Hypergeometric function

Last updated
Plot of the hypergeometric function 2F1(a,b; c; z) with a=2 and b=3 and c=4 in the complex plane from -2-2i to 2+2i with colors created with Mathematica 13.1 function ComplexPlot3D Plot of the hypergeometric function 2F1(a,b; c; z) with a=2 and b=3 and c=4 in the complex plane from -2-2i to 2+2i with colors created with Mathematica 13.1 function ComplexPlot3D.svg
Plot of the hypergeometric function 2F1(a,b; c; z) with a=2 and b=3 and c=4 in the complex plane from -2-2i to 2+2i with colors created with Mathematica 13.1 function ComplexPlot3D

In mathematics, the Gaussian or ordinary hypergeometric function2F1(a,b;c;z) is a special function represented by the hypergeometric series, that includes many other special functions as specific or limiting cases. It is a solution of a second-order linear ordinary differential equation (ODE). Every second-order linear ODE with three regular singular points can be transformed into this equation.

Contents

For systematic lists of some of the many thousands of published identities involving the hypergeometric function, see the reference works by Erdélyi et al. (1953) and Olde Daalhuis (2010). There is no known system for organizing all of the identities; indeed, there is no known algorithm that can generate all identities; a number of different algorithms are known that generate different series of identities. The theory of the algorithmic discovery of identities remains an active research topic.

History

The term "hypergeometric series" was first used by John Wallis in his 1655 book Arithmetica Infinitorum.

Hypergeometric series were studied by Leonhard Euler, but the first full systematic treatment was given by Carl FriedrichGauss  ( 1813 ).

Studies in the nineteenth century included those of ErnstKummer  ( 1836 ), and the fundamental characterisation by BernhardRiemann  ( 1857 ) of the hypergeometric function by means of the differential equation it satisfies.

Riemann showed that the second-order differential equation for 2F1(z), examined in the complex plane, could be characterised (on the Riemann sphere) by its three regular singularities.

The cases where the solutions are algebraic functions were found by Hermann Schwarz (Schwarz's list).

The hypergeometric series

The hypergeometric function is defined for |z| < 1 by the power series

It is undefined (or infinite) if c equals a non-positive integer. Here (q)n is the (rising) Pochhammer symbol, which is defined by:

The series terminates if either a or b is a nonpositive integer, in which case the function reduces to a polynomial:

For complex arguments z with |z|  1 it can be analytically continued along any path in the complex plane that avoids the branch points 1 and infinity. In practice, most computer implementations of the hypergeometric function adopt a branch cut along the line z  1.

As c → −m, where m is a non-negative integer, one has 2F1(z) → ∞. Dividing by the value Γ(c) of the gamma function, we have the limit:

2F1(z) is the most common type of generalized hypergeometric series pFq, and is often designated simply F(z).

Differentiation formulas

Using the identity , it is shown that

and more generally,

Special cases

Many of the common mathematical functions can be expressed in terms of the hypergeometric function, or as limiting cases of it. Some typical examples are

When a=1 and b=c, the series reduces into a plain geometric series, i.e.

hence, the name hypergeometric. This function can be considered as a generalization of the geometric series.

The confluent hypergeometric function (or Kummer's function) can be given as a limit of the hypergeometric function

so all functions that are essentially special cases of it, such as Bessel functions, can be expressed as limits of hypergeometric functions. These include most of the commonly used functions of mathematical physics.

Legendre functions are solutions of a second order differential equation with 3 regular singular points so can be expressed in terms of the hypergeometric function in many ways, for example

Several orthogonal polynomials, including Jacobi polynomials P(α,β)
n
and their special cases Legendre polynomials, Chebyshev polynomials, Gegenbauer polynomials can be written in terms of hypergeometric functions using

Other polynomials that are special cases include Krawtchouk polynomials, Meixner polynomials, Meixner–Pollaczek polynomials.

Given , let

Then

is the modular lambda function, where

The j-invariant, a modular function, is a rational function in .

Incomplete beta functions Bx(p,q) are related by

The complete elliptic integrals K and E are given by

The hypergeometric differential equation

The hypergeometric function is a solution of Euler's hypergeometric differential equation

which has three regular singular points: 0,1 and ∞. The generalization of this equation to three arbitrary regular singular points is given by Riemann's differential equation. Any second order linear differential equation with three regular singular points can be converted to the hypergeometric differential equation by a change of variables.

Solutions at the singular points

Solutions to the hypergeometric differential equation are built out of the hypergeometric series 2F1(a,b;c;z). The equation has two linearly independent solutions. At each of the three singular points 0, 1, ∞, there are usually two special solutions of the form xs times a holomorphic function of x, where s is one of the two roots of the indicial equation and x is a local variable vanishing at a regular singular point. This gives 3 × 2 = 6 special solutions, as follows.

Around the point z = 0, two independent solutions are, if c is not a non-positive integer,

and, on condition that c is not an integer,

If c is a non-positive integer 1−m, then the first of these solutions does not exist and must be replaced by The second solution does not exist when c is an integer greater than 1, and is equal to the first solution, or its replacement, when c is any other integer. So when c is an integer, a more complicated expression must be used for a second solution, equal to the first solution multiplied by ln(z), plus another series in powers of z, involving the digamma function. See Olde Daalhuis (2010) for details.

Around z = 1, if c  a  b is not an integer, one has two independent solutions

and

Around z = ∞, if a  b is not an integer, one has two independent solutions

and

Again, when the conditions of non-integrality are not met, there exist other solutions that are more complicated.

Any 3 of the above 6 solutions satisfy a linear relation as the space of solutions is 2-dimensional, giving (6
3
) = 20 linear relations between them called connection formulas.

Kummer's 24 solutions

A second order Fuchsian equation with n singular points has a group of symmetries acting (projectively) on its solutions, isomorphic to the Coxeter group W(Dn) of order 2n−1n!. The hypergeometric equation is the case n = 3, with group of order 24 isomorphic to the symmetric group on 4 points, as first described by Kummer. The appearance of the symmetric group is accidental and has no analogue for more than 3 singular points, and it is sometimes better to think of the group as an extension of the symmetric group on 3 points (acting as permutations of the 3 singular points) by a Klein 4-group (whose elements change the signs of the differences of the exponents at an even number of singular points). Kummer's group of 24 transformations is generated by the three transformations taking a solution F(a,b;c;z) to one of

which correspond to the transpositions (12), (23), and (34) under an isomorphism with the symmetric group on 4 points 1, 2, 3, 4. (The first and third of these are actually equal to F(a,b;c;z) whereas the second is an independent solution to the differential equation.)

Applying Kummer's 24 = 6×4 transformations to the hypergeometric function gives the 6 = 2×3 solutions above corresponding to each of the 2 possible exponents at each of the 3 singular points, each of which appears 4 times because of the identities

Q-form

The hypergeometric differential equation may be brought into the Q-form

by making the substitution u = wv and eliminating the first-derivative term. One finds that

and v is given by the solution to

which is

The Q-form is significant in its relation to the Schwarzian derivative ( Hille 1976 , pp. 307–401).

Schwarz triangle maps

The Schwarz triangle maps or Schwarz s-functions are ratios of pairs of solutions.

where k is one of the points 0, 1, ∞. The notation

is also sometimes used. Note that the connection coefficients become Möbius transformations on the triangle maps.

Note that each triangle map is regular at z ∈ {0, 1, ∞} respectively, with

and

In the special case of λ, μ and ν real, with 0  λ,μ,ν < 1 then the s-maps are conformal maps of the upper half-plane H to triangles on the Riemann sphere, bounded by circular arcs. This mapping is a generalization of the Schwarz–Christoffel mapping to triangles with circular arcs. The singular points 0,1 and ∞ are sent to the triangle vertices. The angles of the triangle are πλ, πμ and πν respectively.

Furthermore, in the case of λ=1/p, μ=1/q and ν=1/r for integers p, q, r, then the triangle tiles the sphere, the complex plane or the upper half plane according to whether λ + μ + ν – 1 is positive, zero or negative; and the s-maps are inverse functions of automorphic functions for the triangle groupp, q, r = Δ(p, q, r).

Monodromy group

The monodromy of a hypergeometric equation describes how fundamental solutions change when analytically continued around paths in the z plane that return to the same point. That is, when the path winds around a singularity of 2F1, the value of the solutions at the endpoint will differ from the starting point.

Two fundamental solutions of the hypergeometric equation are related to each other by a linear transformation; thus the monodromy is a mapping (group homomorphism):

where π1 is the fundamental group. In other words, the monodromy is a two dimensional linear representation of the fundamental group. The monodromy group of the equation is the image of this map, i.e. the group generated by the monodromy matrices. The monodromy representation of the fundamental group can be computed explicitly in terms of the exponents at the singular points. [1] If (α, α'), (β, β') and (γ,γ') are the exponents at 0, 1 and ∞, then, taking z0 near 0, the loops around 0 and 1 have monodromy matrices

where

If 1−a, cab, ab are non-integer rational numbers with denominators k,l,m then the monodromy group is finite if and only if , see Schwarz's list or Kovacic's algorithm.

Integral formulas

Euler type

If B is the beta function then

provided that z is not a real number such that it is greater than or equal to 1. This can be proved by expanding (1  zx)a using the binomial theorem and then integrating term by term for z with absolute value smaller than 1, and by analytic continuation elsewhere. When z is a real number greater than or equal to 1, analytic continuation must be used, because (1  zx) is zero at some point in the support of the integral, so the value of the integral may be ill-defined. This was given by Euler in 1748 and implies Euler's and Pfaff's hypergeometric transformations.

Other representations, corresponding to other branches, are given by taking the same integrand, but taking the path of integration to be a closed Pochhammer cycle enclosing the singularities in various orders. Such paths correspond to the monodromy action.

Barnes integral

Barnes used the theory of residues to evaluate the Barnes integral

as

where the contour is drawn to separate the poles 0, 1, 2... from the poles −a, −a  1, ..., −b, −b  1, ... . This is valid as long as z is not a nonnegative real number.

John transform

The Gauss hypergeometric function can be written as a John transform ( Gelfand, Gindikin & Graev 2003 , 2.1.2).

Gauss' contiguous relations

The six functions

are called contiguous to 2F1(a, b; c; z). Gauss showed that 2F1(a, b; c; z) can be written as a linear combination of any two of its contiguous functions, with rational coefficients in terms of a, b, c, and z. This gives

relations, given by identifying any two lines on the right hand side of

where F = 2F1(a, b; c; z), F(a+) = 2F1(a + 1, b; c; z), and so on. Repeatedly applying these relations gives a linear relation over C(z) between any three functions of the form

where m, n, and l are integers.

Gauss' continued fraction

Gauss used the contiguous relations to give several ways to write a quotient of two hypergeometric functions as a continued fraction, for example:

Transformation formulas

Transformation formulas relate two hypergeometric functions at different values of the argument z.

Fractional linear transformations

Euler's transformation is

It follows by combining the two Pfaff transformations

which in turn follow from Euler's integral representation. For extension of Euler's first and second transformations, see Rathie & Paris (2007) and Rakha & Rathie (2011). It can also be written as linear combination

Quadratic transformations

If two of the numbers 1  c, c  1, a  b, b  a, a + b  c, c  a  b are equal or one of them is 1/2 then there is a quadratic transformation of the hypergeometric function, connecting it to a different value of z related by a quadratic equation. The first examples were given by Kummer (1836), and a complete list was given by Goursat (1881). A typical example is

Higher order transformations

If 1−c, ab, a+bc differ by signs or two of them are 1/3 or −1/3 then there is a cubic transformation of the hypergeometric function, connecting it to a different value of z related by a cubic equation. The first examples were given by Goursat (1881). A typical example is

There are also some transformations of degree 4 and 6. Transformations of other degrees only exist if a, b, and c are certain rational numbers ( Vidunas 2005 ). For example,

Values at special points z

See Slater (1966 , Appendix III) for a list of summation formulas at special points, most of which also appear in Bailey (1935). Gessel & Stanton (1982) gives further evaluations at more points. Koepf (1995) shows how most of these identities can be verified by computer algorithms.

Special values at z = 1

Gauss's summation theorem, named for Carl Friedrich Gauss, is the identity

which follows from Euler's integral formula by putting z = 1. It includes the Vandermonde identity as a special case.

For the special case where ,

Dougall's formula generalizes this to the bilateral hypergeometric series at z = 1.

Kummer's theorem (z = −1)

There are many cases where hypergeometric functions can be evaluated at z = −1 by using a quadratic transformation to change z = −1 to z = 1 and then using Gauss's theorem to evaluate the result. A typical example is Kummer's theorem, named for Ernst Kummer:

which follows from Kummer's quadratic transformations

and Gauss's theorem by putting z = −1 in the first identity. For generalization of Kummer's summation, see Lavoie, Grondin & Rathie (1996).

Values at z = 1/2

Gauss's second summation theorem is

Bailey's theorem is

For generalizations of Gauss's second summation theorem and Bailey's summation theorem, see Lavoie, Grondin & Rathie (1996).

Other points

There are many other formulas giving the hypergeometric function as an algebraic number at special rational values of the parameters, some of which are listed in Gessel & Stanton (1982) and Koepf (1995). Some typical examples are given by

which can be restated as

whenever −π < x < π and T is the (generalized) Chebyshev polynomial.

See also

Related Research Articles

<span class="mw-page-title-main">Generalized hypergeometric function</span> Family of power series in mathematics

In mathematics, a generalized hypergeometric series is a power series in which the ratio of successive coefficients indexed by n is a rational function of n. The series, if convergent, defines a generalized hypergeometric function, which may then be defined over a wider domain of the argument by analytic continuation. The generalized hypergeometric series is sometimes just called the hypergeometric series, though this term also sometimes just refers to the Gaussian hypergeometric series. Generalized hypergeometric functions include the (Gaussian) hypergeometric function and the confluent hypergeometric function as special cases, which in turn have many particular special functions as special cases, such as elementary functions, Bessel functions, and the classical orthogonal polynomials.

<span class="mw-page-title-main">Stable distribution</span> Distribution of variables which satisfies a stability property under linear combinations

In probability theory, a distribution is said to be stable if a linear combination of two independent random variables with this distribution has the same distribution, up to location and scale parameters. A random variable is said to be stable if its distribution is stable. The stable distribution family is also sometimes referred to as the Lévy alpha-stable distribution, after Paul Lévy, the first mathematician to have studied it.

<span class="mw-page-title-main">Confluent hypergeometric function</span> Solution of a confluent hypergeometric equation

In mathematics, a confluent hypergeometric function is a solution of a confluent hypergeometric equation, which is a degenerate form of a hypergeometric differential equation where two of the three regular singularities merge into an irregular singularity. The term confluent refers to the merging of singular points of families of differential equations; confluere is Latin for "to flow together". There are several common standard forms of confluent hypergeometric functions:

<span class="mw-page-title-main">Mittag-Leffler function</span> Mathematical function

In mathematics, the Mittag-Leffler function is a special function, a complex function which depends on two complex parameters and . It may be defined by the following series when the real part of is strictly positive:

<span class="mw-page-title-main">Inverse-gamma distribution</span> Two-parameter family of continuous probability distributions

In probability theory and statistics, the inverse gamma distribution is a two-parameter family of continuous probability distributions on the positive real line, which is the distribution of the reciprocal of a variable distributed according to the gamma distribution.

<span class="mw-page-title-main">Parabolic cylinder function</span>

In mathematics, the parabolic cylinder functions are special functions defined as solutions to the differential equation

In mathematics, Riemann's differential equation, named after Bernhard Riemann, is a generalization of the hypergeometric differential equation, allowing the regular singular points to occur anywhere on the Riemann sphere, rather than merely at 0, 1, and . The equation is also known as the Papperitz equation.

<span class="mw-page-title-main">Duffing equation</span> Non-linear second order differential equation and its attractor

The Duffing equation, named after Georg Duffing (1861–1944), is a non-linear second-order differential equation used to model certain damped and driven oscillators. The equation is given by

A theoretical motivation for general relativity, including the motivation for the geodesic equation and the Einstein field equation, can be obtained from special relativity by examining the dynamics of particles in circular orbits about the Earth. A key advantage in examining circular orbits is that it is possible to know the solution of the Einstein Field Equation a priori. This provides a means to inform and verify the formalism.

<span class="mw-page-title-main">Meijer G-function</span> Generalization of the hypergeometric function

In mathematics, the G-function was introduced by Cornelis Simon Meijer (1936) as a very general function intended to include most of the known special functions as particular cases. This was not the only attempt of its kind: the generalized hypergeometric function and the MacRobert E-function had the same aim, but Meijer's G-function was able to include those as particular cases as well. The first definition was made by Meijer using a series; nowadays the accepted and more general definition is via a line integral in the complex plane, introduced in its full generality by Arthur Erdélyi in 1953.

<span class="mw-page-title-main">Mathematical descriptions of the electromagnetic field</span> Formulations of electromagnetism

There are various mathematical descriptions of the electromagnetic field that are used in the study of electromagnetism, one of the four fundamental interactions of nature. In this article, several approaches are discussed, although the equations are in terms of electric and magnetic fields, potentials, and charges with currents, generally speaking.

A ratio distribution is a probability distribution constructed as the distribution of the ratio of random variables having two other known distributions. Given two random variables X and Y, the distribution of the random variable Z that is formed as the ratio Z = X/Y is a ratio distribution.

<span class="mw-page-title-main">Struve function</span>

In mathematics, the Struve functionsHα(x), are solutions y(x) of the non-homogeneous Bessel's differential equation:

In the following we solve the second-order differential equation called the hypergeometric differential equation using Frobenius method, named after Ferdinand Georg Frobenius. This is a method that uses the series solution for a differential equation, where we assume the solution takes the form of a series. This is usually the method we use for complicated ordinary differential equations.

<span class="mw-page-title-main">Fox H-function</span> Generalization of the Meijer G-function and the Fox–Wright function

In mathematics, the Fox H-functionH(x) is a generalization of the Meijer G-function and the Fox–Wright function introduced by Charles Fox (1961). It is defined by a Mellin–Barnes integral

A product distribution is a probability distribution constructed as the distribution of the product of random variables having two other known distributions. Given two statistically independent random variables X and Y, the distribution of the random variable Z that is formed as the product is a product distribution.

<span class="mw-page-title-main">Jacobi polynomials</span> Polynomial sequence

In mathematics, Jacobi polynomials are a class of classical orthogonal polynomials. They are orthogonal with respect to the weight on the interval . The Gegenbauer polynomials, and thus also the Legendre, Zernike and Chebyshev polynomials, are special cases of the Jacobi polynomials.

In mathematics, the Fox–Wright function (also known as Fox–Wright Psi function, not to be confused with Wright Omega function) is a generalisation of the generalised hypergeometric function pFq(z) based on ideas of Charles Fox (1928) and E. Maitland Wright (1935):

<span class="mw-page-title-main">Schwarz triangle function</span> Conformal mappings in complex analysis

In complex analysis, the Schwarz triangle function or Schwarz s-function is a function that conformally maps the upper half plane to a triangle in the upper half plane having lines or circular arcs for edges. The target triangle is not necessarily a Schwarz triangle, although that is the most mathematically interesting case. When that triangle is a non-overlapping Schwarz triangle, i.e. a Möbius triangle, the inverse of the Schwarz triangle function is a single-valued automorphic function for that triangle's triangle group. More specifically, it is a modular function.

References

  1. Ince 1944 , pp. 393–393