Waxing functions as an exfoliant, plucking the hair out of the skin. While it can be performed every two to eight weeks, waxing is not carried out as frequently as many exfoliants. Thus, it does not fully substitute for an exfoliation regimen.
Wet shaving also has exfoliating properties. Gliding a shaving brush vigorously across the face removes dead skin cells and cleanses the skin simultaneously. After applying the lather with a brush, the use of a razor removes dead skin because the razor is dragged closely across the skin. Manual razors exfoliate more effectively than electric razors.
Methods of chemical exfoliation for aesthetic enhancement of the skin have dated back to the time of the Ancient Egyptians, who used a combination of animal oils, alabaster, salt, and sour milk as an exfoliant to improve skin quality. [20] Various other chemical exfoliation techniques were developed in multiple other civilizations, such as Greek, Roman, Turkish, Indian, and Hungarian peoples. [20]
Chemical exfoliation to lessen the appearance of freckles with phenol peeling was a method developed by Tilbury Fox in 1871, and from there the use of phenol peeling increased in popularity. [20]
Chemical exfoliation methods, also known as chemical peeling, utilizes chemical substances in order to remove dead skin cells from the face. These types of exfoliants contain alpha-hydroxy acids (glycolic acid, lactic acid, mandelic acid, malic acid, tartaric acid, and citric acid), beta hydroxy acids (salicylic acid), polyhydroxy acids (lactobionic acid, gluconolactone, and galactose) or enzymes (trypsin or collagenase). [21] [22] [23] [24] These chemicals weaken cell adhesion, allowing them to ease away. Out of these, only AHAs (alpha-hydroxyl acids) and BHAs (beta hydroxyl acids) are available on the market for daily use. While AHAs are applied to clear the outer layer of the skin, BHAs penetrate and clean it from within. These scrubs may be applied in high concentrations by medical professionals, or provided in lower concentrations via over-the-counter products. This type of exfoliation is recommended for people treating acne. In Continental European beauty spa treatments, wine-producing grapes are considered to have exfoliating properties and are used in the practice of vinotherapy.
Though primarily intended for hair removal, chemical depilatory, such as Nair and shaving powder, also function as a chemical exfoliant. Such products contain calcium hydroxide and/or thioglycolic acid. They are applied more frequently than waxing (once a week) since they only partially destroy the hair below the skin, rather than pulling up the entire root as waxing does. Using them weekly can substitute for a weekly exfoliant regime.[ citation needed ]
Technological advances in the cosmetics industry have led to innovative exfoliation techniques, such as laser resurfacing.
Most commonly used for facial rejuvenation, this exfoliation process utilizes a laser to treat flaws on the skin surface. This method of exfoliation is most effective for treating wrinkles and discoloration. Carbon dioxide lasers, erbium lasers, and combinations of these are examples of the types of ablative lasers that are used in the resurfacing process. [25]
The top outer layer of the skin is removed by the laser, which simultaneously heats the layer of skin lying beneath it. This process encourages collagen growth, which will improve the texture and tightness of the skin. The top layer of the skin will continue to heal and grow back to reveal a smoother and tighter appearance. [25]
Fractional versions of ablative lasers have also recently been developed. These are designed to leave minimal amounts of untreated tissue on the skin to provide quicker healing time and less side effects. [25]
Ablative laser resurfacing has multiple risks associated with the exfoliation process. These risks include: redness, swelling, itching, pain, acne, infection, skin discoloration, and scarring. [25]
To have ablative laser resurfacing performed, one must consult with a doctor to review suitability of the procedure. [25]
Dermabrasion is used to reduce the appearance of flaws on facial skin, such as facial lines, wrinkles, scars, and discoloration. In this exfoliation process, a rapidly rotating device is used to remove the outermost layer of facial skin. [26]
Dermabrasion requires anesthetics to numb the skin before the procedure. Depending on the extent of the treatment, further numbing medication might be provided to limit the amount of pain felt from the treatment. [26]
There are multiple risks associating with dermabrasion. These risks include: redness, swelling, acne, enlarged pores, skin discoloration, infection, scarring, or rashes. In most cases, skin that is treated with dermabrasion will be sensitive with splotches of redness and discoloration for weeks following the procedure. [26]
According to dermatologists, chemical or manual exfoliation is not medically necessary, as dead skin cells already exfoliate naturally, [27] and excessive artificial exfoliation can break the skin's barrier against microorganisms and lead to infection, [27] as well as tightness and sensitivity in the skin. [27] Artificial exfoliation can exacerbate dry, flaky skin, which needs moisturization for repair, [27] and can result in some initial redness to the skin. Near the end of chemical peels, the skin frosts, with colors varying from a bright white to grey on the skin surface. [5]
Microbead particles used in mechanical exfoliation are too small (less than 1 mm) to be caught by sewage works, so large amounts of microbeads are released into the environment, which damage marine ecosystems. [28] Consequently, in June 2014, Illinois became the first American state to ban the use of microbeads, and cosmetics manufacturers such as L'Oreal, Johnson & Johnson, and Colgate agreed to use more natural ingredients. [28]
A scar is an area of fibrous tissue that replaces normal skin after an injury. Scars result from the biological process of wound repair in the skin, as well as in other organs, and tissues of the body. Thus, scarring is a natural part of the healing process. With the exception of very minor lesions, every wound results in some degree of scarring. An exception to this are animals with complete regeneration, which regrow tissue without scar formation.
Cosmetics are composed of mixtures of chemical compounds derived from either natural sources or synthetically created ones. Cosmetics have various purposes, including personal and skin care. They can also be used to conceal blemishes and enhance natural features. Makeup can also add colour to a person's face, enhance a person's features or change the appearance of the face entirely to resemble a different person, creature, or object.
A pedicure is a cosmetic treatment of the feet and toenails, analogous to a manicure.
A facial is a family of skin care treatments for the face, including steam, exfoliation, extraction, creams, lotions, facial masks, peels, and massage. They are normally performed in beauty salons, but are also a common spa treatment. They are used for general skin health as well as for specific skin conditions. Types of facials include European facial, LED light therapy facials, hydrafacials and mini-facials.
Ablation is the removal or destruction of something from an object by vaporization, chipping, erosive processes, or by other means. Examples of ablative materials are described below, including spacecraft material for ascent and atmospheric reentry, ice and snow in glaciology, biological tissues in medicine and passive fire protection materials.
The term cleanser refers to a product that cleans or removes dirt or other substances. A cleanser could be a detergent, and there are many types of cleansers that are produced with a specific objective or focus. For instance, a degreaser or carburetor cleanser used in automotive mechanics for cleaning certain engine and car parts.
Melasma is a tan or dark skin discoloration. Melasma is thought to be caused by sun exposure, genetic predisposition, hormone changes, and skin irritation. Although it can affect anyone, it is particularly common in women, especially pregnant women and those who are taking oral or patch contraceptives or hormone replacement therapy medications.
Dermabrasion is a type of surgical skin planing, generally with the goal of removing acne, scarring and other skin or tissue irregularities, typically performed in a professional medical setting by a dermatologist or plastic surgeon trained specifically in this procedure. Dermabrasion has been practiced for many years and involves the controlled deeper abrasion of the upper to mid layers of the skin with any variety of strong abrasive devices including a wire brush, diamond wheel or fraise, sterilized sandpaper, salt crystals or other mechanical means.
Pseudofolliculitis barbae (PFB) is a type of irritant folliculitis that commonly affects people who have curly or coarse facial hair. It occurs when hair curls back into the skin after shaving, causing inflammation, redness, and bumps. This can lead to ingrown hairs, scarring, and skin discoloration. PFB can be treated with various methods, including changing shaving habits, using topical creams or ointments, and undergoing laser hair removal. Prevention measures include proper shaving techniques, using sharp razors, and avoiding too close a shave.
In cosmetics, skin toner or simply toner refers to a water-based lotion, tonic, or wash designed to cleanse the skin and prepare it for other skincare products, such as moisturizers and serums. Typically used on the face, toners remove any remaining impurities after cleansing, balance the skin’s pH, and hydrate the skin. They also serve to protect and refresh the skin, often containing ingredients that can soothe, moisturize, exfoliate, or target specific skin concerns like oil control or pore minimization. Toners are typically categorized by their function and intensity into types such as skin bracers, tonics, acid toners, and astringents.
Ingrown hair is a condition where a hair curls back or grows sideways into the skin. The condition is most prevalent among people who have coarse or curly hair. It may or may not be accompanied by an infection of the hair follicle (folliculitis) or "razor bumps", which vary in size. While ingrown hair most commonly appears in areas where the skin is shaved or waxed, it can appear anywhere. Anything that causes the hair to be broken off unevenly with a sharp tip can cause ingrown hairs. Ingrown hairs are also caused because of lack of natural exfoliation in the skin.
A chemical peel is a treatment used to improve and smooth the texture of the skin. The skin on the face is most commonly treated, but peels can also be performed on the body. Chemical peels are intended to remove the outermost layers of the skin. To accomplish this task, the chosen peel solution induces a controlled injury to the skin, which causes the skin to peel. This process leads to smoother skin can improve fine lines, acne scars, and pigment. Medium depth peels must be performed by a medical provider.
Clean & Clear is an American brand of dermatology products owned by Kenvue.
Personal care products are consumer products which are applied on various external parts of the body such as skin, hair, nails, lips, external genital and anal areas, as well as teeth and mucous membrane of the oral cavity, in order to make them clean, protect them from harmful germs and keep them in good condition. They promote personal hygiene and overall health, well-being and appearance of those body parts. Toiletries form a narrower category of personal care products which are used for basic hygiene and cleanliness as a part of a daily routine. Cosmetic products, in contrast, are used for personal grooming and beautification. Pharmaceutical products are not considered personal care products.
Keratolysis exfoliativa is a sometimes harmless, sometimes painful skin condition that can affect the focal surface of the fingers and/or the palm or soles of the feet. It is often misdiagnosed as chronic contact dermatitis or psoriasis. It is characterized by dry skin and superficial, air-filled blisters. These blisters can be peeled off very easily and will leave reddish, tender areas. The loss of this corneal layer of the skin, which protects the underlying layers, leaves the skin more vulnerable to dryness and cracking.
Photoaging or photoageing is a term used for the characteristic changes to skin induced by chronic UVA and UVB exposure. Tretinoin is the best studied retinoid in the treatment of photoaging.
Facial care is a comprehensive process that involves a variety of products and routines aimed at maintaining the health, appearance, and radiance of the skin. The effectiveness of a facial care regimen depends on various factors such as skin type, sensitivity, age, hyperpigmentation, and acne. To achieve the best results, it is crucial to choose products that are suitable for your specific skin type and address any particular skin concerns you may have. There are many different forms of skin care treatments and practices, each offering unique benefits for the skin. Some popular forms of facial care include facial steaming, facial massage, and the use of masks. These treatments can help to cleanse, hydrate, and rejuvenate the skin, leaving it looking and feeling refreshed.
Microbeads are manufactured solid plastic particles of less than one millimeter in their largest dimension. They are most frequently made of polyethylene but can be of other petrochemical plastics such as polypropylene and polystyrene. They are used in exfoliating personal care products, toothpastes, and in biomedical and health-science research.
Enamel microabrasion is a procedure in cosmetic dentistry used to improve the appearance of the teeth. Like tooth whitening it is used to remove discolorations of the tooth surface but microabrasion is both a mechanical and chemical procedure.
Dermatologic surgical procedures are treatments aimed at managing a wide range of medically necessary and cosmetic conditions, with a long history dating back to ancient times.