|Mass||27.2 g (420 gr)|
|Diameter||38.1 mm (1.5 in)|
|Composition||90% silver |
|Years of minting||1873–1885|
|Design||Left-facing seated Liberty, who extends her hand, bearing an olive branch, over the sea.|
The United States trade dollar was a dollar coin minted by the United States Mint to compete with other large silver trade coins that were already popular in East Asia. The idea first came about in the 1860s, when the price of silver began to decline due to increased mining efforts in the western United States. A bill providing in part for the issuance of the trade dollar was eventually put before Congress, where it was approved and later signed into law as the Coinage Act of 1873. The act made trade dollars legal tender up to five dollars. A number of designs were considered for the trade dollar, and an obverse and reverse created by William Barber were selected.
The first trade dollars were struck in 1873, and the majority of the coins were sent to China. Eventually, bullion producers began converting large amounts of silver into trade dollars, causing the coins to make their way into American commercial channels. This caused frustration among those to whom they were given in payment, as the coins were largely maligned and traded for less than one dollar each. In response to their wide distribution in American commerce, the coins were officially demonetized in 1876, but continued to circulate. Production of business strikes ended in 1878, though the mintage of proof coins officially continued until 1883. The trade dollar was re-monetized when the Coinage Act of 1965 was signed into law.
Following the California gold rush that began in 1849 and the Australian gold rush that began in 1851, a larger amount of gold was put into commerce than could be easily absorbed by the normal channels.This resulted in a decrease in the value of gold and an increase in the relative value of silver. As a result, silver coins rapidly disappeared from circulation due either to hoarding or melting. In response, Congress authorized the Mint to reduce the quantity of silver in all denominations except the three-cent piece and silver dollar. Beginning in the 1860s, silver production rose and the price decreased. During this time, silver coins largely disappeared from circulation and were replaced by copper and paper currency.
In China, the Mexican peso (successor to the Spanish dollar) was greatly valued in commerce. However, the Chinese were sensitive to any changes in the coin's design, and were reluctant to accept newer coins due to a minor design change. The American silver dollar, 7.5 grains (0.49 g) lighter than its Spanish counterpart, was unpopular in East Asia due to its light weight, forcing American merchants to purchase the Spanish or Mexican pieces to use in trade. Beginning in 1866, during the reign of Emperor Maximilian, the design was changed to show the Emperor's portrait; this caused widespread nonacceptance of the coins in China.
While conducting an investigation of the Mint at San Francisco, deputy comptroller of the currency John Jay Knox began discussing the monetary situation with Louis A. Garnett, a man who had worked as both the treasurer and assayer of the San Francisco Mint.Garnett recommended that the United States mint a commercial dollar that would be exported to East Asia to compete with other countries' silver trade coins that were already popular in that region. Garnett's rationale was that the majority of the coins would be hoarded or melted in Asia and would never be presented for redemption, allowing the government to make a profit from the seigniorage. During his time in San Francisco, Knox also discussed the proposed commercial dollar with Henry Linderman, who was working as a special agent for the Treasury Department at that time. In 1870, Knox wrote a report to the Treasury and wrote the draft for a bill on coinage. Knox's bill was approved by George Boutwell, Secretary of the Treasury. After modification and review from current and former government officials, the bill was put before Congress.
On November 19, 1872, while the coinage bill was still before Congress, Linderman made a report to the Secretary of the Treasury.In the report, Linderman argued that the coin need not hold legal tender status, and that it could simply be a piece of silver imprinted with its weight and fineness. Linderman also notes that such a product could supersede the Mexican dollar and eventually command a six to eight percent premium; at that time, American silver exported to East Asia was being sold at a two percent discount. Linderman proposed that the coin be named the "silver union" in order to distinguish it from the standard coins then in production.
In February 1872, the bill was amended by a House of Representatives committee to include authorization for a commercial dollar weighing 420 grains (27 g); but this proposal was replaced three months later when the House voted to include provisions for the production of a standard silver dollar weighing 384 grains (24.9 g). While in the Senate, a provision was added to the bill requiring the Treasury to coin a trade dollar of 420 grains (27 g), as had been done earlier in the House. The revised bill, which came to be known as the Coinage Act of 1873, was approved in the House and Senate and was signed by President Ulysses S. Grant on February 12, 1873.
The bill provided, in part, for the striking of trade dollars which held legal tender status up to five dollars.The legal tender provision was added by a last-minute rider at the behest of silver interests. At the insistence of Ohio Senator John Sherman, the weight and fineness of the piece was indicated on the reverse, an attribution which numismatic historian Don Taxay found incomprehensible as "Chinese merchants would never understand them".
Prior to the passage of the Coinage Act, the director of the Philadelphia Mint oversaw all branch mints.After the Act, the office of director was transferred to Washington, D.C., and responsibility for each mint was handed over to a superintendent.
Throughout the year of 1872, the Mint struck a series of commercial dollar patterns in anticipation of the passage of the coinage bill.Production of patterns continued into 1873, but the denomination of the pattern coins was changed from "commercial dollar" to "trade dollar" before the bill was signed into law. After passage of the Coinage Act, Linderman met with Director of the Mint James Pollock to discuss the design of the newly authorized trade dollar. The two men agreed to request a jewelry and engraving firm, Bailey Banks & Biddle of Philadelphia, to create designs that would be compared to those already created by Chief Engraver William Barber.
After examining the designs of both parties, Linderman ordered that the design would depict a seated figure representing Liberty facing to the viewer's left, representing the direction of East Asia.Linderman apparently selected the designs from two different patterns. In June 1873, Linderman reviewed the various patterns created by Barber; he chose an obverse which one contemporary reporter described as "a female figure seated on bales of merchandise, holding in her left hand a scroll bearing the word 'Liberty'. At her back is a sheaf of wheat, expressing, with the bales of goods, the commercial character of the coin: the right hand extended holds the olive branch." The selected reverse depicts the bald eagle as required by law. The eagle has three arrows in the right claw and an olive branch in the left, a reversal to most other U.S. silver coins of the era. A set of six patterns, four with variations on the adopted obverse, and two showing portraits of Liberty, was sold by the Mint to the public in limited quantities.
Linderman assumed the position of Director of the Mint and Pollock became Superintendent of the Philadelphia Mint.In July 1873, production began on the dies needed to strike the coins. During this time, in a telegram to Pollock, Linderman asked that production of trade dollars be hastened because Mexico was preparing to issue another series of dollars with the older design popular in Asia, a design that was discontinued in 1866. The first trade dollars were struck during a ceremony held on July 11, 1873. Forty thousand pieces were issued in the first release, on July 14. The Carson City Mint received its first dies for the new coins on July 22, and those intended for the San Francisco Mint arrived shortly after. In total, 396,635 business strikes and 865 proof coins were struck at the Philadelphia Mint during the first year of production. The Carson City and San Francisco mints struck 124,500 and 703,000 coins respectively.
There were complaints that year from officials at all three of the mints concerning the quality of the coins produced.In the summer of 1874, coiner A. Loudon Snowden issued a formal complaint to Pollock about the quality of the strikings, most notably on the high points of the design; Barber began modifying the design later that year, reducing the relief. The modified dies began service in 1875. In the fall of that year, Linderman suggested that the reverse of the trade dollar should be altered in 1876 to commemorate the centennial of American independence; Pollock opposed the idea, noting that such a change would be difficult to carry out because Congressional approval would be necessary and that it might cause the coin to lose favor in East Asia. In May 1876, former assistant engraver Anthony C. Paquet created a reverse die after being hired by Linderman to improve the striking quality of the coins. Linderman approved of the new design, but it was ultimately rejected by Mint officials due to fears of Chinese disapproval.
Though production of business strikes ended in 1878, the striking of proof coins continued in limited numbers until 1883, when the final mintage of 979 coins was struck at the Philadelphia Mint.In 1908, it was discovered that ten proofs dated 1884 and five dated 1885 were produced, but these pieces are not listed in official records and it is unknown when they were created.
Most of the 1873 production was exported to China, and in October of that year, the Tongzhi Emperor had an assay test conducted on the coins.In a proclamation translated by Chinese consul and interpreter Walter Hillier, the Emperor stated:
This Proclamation, therefore, is for the information of you merchants, traders, soldiers and people of every district. You must know that the 'Eagle Trade Dollar' that has lately come to Hong Kong has been jointly assayed by officers specially appointed for the purpose, and it can be taken in payment of duties, and come into general circulation. You must not look upon it with suspicion. At the same time rogues, sharpers, and the like, are hereby strictly forbidden to fabricate spurious imitations of this new Eagle Dollar, with a view to their own profit.
And should they dare to set this prohibition at defiance, and fabricate false coin, they shall, upon discovery, most assuredly be arrested and punished. Let every one obey with trembling! Let there be no disobedience!
In 1874, trade dollars began appearing in American commerce.In early 1875, Congress passed the Specie Redemption Act, allowing the Treasury to pay out silver coins in exchange for paper currency. That act, combined with a drop in the price of silver, caused hoarded or exported silver coins to reappear in commerce within the United States. Many trade dollars were reimported, especially to California. After the value of silver began to decline and the intrinsic value of the coins fell below one dollar, bullion depositors began having their silver struck as trade dollars and selling them wholesale to be distributed throughout the country. Bullion producers opted to coin their silver into trade dollars because the Coinage Act of 1873 specified that silver brought to the Mint could only be struck as such or cast into bars.
Congress considered raising the five-dollar legal tender limit on trade dollars,but instead passed a bill that officially demonetized the trade dollar on July 22, 1876; the Secretary of the Treasury was directed by the act to strike no more of the coins than necessary for use in trade. Despite the demonetization of the trade dollar, bullion producers continued to place the coins into the American market, resulting in an estimated seven million coins circulating within the United States, of which more than four million were placed in circulation in 1877. Despite the 1876 act, it was not until October 15, 1877 that Sherman (now Secretary of the Treasury) finally ordered that the mints not accept orders for trade dollars. On November 5, apparently believing a false report that additional supplies were needed for the Chinese New Year, he rescinded his order, finally ending orders for trade dollars on February 22, 1878.
Linderman ordered a review of the success of the trade dollar in China.It was discovered that the coins circulated reasonably well in southern China, but usage in the north was limited. As the price of silver decreased, employers in the United States began paying workers in trade dollars purchased at a discount. The situation frustrated the public, as the coins were widely disliked and many banks and businesses refused to accept them. In response, many towns, mostly in the western states, set a fixed value on trade dollars. Businesses which did accept trade dollars to avoid offending customers could not deposit them in banks or use them to pay taxes, and sold them to brokers. The brokers in turn recirculated the coins by selling them at a discount from face value to employers who included them in workers' pay packets. In 1883, members of the New York Mercantile Exchange petitioned Congress to allow redemption of the coins by the government.
Bullion prices continued to drop through the 1880s, increasing the loss by anyone forced to sell at melt value after accepting a trade dollar at face value.Despite the support of Secretary of the Treasury Charles J. Folger, the question of the redemption of the trade dollar became caught up in controversy over the heavy coinage of the new Morgan dollar under the inflationary Bland–Allison Act. Silver interests objected to the silver from redeemed trade dollars being counted towards the Mint's monthly quota under the act, preferring to sell newly mined silver instead, and opposed acts which so provided. It was not until 1887 that Congress, ostensibly to relieve the poor (though most trade dollars were by then in the hands of speculators), provided for the redemption of unmutilated trade dollars. The act, which did not count the redeemed silver towards the Bland–Allison Act quota, passed into law on February 14, 1887, when the ten-day period which President Grover Cleveland had to either sign or veto it expired with no action by the President. Many coins were not redeemable due to chop marks or holes applied by Chinese businessmen, which was done to affirm the coin's silver content. The dollars were only redeemable for six months, and the recovered silver was struck into dimes, quarters, and half dollars.
Numismatic historian Walter Breen criticized both the legal tender provision and the coin in general, stating that the coin's issuance was "an expensive mistake – its motivation mere greed, its design a triumph of dullness, its domestic circulation and legal tender status a disastrous provision of law leading only to ghastly abuses." During the 1870s an attempt by Japan to introduce its own trade dollar to China fared no better.
Trade dollars were again made legal tender by the Coinage Act of 1965, which stated in part "All coins and currencies of the United States (including Federal Reserve notes and circulating notes of Federal Reserve banks and national banking associations), regardless of when coined or issued, shall be legal tender for all debts, public and private, public charges, taxes, duties and dues."However, the numismatic and bullion value of any trade dollar far exceeds its face value of one dollar. Because of its demand by collectors a large number of counterfeits exist made with base metal, and buyers should exercise caution when purchasing specimens.
The Coinage Act of 1873 or Mint Act of 1873, 17 Stat. 424, was a general revision of the laws relating to the Mint of the United States. In abolishing the right of holders of silver bullion to have their metal struck into fully legal tender dollar coins, it ended bimetallism in the United States, placing the nation firmly on the gold standard. Because of this, the act became contentious in later years, and was denounced by some as the "Crime of '73".
A nickel is a five-cent coin struck by the United States Mint. Composed of cupronickel, the piece has been issued since 1866. Its diameter is 0.835 inches (21.21 mm) and its thickness is 0.077 inches (1.95 mm).
The two-cent piece was produced by the Mint of the United States for circulation from 1864 to 1872 and for collectors in 1873. Designed by James B. Longacre, there were decreasing mintages each year, as other minor coins such as the nickel proved more popular. It was abolished by the Mint Act of 1873.
The Franklin half dollar is a coin that was struck by the United States Mint from 1948 to 1963. The fifty-cent piece pictures Founding Father Benjamin Franklin on the obverse and the Liberty Bell on the reverse. A small eagle was placed to the right of the bell to fulfill the legal requirement that half dollars depict the figure of an eagle. Produced in 90 percent silver with a reeded edge, the coin was struck at the Philadelphia, Denver, and San Francisco mints. As of April 26, 2019, the melt value of the $0.50 coin was approximately $5.46.
The American twenty-cent piece is a coin struck from 1875 to 1878, but only for collectors in the final two years. Proposed by Nevada Senator John P. Jones, it proved a failure due to confusion with the quarter, to which it was close in both size and value.
The Morgan dollar is a United States dollar coin minted from 1878 to 1904, in 1921, and beginning again in 2021. It was the first standard silver dollar minted since the passage of the Coinage Act of 1873, which ended the free coining of silver and the production of the previous design, the Seated Liberty dollar. The coin is named after its designer, United States Mint Assistant Engraver George T. Morgan. The obverse depicts a profile portrait representing Liberty, modeled by Anna Willess Williams, while the reverse depicts an eagle with wings outstretched. The mint mark, if present, appears on the reverse above between D and O in "Dollar".
The Seated Liberty dollar was a dollar coin struck by the United States Mint from 1840 to 1873 and designed by its chief engraver, Christian Gobrecht. It was the last silver coin of that denomination to be struck before passage of the Coinage Act of 1873, which temporarily ended production of the silver dollar for American commerce. The coin's obverse is based on that of the Gobrecht dollar, which had been minted experimentally from 1836 to 1839. However, the soaring eagle used on the reverse of the Gobrecht dollar was not used; instead, the United States Mint (Mint) used a heraldic eagle, based on a design by late Mint Chief Engraver John Reich first utilized on coins in 1807.
The Gobrecht dollar, minted from 1836 to 1839, was the first silver dollar struck for circulation by the United States Mint since production of that denomination was officially halted in 1806. The coin was struck in small numbers to determine whether the reintroduced silver dollar would be well received by the public.
The Draped Bust dollar is a United States dollar coin minted from 1795 to 1803, and was reproduced, dated 1804, into the 1850s. The design succeeded the Flowing Hair dollar, which began mintage in 1794 and was the first silver dollar struck by the United States Mint. The designer is unknown, though the distinction is usually credited to artist Gilbert Stuart. The model is also unknown, though Ann Willing Bingham has been suggested.
The Flowing Hair dollar was the first dollar coin issued by the United States federal government. The coin was minted in 1794 and 1795; its size and weight were based on the Spanish dollar, which was popular in trade throughout the Americas.
The Flying Eagle cent is a one-cent piece struck by the Mint of the United States as a pattern coin in 1856 and for circulation in 1857 and 1858. The coin was designed by Mint Chief Engraver James B. Longacre, with the eagle in flight based on the work of Longacre's predecessor, Christian Gobrecht.
The Shield nickel was the first United States five-cent piece to be made out of copper-nickel, the same alloy of which American nickels are struck today. Designed by James B. Longacre, the coin was issued from 1866 until 1883, when it was replaced by the Liberty Head nickel. The coin takes its name from the motif on its obverse, and was the first five-cent coin referred to as a "nickel"—silver pieces of that denomination had been known as half dimes.
The three-dollar piece was a gold coin produced by the United States Bureau of the Mint from 1854 to 1889. Authorized by the Act of February 21, 1853, the coin was designed by Mint Chief Engraver James B. Longacre. The obverse bears a representation of Lady Liberty wearing a headdress of a Native American princess and the reverse a wreath of corn, wheat, cotton, and tobacco.
The gold dollar or gold one-dollar piece is a gold coin that was struck as a regular issue by the United States Bureau of the Mint from 1849 to 1889. The coin had three types over its lifetime, all designed by Mint Chief Engraver James B. Longacre. The Type 1 issue has the smallest diameter of any United States coin minted to date.
The Coinage Act of 1965, Pub.L. 89–81, 79 Stat. 254, enacted July 23, 1965, eliminated silver from the circulating United States dime and quarter dollar coins. It also reduced the silver content of the half dollar from 90 percent to 40 percent; silver in the half dollar was subsequently eliminated by a 1970 law.
The copper-nickel three-cent piece, often called a three-cent nickel piece or three-cent nickel, was designed by US Mint Chief Engraver James B. Longacre and struck by the United States Bureau of the Mint from 1865 to 1889. It was initially popular, but its place in commerce was supplanted by the five-cent piece, or nickel.
The three-cent silver, also known as the three-cent piece in silver or trime, was struck by the Mint of the United States for circulation from 1851 to 1872, and as a proof coin in 1873. Designed by the Mint's chief engraver, James B. Longacre, it circulated well while other silver coinage was being hoarded and melted, but once that problem was addressed, became less used. It was abolished by Congress with the Coinage Act of 1873.
The Liberty Head double eagle or Coronet double eagle is an American twenty-dollar gold piece struck as a pattern coin in 1849, and for commerce from 1850 to 1907. It was designed by Mint of the United States Chief Engraver James B. Longacre.
The 1804 dollar or Bowed Liberty Dollar was a dollar coin struck by the Mint of the United States, of which fifteen specimens are currently known to exist. Though dated 1804, none were struck in that year; all were minted in the 1830s or later. They were first created for use in special proof coin sets used as diplomatic gifts during Edmund Roberts' trips to Siam and Muscat.
The Coinage Act of 1853, 10 Stat. 160, was a piece of legislation passed by the United States Congress which lowered the silver content of the silver half dime, dime, quarter dollar, and half dollar, and authorized a three dollar gold piece. Although intending to stabilize the country's silver shortage, it, in effect, pushed the United States closer to abandoning bimetallism entirely and adopting the gold standard.
|Wikimedia Commons has media related to Trade dollar (United States coin) .|