LD&ECR Class C

Last updated

LD&ECR class C
LNER Class G3
Type and origin
Power typeSteam
Designer Kitson & Co.
BuilderKitson & Co.
Serial number3658–61, 3867–68
Build date1897–98
Total produced6
Specifications
Configuration:
   Whyte 0-4-4T
   UIC B2′ n2t
Gauge 4 ft 8 12 in (1,435 mm)
Driver dia.4 ft 6 in (1.372 m)
Trailing dia. 3 ft 0 in (0.914 m)
Length30 ft 0.75 in (9.163 m)
Loco weight50 long tons 0 cwt (112,000 lb or 50.8 t)
Fuel typeCoal
Fuel capacity2 long tons 0 cwt (4,500 lb or 2 t)
Water cap1,300 imp gal (5,900 l; 1,600 US gal)
Boiler pressure160 lbf/in2 (1.10 MPa)
Heating surface961 sq ft (89.3 m2)
Cylinders Two, inside
Cylinder size 17 in × 24 in (432 mm × 610 mm)
Performance figures
Tractive effort 14,292 lbf (63.57 kN)
Career
Operators
Class
  • LD&ECR: C
  • LNER: G3
Numbers
  • LD&ECR: 13–18
  • GCR: 1169, 1148B–1152B
  • (1169 → 1169B in 1917)
  • LNER: 6407–6402
Withdrawn1931–1935
DispositionAll scrapped

The LD&ECR class C (LNER Class G3) was a class of 0-4-4T steam locomotives of the Lancashire, Derbyshire and East Coast Railway.

Contents

Six were built in 1897–98. [1] They were the LD&ECR's only true passenger locomotives. They normally ran between Chesterfield Market Place and Lincoln and occasionally to the Midland Railway station in Sheffield. In later years five moved to the Sheffield area, with one transferring to Ardsley

All were scrapped between 1931 and 1935. [2]

Related Research Articles

Great Central Railway British pre-grouping railway company (1897–1922)

The Great Central Railway in England came into being when the Manchester, Sheffield and Lincolnshire Railway changed its name in 1897, anticipating the opening in 1899 of its London Extension. On 1 January 1923, the company was grouped into the London and North Eastern Railway.

John George Robinson CBE, was an English railway engineer, and was chief mechanical engineer of the Great Central Railway from 1900 to 1922.

The London and North Eastern Railway (LNER) produced several classes of locomotive, mostly to the designs of Nigel Gresley, characterised by a three-cylinder layout with a parallel boiler and round-topped firebox. It produced the most famous locomotive of its day, 4468 'Mallard', the holder of the world steam locomotive speed record. It also built the world-famous 4472 'Flying Scotsman'. However, its locomotive inheritance was much greater than just the 'A4 Class', it also produced highly successful mixed-traffic and freight designs.

Sheffield District Railway

The Sheffield District Railway was a 3.5 miles (6 km) railway line in South Yorkshire, England. It was built to give the Lancashire, Derbyshire and East Coast Railway access to Sheffield, primarily for goods traffic, for which a large goods depot at Attercliffe, in Sheffield, was built. The construction was sponsored by the LD&ECR and the Great Eastern Railway together, with the support of the Midland Railway, which agreed running powers over sections of its own lines. The Sheffield District Railway opened in 1900. The LD&ECR operated the passenger service, although the Midland Railway later ran passenger trains too. The SDR did not have rolling stock and did not operate trains itself. The LD&ECR was absorbed by the Great Central Railway in 1907, and the GCR inherited the LD&ECR running powers.

The Lancashire, Derbyshire and East Coast Railway (LD&ECR) was built to connect coalfields in Derbyshire and Nottinghamshire with Warrington and a new port on the Lincolnshire coast. It was a huge undertaking, and the company was unable to raise the money to build its line. With the financial help of the Great Eastern Railway it managed to open between Chesterfield and Lincoln with a branch towards Sheffield from 1896. Despite efforts to promote tourist travel, the passenger business was never buoyant, but collieries were connected to the line, at first and in succeeding years. The Great Eastern Railway, and other main line companies, transported coal to the southern counties, and the company's engines took coal to Immingham in great quantities. The company had a fleet of tank engines.

Boughton railway station (Nottinghamshire) Former railway station in Nottinghamshire, England

Boughton railway station served the village of Boughton in Nottinghamshire, England from 1897 to 1955 when it was closed. It has since been razed to the ground.

Tuxford Central railway station Former railway station in Nottinghamshire, England

Tuxford Central railway station is a former railway station in Tuxford, Nottinghamshire, England.

GCR Class 8A

The Great Central Railway (GCR) Class 8A was a class of 0-8-0 steam locomotive built between 1902 and 1911 for handling heavy coal trains over the Pennines. They all passed to the LNER in 1923, who redesignated them Class Q4. They were withdrawn from service between 1934 and 1951. Between 1942 and 1943, thirteen were rebuilt as 0-8-0T by Edward Thompson (engineer) and reclassified as Class Q1.

The LD&ECR class A was a class of 0-6-2T steam locomotives of the Lancashire, Derbyshire and East Coast Railway. An initial batch of eight was ordered and built in 1895. An order for 15 more was placed in 1899 but five of these were not delivered because the LD&ECR was unable to pay for them. The undelivered locomotives were re-sold by Kitson & Co. to the Hull and Barnsley Railway and became H&BR Class F1. There are some detail differences between the LD&ECR class A and the H&BR Class F1 but these were the result of later modifications.

GCR Class 1B

The GCR Class 1B was a class of 2-6-4T (tank) locomotives on the Great Central Railway. They were notable as the first locomotives of the 2-6-4T wheel arrangement to be used by a British standard-gauge railway; there had been two narrow-gauge examples on the Leek & Manifold Valley Light Railway since 1904.

Robert Absalom Thom was the final Locomotive, Carriage and Wagon Superintendent of the Lancashire, Derbyshire and East Coast Railway, and became a key figure in the locomotive departments of the company's successors, the Great Central Railway and the London & North Eastern Railway. Thom was born at Aberdeen on 14 June 1873. He attended Robert Gordon's College in Aberdeen, where he received a technical education.

The LD&ECR Class D was a class of nine 0-6-4T steam locomotives supplied to the Lancashire, Derbyshire and East Coast Railway in 1904 and 1906 by Kitson & Co. of Leeds. They later became the property of the Great Central Railway and finally the London and North Eastern Railway, upon which they were known as Class M1.

GCR Classes 8D and 8E were two pairs of three-cylinder compound steam locomotives of the 4-4-2 wheel arrangement built in 1905 and 1906 for the Great Central Railway.

GCR Class 2

The GCR Class 2 was derived from a Kitson (Leeds) built/Thomas Parker designed prototype 4-4-0 locomotive No. 561, exhibited in Manchester in 1887. The design lead to the production of a series of express steam locomotives built between 1890 and 1894 for use on the Manchester, Sheffield and Lincolnshire Railway, later the Great Central Railway. The last batch of six, built 1894, had larger bearings for the coupled wheels, coil springs for the driving axle and was classified 2A.

Dukeries Junction railway station Former railway station in Nottinghamshire, England

Dukeries Junction, originally Tuxford Exchange, was a railway station near Tuxford, Nottinghamshire, England. The station opened in 1897 and closed in 1950. It was located at the bridge where the Lancashire, Derbyshire and East Coast Railway crossed over the East Coast Main Line (ECML), with sets of platforms on both lines. The high-level location is now part of the High Marnham Test Track.

The Mansfield Railway was an eleven-mile railway line in Nottinghamshire, England. It was built to serve collieries opening in the coalfield around Mansfield, and ran between junctions at Clipstone And Kirkby-in-Ashfield on the Great Central Railway. It opened in 1916 and was worked by the GCR. Passenger stations were opened on the line, although at the date of opening road bus competition was already dominant.

Duckmanton Junction

Duckmanton Junction is a former railway junction near Arkwright Town in Derbyshire, England.

Beighton Junction is a set of railway junctions near Beighton on the border between Derbyshire and South Yorkshire, England.

The LD&ECR class B was a class of 0-6-0T steam locomotives of the Lancashire, Derbyshire and East Coast Railway.

References

  1. Dow 1965, p. 374.
  2. "The G3 (GCR Class C) 0-4-4T Locomotives". The London & North Eastern Railway Encyclopedia.

Sources