Steel industry in Nigeria

Last updated

Iron and steel industry in Nigeria developed as a public funded integral industry. Between 1979 and 1983, Nigeria government jump started iron and steel production with emphasis on the importance of iron and steel in developing and driving local production of goods. A strong iron and steel industry was also projected to reduce demand of foreign currency used towards the importation of steel products. [1]

Contents

History

The iron and steel industry in Nigeria started by government intervention through the construction of various steel rolling mills. After iron ore deposits were discovered in old Kwara State in the 1950s, the Nigerian First Republic government began active planning and mapping of strategies for local production of iron rods and steel. However, many proposals presented by foreign companies were less enthused on steel production due to concerns about local technical know how and market demand. But in 1967, a technical group from the Soviet Union proposed the use of direct blast furnace process as a viable method of production in the country. Further exploration of iron ore deposits by Soviet firm Technopromexport yielded commercial quantities around the Itakpe region of present Kogi State. In 1971, a Nigeria steel development authority was created to design plans for iron and steel projects and train students in iron and steel making.

In 1979, the Nigerian government signed an agreement with soviet group Technopromexport for the construction of a steel plant in Ajaokuta.

Steel making infrastructure reached an advanced stage in 1982 with the commissioning of Aladja Steel complex, the first phase was built at a total cost of 922 million naira. The factory's process utilized electric arc furnace steel making technology. The mill was planned to produce finished billets more than it could process into wire or iron rods. The remainder of the billets were distributed to three rolling mills in Jos, Osogbo, Katsina, these mills then produced rods between 6mm and 40mm. The production capacity of the rollings mills were divided into phases, the first phase with an estimated hourly production of 80 tonnes of finished products was 210,000 tonnes per year, a second phase projected a production rate of 420,000 tonnes per year and a final phase production of 720,000 tonnes per year

Katsina rolling mills

Katsina rolling mills was constructed by Kobe Steel of Japan. One of the Nigerian project coordinators was Mahmud Kanti Bello who later became a senator of the Federal Republic of Nigeria. Upon completion, the country agreed to a 36 months technical assistance programme with Kobe to train Nigerian employees. The mill produced plain and ribbed rods between 6mm to 40mm in diameter and the finished products were primarily associated with wire industries. [2]

Jos steel rolling mill

The rolling mill in Jos was constructed by a consortium of German firms; Mannesmann Demag, AEG Telefunken, Ofenbau Union and Bilfinger + Berger.

Osogbo steel rolling mill

The mill was commissioned on April 30, 1983. The construction phase was handled by a consortium of Eisenbau Essen, Schloemann Siemag, Strabag and MFB Ferrostal. The government and the builders signed a technical assistance programme to train workers who will later takeover daily operations of the mill. The steel mill complex also had housing facilities for select worker within the complex.

Related Research Articles

Steel mill Plant for steelmaking

A steel mill or steelworks is an industrial plant for the manufacture of steel. It may be an integrated steel works carrying out all steps of steelmaking from smelting iron ore to rolled product, but may also be a plant where steel semi-finished casting products are made from molten pig iron or from scrap.

Ironworks

An ironworks or iron works is an industrial plant where iron is smelted and where heavy iron and steel products are made. The term is both singular and plural, i.e. the singular of ironworks is ironworks.

ArcelorMittal Kryvyi Rih Ukraines largest steel company, located in Kryvyi Rih

ArcelorMittal Kryvyi Rih (former Kryvorizhstal is Ukraine's largest integrated steel company located in Kryvyi Rih city.

Pakistan Steel Mills Steel production company based in Pakistan

The Pakistan Steel Mills Corporation, colloquially referred to as Pak Steels, is a Pakistan-based company that produces long-rolled steel and heavy metal products in the country.

Semi-finished casting products are intermediate castings produced in a steel mill that need further processing before being finished goods. There are four types: ingots, blooms, billets, and slabs.

IISCO Steel Plant of Steel Authority of India Limited is an integrated steel plant located at Burnpur, a neighbourhood in Asansol city, in the Asansol subdivision of Paschim Bardhaman district, West Bengal, India.

The Park Gate Iron and Steel Company was a British company that smelted iron ore and turned it into rolled steel and semi-finished casting products. Its works was at Parkgate, South Yorkshire on a triangular site bounded on two sides by the main road between Rotherham and Barnsley (A633) and the North Midland Railway main line between Rotherham Masborough and Cudworth. It also operated ironstone quarries in Northamptonshire and Leicestershire.

Kemaman Port is a major seaport located on the east coast of Malaysia in the state of Terengganu. Chukai is a major town which is located near the port and serves as the district capital of Kemaman.

Mobarakeh Steel Company Iranian steel manufacturing corporation

Mobarakeh Steel Company is an Iranian steel company, located 65 km south west of Esfahan, near the city of Mobarakeh, Esfahan Province, Iran. It is the largest steel maker of MENA region, and one of the largest industrial complexes operating in Iran. It was commissioned after the Iranian Revolution in 1979 and initiated operations during 1993. It underwent major revamping during year 2000, and is scheduled for a second and third revamping in 2009–2010, bringing the total steel output to 7,200,000 metric tons per year. The company owns the successful football club, Sepahan.

Morgan Park is a neighborhood in Duluth, Minnesota, United States.

Steel, Peech and Tozer

Steel, Peech and Tozer was a large steel maker with works situated at Ickles and Templeborough, in Rotherham, South Yorkshire, England.

Dillinger Hütte

Dillinger Hütte is a steel producer in Dillingen, in the German Federal State of Saarland, and has a history stretching back more than three hundred years. The plant was founded in 1685, and was Germany's first Aktiengesellschaft, or joint stock company (1809). The first continuous-caster for slabs in the world was commissioned in Dillingen in 1962. A further machine, permitting casting of slabs of up to 400 mm in thickness - the thickest produced anywhere in the world at that time - was added, along with other new facilities, in 1998. In 2010, Dillinger Hütte successfully produced the first 450 mm thick slab - another world record. The principal equipment in the rolling mill now takes the form of two four-high stands, of which one is currently the largest in the world, with an effective rolling width of 5.5 m and a rolling pressure of 110 MN.

Qatar Steel

Qatar Steel was formed in 1974 as the first integrated steel plant in the Persian Gulf region. Commercial production commenced in 1978 with the company becoming wholly owned by Industries Qatar in 2003.

PT Krakatau Steel (Persero) Tbk. is the largest steel maker in Indonesia, headquartered in Cilegon, Banten. The factory is set on a 280-hectare (700-acre) plot in the western end of Banten and adjacent to the Sunda Strait, and where the Krakatoa volcano and island from which the company takes its name are located.

Electrotherm (India) Limited was founded in 1983 to cater to the needs of all segments of steel industry, foundries and heat treatment industry. Today, Electrotherm is a diversified conglomerate having businesses in the field of Engineering & Projects catering to steel and foundry industry; transformer manufacturing; steel making; ductile iron pipe making; manufacturing of battery operated vehicles; renewable energy; transmission line tower and education.

JSW Steel Ltd Indian multinational steel company

JSW Steel Ltd. is an Indian steel making company based in Mumbai, Maharashtra. It is a subsidiary of JSW Group. It is one of the fastest growing companies in India with a global footprint in over 140 countries. After the merger of ISPAT steel, JSW Steel has become India's second largest private sector steel company. The current installed capacity of the company stands at 18 MTPA. A $13 billion conglomerate, with presence across India, USA, South America & Africa, the JSW Group is a part of the O.P. Jindal Group with strong footprints across core economic sectors, namely, Steel, Energy, Infrastructure, Cement, Ventures and Sports. JSW's history can be traced back to 1982, when the Jindal Group acquired Piramal Steel Limited, which operated a mini steel mill at Tarapur in Maharashtra and renamed it as Jindal Iron and Steel Company (JISCO).

Scunthorpe Steelworks

The Iron and Steel Industry in Scunthorpe was established in the mid 19th century, following the discovery and exploitation of middle Lias ironstone east of Scunthorpe, Lincolnshire, England.

Iron and steel industry in India

The iron and steel industries are among the most important industries in India. India replaces Japan as second top steel producer in January,2019. As per worldsteel, India's crude steel production in 2018 was at 106.5 MT, 4.9% increase from 101.5 MT in 2017, means that India has replaced Japan as world second largest steel production country. Japan produced 104.3 MT in year 2018, decrease of 0.3% compared to year 2017. Industry produced 82.68 million tons of total finished steel and 9.7 million tons of raw iron. Most iron and steel in India is produced from iron ore.

Ajaokuta Steel Company Limited (ASCL) popularly known as Ajaokuta Steel Mill is a steel mill in Nigeria, located in Ajaokuta, Kogi State, Nigeria. Built on a 24,000 hectares site starting in 1979, it is the largest steel mill in Nigeria, and the coke oven and byproducts plant are larger than all the refineries in Nigeria combined. However, the project was mismanaged and remains incomplete 40 years later. Three-quarters of the complex have been abandoned, and only the light mills have been put into operation for small-scale fabrication and the production of iron rods.

Lithgow Blast Furnace Former blast furnace in New South Wales

The Lithgow Blast Furnace is a heritage-listed former blast furnace and now park and visitor attraction at Inch Street, Lithgow, City of Lithgow, New South Wales, Australia. It was built from 1906 to 1907 by William Sandford Limited. It is also known as Eskbank Ironworks Blast Furnace site; Industrial Archaeological Site. The property is owned by Lithgow City Council. It was added to the New South Wales State Heritage Register on 2 April 1999.

References

  1. Ade Ajayi, John; Adegbite, Michael; Iyanda, Abimbola. "SUSTAINABLE IRON AND STEEL PRODUCTION IN NIGERIA: THE TECHNO-ECONOMIC BACKBONE OF THE NATIONAL DEVELOPMENT" (PDF).
  2. Agbu, Osita (2007). The iron and steel industry and Nigeria's industrialization: exploring cooperation with Japan. Institute of Developing Economies, Japan External Trade Organization. pp. 41–45.