Steel industry in Italy

Last updated

The steel industry in Italy originated in the 19th century.

Contents

History

The beginnings of the steel industry in Italy were strongly influenced by the modest presence of underground iron ore and coal in particular, that occurred in 1880, an increasing import of pig iron from abroad. With the widespread application of iron in the railways and in the mechanical industry in general witnessed the slow renewal of the old ironworks (with the adoption of Martin-Siemens furnaces and converters from scrap iron). The regions of Italy that contributed most to the expansion of production were Liguria, Lombardy, Piedmont, Tuscany. In 1884 the Italian state, including the potential strategic role of the steel industry, built a large modern steel mill for that period at Terni. At the beginning of the 20th century, to improve the use of iron ore national and limit dependence on foreign, were built some coke furnaces for the production of cast iron: in Portoferraio (with the company Elba) in 1902, in Piombino and finally in Bagnoli. During this period, in 1905, the company ILVA [1] was founded with the support of the Italian government, and acquired the management of the plants in Piombino, Savona, Elba, and later, of the largest plant of Bagnoli, to create a large group of steel production and construction of ships.

See also

Related Research Articles

Elba Mediterranean island in Italy

Elba is a Mediterranean island in Tuscany, Italy, 10 km (6.2 mi) from the coastal town of Piombino on the Italian mainland, and the largest island of the Tuscan Archipelago. It is also part of the Arcipelago Toscano National Park, and the third largest island in Italy, after Sicily and Sardinia. It is located in the Tyrrhenian Sea about 50 km (30 mi) east of the French island of Corsica.

Blast furnace Type of furnace used for smelting to produce industrial metals

A blast furnace is a type of metallurgical furnace used for smelting to produce industrial metals, generally pig iron, but also others such as lead or copper. Blast refers to the combustion air being "forced" or supplied above atmospheric pressure.

Teesside Built-up area in northern England

Teesside is a built-up area around the River Tees in the north of England, split between County Durham and North Yorkshire. The name was initially used as a county borough in the North Riding of Yorkshire.

Wealden iron industry

The Wealden iron industry was located in the Weald of south-eastern England. It was formerly an important industry, producing a large proportion of the bar iron made in England in the 16th century and most British cannon until about 1770. Ironmaking in the Weald used ironstone from various clay beds, and was fuelled by charcoal made from trees in the heavily wooded landscape. The industry in the Weald declined when ironmaking began to be fuelled by coke made from coal, which does not occur accessibly in the area.

Steel mill Plant for steelmaking

A steel mill or steelworks is an industrial plant for the manufacture of steel. It may be an integrated steel works carrying out all steps of steelmaking from smelting iron ore to rolled product, but may also be a plant where steel semi-finished casting products are made from molten pig iron or from scrap.

Ironworks Building or site where iron is smelted

An ironworks or iron works is an industrial plant where iron is smelted and where heavy iron and steel products are made. The term is both singular and plural, i.e. the singular of ironworks is ironworks.

Populonia Frazione in Tuscany, Italy

Populonia or Populonia Alta today is a frazione of the comune of Piombino. As of 2009 its population was 17. Populonia is especially noteworthy for its Etruscan remains, including one of the main necropolis in Italy, discovered by Isidoro Falchi.

ArcelorMittal Multinational steel manufacturing corporation

ArcelorMittal S.A. is a multinational steel manufacturing corporation headquartered in Luxembourg City. It was formed in 2006 from the takeover and merger of Arcelor by Indian-owned Mittal Steel. ArcelorMittal is the second largest steel producer in the world, with an annual crude steel production of 78.5 million metric tonnes as of 2018. It is ranked 197th in the 2022 Fortune Global 500 ranking of the world's largest corporations.

Thomas Iron Company American iron manufacturing firm

The Thomas Iron Company was a major iron-making firm in the Lehigh Valley from its organization in 1854 until its decline and eventual dismantling in the early 20th century. The firm was named in honor of its founder, David Thomas, who had emigrated to the United States in 1839 to introduce hot blast iron making in the Lehigh Valley, and now embarked on an independent ironmaking venture.

Magnitogorsk Iron and Steel Works, abbreviated as MMK, is an iron and steel company located in the city of Magnitogorsk, Russia. As of 2017, it was the 30th largest steel company in the world.

Before 1800 A.D., the iron and steel industry located where raw material power supply and running water were easily available. After 1950, iron and steel industry began to located on large areas of flat land near sea ports. The history of the modern steel industry began in the late 1850s. Since then, steel has become a staple of the world's industrial economy. This article is intended only to address the business, economic and social dimensions of the industry, since the bulk production of steel began as a result of Henry Bessemer's development of the Bessemer converter, in 1857. Previously, steel was very expensive to produce, and was only used in small, expensive items, such as knives, swords and armor.

Stewarts & Lloyds was a steel tube manufacturer with its headquarters in Glasgow at 41 Oswald Street. The company was created in 1903 by the amalgamation of two of the largest iron and steel makers in Britain, A. & J. Stewart & Menzies, Coatbridge, North Lanarkshire, Scotland and Lloyd & Lloyd, Birmingham, England.

Cornwall Iron Furnace Historic district in Pennsylvania, United States

Cornwall Iron Furnace is a designated National Historic Landmark that is administered by the Pennsylvania Historical and Museum Commission in Cornwall, Lebanon County, Pennsylvania in the United States. The furnace was a leading Pennsylvania iron producer from 1742 until it was shut down in 1883. The furnaces, support buildings and surrounding community have been preserved as a historical site and museum, providing a glimpse into Lebanon County's industrial past. The site is the only intact charcoal-burning iron blast furnace in its original plantation in the western hemisphere. Established by Peter Grubb in 1742, Cornwall Furnace was operated during the Revolution by his sons Curtis and Peter Jr. who were major arms providers to George Washington. Robert Coleman acquired Cornwall Furnace after the Revolution and became Pennsylvania's first millionaire. Ownership of the furnace and its surroundings was transferred to the Commonwealth of Pennsylvania in 1932.

Ravenscraig steelworks

The Ravenscraig steelworks, operated by Colvilles and from 1967 by British Steel Corporation, consisted of an integrated iron and steel works and a hot strip steel mill. They were located in Motherwell, North Lanarkshire, Scotland.

Scunthorpe Steelworks

The Iron and Steel Industry in Scunthorpe was established in the mid 19th century, following the discovery and exploitation of middle Lias ironstone east of Scunthorpe, Lincolnshire, England.

In 2014, the United States was the world’s third-largest producer of raw steel, and the sixth-largest producer of pig iron. The industry produced 29 million metric tons of pig iron and 88 million tons of steel. Most iron and steel in the United States is now made from iron and steel scrap, rather than iron ore. The United States is also a major importer of iron and steel, as well as iron and steel products.

History of the iron and steel industry in the United States Aspect of history

The US iron and steel industry has paralleled the industry in other countries in technological developments. In the 1800s, the US switched from charcoal to coal in ore smelting, adopted the Bessemer process, and saw the rise of very large integrated steel mills. In the 20th century, the US industry successively adopted the open hearth furnace, then the basic oxygen steelmaking process. Since the American industry peaked in the 1940s and 1950s, the US industry has shifted to small mini-mills and specialty mills, using iron and steel scrap as feedstock, rather than iron ore.

Iron and steel industry in India

The iron and steel industry in India is among the most important industries within the country. India surpassed Japan as the second largest steel producer in January 2019. As per worldsteel, India's crude steel production in 2018 was at 106.5 tonnes (MT), 4.9% increase from 101.5 MT in 2017, means that India overtook Japan as the world's second largest steel production country. Japan produced 104.3 MT in year 2018, decrease of 0.3% compared to year 2017. Industry produced 82.68 million tons of total finished steel and 9.7 million tons of raw iron. Most of the iron and steel in India is produced from iron ore.

Oscar Sinigaglia

Oscar Sinigaglia was an Italian engineer and industrialist who was born into the Roman Senigaglia family on October 20, 1877.

Ilva (company)

Ilva S.p.A. is an Italian steel company that for much of the 20th century was Italy's largest steel producer and one of the largest in Europe. In June 2017, Arcelor Mittal became the chief shareholder. On 23 April 2021, capital was infused by the government of Mario Draghi, which took a 38% share and 50% of the voting rights.

References

  1. "Ilva". treccani.it. treccani. Retrieved 5 November 2019.