Lemniscate elliptic functions

Last updated
The lemniscate sine (red) and lemniscate cosine (purple) applied to a real argument, in comparison with the trigonometric sine y = sin(px/p) (pale dashed red). The lemniscate sine and lemniscate cosine functions of a real variable.png
The lemniscate sine (red) and lemniscate cosine (purple) applied to a real argument, in comparison with the trigonometric sine y = sin(πx/ϖ) (pale dashed red).

In mathematics, the lemniscate elliptic functions are elliptic functions related to the arc length of the lemniscate of Bernoulli. They were first studied by Giulio Fagnano in 1718 and later by Leonhard Euler and Carl Friedrich Gauss, among others. [1]

Contents

The lemniscate sine and lemniscate cosine functions, usually written with the symbols sl and cl (sometimes the symbols sinlem and coslem or sin lemn and cos lemn are used instead), [2] are analogous to the trigonometric functions sine and cosine. While the trigonometric sine relates the arc length to the chord length in a unit-diameter circle [3] the lemniscate sine relates the arc length to the chord length of a lemniscate

The lemniscate functions have periods related to a number 2.622057... called the lemniscate constant, the ratio of a lemniscate's perimeter to its diameter. This number is a quartic analog of the (quadratic) 3.141592..., ratio of perimeter to diameter of a circle.

As complex functions, sl and cl have a square period lattice (a multiple of the Gaussian integers) with fundamental periods [4] and are a special case of two Jacobi elliptic functions on that lattice, .

Similarly, the hyperbolic lemniscate sineslh and hyperbolic lemniscate cosineclh have a square period lattice with fundamental periods

The lemniscate functions and the hyperbolic lemniscate functions are related to the Weierstrass elliptic function .

Lemniscate sine and cosine functions

Definitions

The lemniscate functions sl and cl can be defined as the solution to the initial value problem: [5]

or equivalently as the inverses of an elliptic integral, the Schwarz–Christoffel map from the complex unit disk to a square with corners [6]

Beyond that square, the functions can be analytically continued to the whole complex plane by a series of reflections.

By comparison, the circular sine and cosine can be defined as the solution to the initial value problem:

or as inverses of a map from the upper half-plane to a half-infinite strip with real part between and positive imaginary part:

Relation to the lemniscate constant

The lemniscate sine function and hyperbolic lemniscate sine functions are defined as inverses of elliptic integrals. The complete integrals are related to the lemniscate constant p. Lemniscate constant as an integral.png
The lemniscate sine function and hyperbolic lemniscate sine functions are defined as inverses of elliptic integrals. The complete integrals are related to the lemniscate constant ϖ.

The lemniscate functions have minimal real period 2ϖ, minimal imaginary period 2ϖi and fundamental complex periods and for a constant ϖ called the lemniscate constant , [7]

The lemniscate functions satisfy the basic relation analogous to the relation

The lemniscate constant ϖ is a close analog of the circle constant π, and many identities involving π have analogues involving ϖ, as identities involving the trigonometric functions have analogues involving the lemniscate functions. For example, Viète's formula for π can be written:

An analogous formula for ϖ is: [8]

The Machin formula for π is and several similar formulas for π can be developed using trigonometric angle sum identities, e.g. Euler's formula . Analogous formulas can be developed for ϖ, including the following found by Gauss: [9]

The lemniscate and circle constants were found by Gauss to be related to each-other by the arithmetic-geometric mean M: [10]

Argument identities

Zeros, poles and symmetries

sl
{\displaystyle \operatorname {sl} }
in the complex plane. In the picture, it can be seen that the fundamental periods
(
1
+
i
)
p
{\displaystyle (1+i)\varpi }
and
(
1
-
i
)
p
{\displaystyle (1-i)\varpi }
are "minimal" in the sense that they have the smallest absolute value of all periods whose real part is non-negative. Lemniscate sine in the complex plane.svg
in the complex plane. In the picture, it can be seen that the fundamental periods and are "minimal" in the sense that they have the smallest absolute value of all periods whose real part is non-negative.

The lemniscate functions cl and sl are even and odd functions, respectively,

At translations of cl and sl are exchanged, and at translations of they are additionally rotated and reciprocated: [12]

Doubling these to translations by a unit-Gaussian-integer multiple of (that is, or ), negates each function, an involution:

As a result, both functions are invariant under translation by an even-Gaussian-integer multiple of . [13] That is, a displacement with for integers a, b, and k.

This makes them elliptic functions (doubly periodic meromorphic functions in the complex plane) with a diagonal square period lattice of fundamental periods and . [14] Elliptic functions with a square period lattice are more symmetrical than arbitrary elliptic functions, following the symmetries of the square.

Reflections and quarter-turn rotations of lemniscate function arguments have simple expressions:

The sl function has simple zeros at Gaussian integer multiples of ϖ, complex numbers of the form for integers a and b. It has simple poles at Gaussian half-integer multiples of ϖ, complex numbers of the form , with residues . The cl function is reflected and offset from the sl function, . It has zeros for arguments and poles for arguments with residues

Also

for some and

The last formula is a special case of complex multiplication. Analogous formulas can be given for where is any Gaussian integer – the function has complex multiplication by . [15]

There are also infinite series reflecting the distribution of the zeros and poles of sl: [16] [17]

Pythagorean-like identity

Curves x2 [?] y2 = a for various values of a. Negative a in green, positive a in blue, a = +-1 in red, a = [?] in black. Algebraic curves (x2 + y2) = a(1 - x2y2) for various values of a.png
Curves x² ⊕ y² = a for various values of a. Negative a in green, positive a in blue, a = ±1 in red, a = ∞ in black.

The lemniscate functions satisfy a Pythagorean-like identity:

As a result, the parametric equation parametrizes the quartic curve

This identity can alternately be rewritten: [18]

Defining a tangent-sum operator as gives:

The functions and satisfy another Pythagorean-like identity:

Derivatives and integrals

The derivatives are as follows:

The second derivatives of lemniscate sine and lemniscate cosine are their negative duplicated cubes:

The lemniscate functions can be integrated using the inverse tangent function:

Argument sum and multiple identities

Like the trigonometric functions, the lemniscate functions satisfy argument sum and difference identities. The original identity used by Fagnano for bisection of the lemniscate was: [19]

The derivative and Pythagorean-like identities can be used to rework the identity used by Fagano in terms of sl and cl. Defining a tangent-sum operator and tangent-difference operator the argument sum and difference identities can be expressed as: [20]

These resemble their trigonometric analogs:

In particular, to compute the complex-valued functions in real components,

Gauss discovered that

where such that both sides are well-defined.

Also

where such that both sides are well-defined; this resembles the trigonometric analog

Bisection formulas:

Duplication formulas: [21]

Triplication formulas: [21]

Note the "reverse symmetry" of the coefficients of numerator and denominator of . This phenomenon can be observed in multiplication formulas for where whenever and is odd. [15]

Lemnatomic polynomials

Let be the lattice

Furthermore, let , , , , (where ), be odd, be odd, and . Then

for some coprime polynomials and some [22] where

and

where is any -torsion generator (i.e. and generates as an -module). Examples of -torsion generators include and . The polynomial is called the -th lemnatomic polynomial. It is monic and is irreducible over . The lemnatomic polynomials are the "lemniscate analogs" of the cyclotomic polynomials, [23]

The -th lemnatomic polynomial is the minimal polynomial of in . For convenience, let and . So for example, the minimal polynomial of (and also of ) in is

and [24]

[25]

(an equivalent expression is given in the table below). Another example is [23]

which is the minimal polynomial of (and also of ) in

If is prime and is positive and odd, [26] then [27]

which can be compared to the cyclotomic analog

Specific values

Just as for the trigonometric functions, values of the lemniscate functions can be computed for divisions of the lemniscate into n parts of equal length, using only basic arithmetic and square roots, if and only if n is of the form where k is a non-negative integer and each pi (if any) is a distinct Fermat prime. [28]

Relation to geometric shapes

Arc length of Bernoulli's lemniscate

The lemniscate sine and cosine relate the arc length of an arc of the lemniscate to the distance of one endpoint from the origin. The lemniscate sine and cosine related to the arclength of the lemniscate of Bernoulli.png
The lemniscate sine and cosine relate the arc length of an arc of the lemniscate to the distance of one endpoint from the origin.
The trigonometric sine and cosine analogously relate the arc length of an arc of a unit-diameter circle to the distance of one endpoint from the origin. The sine and cosine related to the arclength of the unit-diameter circle.png
The trigonometric sine and cosine analogously relate the arc length of an arc of a unit-diameter circle to the distance of one endpoint from the origin.

, the lemniscate of Bernoulli with unit distance from its center to its furthest point (i.e. with unit "half-width"), is essential in the theory of the lemniscate elliptic functions. It can be characterized in at least three ways:

Angular characterization: Given two points and which are unit distance apart, let be the reflection of about . Then is the closure of the locus of the points such that is a right angle. [29]

Focal characterization: is the locus of points in the plane such that the product of their distances from the two focal points and is the constant .

Explicit coordinate characterization: is a quartic curve satisfying the polar equation or the Cartesian equation

The perimeter of is . [30]

The points on at distance from the origin are the intersections of the circle and the hyperbola . The intersection in the positive quadrant has Cartesian coordinates:

Using this parametrization with for a quarter of , the arc length from the origin to a point is: [31]

Likewise, the arc length from to is:

Or in the inverse direction, the lemniscate sine and cosine functions give the distance from the origin as functions of arc length from the origin and the point , respectively.

Analogously, the circular sine and cosine functions relate the chord length to the arc length for the unit diameter circle with polar equation or Cartesian equation using the same argument above but with the parametrization:

Alternatively, just as the unit circle is parametrized in terms of the arc length from the point by

is parametrized in terms of the arc length from the point by [32]

The notation is used solely for the purposes of this article; in references, notation for general Jacobi elliptic functions is used instead.

The lemniscate integral and lemniscate functions satisfy an argument duplication identity discovered by Fagnano in 1718: [33]

A lemniscate divided into 15 sections of equal arclength (red curves). Because the prime factors of 15 (3 and 5) are both Fermat primes, this polygon (in black) is constructible using a straightedge and compass. Lemniscate 15-gon.png
A lemniscate divided into 15 sections of equal arclength (red curves). Because the prime factors of 15 (3 and 5) are both Fermat primes, this polygon (in black) is constructible using a straightedge and compass.

Later mathematicians generalized this result. Analogously to the constructible polygons in the circle, the lemniscate can be divided into n sections of equal arc length using only straightedge and compass if and only if n is of the form where k is a non-negative integer and each pi (if any) is a distinct Fermat prime. [34] The "if" part of the theorem was proved by Niels Abel in 1827–1828, and the "only if" part was proved by Michael Rosen in 1981. [35] Equivalently, the lemniscate can be divided into n sections of equal arc length using only straightedge and compass if and only if is a power of two (where is Euler's totient function). The lemniscate is not assumed to be already drawn, as that would go against the rules of straightedge and compass constructions; instead, it is assumed that we are given only two points by which the lemniscate is defined, such as its center and radial point (one of the two points on the lemniscate such that their distance from the center is maximal) or its two foci.

Let . Then the n-division points for are the points

where is the floor function. See below for some specific values of .

Arc length of rectangular elastica

The lemniscate sine relates the arc length to the x coordinate in the rectangular elastica. Rectangular elastica and lemniscatic sine.png
The lemniscate sine relates the arc length to the x coordinate in the rectangular elastica.

The inverse lemniscate sine also describes the arc length s relative to the x coordinate of the rectangular elastica. [36] This curve has y coordinate and arc length:

The rectangular elastica solves a problem posed by Jacob Bernoulli, in 1691, to describe the shape of an idealized flexible rod fixed in a vertical orientation at the bottom end, and pulled down by a weight from the far end until it has been bent horizontal. Bernoulli's proposed solution established Euler–Bernoulli beam theory, further developed by Euler in the 18th century.

Elliptic characterization

The lemniscate elliptic functions and an ellipse The lemniscate elliptic functions and an ellipse.jpg
The lemniscate elliptic functions and an ellipse

Let be a point on the ellipse in the first quadrant and let be the projection of on the unit circle . The distance between the origin and the point is a function of (the angle where ; equivalently the length of the circular arc ). The parameter is given by

If is the projection of on the x-axis and if is the projection of on the x-axis, then the lemniscate elliptic functions are given by

Series Identities

Power series

The power series expansion of the lemniscate sine at the origin is [37]

where the coefficients are determined as follows:

where stands for all three-term compositions of . For example, to evaluate , it can be seen that there are only six compositions of that give a nonzero contribution to the sum: and , so

The expansion can be equivalently written as [38]

where

The power series expansion of at the origin is

where if is even and [39]

if is odd.

The expansion can be equivalently written as [40]

where

For the lemniscate cosine, [41]

where

Ramanujan's cos/cosh identity

Ramanujan's famous cos/cosh identity states that if

then [39]

There is a close relation between the lemniscate functions and . Indeed, [39] [42]

and

Continued fractions

For : [43]

Methods of computation

A fast algorithm, returning approximations to (which get closer to with increasing ), is the following: [44]

  • for eachdo
    • ifthen
      • break
  • for eachn from N to 0do
  • return

This is effectively using the arithmetic-geometric mean and is based on Landen's transformations. [45]

Several methods of computing involve first making the change of variables and then computing

A hyperbolic series method: [46] [47]

Fourier series method: [48]

The lemniscate functions can be computed more rapidly by

where

are the Jacobi theta functions. [49]

Fourier series for the logarithm of the lemniscate sine:

The following series identities were discovered by Ramanujan: [50]

The functions and analogous to and on the unit circle have the following Fourier and hyperbolic series expansions: [39] [42] [51]

The following identities come from product representations of the theta functions: [52]

A similar formula involving the function can be given. [53]

The lemniscate functions as a ratio of entire functions

Since the lemniscate sine is a meromorphic function in the whole complex plane, it can be written as a ratio of entire functions. Gauss showed that sl has the following product expansion, reflecting the distribution of its zeros and poles: [54]

where

Here, and denote, respectively, the zeros and poles of sl which are in the quadrant . A proof can be found in. [54] [55] Importantly, the infinite products converge to the same value for all possible orders in which their terms can be multiplied, as a consequence of uniform convergence. [56]

Proof of the infinite product for the lemniscate sine

Proof by logarithmic differentiation

It can be easily seen (using uniform and absolute convergence arguments to justify interchanging of limiting operations) that

(where are the Hurwitz numbers defined in Lemniscate elliptic functions § Hurwitz numbers) and

Therefore

It is known that

Then from

and

we get

Hence

Therefore

for some constant for but this result holds for all by analytic continuation. Using

gives which completes the proof.

Proof by Liouville's theorem

Let

with patches at removable singularities. The shifting formulas

imply that is an elliptic function with periods and , just as . It follows that the function defined by

when patched, is an elliptic function without poles. By Liouville's theorem, it is a constant. By using , and , this constant is , which proves the theorem.

Gauss conjectured that (this later turned out to be true) and commented that this “is most remarkable and a proof of this property promises the most serious increase in analysis”. [57] Gauss expanded the products for and as infinite series (see below). He also discovered several identities involving the functions and , such as

The
M
{\displaystyle M}
function in the complex plane. The complex argument is represented by varying hue. The M function in the complex plane.png
The function in the complex plane. The complex argument is represented by varying hue.
The
N
{\displaystyle N}
function in the complex plane. The complex argument is represented by varying hue. The N function in the complex plane.png
The function in the complex plane. The complex argument is represented by varying hue.

and

Thanks to a certain theorem [58] on splitting limits, we are allowed to multiply out the infinite products and collect like powers of . Doing so gives the following power series expansions that are convergent everywhere in the complex plane: [59] [60] [61] [62] [63]

This can be contrasted with the power series of which has only finite radius of convergence (because it is not entire).

We define and by

Then the lemniscate cosine can be written as

where [64]

Furthermore, the identities

and the Pythagorean-like identities

hold for all .

The quasi-addition formulas

(where ) imply further multiplication formulas for and by recursion. [65]

Gauss' and satisfy the following system of differential equations:

where . Both and satisfy the differential equation [66]

The functions can be also expressed by integrals involving elliptic functions:

where the contours do not cross the poles; while the innermost integrals are path-independent, the outermost ones are path-dependent; however, the path dependence cancels out with the non-injectivity of the complex exponential function.

An alternative way of expressing the lemniscate functions as a ratio of entire functions involves the theta functions (see Lemniscate elliptic functions § Methods of computation); the relation between and is

where .

Relation to other functions

Relation to Weierstrass and Jacobi elliptic functions

The lemniscate functions are closely related to the Weierstrass elliptic function (the "lemniscatic case"), with invariants g2 = 1 and g3 = 0. This lattice has fundamental periods and . The associated constants of the Weierstrass function are

The related case of a Weierstrass elliptic function with g2 = a, g3 = 0 may be handled by a scaling transformation. However, this may involve complex numbers. If it is desired to remain within real numbers, there are two cases to consider: a > 0 and a < 0. The period parallelogram is either a square or a rhombus. The Weierstrass elliptic function is called the "pseudolemniscatic case". [67]

The square of the lemniscate sine can be represented as

where the second and third argument of denote the lattice invariants g2 and g3. The lemniscate sine is a rational function in the Weierstrass elliptic function and its derivative: [68]

The lemniscate functions can also be written in terms of Jacobi elliptic functions. The Jacobi elliptic functions and with positive real elliptic modulus have an "upright" rectangular lattice aligned with real and imaginary axes. Alternately, the functions and with modulus i (and and with modulus ) have a square period lattice rotated 1/8 turn. [69] [70]

where the second arguments denote the elliptic modulus .

The functions and can also be expressed in terms of Jacobi elliptic functions:

Relation to the modular lambda function

The lemniscate sine can be used for the computation of values of the modular lambda function:

For example:

Inverse functions

The inverse function of the lemniscate sine is the lemniscate arcsine, defined as [71]

It can also be represented by the hypergeometric function:

which can be easily seen by using the binomial series.

The inverse function of the lemniscate cosine is the lemniscate arccosine. This function is defined by following expression:

For x in the interval , and

For the halving of the lemniscate arc length these formulas are valid:[ citation needed ]

Furthermore there are the so called Hyperbolic lemniscate area functions:[ citation needed ]

Expression using elliptic integrals

The lemniscate arcsine and the lemniscate arccosine can also be expressed by the Legendre-Form:

These functions can be displayed directly by using the incomplete elliptic integral of the first kind:[ citation needed ]

The arc lengths of the lemniscate can also be expressed by only using the arc lengths of ellipses (calculated by elliptic integrals of the second kind):[ citation needed ]

The lemniscate arccosine has this expression:[ citation needed ]

Use in integration

The lemniscate arcsine can be used to integrate many functions. Here is a list of important integrals (the constants of integration are omitted):

Hyperbolic lemniscate functions

Fundamental information

The hyperbolic lemniscate sine (red) and hyperbolic lemniscate cosine (purple) applied to a real argument, in comparison with the trigonometric tangent (pale dashed red). The hyperbolic lemniscate sine and cosine functions of a real variable.png
The hyperbolic lemniscate sine (red) and hyperbolic lemniscate cosine (purple) applied to a real argument, in comparison with the trigonometric tangent (pale dashed red).
The hyperbolic lemniscate sine in the complex plane. Dark areas represent zeros and bright areas represent poles. The complex argument is represented by varying hue. Slh in the complex plane.png
The hyperbolic lemniscate sine in the complex plane. Dark areas represent zeros and bright areas represent poles. The complex argument is represented by varying hue.

For convenience, let . is the "squircular" analog of (see below). The decimal expansion of (i.e. [72] ) appears in entry 34e of chapter 11 of Ramanujan's second notebook. [73]

The hyperbolic lemniscate sine (slh) and cosine (clh) can be defined as inverses of elliptic integrals as follows:

where in , is in the square with corners . Beyond that square, the functions can be analytically continued to meromorphic functions in the whole complex plane.

The complete integral has the value:

Therefore, the two defined functions have following relation to each other:

The product of hyperbolic lemniscate sine and hyperbolic lemniscate cosine is equal to one:

The functions and have a square period lattice with fundamental periods .

The hyperbolic lemniscate functions can be expressed in terms of lemniscate sine and lemniscate cosine:

But there is also a relation to the Jacobi elliptic functions with the elliptic modulus one by square root of two:

The hyperbolic lemniscate sine has following imaginary relation to the lemniscate sine:

This is analogous to the relationship between hyperbolic and trigonometric sine:

Relation to quartic Fermat curve

Hyperbolic Lemniscate Tangent and Cotangent

This image shows the standardized superelliptic Fermat squircle curve of the fourth degree:

Superellipse with the relation
x
4
+
y
4
=
1
{\displaystyle x^{4}+y^{4}=1} Superellipse chamfered square.svg
Superellipse with the relation

In a quartic Fermat curve (sometimes called a squircle) the hyperbolic lemniscate sine and cosine are analogous to the tangent and cotangent functions in a unit circle (the quadratic Fermat curve). If the origin and a point on the curve are connected to each other by a line L, the hyperbolic lemniscate sine of twice the enclosed area between this line and the x-axis is the y-coordinate of the intersection of L with the line . [74] Just as is the area enclosed by the circle , the area enclosed by the squircle is . Moreover,

where is the arithmetic–geometric mean.

The hyperbolic lemniscate sine satisfies the argument addition identity:

When is real, the derivative and the original antiderivative of and can be expressed in this way:

There are also the Hyperbolic lemniscate tangent and the Hyperbolic lemniscate coangent als further functions:

The functions tlh and ctlh fulfill the identities described in the differential equation mentioned:

The functional designation sl stands for the lemniscatic sine and the designation cl stands for the lemniscatic cosine. In addition, those relations to the Jacobi elliptic functions are valid:

When is real, the derivative and quarter period integral of and can be expressed in this way:

Derivation of the Hyperbolic Lemniscate functions

With respect to the quartic Fermat curve
x
4
+
y
4
=
1
{\displaystyle x^{4}+y^{4}=1}
, the hyperbolic lemniscate sine is analogous to the trigonometric tangent function. Unlike
slh
{\displaystyle \operatorname {slh} }
and
clh
{\displaystyle \operatorname {clh} }
, the functions
sin
4
{\displaystyle \sin _{4}}
and
cos
4
{\displaystyle \cos _{4}}
cannot be analytically extended to meromorphic functions in the whole complex plane. Quartic Fermat curve.png
With respect to the quartic Fermat curve , the hyperbolic lemniscate sine is analogous to the trigonometric tangent function. Unlike and , the functions and cannot be analytically extended to meromorphic functions in the whole complex plane.

The horizontal and vertical coordinates of this superellipse are dependent on twice the enclosed area w = 2A, so the following conditions must be met:

The solutions to this system of equations are as follows:

The following therefore applies to the quotient:

The functions x(w) and y(w) are called cotangent hyperbolic lemniscatus and hyperbolic tangent.

The sketch also shows the fact that the derivation of the Areasinus hyperbolic lemniscatus function is equal to the reciprocal of the square root of the successor of the fourth power function.

First proof: comparison with the derivative of the arctangent

There is a black diagonal on the sketch shown on the right. The length of the segment that runs perpendicularly from the intersection of this black diagonal with the red vertical axis to the point (1|0) should be called s. And the length of the section of the black diagonal from the coordinate origin point to the point of intersection of this diagonal with the cyan curved line of the superellipse has the following value depending on the slh value:

This connection is described by the Pythagorean theorem.

An analogous unit circle results in the arctangent of the circle trigonometric with the described area allocation.

The following derivation applies to this:

To determine the derivation of the areasinus lemniscatus hyperbolicus, the comparison of the infinitesimally small triangular areas for the same diagonal in the superellipse and the unit circle is set up below. Because the summation of the infinitesimally small triangular areas describes the area dimensions. In the case of the superellipse in the picture, half of the area concerned is shown in green. Because of the quadratic ratio of the areas to the lengths of triangles with the same infinitesimally small angle at the origin of the coordinates, the following formula applies:

Second proof: integral formation and area subtraction

In the picture shown, the area tangent lemniscatus hyperbolicus assigns the height of the intersection of the diagonal and the curved line to twice the green area. The green area itself is created as the difference integral of the superellipse function from zero to the relevant height value minus the area of the adjacent triangle:

The following transformation applies:

And so, according to the chain rule, this derivation holds:

Specific values

This list shows the values of the Hyperbolic Lemniscate Sine accurately. Recall that,

whereas so the values below such as are analogous to the trigonometric .

That table shows the most important values of the Hyperbolic Lemniscate Tangent and Cotangent functions:

Combination and halving theorems

Given the hyperbolic lemniscate tangent () and hyperbolic lemniscate cotangent (). Recall the hyperbolic lemniscate area functions from the section on inverse functions,

Then the following identities can be established,

hence the 4th power of and for these arguments is equal to one,

so a 4th power version of the Pythagorean theorem. The bisection theorem of the hyperbolic sinus lemniscatus reads as follows:

This formula can be revealed as a combination of the following two formulas:

In addition, the following formulas are valid for all real values :

These identities follow from the last-mentioned formula:

Hence, their 4th powers again equal one,

The following formulas for the lemniscatic sine and lemniscatic cosine are closely related:

Coordinate Transformations

Analogous to the determination of the improper integral in the Gaussian bell curve function, the coordinate transformation of a general cylinder can be used to calculate the integral from 0 to the positive infinity in the function integrated in relation to x. In the following, the proofs of both integrals are given in a parallel way of displaying.

This is the cylindrical coordinate transformation in the Gaussian bell curve function:

And this is the analogous coordinate transformation for the lemniscatory case:

In the last line of this elliptically analogous equation chain there is again the original Gauss bell curve integrated with the square function as the inner substitution according to the Chain rule of infinitesimal analytics (analysis).

In both cases, the determinant of the Jacobi matrix is multiplied to the original function in the integration domain.

The resulting new functions in the integration area are then integrated according to the new parameters.

Number theory

In algebraic number theory, every finite abelian extension of the Gaussian rationals is a subfield of for some positive integer . [23] [76] This is analogous to the Kronecker–Weber theorem for the rational numbers which is based on division of the circle – in particular, every finite abelian extension of is a subfield of for some positive integer . Both are special cases of Kronecker's Jugendtraum, which became Hilbert's twelfth problem.

The field (for positive odd ) is the extension of generated by the - and -coordinates of the -torsion points on the elliptic curve . [76]

Hurwitz numbers

The Bernoulli numbers can be defined by

and appear in

where is the Riemann zeta function.

The Hurwitz numbers named after Adolf Hurwitz, are the "lemniscate analogs" of the Bernoulli numbers. They can be defined by [77] [78]

where is the Weierstrass zeta function with lattice invariants and . They appear in

where are the Gaussian integers and are the Eisenstein series of weight , and in

The Hurwitz numbers can also be determined as follows: ,

and if is not a multiple of . [79] This yields [77]

Also [80]

where such that just as

where (by the von Staudt–Clausen theorem).

In fact, the von Staudt–Clausen theorem determines the fractional part of the Bernoulli numbers:

(sequence A000146 in the OEIS ) where is any prime, and an analogous theorem holds for the Hurwitz numbers: suppose that is odd, is even, is a prime such that , (see Fermat's theorem on sums of two squares) and . Then for any given , is uniquely determined; equivalently where is the number of solutions of the congruence in variables that are non-negative integers. [81] The Hurwitz theorem then determines the fractional part of the Hurwitz numbers: [77]

The sequence of the integers starts with [77]

Let . If is a prime, then . If is not a prime, then . [82]

Some authors instead define the Hurwitz numbers as .

Appearances in Laurent series

The Hurwitz numbers appear in several Laurent series expansions related to the lemniscate functions: [83]

Analogously, in terms of the Bernoulli numbers:

A quartic analog of the Legendre symbol

Let be a prime such that . A quartic residue (mod ) is any number congruent to the fourth power of an integer. Define to be if is a quartic residue (mod ) and define it to be if is not a quartic residue (mod ).

If and are coprime, then there exist numbers (see [84] for these numbers) such that [85]

This theorem is analogous to

where is the Legendre symbol.

World map projections

"The World on a Quincuncial Projection", from Peirce (1879). Peirce Quincuncial Projection 1879.jpg
"The World on a Quincuncial Projection", from Peirce (1879).

The Peirce quincuncial projection, designed by Charles Sanders Peirce of the US Coast Survey in the 1870s, is a world map projection based on the inverse lemniscate sine of stereographically projected points (treated as complex numbers). [86]

When lines of constant real or imaginary part are projected onto the complex plane via the hyperbolic lemniscate sine, and thence stereographically projected onto the sphere (see Riemann sphere), the resulting curves are spherical conics, the spherical analog of planar ellipses and hyperbolas. [87] Thus the lemniscate functions (and more generally, the Jacobi elliptic functions) provide a parametrization for spherical conics.

A conformal map projection from the globe onto the 6 square faces of a cube can also be defined using the lemniscate functions. [88] Because many partial differential equations can be effectively solved by conformal mapping, this map from sphere to cube is convenient for atmospheric modeling. [89]

See also

Notes

  1. Fagnano (1718–1723); Euler (1761); Gauss (1917)
  2. Gauss (1917) p. 199 used the symbols sl and cl for the lemniscate sine and cosine, respectively, and this notation is most common today: see e.g. Cox (1984) p. 316, Eymard & Lafon (2004) p. 204, and Lemmermeyer (2000) p. 240. Ayoub (1984) uses sinlem and coslem. Whittaker & Watson (1920) use the symbols sin lemn and cos lemn. Some sources use the generic letters s and c. Prasolov & Solovyev (1997) use the letter φ for the lemniscate sine and φ′ for its derivative.
  3. The circle is the unit-diameter circle centered at with polar equation the degree-2 clover under the definition from Cox & Shurman (2005). This is not the unit-radius circle centered at the origin. Notice that the lemniscate is the degree-4 clover.
  4. The fundamental periods and are "minimal" in the sense that they have the smallest absolute value of all periods whose real part is non-negative.
  5. Robinson (2019a) starts from this definition and thence derives other properties of the lemniscate functions.
  6. This map was the first ever picture of a Schwarz–Christoffel mapping, in Schwarz (1869) p. 113.
  7. Schappacher (1997). OEIS sequence A062539 lists the lemniscate constant's decimal digits.
  8. Levin (2006)
  9. Todd (1975)
  10. Cox (1984)
  11. Dark areas represent zeros, and bright areas represent poles. As the argument of changes from (excluding ) to , the colors go through cyan, blue , magneta, red , orange, yellow , green, and back to cyan .
  12. Combining the first and fourth identity gives . This identity is (incorrectly) given in Eymard & Lafon (2004) p. 226, without the minus sign at the front of the right-hand side.
  13. The even Gaussian integers are the residue class of 0, modulo 1 + i, the black squares on a checkerboard.
  14. Prasolov & Solovyev (1997); Robinson (2019a)
  15. 1 2 Cox (2012)
  16. Reinhardt & Walker (2010a) §22.12.6, §22.12.12
  17. Analogously,
  18. Lindqvist & Peetre (2001) generalizes the first of these forms.
  19. Ayoub (1984); Prasolov & Solovyev (1997)
  20. Euler (1761) §44 p. 79, §47 pp. 80–81
  21. 1 2 Euler (1761) §46 p. 80
  22. In fact, .
  23. 1 2 3 Cox & Hyde (2014)
  24. Gómez-Molleda & Lario (2019)
  25. The fourth root with the least positive principal argument is chosen.
  26. The restriction to positive and odd can be dropped in .
  27. Cox (2013) p. 142, Example 7.29(c)
  28. Rosen (1981)
  29. Eymard & Lafon (2004) p. 200
  30. And the area enclosed by is , which stands in stark contrast to the unit circle (whose enclosed area is a non-constructible number).
  31. Euler (1761); Siegel (1969). Prasolov & Solovyev (1997) use the polar-coordinate representation of the Lemniscate to derive differential arc length, but the result is the same.
  32. Reinhardt & Walker (2010a) §22.18.E6
  33. Siegel (1969); Schappacher (1997)
  34. Such numbers are OEIS sequence A003401.
  35. Abel (1827–1828); Rosen (1981); Prasolov & Solovyev (1997)
  36. Euler (1786); Sridharan (2004); Levien (2008)
  37. "A104203". The On-Line Encyclopedia of Integer Sequences.
  38. Lomont, J.S.; Brillhart, John (2001). Elliptic Polynomials. CRC Press. pp. 12, 44. ISBN   1-58488-210-7.
  39. 1 2 3 4 "A193543 - Oeis".
  40. Lomont, J.S.; Brillhart, John (2001). Elliptic Polynomials. CRC Press. ISBN   1-58488-210-7. p. 79, eq. 5.36
  41. Lomont, J.S.; Brillhart, John (2001). Elliptic Polynomials. CRC Press. ISBN   1-58488-210-7. p. 79, eq. 5. 36 and p. 78, eq. 5.33
  42. 1 2 "A289695 - Oeis".
  43. Wall, H. S. (1948). Analytic Theory of Continued Fractions. Chelsea Publishing Company. pp. 374–375.
  44. Reinhardt & Walker (2010a) §22.20(ii)
  45. Carlson (2010) §19.8
  46. Reinhardt & Walker (2010a) §22.12.12
  47. In general, and are not equivalent, but the resulting infinite sum is the same.
  48. Reinhardt & Walker (2010a) §22.11
  49. Reinhardt & Walker (2010a) §22.2.E7
  50. Berndt (1994) p. 247, 248, 253
  51. Reinhardt & Walker (2010a) §22.11.E1
  52. Whittaker & Watson (1927)
  53. Borwein & Borwein (1987)
  54. 1 2 Eymard & Lafon (2004) p. 227.
  55. Cartan, H. (1961). Théorie élémentaire des fonctions analytiques d'une ou plusieurs variables complexes (in French). Hermann. pp. 160–164.
  56. More precisely, suppose is a sequence of bounded complex functions on a set , such that converges uniformly on . If is any permutation of , then for all . The theorem in question then follows from the fact that there exists a bijection between the natural numbers and 's (resp. 's).
  57. Bottazzini & Gray (2013) p. 58
  58. More precisely, if for each , exists and there is a convergent series of nonnegative real numbers such that for all and , then
  59. Alternatively, it can be inferred that these expansions exist just from the analyticity of and . However, establishing the connection to "multiplying out and collecting like powers" reveals identities between sums of reciprocals and the coefficients of the power series, like in the series, and infinitely many others.
  60. Gauss, C. F. (1866). Werke (Band III) (in Latin and German). Herausgegeben der Königlichen Gesellschaft der Wissenschaften zu Göttingen. p. 405; there's an error on the page: the coefficient of should be , not .
  61. If , then the coefficients are given by the recurrence with where are the Hurwitz numbers defined in Lemniscate elliptic functions § Hurwitz numbers.
  62. The power series expansions of and are useful for finding a -division polynomial for the -division of the lemniscate (where where such that is odd). For example, suppose we want to find a -division polynomial. Given that
    for some constants , from
    where
    we have
    Therefore, a -division polynomial is
    (meaning one of its roots is ). The equations arrived at by this process are the lemniscate analogs of
    (so that is one of the solutions) which comes up when dividing the unit circle into arcs of equal length. In the following note, the first few coefficients of the monic normalization of such -division polynomials are described symbolically in terms of .
  63. By utilizing the power series expansion of the function, it can be proved that a polynomial having as one of its roots (with from the previous note) is
    where
    and so on.
  64. Zhuravskiy, A. M. (1941). Spravochnik po ellipticheskim funktsiyam (in Russian). Izd. Akad. Nauk. U.S.S.R.
  65. For example, by the quasi-addition formulas, the duplication formulas and the Pythagorean-like identities, we have
    so
    On dividing the numerator and the denominator by , we obtain the triplication formula for :
  66. Gauss (1866), p. 408
  67. Robinson (2019a)
  68. Eymard & Lafon (2004) p. 234
  69. Armitage, J. V.; Eberlein, W. F. (2006). Elliptic Functions. Cambridge University Press. p. 49. ISBN   978-0-521-78563-1.
  70. The identity can be found in Greenhill (1892) p. 33.
  71. Siegel (1969)
  72. http://oeis.org/A175576 [ bare URL ]
  73. Berndt, Bruce C. (1989). Ramanujan's Notebooks Part II. Springer. ISBN   978-1-4612-4530-8. p. 96
  74. Levin (2006); Robinson (2019b)
  75. Levin (2006) p. 515
  76. 1 2 Cox (2012) p. 508, 509
  77. 1 2 3 4 Arakawa, Tsuneo; Ibukiyama, Tomoyoshi; Kaneko, Masanobu (2014). Bernoulli Numbers and Zeta Functions. Springer. ISBN   978-4-431-54918-5. p. 203—206
  78. Equivalently, where and is the Jacobi epsilon function with modulus .
  79. The Bernoulli numbers can be determined by an analogous recurrence: where and .
  80. Katz, Nicholas M. (1975). "The congruences of Clausen — von Staudt and Kummer for Bernoulli-Hurwitz numbers". Mathematische Annalen. 216 (1): 1–4. See eq. (9)
  81. For more on the function, see Lemniscate constant.
  82. Hurwitz, Adolf (1963). Mathematische Werke: Band II (in German). Springer Basel AG. p. 370
  83. Arakawa et al. (2014) define by the expansion of
  84. Eisenstein, G. (1846). "Beiträge zur Theorie der elliptischen Functionen". Journal für die reine und angewandte Mathematik (in German). 30. Eisenstein uses and .
  85. Ogawa, Takuma (2005). "Similarities between the trigonometric function and the lemniscate function from arithmetic view point". Tsukuba Journal of Mathematics. 29 (1).
  86. Peirce (1879). Guyou (1887) and Adams (1925) introduced transverse and oblique aspects of the same projection, respectively. Also see Lee (1976). These authors write their projection formulas in terms of Jacobi elliptic functions, with a square lattice.
  87. Adams (1925)
  88. Adams (1925); Lee (1976).
  89. Rančić, Purser & Mesinger (1996); McGregor (2005).

Related Research Articles

<span class="mw-page-title-main">Arithmetic–geometric mean</span> Mathematical function of two positive real arguments

In mathematics, the arithmetic–geometric mean of two positive real numbers x and y is the mutual limit of a sequence of arithmetic means and a sequence of geometric means. The arithmetic–geometric mean is used in fast algorithms for exponential, trigonometric functions, and other special functions, as well as some mathematical constants, in particular, computing π.

In integral calculus, an elliptic integral is one of a number of related functions defined as the value of certain integrals, which were first studied by Giulio Fagnano and Leonhard Euler. Their name originates from their originally arising in connection with the problem of finding the arc length of an ellipse.

<span class="mw-page-title-main">Imaginary unit</span> Principal square root of −1

The imaginary unit or unit imaginary number is a solution to the quadratic equation x2 + 1 = 0. Although there is no real number with this property, i can be used to extend the real numbers to what are called complex numbers, using addition and multiplication. A simple example of the use of i in a complex number is 2 + 3i.

<span class="mw-page-title-main">Special unitary group</span> Group of unitary matrices with determinant of 1

In mathematics, the special unitary group of degree n, denoted SU(n), is the Lie group of n × n unitary matrices with determinant 1.

In mathematical analysis, Fubini's theorem characterizes the conditions under which it is possible to compute a double integral by using an iterated integral. It was introduced by Guido Fubini in 1907. The theorem states that if a function is Lebesgue integrable on a rectangle , then one can evaluate the double integral as an iterated integral: This formula is generally not true for the Riemann integral, but it is true if the function is continuous on the rectangle. In multivariable calculus, this weaker result is sometimes also called Fubini's theorem, although it was already known by Leonhard Euler.

<span class="mw-page-title-main">Gudermannian function</span> Mathematical function relating circular and hyperbolic functions

In mathematics, the Gudermannian function relates a hyperbolic angle measure to a circular angle measure called the gudermannian of and denoted . The Gudermannian function reveals a close relationship between the circular functions and hyperbolic functions. It was introduced in the 1760s by Johann Heinrich Lambert, and later named for Christoph Gudermann who also described the relationship between circular and hyperbolic functions in 1830. The gudermannian is sometimes called the hyperbolic amplitude as a limiting case of the Jacobi elliptic amplitude when parameter

<span class="mw-page-title-main">Inverse trigonometric functions</span> Inverse functions of sin, cos, tan, etc.

In mathematics, the inverse trigonometric functions are the inverse functions of the trigonometric functions, under suitably restricted domains. Specifically, they are the inverses of the sine, cosine, tangent, cotangent, secant, and cosecant functions, and are used to obtain an angle from any of the angle's trigonometric ratios. Inverse trigonometric functions are widely used in engineering, navigation, physics, and geometry.

<span class="mw-page-title-main">Clausen function</span> Transcendental single-variable function

In mathematics, the Clausen function, introduced by Thomas Clausen, is a transcendental, special function of a single variable. It can variously be expressed in the form of a definite integral, a trigonometric series, and various other forms. It is intimately connected with the polylogarithm, inverse tangent integral, polygamma function, Riemann zeta function, Dirichlet eta function, and Dirichlet beta function.

<span class="mw-page-title-main">Theta function</span> Special functions of several complex variables

In mathematics, theta functions are special functions of several complex variables. They show up in many topics, including Abelian varieties, moduli spaces, quadratic forms, and solitons. Theta functions are parametrized by points in a tube domain inside a complex Lagrangian Grassmannian, namely the Siegel upper half space.

In mathematics, the Jacobi elliptic functions are a set of basic elliptic functions. They are found in the description of the motion of a pendulum, as well as in the design of electronic elliptic filters. While trigonometric functions are defined with reference to a circle, the Jacobi elliptic functions are a generalization which refer to other conic sections, the ellipse in particular. The relation to trigonometric functions is contained in the notation, for example, by the matching notation for . The Jacobi elliptic functions are used more often in practical problems than the Weierstrass elliptic functions as they do not require notions of complex analysis to be defined and/or understood. They were introduced by Carl Gustav Jakob Jacobi. Carl Friedrich Gauss had already studied special Jacobi elliptic functions in 1797, the lemniscate elliptic functions in particular, but his work was published much later.

In mathematics, specifically the theory of elliptic functions, the nome is a special function that belongs to the non-elementary functions. This function is of great importance in the description of the elliptic functions, especially in the description of the modular identity of the Jacobi theta function, the Hermite elliptic transcendents and the Weber modular functions, that are used for solving equations of higher degrees.

<span class="mw-page-title-main">Lemniscate constant</span> Ratio of the perimeter of Bernoullis lemniscate to its diameter

In mathematics, the lemniscate constantϖ is a transcendental mathematical constant that is the ratio of the perimeter of Bernoulli's lemniscate to its diameter, analogous to the definition of π for the circle. Equivalently, the perimeter of the lemniscate is 2ϖ. The lemniscate constant is closely related to the lemniscate elliptic functions and approximately equal to 2.62205755. It also appears in evaluation of the gamma and beta function at certain rational values. The symbol ϖ is a cursive variant of π; see Pi § Variant pi.

In mathematics, the Rogers–Ramanujan identities are two identities related to basic hypergeometric series and integer partitions. The identities were first discovered and proved by Leonard James Rogers, and were subsequently rediscovered by Srinivasa Ramanujan some time before 1913. Ramanujan had no proof, but rediscovered Rogers's paper in 1917, and they then published a joint new proof. Issai Schur independently rediscovered and proved the identities.

atan2 Arctangent function with two arguments

In computing and mathematics, the function atan2 is the 2-argument arctangent. By definition, is the angle measure between the positive -axis and the ray from the origin to the point in the Cartesian plane. Equivalently, is the argument of the complex number

<span class="mw-page-title-main">Rogers–Ramanujan continued fraction</span> Continued fraction closely related to the Rogers–Ramanujan identities

The Rogers–Ramanujan continued fraction is a continued fraction discovered by Rogers (1894) and independently by Srinivasa Ramanujan, and closely related to the Rogers–Ramanujan identities. It can be evaluated explicitly for a broad class of values of its argument.

In statistics, the Fisher–Tippett–Gnedenko theorem is a general result in extreme value theory regarding asymptotic distribution of extreme order statistics. The maximum of a sample of iid random variables after proper renormalization can only converge in distribution to one of only 3 possible distribution families: the Gumbel distribution, the Fréchet distribution, or the Weibull distribution. Credit for the extreme value theorem and its convergence details are given to Fréchet (1927), Fisher and Tippett (1928), Mises (1936), and Gnedenko (1943).

Volume of an <i>n</i>-ball Size of a mathematical ball

In geometry, a ball is a region in a space comprising all points within a fixed distance, called the radius, from a given point; that is, it is the region enclosed by a sphere or hypersphere. An n-ball is a ball in an n-dimensional Euclidean space. The volume of a n-ball is the Lebesgue measure of this ball, which generalizes to any dimension the usual volume of a ball in 3-dimensional space. The volume of a n-ball of radius R is where is the volume of the unit n-ball, the n-ball of radius 1.

<span class="mw-page-title-main">Modular lambda function</span> Symmetric holomorphic function

In mathematics, the modular lambda function λ(τ) is a highly symmetric Holomorphic function on the complex upper half-plane. It is invariant under the fractional linear action of the congruence group Γ(2), and generates the function field of the corresponding quotient, i.e., it is a Hauptmodul for the modular curve X(2). Over any point τ, its value can be described as a cross ratio of the branch points of a ramified double cover of the projective line by the elliptic curve , where the map is defined as the quotient by the [−1] involution.

<span class="mw-page-title-main">Dixon elliptic functions</span>

In mathematics, the Dixon elliptic functions sm and cm are two elliptic functions that map from each regular hexagon in a hexagonal tiling to the whole complex plane. Because these functions satisfy the identity , as real functions they parametrize the cubic Fermat curve , just as the trigonometric functions sine and cosine parametrize the unit circle .

In mathematics, Legendre's relation can be expressed in either of two forms: as a relation between complete elliptic integrals, or as a relation between periods and quasiperiods of elliptic functions. The two forms are equivalent as the periods and quasiperiods can be expressed in terms of complete elliptic integrals. It was introduced by A. M. Legendre.

References