Ford Puma (coupé)

Last updated

Ford Puma
English Ford Puma.jpg
Overview
Manufacturer Ford
ProductionSeptember 1997 – July 2002
Assembly Cologne, Germany
Designer Chris Svensson [1] [2] [3]
Body and chassis
Class Sports car [4] [5] [6]
Body style 3-door coupé [5] [7]
Layout Front-engine, front-wheel drive
Platform Ford B platform
Related Ford Fiesta Mark IV
Powertrain
Engine 1.4l i4 zetec (1997-2000)

1.6l i4 zetec (2000-2001)

1.7l i4 zetec
Transmission 5-speed IB5 manual
Dimensions
Wheelbase 2,446 mm (96.3 in)
Length3,984 mm (156.9 in)
Width1,837 mm (72.3 in)
Height1,315 mm (51.8 in)
Kerb weight 1,035–1,039 kg (2,282–2,291 lb)

The Ford Puma is a small car that was produced by Ford Europe from September 1997 to July 2002. The Puma is a three-door coupé that is based on the Mark IV Ford Fiesta and was built at Ford's Niehl plant in Cologne, Germany. The Puma follows common design cues with other Ford cars at the time, and is in the New Edge family of vehicles.

Contents

Concept

The Ford Puma program was initiated in 1993 when then–Ford CEO and President Jac Nasser and Ford Small and Medium Vehicle design director Claude Lobo discussed the possibility of doing a 2+2 coupe based on Fiesta chassis. All development was done using Paintbox CAD system which allowed designers to render a 2D and 3D models.

The first iteration of the design, called the Lynx concept car, was unveiled at the Geneva Motor Show in 1996, and production car was launched in 1997 Geneva Motor show. [8]

Technical details

Ford Puma rear 1999 Ford Puma 16V 1.4.jpg
Ford Puma rear
1.7-litre Zetec-S VCT engine in a 1999 Ford Puma Ford Zetec-S 1.7 engine.JPG
1.7-litre Zetec-S VCT engine in a 1999 Ford Puma

All Pumas are front-engined, front-wheel-drive, three-door coupés with four seats. They came with 15-inch (380 mm) alloy wheels as standard, (although the Ford Racing Puma was equipped with 17-inch (430 mm) alloy wheels), with front disc and rear drum brakes. The car was based on the Mark 4 Ford Fiesta, [9] with new engines (codeveloped with Yamaha), a new body, stiffer suspension, wider track and close-ratio gearbox, among other changes.

The Puma was available with four engine options: 1.4-litre (1997-2000), 1.6-litre (2000-2001), 1.7-litre VCT (only used in the Puma), and the Tickford-tuned 1.7-litre VCT (which was only used in the Ford Racing Puma), [10] [11] each of which used Ford's 16-v Sigma engines branded as Zetec-SE. Additionally, the 1.7-litre engines used Nikasil cylinder plating, which required a specific grade of oil (5W30 semisynthetic) to minimise mechanical wear.

The production journey of the 1.7-litre VCT was quite interesting. Rough machined cylinder blocks were shipped from Ford's Valencia plant in Spain to Yamaha in Japan for Nikasil coating and completion. These were then shipped back to Ford's Cologne plant where the Puma was assembled. [12]

All 1.7-litre-engined Pumas were equipped with low-speed traction control and antilock brakes. The antilock braking system was optional in the 1.4-litre Puma.

During the relatively short production run, approximately 133,000 Pumas were built (all models including the Ford Racing Puma). At its peak, 52,950 were registered with the DVLA in the UK, which has since reduced to 7,493 (including 5,457 that have statutory off-road notification (SORN)) as of Q3 2023. [13]

Engines

Engine, litre (cm3) [14] [15] PowerTorque0–100 km/h (0-62 mph)Top speed
1.4 (1388) 16-V91 PS (67 kW; 90 hp) @ 5500 rpm125 N⋅m (92 lb⋅ft)10.8 s180 km/h (112 mph)
1.6 (1596) 16-V104 PS (76 kW; 103 hp) @ 6000 rpm145 N⋅m (107 lb⋅ft)10.1 s190 km/h (118 mph)
1.7 (1679) 16-V VCT125 PS (92 kW; 123 hp) @ 6300 rpm157 N⋅m (116 lb⋅ft)9.2 s203 km/h (126 mph)
1.7 (1679) 16-V VCT155 PS (114 kW; 153 hp) @ 7000 rpm162 N⋅m (119 lb⋅ft)7.9 s203 km/h (126 mph)

Special edition variants in United Kingdom markets

Millennium

Years available: 1999(V) to 2000(X)

Quantity produced: 1000 [16]

Peak quantity registered with DVLA (UK): 899 (2001 Q4) [13]

Quantity remaining registered with DVLA (UK): 301 (including 216 that are SORN) as of Q3 2023 [13]

The Ford Millennium Edition cars were produced to commemorate the Millennium Products Award from the Design Council [17] in 1999 for being 'The first Ford in Britain designed solely on computer and in record time.' The Millennium Edition Puma featured eye-catching Zinc Yellow paintwork, and an Alchemy Blue (dark/navy blue) leather interior with Recaro seats. A numbered badge and keyring were available upon purchase from Ford, but the cars were not automatically numbered.

The Ford Ka and Focus also received the same award, and were also produced in the same quantity and paintwork, but with black leather interiors.

Black

Years available: 2000(X) to 2001(51)

Quantity produced: 1600 [18]

Peak quantity registered with DVLA (UK): 1579 (2003 Q4) [13]

Quantity remaining registered with DVLA (UK): 302 (including 226 that are SORN) as of Q3 2023 [13]

The Puma Black featured a Midnight Black (dark grey) leather interior, Panther Black paintwork, and Ford's F1-style alloy wheels. The original quantity of the Puma Black was meant to be only 1000, but as the edition proved to be popular, an additional 600 were produced.

Thunder

Years available: 2000(X) to 2002(52)

Quantity produced: 2000 (1000 each in Moondust Silver and Magnum Grey)

Peak quantity registered with DVLA (UK): 1908 (2002 Q4) [13]

Quantity remaining registered with DVLA (UK): 557 (including 371 that are SORN) as of Q3 2023 [13]

These were among the final 2000 Pumas produced. Although Moondust Silver was available throughout the whole of the production run, Magnum Grey was only available on the Thunder Edition. All of the Thunder Editions featured a Midnight Black (dark grey) leather interior, a six-disc CD changer and multispoke alloy wheels similar to those featured on the Fiesta Zetec-S.

Ford Racing Puma (FRP)

2000 Ford Racing Puma 16V 1.7 Front.jpg
2000 Ford Racing Puma 16V 1.7 Rear.jpg
Ford Racing Puma

Years available: 1999(V) to 2001(51)

Quantity produced: 500 (all numbered on inlet manifold) [19]

The Ford Racing Puma was the name eventually given to Ford's concept Puma, the Puma ST160 Concept, which was first unveiled to the public at the 1999 Geneva Motor Show. [20] At the time, Ford were keen to stress that this was no mere styling job and the idea was to transfer the know-how and technology learned directly from Ford Puma race and rally programmes to a road car. It was created by the Ford Rally specialist team at Boreham. The strictly limited production run was initially pencilled to run for 1000 units, with 500 destined for the German market, and 500 for the UK. All conversions were carried out by Tickford, Daventry UK. [21] In the end, only the 500 destined for the UK market were produced and sold.

Less than half of the 500 cars were actually sold directly to customers, with the vehicle's high price (£23,000 when new) often cited as a reason, as rival performance cars such as the Subaru Impreza (with an additional 50+ BHP/Turbo, four-wheel-drive and rallying pedigree) were being offered for a maximum of £21,000 with the optional Pro Drive pack. The lower than anticipated demand had Ford offering Racing Pumas to senior managers through their MRC scheme, which enabled cars to continue being registered and converted. The lack of demand when brand new has allowed it to maintain an increased value over the standard Puma due to its rarity.

Race braking system

For the Racing Puma, Ford partnered with Alcon Design to produce a 4-Piston Motorsport braking system. The Alcon Racing Front Brake calipers use 295 mm (11.6 in) x 28mm discs (253mm discs on the rear). These brakes are one of the defining attributes of the Racing Puma and they contribute significantly to enabling the standard 1,174 kg (2,588 lb) car to pull a substantial 1.1g+ of braking force in the dry. [22] This compares well to the normal Puma's ability to achieve 0.7g on regular, smaller, 258 mm (10.2 in) x 22 mm (0.9 in) brake discs and calipers.

The brake calipers themselves, being derived from a racing set-up, do not come fitted with any protective rubber boots which prevent brake dust and debris from coming into contact with the brake pistons. This means the brakes should be serviced regularly (fully dismantled and properly cleaned) to maintain efficiency. Furthermore, the inner portions of the caliper were unpainted aluminium, and are susceptible to corrosion.

Bodywork and handling

The bodywork was beefed up with wider, lightweight aluminium front and steel rear overhangs; these covered a substantially widened track at both the front and rear, requiring longer drive shafts unique to the Racing Puma. A front aerodynamic air splitter and modified wider front bumper with sports grill were used. The wheels are MiM Speedline alloys, 17 x 7.5 in (with an ET28 Offset) and use 215/40 17 tyres (original fitment tyres were Michelin SXGT 215/40 R17), this increases the width from 1674 mm to 1770 mm. The S1600 rally Puma is just 35 mm wider than this.

The Racing Puma's suspension was developed and honed by Ford's specialist division at Boreham, Essex, and the cars' monocoque shell was originally designed to be Ford's WRC entrant. Stig Blomqvist spent months fine-tuning the car's handling to ensure its chassis dynamics were perfected. The wider track, uprated springs, dampers, and special geometry settings refined the car's cornering poise to another level beyond the standard car's already excellent handling. The upshot of the improved chassis finesse was a bias towards tracks, hence the car has a very firm ride.

All Racing Pumas left the factory painted metallic Imperial Blue to signify their special racing edition status. This colour was only used by Ford on a select range of cars such as the Ford Escort Cosworth and Mk.1 Ford Focus RS edition models. The colour was not available on the regular Pumas in the UK market.

Gearbox and optional limited-slip differential

The standard IB5 gearbox was strengthened on the Racing Puma in comparison to the standard models. It contains modified shafts, which have been shot peened to withstand the extra load placed upon them. This allowed a revised Power-train Control Module software to be used, allowing more power and torque to be used in lower gears.

Additionally, Ford Racing offered an optional limited-slip differential to enhance handling even further, only 75 customer cars actually came equipped with that option from factory, but since then, subsequent owners have been known to retrofit it.

Racing-inspired interior

Sparco were commissioned to provide high-grip bucket seats for improved driver control in cornering situations. The blue Alcantara trim used on the seats and steering wheel provided improved grip over other material types. The door cards, rear seats, and rear interior were also trimmed with the same material, and the front seats were embroidered with the Ford Racing emblem.

FRP engine

The original design remit was to achieve 180 bhp using a 1.7-litre Zetec SE equipped with a turbocharger. However, due to spiralling project costs, this was not achieved and eventually the Racing Puma engineers were forced to keep their changes within a naturally aspirated engine. The majority of the engine remained unchanged from the 1.7 Zetec SE used in the standard Puma. Only the camshafts, air intake (with the unique edition number engraved on it), a specially tuned complete exhaust system by Janspeed, and a revised engine management software helped to increase power by 30 hp, reducing the 0-62 mph (100 km/h) time to 7.8 seconds, achieving a 126 mph (203 km/h) top speed.

Rallying

Ford Puma rally car of Andrew Costin-Hurley and Bryan Hull at Trax 2006 Ford Puma rally car Group B.jpg
Ford Puma rally car of Andrew Costin-Hurley and Bryan Hull at Trax 2006

Ford produced a Ford Puma kit car, which was designed specifically for rallying. The Puma's technical details included a Zetec SE all-alloy engine with four cylinders and 16 valves at 1596 cm3, power over 200 bhp (150 kW) at 9000 rpm, front wheel drive via a Hewland six-speed sequential gearbox, limited slip differential, dynamic front suspension using MacPherson struts with adjustable spring platforms, Ford Racing rear trailing arm beam with adjustable dynamic suspension, Alcon front brakes with 355 mm (14.0 in) diameter ventilated discs using four-piston calipers, Alcon 260 mm (10 in) diameter solid disc rear brakes with two piston calipers, a welded steel safety roll cage, and front and rear wheel arches and bumpers in composite.

The fuel tank was a 55-litre capacity FIA 'bag' tank located beneath the rear floor. Wheels were Tarmac 7 x 17 in aluminium wheels or 6 x 15 in aluminium wheels for gravel. [23]

Style and advertising

Puma interior at night Illuminated Interior Ford Puma 1.7.jpg
Puma interior at night

Stylistically, the Puma followed Ford's New Edge design strategy, as first seen in the 1996 Ford Ka. [24] While not as controversial as the Ka when it first appeared, the Puma did achieve critical acclaim for its well-proportioned and cat-like design cues.

The Puma was memorable for its pan-European launch campaign that featured Steve McQueen. [25] The original United Kingdom television advertisement used clips from the movie Bullitt and cut McQueen into the modern setting of a Puma in San Francisco. In Q4 2004, Ford once again used the McQueen footage for the first 2005 Ford Mustang commercial in the United States. Both commercials were directed by British director Paul Street, and won many advertising industry awards, featuring in all-time top 10 ad charts.

Discontinuation

The Puma was only sold in Europe. Production ended in 2001, although sale of stock vehicles continued into 2002. Ford did not replace it with another small coupé, and instead introduced the Ford StreetKa, a two-seater convertible based on the Fiesta like the Puma was. The StreetKa also borrowed the Puma's transmission and suspension. There are 7,493 Ford Pumas (including cars declared as SORN) that remain registered with the DVLA in the UK as of Q3 2023. [13] However, the name was revived by Ford as a crossover model in 2019.

Awards

Related Research Articles

<span class="mw-page-title-main">Bentley Arnage</span> British luxury car

The Bentley Arnage is a full-size luxury car manufactured by Bentley Motors in Crewe, England, from 1998 to 2010. The Arnage and its Rolls-Royce-branded sibling, the Silver Seraph, were introduced in the spring of 1998. They were the first entirely new designs for the two marques since 1980.

<span class="mw-page-title-main">Ford Ka</span> Motor vehicle

The Ford Ka is a small car manufactured by Ford Motor Company from 1996 to 2016 as a city car and from 2014 to 2021 as a subcompact car. It entered its second generation in 2008, produced by Fiat in Tychy, Poland. A third generation was introduced in 2016.

<span class="mw-page-title-main">Marcos Engineering</span> British sports car manufacturer

Marcos Engineering was a British sports car manufacturer. The name derives from the surnames of founders Jem Marsh and Frank Costin.

<span class="mw-page-title-main">Ferrari F50</span> Italian flagship sports car produced by Ferrari from 1995–1997

The Ferrari F50 is a mid-engine sports car manufactured by Italian automobile manufacturer Ferrari from 1995 until 1997. Introduced in 1995, the car is a two-door, two seat targa top. The F50 is powered by a 4.7 L naturally aspirated Tipo F130B 60-valve V12 engine that was developed from the 3.5 L V12 used in the 1990 Ferrari 641 Formula One car. The car's design is an evolution of the 1989 Ferrari Mythos concept car.

<span class="mw-page-title-main">Ford Galaxy</span> Motor vehicle

The Ford Galaxy is a seven-seater car produced by Ford of Europe from June 1995 to April 2023. Considered in the motor industry to be a large multi-purpose vehicle (MPV), it was the first Ford-brand MPV produced and marketed outside of North America, the model line is currently in its third generation. Sharing its platform architecture with the Ford Mondeo, the Galaxy was developed alongside the Ford S-Max; the model line is slotted between the Connect and Custom variants of the Ford Tourneo/Transit model family.

<span class="mw-page-title-main">Audi S4</span> Motor vehicle

The Audi S4 is the high performance variant of Audi's compact executive car A4. The original Audi S4, built from 1991 until 1994, was a performance-oriented version of Audi's 100 saloon/sedan. All subsequent S4s since 1997 have been based on the Audi A4; and as the A4 has evolved from one generation to the next, so has the S4.

<span class="mw-page-title-main">Audi RS 6</span> Motor vehicle

The Audi RS 6 is a high-performance variant of the Audi A6 range, produced by the high-performance subsidiary company Audi Sport GmbH, for its parent company Audi AG, a subsidiary of the Volkswagen Group, from 2002 onwards.

<span class="mw-page-title-main">Audi RS 4</span> Motor vehicle

The Audi RS 4 is the high-performance variant of the Audi A4 range produced by Audi Sport GmbH for AUDI AG, a division of the Volkswagen Group. It sits above the Audi S4 as the fastest, most sports-focused car based on the A4's "B" automobile platform. The RS 4 was reintroduced in 2012, based on the A4 Avant instead of the sedan as did the original model.

<span class="mw-page-title-main">Audi S6</span> Motor vehicle

The Audi S6 is the performance variant of the Audi A6, an executive car produced by German automaker Audi. It went on sale in 1994, shortly after the "A6" designation was introduced, replacing the "100" nameplate.

<span class="mw-page-title-main">Elfin MS8 Streamliner</span> Motor vehicle

The Elfin MS8 Streamliner is a sports car, successor to the Elfin MS7, a Repco-Holden V8 powered sports racing car in which Elfin founder Garrie Cooper won the 1975 Australian Sports Car Championship, and Stuart Kostera won the 1976 Australian Tourist Trophy.

<span class="mw-page-title-main">Renault Mégane RS</span> High performance version of the Renault Mégane

The Renault Mégane Renault Sport is a series of high-performance hatchback models based on the Renault Mégane, produced since 2004 by the high-performance subsidiary company Renault Sport for its parent company Alpine, a subsidiary of Renault. The Mégane RS won awards such as "Best hot hatch" from What car? (2010–2014), "Highest placed non-supercar" in Evo's annual Car of the Year test 2011 and "Best hot hatch" from Top Gear.

<span class="mw-page-title-main">Ford Falcon (AU)</span> Motor vehicle

The Ford Falcon (AU) is a full-size car that was produced by Ford Australia from 1998 to 2002. It was the sixth generation Ford Falcon and also included the Ford Fairmont (AU)—the luxury-oriented model range. The AU series replaced the EL Falcon and was constructed on the (at the time) new EA169 platform which continued to harbour Falcon models until 2010 when the BF wagon was discontinued, and Ford Territory models until 2011. The AU series was replaced by the updated BA series.

<span class="mw-page-title-main">Jaguar XK (X150)</span> Motor vehicle

The Jaguar XK is the second and final generation of the Jaguar XK 2+2 grand tourer manufactured and marketed by British automobile manufacturer Jaguar Cars under the X150 internal designation. The three-door fastback coupé debuted at the 2005 Frankfurt Motor Show with the 4.2-litre V8 engine of its predecessor, and the two-door convertible debuted in 2006 at the North American International Auto Show.

<span class="mw-page-title-main">Haynes Roadster</span> Motor vehicle

Haynes Roadster is a replica of a Lotus Seven home-built car, according to the book Build Your Own Sports Car: On a Budget by Chris Gibbs (ISBN 1-84425-391-0). A Ford Sierra is used in the car as a donor for drivetrain and suspension components.

<span class="mw-page-title-main">Ford Focus (first generation)</span> First generation of Ford Focus

The Ford Focus (first generation) is a compact car that was manufactured by Ford in Europe from 1998 to 2004 and by Ford in North America from 1998 to 2007. Ford began sales of the Focus to Europe in July 1998 and in North America during 1999 for the 2000 model year. Manufacturing in Argentina continued until 2008, and it was still on sale in Brazil until 2009.

<span class="mw-page-title-main">Tickford Vehicle Engineering</span> Former Australian automotive company

Tickford Vehicle Engineering (TVE) was a company responsible for numerous automotive projects and upgrades for Ford Australia between 1991 and 2002. In 1999, TVE setup Ford Tickford Experience (FTE) as a competitor to Holden Special Vehicles (HSV). In 2002, the operations changed to Ford Performance Vehicles (FPV), coinciding with Tickford's global operations being bought out by Prodrive.

<span class="mw-page-title-main">Ford Mondeo (first generation)</span> First generation of Ford Mondeo

The Ford Mondeo I (first generation) is a mid-size car that was produced by Ford, beginning on 23 November 1992, with sales beginning on 22 March 1993. It is also known as the Mk I Mondeo; the 1996 facelift versions are usually designated Mk II. Available as a four-door saloon, a five-door hatchback, and a five-door estate, all models for the European market were produced at Ford's plant in the Belgian city of Genk. In December 1992, Autocar published a section on the Mondeo, and how it would conquer rivals.

<span class="mw-page-title-main">Ford Fiesta (fourth generation)</span> Motor vehicle

The Fiesta Mark IV was launched in October 1995 and became Britain's best-selling car from 1996 to 1998, when it was overtaken by the all-new Ford Focus, a replacement for the Ford Escort.

<span class="mw-page-title-main">Ford Focus (fourth generation)</span> Fourth generation of Ford Focus

The fourth generationFord Focus, also known as the Focus Mk IV, is a small family car which has been produced by Ford from 2018. It was revealed in April 2018 to replace the third-generation Focus. As in the previous generation, the model is available with saloon, hatchback and estate body styles. This generation marked the demise of the Focus line-up in many regions, including North America, South America, and Southeast Asia, effectively limiting its market reach to just Europe, China, Taiwan, Australasia, and other minor markets.

<span class="mw-page-title-main">Ford Fiesta (fifth generation)</span> Motor vehicle

The Ford Fiesta Mk5 is the fifth generation of the Ford Fiesta supermini built in Europe between April 2002 and 2008. The Fiesta continued to be built in Mexico until 2010 and in Brazil until 2014. Most engines were carried over from the previous Fiesta. This generation became the best-selling Ford Fiesta generation to date. This was the first Fiesta to be sold in Asia and Australasia, where it replaced the Kia-based Festiva.

References

  1. ↑ "Bobcat by Another Name". Driven To Write. 3 October 2017.
  2. ↑ "The Ford Puma – The Time is Now". Car and Classic. 3 January 2020.
  3. ↑ Puma the inside story. Autosport Special Projects. 2002. p. 14. ISBN   0860249042.
  4. ↑ Crouch, Jonathan (31 March 2008). "Ford Puma (1997 - 2002) used car review". rac.co.uk. Retrieved 10 April 2023.
  5. 1 2 Spinks, Jez (1 October 2020). "The original Ford Puma". drive.com.au. Retrieved 10 April 2023.
  6. ↑ Pollard, Tim (3 April 2019). "Why the Puma was pukka: we drive the 1999 Ford Racing Puma". Car magazine . Retrieved 10 April 2023.
  7. ↑ "Ford Puma (1997 - 2002) Specs & Dimensions". parkers.co.uk. 6 June 2019. Retrieved 10 April 2023.
  8. ↑ Puma the inside story. Autosport Special Projects. 2002. p. 8. ISBN   0860249042.
  9. ↑ Puma the inside story. Autosport Special Projects. 2002. p. 25. ISBN   0860249042.
  10. ↑ Dawe, Jason (8 August 2004). "Ford Puma review | Used Car Reviews". London: Times Online. Archived from the original on 22 May 2010. Retrieved 9 May 2009.
  11. ↑ Puma the inside story. Autosport Special Projects. 2002. p. 60. ISBN   0860249042.
  12. ↑ Lewin, Tony (7 July 1997). "Yamaha coats cylinders for Ford Puma". Automotive News . Archived from the original on 17 March 2019.
  13. 1 2 3 4 5 6 7 8 Olly Smith. "Ford Puma - How Many Left?". Howmanyleft.co.uk. Retrieved 24 January 2024.
  14. ↑ "Search on "ford puma"". carfolio.com. Retrieved 1 June 2013.
  15. ↑ "Ford Puma (97-02) Performance - Facts and Figures". Parkers. 1 January 1997. Retrieved 1 June 2013.
  16. ↑ Puma the inside story. Autosport Special Projects. 2002. p. 64. ISBN   0860249042.
  17. ↑ "Design Council website". Archived from the original on 27 August 2013.
  18. ↑ Puma the inside story. Autosport Special Projects. 2002. p. 68. ISBN   0860249042.
  19. ↑ Puma the inside story. Autosport Special Projects. 2002. p. 65. ISBN   0860249042.
  20. ↑ "1999 FRP @ Geneva Motorshow".
  21. ↑ "Tickford Build the Racing Puma". Archived from the original on 26 January 2012.
  22. ↑ "Gallardo Braking Performance". Archived from the original on 27 February 2011.
  23. ↑ "Ford Puma S1600 Rally Car Technical Info". Gorallyschool.co.uk. Archived from the original on 5 August 2010. Retrieved 5 October 2010.
  24. ↑ Puma the inside story. Autosport Special Projects. 2002. p. 25. ISBN   0860249042.
  25. ↑ Puma the inside story. Autosport Special Projects. 2002. p. 44. ISBN   0860249042.
  26. ↑ Video: Top Gear Car Of The Year 1997 feature Archived 3 March 2016 at the Wayback Machine MPEG video featuring Tiff Needell driving a Ford Puma
  27. ↑ "Best Used Sporting Car of the Year 2004". What Car. 5 October 2004. Retrieved 5 October 2010.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.