TAE Technologies

Last updated

TAE Technologies, Inc. [1]
FormerlyTri Alpha Energy, Inc.
Company type Private
Industry Fusion Power Energy Storage
FoundedApril 1998;26 years ago (1998-04)
Founders
Headquarters Foothill Ranch, California, United States
Key people
Number of employees
250 [5]
Subsidiaries
  • TAE Power Management
  • TAE Life Sciences
Website www.tae.com

TAE Technologies, formerly Tri Alpha Energy, is an American company based in Foothill Ranch, California developing aneutronic fusion power. The company's design relies on an advanced beam-driven field-reversed configuration (FRC), [6] which combines features from accelerator physics and other fusion concepts in a unique fashion, and is optimized for hydrogen-boron fuel, also known as proton-boron or p-11B. [7] [8] It regularly publishes theoretical and experimental results in academic journals with hundreds of publications and posters at scientific conferences and in a research library hosting these articles on its website. [9] [10] [11] TAE has developed five generations of original fusion platforms with a sixth currently in development. [12] It aims to manufacture a prototype commercial fusion reactor by 2030. [13]

Contents

Organization

The company was founded in 1998, and is backed by private capital. [14] [15] [16] [17] It operated as a stealth company for many years, refraining from launching its website until 2015. [18] It did not generally discuss progress nor any schedule for commercial production. [16] [19] [20] However, it has registered and renewed various patents. [21] [22] [23] [24] [25] [26] [27]

As of 2021, TAE Technologies reportedly had more than 250 employees [5] and had raised over US$880 million. [28]

Funding

Main financing has come from Goldman Sachs and venture capitalists such as Microsoft co-founder Paul Allen's Vulcan Inc., Rockefeller's Venrock, and Richard Kramlich's New Enterprise Associates. The Government of Russia, through the joint-stock company Rusnano, invested in Tri Alpha Energy in October 2012, and Anatoly Chubais, Rusnano CEO, became a board member. [16] [19] [29] [30] [31] Other investors include the Wellcome Trust and the Kuwait Investment Authority. [32] As of July 2017 the company reported that it had raised more than $500 million in backing. [7] As of 2020, it had raised over $600 million, [33] which rose to around $880 million in 2021 [32] and $1.2 billion as of 2022. [34]

Leadership and board of directors

TAE's technology was co-founded by physicist Norman Rostoker, as a spin-out of his work at the University of California, Irvine. [35] Steven Specker, former CEO of the Electrical Power Research Institute (EPRI), was CEO from October 2016 to July 2018. Michl Binderbauer, who earned his PhD. in plasma physics under the guidance of Rostoker at UCI, [12] moved from CTO to CEO following Specker's retirement. Specker remains an advisor. [36] Additional board members include Jeff Immelt, former CEO of General Electric; [37] John J. Mack, former CEO of Morgan Stanley; [38] and Ernest Moniz, former United States Secretary of Energy at the US Department of Energy, who joined the company's board of directors in May 2017. [39] [40]

Collaborators

Since 2014 TAE Technologies has worked with Google to develop a process to analyze the data collected on plasma behavior in fusion reactors. [41] In 2017, using a machine learning tool developed through the partnership and based on the "Optometrist Algorithm", it found significant improvements in plasma containment and stability over the previous C-2U machine. [42] The study's results were published in Scientific Reports . [43]

In November 2017 the company was admitted to a United States Department of Energy program, "Innovative and Novel Computational Impact on Theory and Experiment", that gave it access to the Cray XC40 supercomputer. [1]

In 2021, TAE Technologies announced a joint research project with Japan’s Institute for Fusion Science (NIFS), [44] a three year-long study on the effects of hydrogen-boron fuel reactions in the NIFS Large Helical Device (LHD). [45]

Subsidiaries

TAE Life Sciences

In March 2018 TAE Technologies announced it had raised $40 million to create TAE Life Sciences, a subsidiary focused on refining boron neutron capture therapy (BNCT) for cancer treatment, [46] with funding led by ARTIS Ventures. [47] TAE Life Sciences also announced that it would partner with Neuboron Medtech, which would be the first to install the company's beam system. TAE Life Sciences shares common board members with TAE Technologies and is led by Bruce Bauer. [48]

TAE Power Solutions

In September 2021, TAE Technologies announced the formation of a new division, Power Solutions, [49] to commercialize the power management systems developed on the C-2W/Norman reactor for the electric vehicle, charging infrastructure, and energy storage markets, with veteran industrialist David Roberts as its CEO.

Design

Underlying theory

An FRC is a loop of plasma. As current moves around it creates a field which self-contains the plasma. In practice, this looks more like a hotdog shape. Field-Reversed Configuration.svg
An FRC is a loop of plasma. As current moves around it creates a field which self-contains the plasma. In practice, this looks more like a hotdog shape.

In mainline fusion approaches, the energy needed to allow reactions, the Coulomb barrier, is provided by heating the fusion fuel to millions of degrees. In such fuel, the electrons disassociate from their ions, to form a gas-like mixture known as a plasma. In any gas-like mixture, the particles will be found in a wide variety of energies, according to the Maxwell–Boltzmann distribution. In these systems, fusion occurs when two of the higher-energy particles in the mix randomly collide. Keeping the fuel together long enough for this to occur is a major challenge.

TAE's machines spin plasma up into a looped structure called a field-reversed configuration (FRC) which is a loop of hot, dense plasma. [50] Material inside an FRC is self-contained by the fields the plasma creates. As the plasma current moves around the loop, it creates a magnetic field perpendicular to the direction of motion, much like current in a wire would do. This self-created field helps to hold in the plasma current and keeps the loop stable.

The challenge with field-reversed configurations is that they slow down over time, wobble, and eventually collapse. The company's innovation was to continuously apply particle beams along the surface of the FRC to keep it rotating. [51] This beam and hoop system was key to increasing the machines' longevity, stability and performance.

TAE's design

The TAE design forms a field-reversed configuration (FRC), a self-stabilized rotating toroid of particles similar to a smoke ring. In the TAE system, the ring is made as thin as possible, about the same aspect ratio as an opened tin can. Particle accelerators inject fuel ions tangentially to the surface of the cylinder, where they either react or are captured into the ring as additional fuel.

Unlike other magnetic confinement fusion devices such as the tokamak, FRCs provide a magnetic field topology whereby the axial field inside the reactor is reversed by eddy currents in the plasma, as compared to the ambient magnetic field externally applied by solenoids. The FRC is less prone to magnetohydrodynamic and plasma instabilities than are other magnetic confinement fusion methods. [52] [53] [54] The science behind the colliding beam fusion reactor is used in the company's C-2, C-2U and C-2W projects.

A key concept in the TAE system is that the FRC is kept in a useful state over an extended period. To do this, the accelerators inject the fuel such that when the particles scatter within the ring they cause the fuel already there to speed up in rotation. This process would normally slowly increase the positive charge of the fuel mass, so electrons are also injected to keep the charge roughly neutralized.

The FRC is held in a cylindrical, truck-sized vacuum chamber containing solenoids. [17] [55] [56] [57] It appears the FRC will then be compressed, either using adiabatic compression similar to those proposed for magnetic mirror systems in the 1950s, or by forcing two such FRCs together using a similar arrangement. [11]

The design must achieve the "hot enough/long enough" (HELE) threshold to achieve fusion. The required temperature is 3 billion degrees Celsius (~250 keV), while the required duration (achieved with C2-U) is multiple milliseconds. [58]

The 11B(p,α)αα aneutronic reaction

An essential component of the design is the use of "advanced fuels", i.e. fuels with primary reactions that do not produce neutrons, such as hydrogen and boron-11. FRC fusion products are all charged particles for which highly efficient direct energy conversion is feasible. Neutron flux and associated on-site radioactivity is virtually non-existent. So unlike other nuclear fusion research involving deuterium and tritium, and unlike nuclear fission, no radioactive waste is created. [59] The hydrogen and boron-11 fuel used in this type of reaction is also much more abundant. [60]

TAE Technologies relies on the clean 11B(p,α)αα reaction, also written 11B(p,3α), which produces three helium nuclei called α−particles (hence the name of the company) as follows:

1p + 11B → 12C
12C→ 4He + 8Be
8Be→24He

A proton (identical to the most common hydrogen nucleus) striking boron-11 creates a resonance in carbon-12, which decays by emitting one high-energy primary α−particle. This leads to the first excited state of beryllium-8, which decays into two low-energy secondary α-particles. This is the model commonly accepted in the scientific community since the published results account for a 1987 experiment. [61]

TAE claimed that the reaction products should release more energy than what is commonly envisaged. In 2010, Henry R. Weller and his team from the Triangle Universities Nuclear Laboratory (TUNL) used the high intensity γ-ray source (HIγS) at Duke University, funded by TAE and the U.S. Department of Energy, [62] to show that the mechanism first proposed by Ernest Rutherford and Mark Oliphant in 1933, [63] then Philip Dee and C. W. Gilbert from the Cavendish Laboratory in 1936, [64] and the results of an experiment conducted by French researchers from IN2P3 in 1969, [65] was correct. The model and the experiment predicted two high energy α-particles of almost equal energy. One was the primary α-particle and the other a secondary α-particle, both emitted at an angle of 155 degrees. A third secondary α-particle is also emitted, of lower energy. [66] [67] [10] [68]

Inverse cyclotron converter (ICC)

Direct energy conversion systems for other fusion power generators, involving collector plates and "Venetian blinds" or a long linear microwave cavity filled with a 10-Tesla magnetic field and rectennas, are not suitable for fusion with ion energies above 1 MeV. The company employed a much shorter device, an inverse cyclotron converter (ICC) that operated at 5 MHz and required a magnetic field of only 0.6 tesla. The linear motion of fusion product ions is converted to circular motion by a magnetic cusp. Energy is collected from the charged particles as they spiral past quadrupole electrodes. More classical collectors collect particles with energy less than 1 MeV. [17] [22] [23]

The estimation of the ratio of fusion power to radiation loss for a 100 MW FRC has been calculated for different fuels, assuming a converter efficiency of 90% for α-particles, [69] 40% for Bremsstrahlung radiation through photoelectric effect, and 70% for the accelerators, with 10T superconducting magnetic coils: [17]

The spin polarization enhances the fusion cross section by a factor of 1.6 for 11B. [70] A further increase in Q should result from the nuclear quadrupole moment of 11B. [54] And another increase in Q may also result from the mechanism allowing the production of a secondary high-energy α-particle. [10] [67] [68]

TAE Technologies plans to use the p-11B reaction in their commercial FRC for safety reasons and because the energy conversion systems are simpler and smaller: since no neutron is released, thermal conversion is unnecessary, hence no heat exchanger or steam turbine.

The "truck-sized" 100 MW reactors designed in TAE presentations are based on these calculations. [17]

Progression of Machines

Sewer Pipe

Developed in 1998, the company’s proof-of-concept machine was created using a common sewer pipe and first demonstrated the viability of forming a field-reverse configured magnetic field. [12] [71]

CBFR-SPS

The CBFR-SPS is a 100 MW-class, magnetic field-reversed configuration, aneutronic fusion rocket concept. The reactor is fueled by an energetic-ion mixture of hydrogen and boron (p-11B). Fusion products are helium ions (α-particles) expelled axially out of the system. α-particles flowing in one direction are decelerated and their energy directly converted to power the system; and particles expelled in the opposite direction provide thrust. Since the fusion products are charged particles and does not release neutrons, the system does not require the use of a massive radiation shield. [72] [73]

C-2

Various experiments have been conducted by TAE Technologies on the world's largest compact toroid device called "C-2". Results began to be regularly published in 2010, with papers including 60 authors. [11] [74] [75] [76] [77] C-2 results showed peak ion temperatures of 400 Electron volts (5 million degrees Celsius), electron temperatures of 150 Electron volts, plasma densities of 1·1019 m−3 and 1·109 fusion neutrons per second for 3 milliseconds. [11] [78]

Budker Institute

The Budker Institute of Nuclear Physics, Novosibirsk, built a powerful plasma injector, shipped in late 2013 to the company's research facility. The device produces a neutral beam in the range of 5 to 20 MW, and injects energy inside the reactor to transfer it to the fusion plasma. [27] [79] [80]

C-2U

In March 2015, the upgraded C-2U with edge-biasing beams showed a 10-fold improvement in lifetime, with FRCs heated to 10 million degrees Celsius and lasting 5 milliseconds with no sign of decay.[ citation needed ] The C-2U functions by firing two donut shaped plasmas at each other at 1 million kilometers per hour, [81] the result is a cigar-shaped FRC as much as 3 meters long and 40 centimeters across. [82] The plasma was controlled with magnetic fields generated by electrodes and magnets at each end of the tube. The upgraded particle beam system provided 10 megawatts of power. [83] [84]

C-2W/Norman

In 2017, TAE Technologies renamed the C-2W reactor "Norman" in honor of the company's co-founder Norman Rostoker who died in 2014. In July 2017, the company announced that the Norman reactor had achieved plasma. [85] The Norman reactor is reportedly able to operate at temperatures between 50 million and 70 million°C. [7] In February 2018, the company announced that after 4,000 experiments it had reached a high temperature of nearly 20 million°C. [86] In 2018, TAE Technologies partnered with the Applied Science team at Google to develop the technology inside Norman to maximize electron temperature, aiming to demonstrate breakeven fusion. [87] In 2021, TAE Technologies stated Norman was regularly producing a stable plasma at temperatures over 50 million degrees, meeting a key milestone for the machine and unlocking an additional $280 million in financing, bringing its total of funding raised up to $880 million. [32] In 2023, the company published a peer-reviewed paper reporting the first measurement of p-11B fusion in magnetically confined plasma at the LHD in Japan. [88]

Copernicus

The Copernicus device will operate using hydrogen and is expected to attain net energy gain around 2025. [89] [36] The approximate cost of the reactor is $200 million, and it is intended to reach temperatures of around 100 million°C to validate conditions needed for deuterium-tritium fusion while the company scales to p-11B fuel for its superior environmental and cost profile. TAE intends to start construction in 2022. [90]

Da Vinci

The Da Vinci device is a proposed successor device to Copernicus, and a prototype for a commercially scalable reactor. It is scheduled to be developed in the second half of the 2020s and is expected to achieve 3 billion°C and produce fusion energy from the p-11B fuel cycle. [90]

See also

Related Research Articles

<span class="mw-page-title-main">Nuclear fusion</span> Process of combining atomic nuclei

Nuclear fusion is a reaction in which two or more atomic nuclei, usually deuterium and tritium, combine to form one or more different atomic nuclei and subatomic particles. The difference in mass between the reactants and products is manifested as either the release or absorption of energy. This difference in mass arises due to the difference in nuclear binding energy between the atomic nuclei before and after the reaction. Nuclear fusion is the process that powers active or main-sequence stars and other high-magnitude stars, where large amounts of energy are released.

<span class="mw-page-title-main">Tokamak</span> Magnetic confinement device used to produce thermonuclear fusion power

A tokamak is a device which uses a powerful magnetic field generated by external magnets to confine plasma in the shape of an axially symmetrical torus. The tokamak is one of several types of magnetic confinement devices being developed to produce controlled thermonuclear fusion power. The tokamak concept is currently one of the leading candidates for a practical fusion reactor.

<span class="mw-page-title-main">Fusion power</span> Electricity generation through nuclear fusion

Fusion power is a proposed form of power generation that would generate electricity by using heat from nuclear fusion reactions. In a fusion process, two lighter atomic nuclei combine to form a heavier nucleus, while releasing energy. Devices designed to harness this energy are known as fusion reactors. Research into fusion reactors began in the 1940s, but as of 2024, no device has reached net power, although net positive reactions have been achieved.

This timeline of nuclear fusion is an incomplete chronological summary of significant events in the study and use of nuclear fusion.

<span class="mw-page-title-main">Inertial electrostatic confinement</span> Fusion power research concept

Inertial electrostatic confinement, or IEC, is a class of fusion power devices that use electric fields to confine the plasma rather than the more common approach using magnetic fields found in magnetic confinement fusion (MCF) designs. Most IEC devices directly accelerate their fuel to fusion conditions, thereby avoiding energy losses seen during the longer heating stages of MCF devices. In theory, this makes them more suitable for using alternative aneutronic fusion fuels, which offer a number of major practical benefits and makes IEC devices one of the more widely studied approaches to fusion.

<span class="mw-page-title-main">Aneutronic fusion</span> Form of fusion power

Aneutronic fusion is any form of fusion power in which very little of the energy released is carried by neutrons. While the lowest-threshold nuclear fusion reactions release up to 80% of their energy in the form of neutrons, aneutronic reactions release energy in the form of charged particles, typically protons or alpha particles. Successful aneutronic fusion would greatly reduce problems associated with neutron radiation such as damaging ionizing radiation, neutron activation, reactor maintenance, and requirements for biological shielding, remote handling and safety.

<span class="mw-page-title-main">Magnetic confinement fusion</span> Approach to controlled thermonuclear fusion using magnetic fields

Magnetic confinement fusion (MCF) is an approach to generate thermonuclear fusion power that uses magnetic fields to confine fusion fuel in the form of a plasma. Magnetic confinement is one of two major branches of controlled fusion research, along with inertial confinement fusion.

<span class="mw-page-title-main">Field-reversed configuration</span> Magnetic confinement fusion reactor

A field-reversed configuration (FRC) is a type of plasma device studied as a means of producing nuclear fusion. It confines a plasma on closed magnetic field lines without a central penetration. In an FRC, the plasma has the form of a self-stable torus, similar to a smoke ring.

Migma, sometimes migmatron or migmacell, was a proposed colliding beam fusion reactor designed by Bogdan Maglich in 1969. Migma uses self-intersecting beams of ions from small particle accelerators to force the ions to fuse. Similar systems using larger collections of particles, up to microscopic dust sized, were referred to as "macrons". Migma was an area of some research in the 1970s and early 1980s, but lack of funding precluded further development.

The polywell is a proposed design for a fusion reactor using an electric and magnetic field to heat ions to fusion conditions.

<span class="mw-page-title-main">Plasma-facing material</span>

In nuclear fusion power research, the plasma-facing material (PFM) is any material used to construct the plasma-facing components (PFC), those components exposed to the plasma within which nuclear fusion occurs, and particularly the material used for the lining the first wall or divertor region of the reactor vessel.

The Lockheed Martin Compact Fusion Reactor (CFR) was a fusion power project at Lockheed Martin’s Skunk Works. Its high-beta configuration, which implies that the ratio of plasma pressure to magnetic pressure is greater than or equal to 1, allows a compact design and expedited development. The project was active between 2010 and 2019, after that date there have been no updates and it appears the division has shut down.

Direct energy conversion (DEC) or simply direct conversion converts a charged particle's kinetic energy into a voltage. It is a scheme for power extraction from nuclear fusion.

Helion Energy, Inc. is an American fusion research company, located in Everett, Washington. They are developing a magneto-inertial fusion technology to produce helium-3 and fusion power via aneutronic fusion, which could produce low-cost clean electric energy using a fuel that can be derived exclusively from water.

Norman Rostoker was a Canadian plasma physicist known for being a pioneer in developing clean plasma-based fusion energy. He co-founded TAE Technologies in 1998 and held 27 U.S. Patents on plasma-based fusion accelerators.

The ARC fusion reactor is a design for a compact fusion reactor developed by the Massachusetts Institute of Technology (MIT) Plasma Science and Fusion Center (PSFC). ARC aims to achieve an engineering breakeven of three. The key technical innovation is to use high-temperature superconducting magnets in place of ITER's low-temperature superconducting magnets. The proposed device would be about half the diameter of the ITER reactor and cheaper to build.

<span class="mw-page-title-main">Princeton field-reversed configuration</span>

The Princeton Field Reversed Configuration (PFRC) is a series of experiments in plasma physics, an experimental program to evaluate a configuration for a fusion power reactor, at the Princeton Plasma Physics Laboratory (PPPL). The experiment probes the dynamics of long-pulse, collisionless, low s-parameter field-reversed configurations (FRCs) formed with odd-parity rotating magnetic fields. FRCs are the evolution of the Greek engineer's Nicholas C. Christofilos original idea of E-layers which he developed for the Astron fusion reactor. The PFRC program aims to experimentally verify the physics predictions that such configurations are globally stable and have transport levels comparable with classical magnetic diffusion. It also aims to apply this technology to the Direct Fusion Drive concept for spacecraft propulsion.

The Star Thrust Experiment (STX) was a plasma physics experiment at the University of Washington's Redmond Plasma Physics Laboratory which ran from 1999 to 2001. The experiment studied magnetic plasma confinement to support controlled nuclear fusion experiments. Specifically, STX pioneered the possibility of forming a Field-reversed configuration (FRC) by using a Rotating Magnetic Field (RMF).

Colliding beam fusion (CBF), or colliding beam fusion reactor (CBFR), is a class of fusion power concepts that are based on two or more intersecting beams of fusion fuel ions that are independently accelerated to fusion energies using a variety of particle accelerator designs or other means. One of the beams may be replaced by a static target, in which case the approach is termed accelerator based fusion or beam-target fusion, but the physics is the same as colliding beams.

The history of nuclear fusion began early in the 20th century as an inquiry into how stars powered themselves and expanded to incorporate a broad inquiry into the nature of matter and energy, as potential applications expanded to include warfare, energy production and rocket propulsion.

References

  1. 1 2 Boyle, Alan (30 November 2017). "TAE Fusion Venture Wins Supercomputer Time – and Reports Progress on Test Device". GeekWire.
  2. ↑ "TAE rearranges its leadership and gets ready for next chapter in fusion quest backed by Paul Allen". 17 July 2018.
  3. ↑ "Tri Alpha Energy Appoints CTO Michl Binderbauer as Company President". MarketWatch. 11 May 2017.
  4. ↑ "Research Homepage of Toshiki Tajima". School of Physical Science, University of California, Irvine. Archived from the original on 2 June 2014.
  5. 1 2 "TAE Technologies – About Us". 9 August 2016.
  6. ↑ Gota, H.; Binderbauer, M.W.; Tajima, T.; Putvinski, S.; Tuszewski, M.; Dettrick, S.; Garate, E.; Korepanov, S.; Smirnov, A.; Thompson, M.C.; Trask, E. (4 August 2017). "Achievement of field-reversed configuration plasma sustainment via 10 MW neutral-beam injection on the C-2U device". Nuclear Fusion. 57 (11): 116021. Bibcode:2017NucFu..57k6021G. doi:10.1088/1741-4326/aa7d7b. ISSN   0029-5515. S2CID   19931583.
  7. 1 2 3 Fehrenbacher, Katie (10 July 2017). "Nuclear Fusion Startup Tri Alpha Energy Hits a Big Milestone". GreenTechMedia.
  8. ↑ Shieber, Jonathan (8 April 2021). "Claiming a landmark in fusion energy, TAE Technologies sees commercialization by 2030". Techcrunch.
  9. ↑ "Tri Alpha Energy Research Library". Archived from the original on 2 March 2016. Retrieved 24 February 2016.
  10. 1 2 3 Weller, Henry R. (10 October 2012). Tri-Alpha structures in 12C (PDF). Light Nuclei from First Principles- INT-2012. Institute for Nuclear Theory, University of Washington. Archived from the original (PDF) on 8 March 2016. Retrieved 2 June 2014.
  11. 1 2 3 4 Gota, Hiroshi; Binderbauer, Michl W.; Guo, Houyang Y.; Tuszewski, Michel; Barnes, Dan; Sevier, Leigh (16 August 2011). A Well-Confined Field-Reversed Configuration Plasma Formed by Dynamic Merging of Two Colliding Compact Toroids in C-2 (PDF). Innovative Confinement Concepts (ICC) & US-Japan Compact Torus Plasma (CT) Workshops. Seattle, WA. Archived from the original (PDF) on 30 September 2020. Retrieved 2 June 2014.
  12. 1 2 3 Powell, Corey S. (3 June 2020). "The Road Less Traveled to Fusion Energy". Nautilus. Retrieved 23 November 2021.
  13. ↑ Di Paulo Emilio, Maurizio (21 May 2021). "Carbon-free Energy by Fusion Technology". EE Times.
  14. ↑ "SEC / Form D". U.S. Securities and Exchange Commission. United States federal government, Washington, D.C. 23 February 2001.
  15. ↑ Tajima, Toshiki (24 April 2014). Aneutronic path of fusion at TAE (PDF) (Speech). Public Lecture, American Nuclear Society Student Section of UCI. University of California, Irvine. Archived from the original (PDF) on 2 June 2014.
  16. 1 2 3 Kanellos, Michael (11 March 2013). "Hollywood, Silicon Valley and Russia Join Forces on Nuclear Fusion". Forbes. New York City.
  17. 1 2 3 4 5 Rostoker, Norman; Binderbauer, Michl W.; Monkhorst, Hendrik J. (21 November 1997). "Colliding Beam Fusion Reactor". Science. 278 (5342): 1419–1422. Bibcode:1997Sci...278.1419R. doi:10.1126/science.278.5342.1419. PMID   9367946.
  18. ↑ Grossman, Lev (2 November 2015). "Inside the Quest for Fusion, Clean Energy's Holy Grail". Time. Retrieved 24 February 2016.
  19. 1 2 Mark Halper (5 May 2013). "The secret U.S.-Russian nuclear fusion project". SmartPlanet.
  20. ↑ Casacchia, Chris (29 August 2010). "Nuclear Startup: Well Funded, Low Profile". Orange County Business Journal. Orange County, California: Richard Reisman. Archived from the original on 31 August 2010. Retrieved 2 June 2014.
  21. ↑ WOapplication 9710605,Rostoker, Norman&Monkhorst, Hendrik J.,"Fusion Reactor that Produces Net Power from the p-B11 Reaction",published 2004-10-23, assigned to Rostoker, Normanand Monkhorst, Hendrik J.
  22. 1 2 USpatent 6850011,Monkhorst, Hendrik J.&Rostoker, Norman,"Controlled fusion in a field reversed configuration and direct energy conversion",issued 2005-02-01, assigned to The Regents of the University of Californiaand University of Florida Research Foundation
  23. 1 2 WOapplication 2006096772,Binderbauer, Michl; Bystritskii, Vitaly& Rostoker, Normanet al.,"Plasma electric generation system",published 2006-12-28, assigned to Binderbauer, Michland Bystritskii, Vitaly, Norman Rostoker, Franck Wessel
  24. ↑ USpatent 7439678,Rostoker, Norman; Binderbauer, Michl& Qerushi, Artanet al.,"Magnetic and electrostatic confinement of plasma with tuning of electrostatic field",issued 2008-10-21, assigned to The Regents of the University of California
  25. ↑ USapplication 2013125963,Binderbauer, Michl&Tajima, Toshiki,"Conversion of high-energy photons into electricity",published 2013-05-23, assigned to Tri Alpha Energy, Inc.
  26. ↑ WOapplication 2013074666,Binderbauer, Michl; Barnes, Dan& Garate, Eusebioet al.,"Systems and methods for forming and maintaining a high performance FRC",published 2013-07-11, assigned to The Regents of the University of California
  27. 1 2 WOapplication 2014039579,Belchenko, Yuri I.; Burdakov, Alexander V.& Binderbauer, Michlet al.,"Negative ion-based neutral beam injector",published 2014-03-13, assigned to Tri Alpha Energy, Inc.
  28. ↑ "Google-backed TAE Technologies raises $280 million from new, existing investors". Reuters. 8 April 2021.
  29. ↑ Martin, Richard (14 September 2015). "Finally, Fusion Takes Small Steps Toward Reality". MIT Technology Review. Retrieved 9 November 2015.
  30. ↑ Michael Kanellos (21 May 2007). "Nuclear fusion firm draws $40 million from VCs". CNET .
  31. ↑ Vadim Jernov (6 February 2013). "Rusnano Chief Chubais Joins US Tri Alpha Energy Board". RIA Novosti .
  32. 1 2 3 "Claiming a landmark in fusion energy, TAE Technologies sees commercialization by 2030". TechCrunch. 8 April 2021. Retrieved 10 April 2021.
  33. ↑ Clynes, Tom (2020). "5 Big ideas for fusion power: Startups, universities, and major companies are vying to commercialize a nuclear fusion reactor". IEEE Spectrum. 57 (2): 30–37. doi:10.1109/MSPEC.2020.8976899. ISSN   0018-9235. S2CID   211059641.
  34. ↑ Clifford, Catherine (19 July 2022). "Google and Chevron invest in nuclear fusion startup that's raised $1.2 billion". CNBC. Retrieved 1 August 2022.
  35. ↑ Emilio, Maurizio Di Paolo (21 May 2021). "EETimes – Carbon-free Energy by Fusion Technology". EETimes. Retrieved 23 November 2021.
  36. 1 2 "TAE rearranges its leadership and gets ready for next chapter in fusion quest backed by Paul Allen". GeekWire. 17 July 2018. Retrieved 16 January 2019.
  37. ↑ "TAE rearranges its leadership and gets ready for next chapter in fusion quest backed by Paul Allen". GeekWire. 17 July 2018. Retrieved 23 November 2021.
  38. ↑ "Energy Cast | Ep. 45 | Fusion Founder". energy-cast.com. Retrieved 23 November 2021.
  39. ↑ Tesh, Sarah (22 May 2017). "Former Energy Secretary Joins Fusion Power Firm". Physicsworld.com.
  40. ↑ Temple, James (11 July 2017). "Obama's Energy Secretary Addresses Trump's Attacks on His Legacy". MIT Technology Review.
  41. ↑ Bennett, Jay (26 July 2017). "Google's Nuclear Fusion Project is Paying Off". Popular Mechanics.
  42. ↑ Ballarte, Chelsey (26 July 2017). "Better, or Worse? Google Joins Tri Alpha Energy to Find Better Paths to Fusion Power". GeekWire.
  43. ↑ Baltz, E. A.; Trask, E.; Binderbauer, M.; Dikovsky, M.; Gota, H.; Mendoza, R.; Platt, J. C.; Riley, P. F. (25 July 2017). "Achievement of Sustained Net Plasma Heating in a Fusion Experiment with the Optometrist Algorithm". Scientific Reports. 7 (1): 6425. Bibcode:2017NatSR...7.6425B. doi:10.1038/s41598-017-06645-7. PMC   5526926 . PMID   28743898.
  44. ↑ "LHD project / National Institute for Fusion Science". www-lhd.nifs.ac.jp. Retrieved 23 November 2021.
  45. ↑ "TAE Technologies partners with Japan's NIFS for fusion fuel research – Nuclear Engineering International". neimagazine.com. Retrieved 23 November 2021.
  46. ↑ "TAE Bags $40M To Take Targeted Radiotherapy Mainstream". Fierce Biotech. FierceBiotech. 12 March 2018.
  47. ↑ "TAE Life Sciences Fetches $40 Mln Series A in ARTIS Ventures-led Round". PE Hub Network. 12 March 2018.
  48. ↑ "Fusion Energy Venture Branches Out into Cancer Therapy With TAE Life Sciences". GeekWire. 12 March 2018.
  49. ↑ Jost, Kevin (21 September 2021). "TAE establishes unit to boost EV ecosystem". Futurride.com. Retrieved 23 November 2021.
  50. ↑ "FRC Fusion with Advanced Fuels – TAE Technologies | Fusion Power Clean Energy Company". 12 February 2013.
  51. ↑ "TAE Technologies Animation" – via YouTube.
  52. ↑ Rostoker, N.; Wessel, F.J.; Rahman, H.U.; Maglich, B.C.; Spivey, B. (22 March 1993). "Magnetic Fusion with High Energy Self-Colliding Ion Beams". Physical Review Letters . 70 (12): 1818–1821. Bibcode:1993PhRvL..70.1818R. doi:10.1103/PhysRevLett.70.1818. PMID   10053394. S2CID   32950265.
  53. ↑ Binderbauer, M.W.; Rostoker, N. (December 1996). "Turbulent Transport in Magnetic Confinement: How to Avoid it". Journal of Plasma Physics . 56 (3): 451–465. Bibcode:1996JPlPh..56..451B. doi:10.1017/S0022377800019413. S2CID   122582085.
  54. 1 2 Rostoker, N.; Binderbauer, M. W.; Wessel, F. J.; Monkhorst, H. J. Colliding Beam Fusion Reactor (PDF). Invited Paper, Special Session on Advanced Fuels APS-DPP. American Physical Society. Archived from the original on 20 December 2005.{{cite conference}}: CS1 maint: unfit URL (link)
  55. ↑ Rostoker, N.; Binderbauer, M.; Monkhorst, H.J. (16–20 June 1996). Fusion reactors based on colliding beams in a field reversed configuration plasma. Annual meeting of the American Nuclear Society. Fusion Technology. Vol. 30, no. 3. Reno, NV: American Nuclear Society. pp. 1395–1402. ISSN   0748-1896.
  56. ↑ Rostoker, N.; Binderbauer, M.; Monkhorst, H. J. (8–12 March 1999). "Colliding Beam Fusion Reactors with Pulsed Injection". In E. Panarella (ed.). Proceedings of the Third Symposium. Symposium on Current Trends in International Fusion Research. Washington, D.C.: NRC Research Press (published 2002). pp. 79–95. ISBN   9780660184807.
  57. ↑ Rostoker, Norman; Qerushi, Artan; Binderbauer, Michl (June 2003). "Colliding Beam Fusion Reactors". Journal of Fusion Energy . 22 (2): 83–92. Bibcode:2003JFuE...22...83R. doi:10.1023/B:JOFE.0000036407.10861.bc. S2CID   59021417.
  58. ↑ BOYLE, ALAN (10 February 2018). "TAE Technologies pushes plasma machine to a new high on the nuclear fusion frontier". GeekWire. Retrieved 13 February 2018.
  59. ↑ Clery, Daniel (24 August 2015). "Exclusive: Secretive Fusion Company Claims Reactor Breakthrough". American Association for the Advancement of Science. Retrieved 25 February 2016.
  60. ↑ Grandoni, Dino (25 October 2015). "Start-Ups Take on Challenge of Nuclear Fusion". The New York Times. Retrieved 25 February 2016.
  61. ↑ Becker, H. W.; Rolfs, C.; Trautvetter, H. P. (1 January 1987). "Low-energy cross sections for 11B(p, 3α)". Zeitschrift für Physik A. 327 (3): 341–355. doi:10.1007/BF01284459. S2CID   99078656.
  62. ↑ Brian Westenhaus (15 April 2011). "The Boron-11 Hydrogen Fueled Fusion Looks Better Than Thought". New Energy and Fuel.
  63. ↑ Oliphant, M.L.E.; Rutherford, Lord E. (3 July 1933). "Experiments on the Transmutation of Elements by Protons". Proceedings of the Royal Society A. 141 (843): 259–281. Bibcode:1933RSPSA.141..259O. doi: 10.1098/rspa.1933.0117 .
  64. ↑ Dee, P.I.; Gilbert, C.W. (2 March 1936). "The Disintegration of Boron into Three α-Particles". Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences. 154 (881): 279–296. Bibcode:1936RSPSA.154..279D. doi:10.1098/rspa.1936.0051. JSTOR   96484.
  65. ↑ Quebert, J.L.; Marquez, L. (31 March 1969). "Effets des résonances de 12C sur l'émission de particules alpha dans la réaction 11B(p, 3α)". Nuclear Physics A . 126 (3): 646–670. Bibcode:1969NuPhA.126..646Q. doi:10.1016/0375-9474(69)90854-9.
  66. ↑ "Overturned scientific explanation may be good news for nuclear fusion". Duke University. 31 March 2011.
  67. 1 2 Stave, S.; Ahmed, M.W.; France III, R.H.; Henshaw, S.S.; Müller, B.; Perdue, B.A.; Prior, R.M.; Spraker, M.C.; Weller, H.R. (24 January 2011). "Understanding the View the 11B(p,α)αα reaction at the 0.675 MeV resonance" (PDF). Physics Letters B . 696 (1–2): 26–29. Bibcode:2011PhLB..696...26S. doi:10.1016/j.physletb.2010.12.015.
  68. 1 2 Spraker, M.C.; Ahmed, M.W.; Blackston, M.A..; Brown, N.; France III, R.H.; Henshaw, S.S.; Perdue, B.A.; Prior, R.M.; Seo, P.-N.; Stave, S.; Weller, H.R. (August 2012). "The 11B(p,α)8Be → α + α and the 11B(α,α)11B Reactions at Energies Below 5.4 MeV". Journal of Fusion Energy . 31 (4): 357–367. Bibcode:2012JFuE...31..357S. doi: 10.1007/s10894-011-9473-5 .
  69. ↑ Yoshikawa, K.; Noma, T.; Yamamoto, Y. (May 1991). "Direct-Energy Conversion from High-Energy Ions Through Interaction with Electromagnetic Fields". Fusion Science and Technology . 19 (3P2A): 870–875. Bibcode:1991FuTec..19..870Y. doi:10.13182/FST91-A29454. Archived from the original on 26 June 2014.
  70. ↑ Monkhorst, Hendrik J.; Rostoker, Norman; Binderbauer, Michl (16–20 November 1998). Spin Polarization of proton and B11 Beams for the Colliding Beam Fusion Reactor. 40th Annual Meeting of the Division of Plasma Physics (DPP 1998). New Orleans, LA: American Physical Society. Bibcode:1998APS..DPPR8M309M.
  71. ↑ "American Nuclear Society Fusion Energy Division" (PDF). January 2019.
  72. ↑ Wessel, F.J.; Rostoker, N.; Binderbauer, M.W.; Rahman, H.U.; O'Toole, J.A. (30 January – 3 February 2000). Colliding Beam Fusion Reactor Space Propulsion System. Proceedings of the Space Technology and Applications International Forum (STAIF 2000). Vol. 504. Albuquerque, New Mexico: American Institute of Physics (published January 2000). pp. 1425–1430. doi:10.1063/1.1290961.
  73. ↑ Cheung, A.; Binderbauer, M.; Liu, F.; Qerushi, A.; Rostoker, N.; Wessel, F.J. (8–11 February 2004). Colliding Beam Fusion Reactor Space Propulsion System (PDF). Proceedings of the Space Technology and Applications International Forum (STAIF 2004). Vol. 699. Albuquerque, New Mexico: American Institute of Physics (published January 2004). pp. 354–361. doi:10.1063/1.1649593. Archived from the original (PDF) on 16 October 2013.
  74. ↑ Binderbauer, M.W.; Guo, H.Y.; Tuszewski, M.; Barnes, D.C. (20–24 June 2010). High-flux plasma state formed by dynamic merging of two colliding compact toroids. IEEE International Conference on Plasma Science (ICOPS) 2010. Norfolk, VA: Institute of Electrical and Electronics Engineers. doi:10.1109/PLASMA.2010.5534406.
  75. ↑ Guo, H.Y.; (TAE team); et al. (January 2011). "Formation of a long-lived hot field reversed configuration by dynamically merging two colliding high-β compact toroids". Physics of Plasmas . 18 (5): 056110. Bibcode:2011PhPl...18e6110G. doi:10.1063/1.3574380.
  76. ↑ Tuszewski, M.; et al. (May 2012). "A new high performance field reversed configuration operating regime in the C-2 device". Physics of Plasmas . 19 (5): 056108. Bibcode:2012PhPl...19e6108T. doi:10.1063/1.3694677.
  77. ↑ Gota, H.; Thompson, M.C.; Knapp, K.; Van Drie, A.D.; Deng, B.H.; Mendoza, R.; Guo, H.Y.; Tuszewski, M. (October 2012). "Internal magnetic field measurement on C-2 field-reversed configuration plasmas". Review of Scientific Instruments . 83 (10): 10D706. Bibcode:2012RScI...83jD706G. doi: 10.1063/1.4729497 . PMID   23126880.
  78. ↑ Deng, B.H.; Aefsky, J.S; Gota, M.; Kinley, H. (30 October 2014). Measurement of density fluctuation and particle transport in C-2.
  79. ↑ Новосибирские физики собрали инжектор для термоядерного реактора [Novosibirsk physicists build injector for fusion reactor]. Sib.fm (in Russian). Siberia, Russia. 8 November 2013.
  80. ↑ Ivanov, A.A.; et al. (February 2014). "Development of a negative ion-based neutral beam injector in Novosibirsk". Review of Scientific Instruments . 85 (2): 02B102. Bibcode:2014RScI...85bB102I. doi:10.1063/1.4826326. PMID   24593542.
  81. ↑ Byrne, Michael (26 August 2015). "Fusion Power Is a Bit Closer, Claims Mysterious Energy Startup". Motherboard. Retrieved 11 July 2016.
  82. ↑ Clery, Daniel (24 August 2015). "Exclusive: Secretive Fusion Company Claims Reactor Breakthrough". Science Magazine. Retrieved 11 July 2016.
  83. ↑ Clery, Daniel (2 June 2015). "Mystery company blazes a trail in fusion energy". Science . doi:10.1126/science.aac4674.
  84. ↑ Clery, Daniel (28 August 2015). "Dark horse scores a fusion coup". Science . 349 (6251): 912–913. Bibcode:2015Sci...349..912C. doi:10.1126/science.349.6251.912. PMID   26315414.
  85. ↑ Boyle, Alan (10 July 2017). "With Paul Allen's Backing, Tri Alpha Energy Revs Up 'Norman' Device for Fusion Research". GeekWire.
  86. ↑ "TAE Technologies Pushes Plasma Machine to a New High on the Nuclear Fusion Frontier". GeekWire.
  87. ↑ "Powering the world with fusion". Google AI. Archived from the original on 13 June 2018.
  88. ↑ Blain, Loz (1 March 2023). "TAE makes world-first readings of magnetically-confined H-B fusion". New Atlas. Retrieved 4 March 2023.
  89. ↑ McMahon, Jeff. "Energy From Fusion In 'A Couple Years,' CEO Says, Commercialization in Five". Forbes. Retrieved 16 January 2019.
  90. 1 2 Powell, Corey S. (3 June 2020). "The Road Less Traveled to Fusion Energy". Nautilus. Retrieved 4 June 2020.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.