Optimum HDTV viewing distance is the distance that provides the viewer with the optimum immersive visual HDTV experience.
HDTV is designed to provide an experience more realistic than the television system it is designed to replace. [1] The "thrilling realism" [2] HDTV attempts to offer arises from increased resolution (detail) and the typically large screen sizes. A larger display increases the visual angle at which content is viewed, both of which contribute to an increased feeling of presence. [3] [4] Thus, the correct viewing distance is critical to the enjoyment of HDTV as it is intended. While helping to define the HDTV standard, RCA engineer and member of the US delegation to the International Telecommunication Union-Radiocommunication Sector (ITU-R), Bernard J. Lechner, made an early analysis of viewing distance, deriving the so-called Lechner distance. This approach, based on the limits of the human eye, can be used for all resolutions (including future resolutions). This is the " optimal viewing distance" found in the ITU-R. [5]
The concept of presence has been described as the sensation of "reality", of "being there", and as "an illusion of non mediation". [3] The concept of presence originated and was studied with regard to virtual reality (VR) and other 3D environments. It was later established that television viewers could also experience a feeling of presence. [3] Presence is influenced by a number of factors, including video camera techniques, audio fidelity, visual and aural dimensionality, and most relevantly to this topic, image size (visual angle) and quality (angular resolution). [6] [7]
The optimum viewing distance is affected by the horizontal angle of the camera capturing the image. One concept of an ideal viewing distance places the viewer where the horizontal angle subtended by the screen is the same as the horizontal angle captured by the camera. If this is the case, the angular relationships perceived by the viewer would be identical to those recorded by the camera. A mismatch in this regard is traditionally disregarded, but some rotating motions can make these distortions very noticeable as a pincushion effect. This is likely in 3D video games, so gamers are likely to adopt close viewing positions matched to a game's fixed field of view.
If the camera's angle were always the same, an ideal viewing distance could be easily calculated. However, the camera's horizontal angle varies as the focal length of its lens changes. If the camera's sensor has fixed dimensions, a shorter focal length (wide angle) lens captures a wider angle of view, requiring the viewer to sit closer to the screen. Conversely, a longer focal length (telephoto) lens captures a narrower angle of view, demanding a more distant viewer position.
Such opposing viewing distances would not only be impractical, but would negate the very purposes of telephoto shots (for example, to see a distant object in more detail, or minimize distortion in facial images) and wide-angle shots (causing the viewer to sit too close to the screen, where undesirable image artifacts would be visible).
One compromise assumes the lens is "standard" (a 50 mm focal length, for a standard 35 mm format). A "standard" lens preserves the same spatial relationships perceived by a spectator at the camera location. For a "standard" lens image, viewing distance should be equal to the diagonal length of the screen.
It has been demonstrated that viewing a display that occupies a greater visual angle (also referred to as field of view) increases the feeling of presence. [6] More importantly, the wider the visual angle (up to a plateau at approximately 80 degrees), the greater the feeling of presence. [8] [9]
With printed graphics, resolution refers to the number of pixels (usually referred to as "dots") in a fixed linear measurement. [10] With HDTV, resolution is measured in terms of the number of pixels in the physical display. [8] When the resolution of a printed image is increased, the image is cleaner, crisper and more detailed. [10] However, image quality does not improve if the increase in resolution exceeds the observer's visual capabilities. For an HDTV's image to noticeably improve, its resolution per degree of arc (or angular resolution) must increase as well as the pixel count of the display. [8]
To maximize the feeling of presence and thus provide a better viewing experience, the viewer would need to be situated at the theoretical spot where the HDTV occupies the widest view angle for that viewer[ dubious – discuss ]. It is also important that the resolution of the display per degree of arc remain at a high quality level. [11] Opinions regarding where the ideal position lies are numerous and varied.
Recommendations on HDTV viewing distances fall into two general classes; a fixed distance based on HDTV display size, or a range of distances based on the display size. The most common recommendations from reasonably authoritative sources are presented below.
Fixed distance recommendations are the more common of the two types. For the most part, the majority of the fixed distance recommendations were issued before the end of 2007, when arguably HDTV displays were still in the early adoption phase. [12] [13] The concept of optimal viewing distance, [5] which is based on physics and physiology, has become essential with the advent of UHD (Ultra High Definition) technology. This new technology allows for much shorter viewing distances, which requires greater precision.
The "optimal viewing distance" [5] is based on the limits of the human eye, i.e. its angle of resolution. This is its ability to distinguish between two pixels. For normal visual acuity (6/6 vision), this angle is 1 arcmin. To obtain a fixed distance for a given resolution, it must be expressed in picture heights (H). [5] If a screen is 50 cm high and it is at a distance of 250 cm, then in picture heights, its distance is 5 H (250/50). Mathematically, this gives the distances shown in the following table:
Resolution | Opti. Dist. | |
---|---|---|
NTSC | (640) × 480 | 7.2 H |
PAL SECAM | (720) × 576 | 6.0 H |
HD 720 | 1280 × 720 | 4.8 H |
HD 1080 | 1920 × 1080 | 3.2 H |
4K UHD | 3840 × 2160 | 1.6 H |
8K UHD | 7680 × 4320 | 0.8 H |
This table can be used in a number of ways :
Please note! The optimal viewing distance is not suitable for designing a user interface; It is the distance actually observed in households that should be used. It is much greater than the optimal viewing distance and highly variable. [15]
One of the more popular recommendations on the proper HDTV viewing distance is multiply the diagonal measurement of the display screen by 2.5. This recommendation is cited by television manufacturers, [16] retailers, [17] respected publications [18] [19] and websites, [20] though the popular electronics review website CNET suggests that high-resolution content can be watched at a closer distance – 1.5 times the display screen's diagonal measurement (corresponding to 32 degree viewing angle). [21]
Viewing an HDTV from a position where the display occupies a 30-degree field of view is widely quoted as the SMPTE (or SMPTE 30) recommendation (equivalent to about 1.6264 times the screen size in a 16:9 TV). This recommendation is very popular with the home theater enthusiast community, [22] [23] appears in books on home theater design, [24] and is also supported by a white paper produced by Fujitsu. [25] Although an article on research into setting the specification for the next evolution of HDTV, Ultra HDTV (or UHDTV), does support the premise that HDTV was optimized for a view angle of 30 degrees, [8] there seems to be no direct recommendation from SMPTE on the issue.
THX recommends that the "best seat-to-screen distance" is one where the view angle approximates 40 degrees, [26] (the actual angle is 40.04 degrees). [27] Their recommendation was originally presented at the 2006 CES show, and was stated as being the theoretical maximum horizontal view angle, based on average human vision. [28] In the opinion of THX, the location where the display is viewed at a 40-degree view angle provides the most "immersive cinematic experience", [26] all else being equal. For consumer application of their recommendations, THX recommends dividing the diagonal screen measurement by .84 to calculate the optimum viewing distance, for a 1080p resolution. This equates to multiplying the diagonal measurement by about 1.2. [26]
This article's tone or style may not reflect the encyclopedic tone used on Wikipedia.(June 2011) |
Stating optimum viewing distance as a range rather than as fixed distance is on the rise; possibly because of changes in the profile of the typical HDTV purchaser. Early adopters of HDTV were typically videophiles, [29] the technically adventurous [30] and the sports enthusiast [31] looking to have the ultimate viewing experience. Today, the typical HDTV consumer's aims may be a little more modest; total immersion takes a back seat to room integration. [32] [33] Major retail chains like Best Buy that once stated their recommendation as a fixed distance, [17] are starting to provide range recommendations. [34] Manufacturers have also started to provide range recommendations, updating their websites with small applications that denote the optimum viewing distance as a range of distances. [35] [36] [37] THX in March 2009 added range recommendations to their website. [26] The minimum of the range tends to be the proponent's fixed optimum distance recommendation.
Range recommendations from manufacturers are the most modest of the groupings. For the minimum (or nearest) viewing distance, they recommend a view angle of approximately 31 degrees; and for the maximum, a view angle as low as 10 degrees. [35] [36] A 10-degree view angle is approximately the angle that NTSC television was typically viewed from. [38]
|
|
The recommendations currently posted on the websites of retailers Best Buy and Crutchfield take more of a middle ground. Both retailers post a minimum viewing distance that accommodates a view angle of just a little over 32 degrees on average. [34] [40] This viewing distance approximates the view angle needed to be able to see pixel level detail. The maximum viewing distance will provide a viewing angle of approximately 16 degrees with Best Buy's recommendation and approximately 20 degrees with Crutchfield's. The maximum viewing distance (minimum viewing angle) provided by Best Buy aligns with vision theory on the highest spatial frequencies perceivable by the human visual system. [41] Crutchfield's maximum viewing distance aligns with the lower boundaries where viewers typically begin to find HDTV immersive. [8]
|
|
While THX still contends that the optimum viewing distance is a position where the display occupies a 40-degree view angle for the viewer, they too provide a range recommendation. The minimum viewing distance is set to approximate a 40-degree view angle, and the maximum viewing distance is set to approximate 28 degrees. [26]
Screen Size | Recommended Range |
---|---|
35" | 3.5' – 5.0' (1.0 – 1.5 m) |
40" | 4.0' – 6.0' (1.2 – 1.8 m) |
50" | 5' – 7.5' (1.5 – 2.2 m) |
60" | 6.0' – 9.0' (1.8 – 2.7 m) |
Consideration should also be given to the height at which the screen is placed. A common suggestion is that the viewer's eyes are horizontally level with the bottom or middle of the display, so that the screen does not overpower the viewer. THX recommends that a viewer should not have to look up more than 15 degrees. [42]
Each recommendation serves the underlying goal of the organization that proposes it. Manufacturers will have an easier time selling their HDTVs if they support a position that does not require consumers to purchase as large a set as required by the THX recommendations. In the absence of economic influences, calculating the best screen-size-to-distance ratio that will produce the utmost feeling of presence is not at all straightforward.
There are a number of factors that can affect the calculation including the limitations of the human visual system, [8] the technological limitations of HDTV displays, [11] human physiological considerations, [8] the content that will be viewed, [6] and the interpretation of empirical data from formal testing. There is also the fact that the screen image is on a flat plane and not curved. Perhaps the biggest of these are uncertainties surrounding the limits of the human visual system, and how those limitations apply to what we see and perceive. A further, more practical consideration, is one of room size, including the position of speakers, seating and other furniture in the room.
The human visual system has a fixed capacity to detect detail from a distance. Our understanding of limitations with regard to visual detail recognition and identification from a distance is primarily based on the work of Dr. Hermann Snellen. Dr. Snellen developed the eye examination chart that bears his name (Snellen chart). From his findings and the work of others over the last hundred years, one arcminute is seen as the threshold beyond which critical detail cannot be identified [43] by a person with normal vision. [44] [45] [46] An arcminute is an angular measurement, which is equal to 1/60 of one degree of a circle.
Normal vision is referenced as 20/20 or 6/6 vision in North America and Europe respectively. [46] [47] The visual acuity threshold has been identified as a constraint factor in the recommendations on the optimum viewing distance for HDTV, [38] and also in formal research that comment on the subject of television and angular resolution. [11] [48] [49] [50] Assuming display is flat, with 1 arcminute as the constraint for seeing critical detail, in order not to miss any detail a viewer would need to be situated at a position where their view angle to a 1080p HDTV is approximately 31.2 degrees or greater (32 degrees for spherical display), for 2160p HDTV approximately 58.37 degrees or greater (64 degrees for spherical display) and for 4320p HDTV approximately 96.33 degrees or greater (128 degrees for spherical display). [11] [27] However, there is not always agreement that the Snellenian limit should be the constraining factor.
To calculate the viewing distance, based on display size and content resolution, the following formula may be used:
| Example for DVD video on a 32-inch 1080p HDTV: (inches) Example for high-def video on a 32-inch 1080p HDTV: (inches) |
Sitting beyond these distances will result in a loss of detail.
A 1998 Sun Microsystems paper on the limits of human vision and video display systems uses a different constraint value of approximately 1⁄2 an arc minute (or 30 arc seconds), when estimating the saturation point for the human visual system. [41] With 30 arc seconds as the constraint, the view angle necessary to see all the detail provided by an HDTV with a 1080p resolution drops to approximately 16.1 degrees. Furthermore, several academic articles have challenged the notion that 1 arcminute of resolution is the typical resolving power of the human eye, suggesting that on average, we can resolve detail smaller than that. [47] [51]
Also, there is the issue of vernier acuity, which is the eye's ability to detect an offset between 2 lines and stereoacuity, which is the ability to discriminate depth by the use of both eyes. Vernier acuity and stereoacuity are cited as being detected with only a 2–4 arc second degree of separation. [52] Ultimately all of the various types of acuity play a part in how we see things and more importantly, how we perceive what we are witnessing. The complexities of the human visual system and the relationship between different types of acuity are not yet fully understood. [52] Thus, depending on which human visual system constraints are applied, viewing angles calculations will vary to some degree, especially when technological constraints are factored in.
While viewing an HDTV display from a shorter distance can produce an increased sense of presence, the limitations of technology can have an adverse effect if the viewer is too close to the display. If you examine an LCD or plasma HDTV display when it is turned off, you can see the construction of the pixel grid. Turning the display on doesn't completely mask this. If you are too close to the display when it is on, it can look as though you're viewing it through a screen door. [49] [53] Even with different HDTV display technology, such as front or rear projection DLP, LCoS or laser TV, the way HDTV images are rendered limits how close a viewer can be before the image's segmented nature becomes evident.
HDTV displays produce images the same way computer bitmaps (also known as raster graphics) are produced, using a mosaic of colored 4-sided pixels. Like computer monitors, each HDTV display has a video resolution consisting of rows and columns of specific numbers of pixels. From far enough away, the human eye perceives the illuminated pixels as a smooth image. [10] As one gets closer, a point occurs where the blocky appearance of individual pixels becomes apparent. [11] The image then loses its smoothness, its perceived quality drops, and the advantage of closer viewing becomes a disadvantage.
Calculating the point where the human eye can detect pixels is not straightforward. Obviously, people's visual acuity varies greatly. But pixel geometry varies as well, in shape and spacing (known as interpixel gap [38] ), depending on a display's technology and design.
Research conducted on presence with HDTV and other higher resolution formats that use a wide field display, has revealed that sometimes the feeling of presence can be too real, producing physiological effect that some viewers may find undesirable. Subjects have reported experiencing an increase in symptoms that are common to motion sickness when viewing strong visual stimuli on large screens. [8] A study conducted using virtual reality simulation as part of the experiment, found that subjects with lower visual acuity experienced significantly more of the symptoms associated with motion sickness.
Furthermore, the study also found that the symptoms of motion sickness increased when subjects observed the visual stimuli without the aid of their glass or contact lenses. [54] Consequently, optimum viewing distance recommendations based solely on human visual system and technological limitations may not always produce the best viewing experience. Viewers with lower visual acuity, who prefer to watch HDTV without their corrective lenses may want to sit closer to see critical details and run the risk of undesirable side effects.
Although studies show the feeling of presence and image size are directly correlated, calculating the size to viewing distance relationship may not be a necessary exercise for all consumers. A 1997 study, which hypothesized that increases in screen size would give rise to increased feelings of presence, found that the content was more important than the screen size. The findings were that for commercials, action-adventure and reality programming an increase in the feeling of presence did correlate with increased size. The researcher attributed these findings to the fact that the aforementioned content contained scenes that were shot with a point of view camera, scenes with sudden movements and shorter shots. Conversely, for programming consisting of talk shows and drama programs changing the screen size had no effect on the feeling of presence. [55]
A computer monitor is an output device that displays information in pictorial or textual form. A discrete monitor comprises a visual display, support electronics, power supply, housing, electrical connectors, and external user controls.
A plasma display panel is a type of flat-panel display that uses small cells containing plasma: ionized gas that responds to electric fields. Plasma televisions were the first large flat-panel displays to be released to the public.
A home cinema, also called a home theater or theater room, is a home entertainment audio-visual system that seeks to reproduce a movie theater experience and mood using consumer electronics-grade video and audio equipment and is set up in a room or backyard of a private home. Some studies show that films are rated better and generate more intense emotions when watched in a movie theater, but convenience is a major appeal for home cinemas. In the 1980s, home cinemas typically consisted of a movie pre-recorded on a LaserDisc or VHS tape; a LaserDisc Player or VCR; and a heavy, bulky large-screen cathode-ray tube TV set, although sometimes CRT projectors were used instead. In the 2000s, technological innovations in sound systems, video player equipment, TV screens and video projectors have changed the equipment used in home cinema set-ups and enabled home users to experience a higher-resolution screen image, improved sound quality and components that offer users more options. The development of Internet-based subscription services means that 2020s-era home theatre users do not have to commute to a video rental store as was common in the 1980s and 1990s.
The field of view (FOV) is the angular extent of the observable world that is seen at any given moment. In the case of optical instruments or sensors, it is a solid angle through which a detector is sensitive to electromagnetic radiation. It is further relevant in photography.
On 2D displays, such as computer monitors and TVs, display size or viewable image size (VIS) refers to the physical size of the area where pictures and videos are displayed. The size of a screen is usually described by the length of its diagonal, which is the distance between opposite corners, typically measured in inches. It is also sometimes called the physical image size to distinguish it from the "logical image size," which describes a screen's display resolution and is measured in pixels.
The display resolution or display modes of a digital television, computer monitor, or other display device is the number of distinct pixels in each dimension that can be displayed. It can be an ambiguous term especially as the displayed resolution is controlled by different factors in cathode-ray tube (CRT) displays, flat-panel displays and projection displays using fixed picture-element (pixel) arrays.
Pixels per inch (ppi) and pixels per centimetre are measurements of the pixel density of an electronic image device, such as a computer monitor or television display, or image digitizing device such as a camera or image scanner. Horizontal and vertical density are usually the same, as most devices have square pixels, but differ on devices that have non-square pixels. Pixel density is not the same as resolution — where the former describes the amount of detail on a physical surface or device, the latter describes the amount of pixel information regardless of its scale. Considered in another way, a pixel has no inherent size or unit, but when it is printed, displayed, or scanned, then the pixel has both a physical size (dimension) and a pixel density (ppi).
Visual acuity (VA) commonly refers to the clarity of vision, but technically rates an animal's ability to recognize small details with precision. Visual acuity depends on optical and neural factors. Optical factors of the eye influence the sharpness of an image on its retina. Neural factors include the health and functioning of the retina, of the neural pathways to the brain, and of the interpretative faculty of the brain.
A head-mounted display (HMD) is a display device, worn on the head or as part of a helmet, that has a small display optic in front of one or each eye. HMDs have many uses including gaming, aviation, engineering, and medicine.
Autostereoscopy is any method of displaying stereoscopic images without the use of special headgear, glasses, something that affects vision, or anything for eyes on the part of the viewer. Because headgear is not required, it is also called "glasses-free 3D" or "glassesless 3D".
Contrast is the difference in luminance or color that makes an object visible against a background of different luminance or color. The human visual system is more sensitive to contrast than to absolute luminance; thus, we can perceive the world similarly despite significant changes in illumination throughout the day or across different locations.
A parallax barrier is a device placed in front of an image source, such as a liquid crystal display, to allow it to show a stereoscopic or multiscopic image without the need for the viewer to wear 3D glasses. Placed in front of the normal LCD, it consists of an opaque layer with a series of precisely spaced slits, allowing each eye to see a different set of pixels, so creating a sense of depth through parallax in an effect similar to what lenticular printing produces for printed products and lenticular lenses for other displays. A disadvantage of the method in its simplest form is that the viewer must be positioned in a well-defined spot to experience the 3D effect. However, recent versions of this technology have addressed this issue by using face-tracking to adjust the relative positions of the pixels and barrier slits according to the location of the user's eyes, allowing the user to experience the 3D from a wide range of positions. Another disadvantage is that the horizontal pixel count viewable by each eye is halved, reducing the overall horizontal resolution of the image.
Laser color television, or laser color video display, is a type of television that utilizes two or more individually modulated optical (laser) rays of different colors to produce a combined spot that is scanned and projected across the image plane by a polygon-mirror system or less effectively by optoelectronic means to produce a color-television display. The systems work either by scanning the entire picture a dot at a time and modulating the laser directly at high frequency, much like the electron beams in a cathode ray tube, or by optically spreading and then modulating the laser and scanning a line at a time, the line itself being modulated in much the same way as with digital light processing (DLP).
Large-screen television technology developed rapidly in the late 1990s and 2000s. Prior to the development of thin-screen technologies, rear-projection television was standard for larger displays, and jumbotron, a non-projection video display technology, was used at stadiums and concerts. Various thin-screen technologies are being developed, but only liquid crystal display (LCD), plasma display (PDP) and Digital Light Processing (DLP) have been publicly released. Recent technologies like organic light-emitting diode (OLED) as well as not-yet-released technologies like surface-conduction electron-emitter display (SED) or field-emission display (FED) are in development to supersede earlier flat-screen technologies in picture quality.
Bernard J. Lechner was an electronics engineer and formerly vice president, RCA Laboratories, where he worked for 30 years covering various aspects of television and information display technologies.
"21:9" is a consumer electronics (CE) marketing term to describe the ultrawide aspect ratio of 64:27, designed to show films recorded in CinemaScope and equivalent modern anamorphic formats. The main benefit of this screen aspect ratio is a constant display height when displaying other content with a lesser aspect ratio.
Retina display is a branded series of LCDs and OLED displays by Apple Inc. that have a higher pixel density than traditional displays. Apple has registered the term "Retina" as a trademark with regard to computers and mobile devices with the United States Patent and Trademark Office and Canadian Intellectual Property Office. The applications were approved in 2012 and 2014 respectively. The Canadian application cited a 2010 application in Jamaica.
A display resolution standard is a commonly used width and height dimension of an electronic visual display device, measured in pixels. This information is used for electronic devices such as a computer monitor. Certain combinations of width and height are standardized and typically given a name and an initialism which is descriptive of its dimensions.
In first person video games, the field of view or field of vision is the extent of the observable game world that is seen on the display at any given moment. It is typically measured as an angle, although whether this angle is the horizontal, vertical, or diagonal component of the field of view varies from game to game.
ZPEG is a motion video technology that applies a human visual acuity model to a decorrelated transform-domain space, thereby optimally reducing the redundancies in motion video by removing the subjectively imperceptible. This technology is applicable to a wide range of video processing problems such as video optimization, real-time motion video compression, subjective quality monitoring, and format conversion.