Susan B. Anthony dollar

Last updated

Susan B. Anthony
United States Of America
Value1 U.S. dollar
Mass8.1 g (0.260  troy oz)
Diameter26.5 mm (1.04 in)
Thickness2.00 mm (0.08 in)
EdgeReeded
Composition.75 copper, .25 nickel, clad to pure copper core.
Years of minting1979–1981, 1999
Mint marksP (Philadelphia Mint)
D (Denver Mint)
S (San Francisco Mint)
Obverse
1981-S SBA$ Type Two Deep Cameo.jpg
The obverse of a Susan B. Anthony dollar
DesignRight-facing profile of Susan B. Anthony
Designer Frank Gasparro
Design date1979
Reverse
1981-S SBA$ Type Two Deep Cameo.jpg
The reverse of a Susan B. Anthony dollar
DesignAn eagle clutching a laurel branch in its talons displayed over a landscape of the Moon, based on the Apollo 11 mission insignia
DesignerFrank Gasparro
Design date1971

The Susan B. Anthony dollar is a United States dollar coin minted from 1979 to 1981 when production was suspended due to poor public acceptance, and then again in 1999. Intended as a replacement for the larger Eisenhower dollar, the new smaller one-dollar coin went through testing of several shapes and compositions, but all were opposed by the vending machine industry, a powerful lobby affecting coin legislation. Finally, a round planchet with an eleven-sided inner border was chosen for the smaller dollar.

Contents

The original design for the smaller dollar coin depicted an allegorical representation of Liberty on the obverse, but organizations and individuals in Congress called for the coin to depict a real woman. Several proposals were submitted, and social reformer Susan B. Anthony was selected as the design subject. The reverse design of the Eisenhower dollar was retained, an engraving of the Apollo 11 mission insignia showing an eagle landing on the Moon. Both sides of the coin, as well as the rejected Liberty design, were created by Frank Gasparro, the Chief Engraver of the United States Mint.

One and a half billion coins were struck in anticipation of considerable public demand, but the Anthony dollar was poorly received, in part because of confusion caused by its similarity in size and metallic composition to the quarter. Despite its poor reception, the coins eventually began seeing use in vending machines and mass transit systems, depleting the surplus by the late 1990s. In 1997, Congress passed a law authorizing the mintage of a new gold-colored one-dollar coin depicting Sacagawea, but production could not begin quickly enough to meet demand. As a stopgap measure, until the new Sacagawea dollar coin could be issued, the Anthony dollar was struck again in 1999 after an eighteen-year hiatus; the series was retired the following year.

Special coins for sale to collectors were struck in proof finish through the run of the Susan B. Anthony dollar, and some minting variations are valuable to collectors. However, most circulation strikes remained in government stockpiles for several years after minting, so many of the coins are available in uncirculated grades, and the premium over face value is minimal.

Background

1974S Eisenhower Obverse.jpg
1974S Eisenhower Reverse.jpg
The Eisenhower dollar was authorized by a bill signed into law on December 31, 1970.

In the early 1960s, as the price of silver rose, Treasury Department vaults were depleted of silver dollars by the public. [1] No silver dollars had been minted in the United States since 1935, [2] and a shortage developed in the Western United States, especially in areas in which gambling was common. As a result, Congress voted to authorize the production of 45 million new silver Peace dollars on August 3, 1964. [3] However, the move drew strong condemnation from critics and the public who believed that the issuance of the coins was a waste of resources and influenced by special interests, and that they would be quickly removed from circulation. [4] A total of 316,076 1964-D Peace dollars were struck before production was ordered suspended. The coins were melted soon afterwards, [5] and the Coinage Act of 1965, enacted on July 23, 1965, forbade all production of dollar coins for a period of five years. [6]

On May 12, 1969, the Joint Commission on the Coinage, a panel of 24 individuals organized by the 1965 Coinage Act, [7] recommended resumption of dollar coin production following a study conducted by a Congressional task force. [8] On October 1 and 3, 1969, a hearing before the U.S. House of Representatives discussed the proposed legislation to authorize the coin, in a copper-nickel clad composition, with the 1.5-inch (38 mm) same diameter of the former silver dollars. [9] A provision was added requiring the coin to depict former President Dwight D. Eisenhower, who had died earlier that year, on the obverse and a design "emblematic of the symbolic eagle of Apollo 11 landing on the moon" on the reverse. [10] [lower-alpha 1] President Richard Nixon signed the bill into law on December 31, 1970. [10] Both the obverse and reverse designs were created by Frank Gasparro, the Chief Engraver of the United States Mint. [2]

As with previous dollar coins, the new Eisenhower dollar proved unpopular with the public, and very few of the coins were found in circulation. [12] In 1976, the Research Triangle Institute conducted a survey of United States coinage. Among other things, they recommended the half dollar coin, which by then saw declining use, be eliminated from production, and the size of the dollar be reduced. [13] Their report read in part:

A conveniently-sized dollar coin would significantly broaden the capabilities of consumers for cash transactions, especially with machines. Members of the automatic merchandising industry have expressed a strong interest in a smaller dollar, indicating their willingness to adapt their machinery to its use. [13]

Numismatic historian David L. Ganz suggested that Eisenhower, a Republican, was chosen as a means of balancing the half dollar, depicting Democrat John F. Kennedy. [14] In a 1977 paper, he agreed with the findings of the institute, suggesting that both coins should be eliminated; the half dollar production ceased entirely, and the dollar replaced by one of smaller diameter and with a different design. [14] Treasury officials desired the small dollar coin as a cost-saving measure; Mint Director Stella Hackel estimated that replacing half of the issued one dollar bills with smaller one dollar coins would save $19 million ($85.2 million today) in annual production costs. [15] [lower-alpha 2]

Design history

Liberty design

The Mint began preparation for the reduced-diameter dollar coin in 1976. Although no legislation had yet been introduced, Treasury officials anticipated a positive reception from Congress, and the coin had near unanimous support from the Mint and the vending machine industry, an influential lobby in the area of coin design and creation. [17] In 1977, Treasury Secretary Michael Blumenthal publicly endorsed a smaller dollar coin and suggested that an allegorical representation of Liberty would be a suitable subject for the coin. [18]

Gasparro Liberty obverse.jpeg
Gasparro Liberty reverse.jpeg
Gasparro's original design for the obverse and reverse of the coin which ultimately became the Susan B. Anthony dollar

Chief Engraver Gasparro was tasked with creating a design for the proposed coin. His obverse design depicted a bust of Liberty, while his reverse depicted a soaring eagle. [19] The bust was pictured along with a pole, atop which sat a Phrygian cap, a symbol used to represent freedom. [19] Gasparro's Liberty design was based on a similar obverse that he created for a 1969 American Numismatic Association convention medal. [19] The reverse, depicting an eagle flying above a mountain against the rising Sun, was originally created by Gasparro in 1967 for a proposed commemorative half dollar. [20] Describing the reverse design, Gasparro stated that it was meant to symbolize "a new day being born". [21]

The design was reviewed by the Commission of Fine Arts, and in an April 29, 1976, letter, Commission member J. Carter Brown praised the design:

I believe this would be a superb design for United States Coinage, rooted as it is in a great tradition, being based on the 'Liberty Cap cent' of 1794, following Augustin Dupré's Libertas Americana medal commemorating Saratoga and Yorktown (1777–1781). [22]

A bill to reduce the diameter of the dollar from 1.5 inches (38 mm) to 1.043 inches (26.5 mm) and the weight from 22.68 grams to 8.5 grams was introduced to the House of Representatives on May 1, 1978. [23] The bill was introduced to the Senate on May 3, and the proposed weight was reduced from 8.5 grams to 8.1 grams. [24] The Mint conducted experiments involving eight-, ten-, eleven- and thirteen-sided coins, [19] but it was decided that the dollar would be round, as costly modifications would be required to update vending machinery to accept other shapes. [25] Instead, the bill prescribed an eleven-sided inner border, which was intended to aid identification by sight and by feel for the visually handicapped. [26]

Selection of Susan B. Anthony

Treasury officials officially recommended Gasparro's design, which they referred to as a "modernized version of the classic Liberty design". [27] On May 3, 1978, Wisconsin's William Proxmire introduced legislation in the Senate which was identical to the Treasury proposal, except for mandating a design which was altered to social reformer Susan B. Anthony in place of the allegorical Liberty. [28] On May 15, Representatives Mary Rose Oakar and Patricia Schroeder introduced similar legislation to the House of Representatives. [23] Anthony was also recommended by members of the National Organization for Women, the Congresswomen's Caucus, the National Women's Political Caucus and the League of Women Voters. [29] In support of the proposed legislation, the League addressed a letter to Walter E. Fauntroy, chairman of the Subcommittee on Historic Preservation and Coinage, reading in part:

The League believes that the time has come, and is indeed long past, for the likeness of a prominent American woman to be placed on a denomination of U.S. currency. We believe strongly that the likeness should be that of an actual woman and not that of an imaginary or symbolic figure. Susan B. Anthony contributed immeasurably to the advancement of human dignity in this nation. It is entirely fitting and appropriate that her memory be honored through this measure. [30]

In addition, officials tallied suggestions sent to the Mint by the general public as to the subject of the dollar coin, and Susan B. Anthony had received the most support. [31]

1979 left-facing Susan B. Anthony design.jpeg
1979 right-facing Susan B. Anthony design.jpeg
Two drawings created by Gasparro as proposed designs for the Susan B. Anthony dollar obverse

Gasparro began work on his Susan B. Anthony design in June 1978, before the legislation was authorized by Congress. [32] He enlisted the help of a friend in conducting research on Anthony, which he felt was necessary before creating the design. [33] He referenced approximately six different images while creating the portrait of Anthony, but it was based largely on just two. [34] Gasparro created several different designs before receiving final approval. One of his portraits, depicting Anthony at age 28, was shown to Anthony's great-niece, Susan B. Anthony III, who rejected it on the grounds that it unnecessarily "prettified" her great-aunt, and she criticized another design depicting Anthony at age 84, which she believed made her appear too old. [35] [36] Gasparro made several alterations with the intent to depict her at age 50, at the peak of her influence as a social reformer, but no photographs of Anthony during that period are known to exist. [34] He eventually received approval after modification, later stating his belief that he had accurately portrayed Anthony. [34]

Initially, Gasparro expected that Congress would retain his soaring eagle reverse design to accompany the Susan B. Anthony obverse. [34] However, a late amendment introduced by Utah Senator Jake Garn altered the legislation to maintain the Apollo 11 design in use on the Eisenhower dollar reverse. [37]

The bill was approved by Congress and signed into law by President Jimmy Carter on October 10, 1978, [38] and production of Eisenhower dollars ceased during that year. [39] After he signed the bill into law, Carter issued a statement, saying in part that he was confident that "this act—and the new dollar—will substantially improve our coinage system as well as cutting Government coin production costs". [40] He went on to declare his approval of the decision to depict Anthony on the coins:

I am particularly pleased that the new dollar coin will—for the first time in history—bear the image of a great American woman. The life of Susan B. Anthony exemplifies the ideals for which our country stands. The 'Anthony dollar' will symbolize for all American women the achievement of their unalienable right to vote. It will be a constant reminder of the continuing struggle for the equality of all Americans. [40]

Design criticism

Numismatists criticized the pairing of Susan B. Anthony's portrait with a design based on the Apollo 11 insignia. Apollo 11 insignia.png
Numismatists criticized the pairing of Susan B. Anthony's portrait with a design based on the Apollo 11 insignia.

Gasparro regarded the Anthony design as the most important of his career. Remarking on the public perception of the coin, Gasparro related that "it's become part of a social movement. This new dollar's more than a coin; it's an issue." [32] The decision to use a portrait of Susan B. Anthony in place of the allegorical Liberty was met with criticism by most numismatists, who believed that the Liberty design had far greater artistic merit. [32] Art critic and numismatist Cornelius Vermeule was highly critical of the obverse design replacement, as well as the decision to continue use of the Apollo 11 design. [41] Vermeule noted that although Eisenhower's administration established the National Aeronautics and Space Administration, Anthony had no connection to the Moon landing or the U.S. space program. [42] Commenting on the obverse and reverse pairing, he stated his belief that it was "a hasty marriage and a bad one". [43] Although he believed that Gasparro's Anthony design was well executed, sculptor Robert Weinman criticized the decision to depict Anthony. [44] Concerned about the possibility of other groups seeking representation on the coinage in response to its passage, Weinman characterized the Susan B. Anthony dollar legislation as a "billboard or campaign button approach to a national coin". [44]

Reception

The similarity in size and material composition between the new Susan B. Anthony dollar (left) and the Washington quarter (right) caused immediate confusion in transactions. Small dollar and quarter comparison.jpeg
The similarity in size and material composition between the new Susan B. Anthony dollar (left) and the Washington quarter (right) caused immediate confusion in transactions.

The first Susan B. Anthony dollars were struck at the Philadelphia Mint on December 13, 1978. [45] First strikes at the Denver and San Francisco Mints followed on January 9, 1979 and January 29, respectively. [46] Mint officials feared that the coins would be hoarded upon release, so they ordered the creation of a stockpile consisting of 500 million coins prior to the release date in July 1979. [47] The dollars all bore a mint mark denoting their place of origin: 'P' for the Philadelphia Mint, 'D' for the Denver Mint and 'S' for the San Francisco Mint. The Anthony dollar was the first coin to bear a 'P' mint mark since the Jefferson nickel issued during World War II; other coins struck there were left without a mint mark to note their place of origin. [48] In 1980, the 'P' mint mark was added to all other circulating coins, except the cent, struck in Philadelphia. [48]

The Treasury Department, in cooperation with the Federal Reserve, undertook a $655,000 marketing campaign to educate bank employees and members of the public about the new coin, [49] and the vending industry engaged in a $100 million effort to retrofit machines to accept the coins. [50]

Despite the marketing attempts, the coin received an overwhelmingly negative reception from the public. [51] [52] In 1979, 66% of the national population disliked the coin. [53] Less than two millimeters in diameter larger than the quarter and struck in the same copper-nickel composition, the Susan B. Anthony dollar was widely confused for that denomination in transactions. [52] Mint Director Hackel noted the difference in weight and design between the two coins and expressed her belief that the dollar would eventually find favor with the public, suggesting that the coin would become "customary to the American people in time". [52] In the months following its release, complaints mounted and public transportation and many establishments throughout the country began refusing to accept them in payment. [50] On July 13, 1979, California Representative Jerry Lewis introduced a bill to the House of Representatives with the intent to increase the size of the coin to aid identification. [54] Discussing the bill, which was never passed, Lewis remarked that the Anthony dollar had come to be known derisively as the "Carter quarter", due to its size and association with the President. [55]

In total, 757,813,744 dollar coins dated 1979 were struck for circulation at the Philadelphia, Denver and San Francisco Mints. [56] Demand remained low through 1980, and the circulation strikes for that year totaled 89,660,708. [56] Due to its persistent unpopularity, production of Anthony dollars for circulation was suspended, and 9,742,000 1981 dollars were struck across all three Mints exclusively for sale to collectors; this mintage marked the end of production. [56] At the close of production, the Treasury encountered a dilemma: the Mint struck a large number of dollars in anticipation of great public demand, resulting in a surplus of 520,000,000 coins in 1981. [57] Melting the coins was impractical; the cost of manufacture was approximately 2 cents, and the 98 cents earned from seignorage was applied to the national debt. [57] [58] Had the coins been melted, their seignorage would have been added to the debt. [58] Accordingly, the coins were placed in government storage, to be dispensed as needed. [57]

The coin's design did have repercussions north of the border; when Canada introduced its new one-dollar coin in 1987, its dimensions were made similar so that vending machine specifications could be common between the two nations. [59]

When the Baltimore Metro opened in 1984, it used the Susan B. Anthony dollar coin as tokens with which to buy tickets. It became the largest single user of Susan B. Anthony dollar coins in its history. [60]

1999 reissue

After passage of the United States $1 Coin Act of 1997, the Mint struck pattern coins, depicting Martha Washington and dated 1759, to test a more distinctive, gold-colored coin. Martha Washington dollar pattern obverse NN.jpg
After passage of the United States $1 Coin Act of 1997, the Mint struck pattern coins, depicting Martha Washington and dated 1759, to test a more distinctive, gold-colored coin.

Despite their unpopularity in transactions, Anthony dollars began to see heavy use in over 9,000 stamp-dispensing machines situated in United States Postal Service buildings across the country beginning in the early 1990s. Additionally, the coins finally began to be used regularly with many mass-transit systems and vending-machine operations. [61] Various propositions were discussed in Congress since the last dollars were produced in 1981, but no action was taken to issue a new coin until the Treasury's stores of Anthony dollars became depleted by the mid-1990s. [61] In February 1996, the vaults totaled approximately 229,500,000 coins, but that number was reduced to approximately 133,000,000 by the end of 1997. [61] Faced with the necessity of striking more Susan B. Anthony dollars to fill the demand, the Treasury supported legislation authorizing a new dollar coin that would not be confused with the quarter. Legislation authorizing a dollar coin in a gold-colored composition and with a plain edge was introduced to the House and Senate in 1997, where it eventually received approval with a provision calling for it to depict Native American guide Sacagawea. [61] On December 1, 1997, President Bill Clinton signed the 50 States Commemorative Coin Program Act into law. The Act, which authorized the creation of the 50 State Quarters program, included a section entitled "United States $1 Coin Act of 1997". [62] That section officially authorized what became the Sacagawea dollar. [63]

Following passage of the act, a series of test strikes depicting Martha Washington were carried out to test various gold-colored alloys. [64] Although the act provided for creation of the new coin, it also allowed for resumption of striking the Anthony design as a stop-gap measure until production began on the gold-colored dollar. [62] Nearing depletion of Treasury stockpiles, on May 20, 1999, the U.S. Mint announced that production of the Susan B. Anthony dollar would resume. [65] In total, 41,368,000 Anthony dollars dated 1999 were struck for circulation at the Philadelphia and Denver mints. Proof strikes were carried out at the Philadelphia mint; no 1999 dollars were struck at the San Francisco mint. [56] The Anthony design was officially retired in 2000, when the new Sacagawea dollar entered production. [66]

Collecting

As few Susan B. Anthony dollars circulated, many remain available in uncirculated condition and are worth little above face value. [67] However, some date and mint mark varieties are relatively valuable. The 1981 coins, having been issued only to collectors, are valued above the other circulation strikes in the series. [68] In addition, a well-known variety of the 1979 circulation strikes from Philadelphia, on which the date appears nearer to the rim, commands a higher price than the regular issue. [69] [70]

All dates of the dollar also exist in proof finish. The 1999 coins were sold as standalone proof strikes, rather than as part of a larger proof set, as the 1979, 1980, and 1981 issues were offered. [71] The 1999 proof was minted exclusively at the Philadelphia Mint, and bears a "P" mint mark, while all other proof Anthony dollars were minted at San Francisco and bear the "S" of that Mint. [56] Some 1979 and 1981 proofs bear a mint mark which was applied to the coinage dies with a different punch, causing them to have a more legible appearance. They are considered scarce and are valued considerably higher than normal proofs of the series. [56]

See also

Explanatory notes

  1. Gasparro's alternative design depicted a flying eagle, but after details were leaked to Congress, the bird was mandated to appear on the coin as it was depicted on the Apollo 11 insignia. [11]
  2. Although dollar bills are less costly to print, a dollar coin is considerably more durable and requires much less frequent replacement. [16]

Citations

  1. Yeoman, 2008, p. 28.
  2. 1 2 Yeoman, 2008, p. 222.
  3. Stevenson, 1964.
  4. Burdette, 2005, pp. 98–101.
  5. Yeoman, 2008, p. 221.
  6. Public Law 89–81.
  7. Treasury Department, 1968.
  8. U.S. House of Representatives, 1969, pp. 3, 40.
  9. U.S. House of Representatives, 1969, p. 1.
  10. 1 2 Public Law 91–607.
  11. Julian, 1993, p. 2851.
  12. Bailey, 1974, p. 9.
  13. 1 2 U.S. Senate, 1978b, p. 30.
  14. 1 2 Ganz, 1977, p. 205.
  15. U.S. Senate, 1978b, p. 110.
  16. Caskey & St. Laurent, 1994, pp. 497–498.
  17. Ganz, 1976, p. 54.
  18. Julian, 1993, p. 2929.
  19. 1 2 3 4 Ganz, 1976, p. 55.
  20. Ganz, 1976, pp. 55–56.
  21. Ganz, 1976, p. 56.
  22. U.S. House of Representatives, 1978, p. 13.
  23. 1 2 U.S. House of Representatives, 1978, p. 2.
  24. U.S. Senate, 1978a, pp. 1–2.
  25. Logan, 1979a, p. 46.
  26. U.S. House of Representatives, 1978, p. 7.
  27. U.S. Senate, 1978a, pp. 5–6.
  28. U.S. House of Representatives, 1978, pp. 36–37.
  29. U.S. House of Representatives, 1978, pp. 104–106.
  30. U.S. House of Representatives, 1978, p. 107.
  31. U.S. House of Representatives, 1978, p. 97.
  32. 1 2 3 Reiter, 1979a, p. 116.
  33. Reiter, 1979a, pp. 116–117.
  34. 1 2 3 4 Reiter, 1979a, p. 117.
  35. Martin, 2010, pp. 224–225.
  36. Woo, 2001.
  37. U.S. Senate, 1978a, p. 2.
  38. Public Law 95–447.
  39. Yeoman, 2008, p. 224.
  40. 1 2 Carter, 1979, p. 1737.
  41. Reiter, 1979b, p. 46.
  42. Reiter, 1979b, p. 48.
  43. Reiter, 1979b, pp. 48–50.
  44. 1 2 Reiter, 1979b, p. 50.
  45. Stevens & Ganz, 1979, p. 33.
  46. Hackel, 1979, p. 25.
  47. Julian, 1993, p. 2931.
  48. 1 2 Martin, 2010, p. 225.
  49. Wolenik, 1979, p. 8.
  50. 1 2 Ganz, 1979, p. 44.
  51. Schwager, 2014, p. 60.
  52. 1 2 3 Logan, 1979b, p. 42.
  53. "Susan B. Anthony Coin Receives a Poor Rating". The New York Times. October 11, 1979. ISSN   0362-4331 . Retrieved September 30, 2022.
  54. U.S. House of Representatives, 1979.
  55. The San Bernardino County Sun, 1979, p. C-5.
  56. 1 2 3 4 5 6 Yeoman, 2008, p. 225.
  57. 1 2 3 Reiter, 1981.
  58. 1 2 Julian, 1993, p. 2932.
  59. Lee, Robert (March 25, 1986), "New coin to replace dollar bill", Ottawa Citizen, p. A1, retrieved April 14, 2013
  60. Valentine, Paul W. (April 2, 1984). "Underground Coin". Washington Post. Archived from the original on November 16, 2017.
  61. 1 2 3 4 Roach, 2010, p. 22.
  62. 1 2 Public Law 105–124.
  63. Roach, 2010, pp. 22–24.
  64. Gilkes, 2008, p. 82.
  65. U.S. Mint, 1999.
  66. Yeoman, 2008, pp. 225–226.
  67. Krause, 1999, p. 64.
  68. Yeoman, 2008, pp. 224–225.
  69. Krause, 1999, pp. 64–65.
  70. Gibbs, William T. (July 6, 2018). "Inside Coin World: Near Date or Wide Rim dollar". Coin World. Retrieved June 4, 2022.
  71. Schwager, 2014, p. 61.

General bibliography

Preceded by Dollar coin of the United States
1979–1981, 1999
Succeeded by

Related Research Articles

<span class="mw-page-title-main">United States Mint</span> Government agency that produces circulating coinage for the United States

The United States Mint is a bureau of the Department of the Treasury responsible for producing coinage for the United States to conduct its trade and commerce, as well as controlling the movement of bullion. The U.S. Mint is one of two U.S. agencies that produce money in the case of minting coinage; the other is the Bureau of Engraving and Printing, which prints paper currency. The first United States Mint was created in Philadelphia in 1792, and soon joined by other centers, whose coins were identified by their own mint marks. There are currently four active coin-producing mints: Philadelphia, Denver, San Francisco, and West Point.

<span class="mw-page-title-main">Dollar coin (United States)</span> Current denomination of United States currency

The dollar coin is a United States coin with a face value of one United States dollar. Dollar coins have been minted in the United States in gold, silver, and base metal versions. Dollar coins were first minted in the United States in 1794.

<span class="mw-page-title-main">United States Bicentennial coinage</span> Three US coins minted in 1975–1976

The United States Bicentennial coinage is a set of circulating commemorative coins, consisting of a quarter, half dollar and dollar struck by the United States Mint in 1975 and 1976. Regardless of when struck, each coin bears the double date 1776–1976 on the normal obverses for the Washington quarter, Kennedy half dollar and Eisenhower dollar. No coins dated 1975 of any of the three denominations were minted.

<span class="mw-page-title-main">Eisenhower dollar</span> United States dollar coin

The Eisenhower dollar is a one-dollar coin issued by the United States Mint from 1971 to 1978; it was the first coin of that denomination issued by the Mint since the Peace dollar series ended in 1935. The coin depicts President Dwight D. Eisenhower on the obverse, and a stylized image honoring the 1969 Apollo 11 Moon mission on the reverse. Both sides were designed by Frank Gasparro, with the reverse based on the mission patch designed by astronaut Michael Collins. It is the only large-size U.S. dollar coin whose circulation strikes contained no silver.

<span class="mw-page-title-main">Twenty-cent piece (United States coin)</span> Coin of the United States (1875–1878)

The American twenty-cent piece is a coin struck from 1875 to 1878, but only for collectors in the final two years. Proposed by Nevada Senator John P. Jones, it proved a failure due to confusion with the quarter, to which it was close in both size and value.

<span class="mw-page-title-main">Morgan dollar</span> U.S. dollar coin (1878–1904, 1921, 2021–present)

The Morgan dollar is a United States dollar coin minted from 1878 to 1904, in 1921, and beginning again in 2021 as a collectible. It was the first standard silver dollar minted since the passage of the Coinage Act of 1873, which ended the free coining of silver and the production of the previous design, the Seated Liberty dollar. It contained 412.5 Troy grains of 90% pure silver. The coin is named after its designer, United States Mint Assistant Engraver George T. Morgan. The obverse depicts a profile portrait representing Liberty, modeled by Anna Willess Williams, while the reverse depicts an eagle with wings outstretched. The mint mark, if present, appears on the reverse above between D and O in "Dollar".

<span class="mw-page-title-main">Sacagawea dollar</span> US 1 dollar coin minted since 2000

The Sacagawea dollar is a United States dollar coin introduced in 2000, but subsequently minted only for niche circulation from 2002 onward. The coin generally failed to meet consumer and business demands. It is still generally accepted in circulation.

<span class="mw-page-title-main">Seated Liberty dollar</span> United States silver dollar coin minted from 1840 to 1873

The Seated Liberty dollar was a dollar coin struck by the United States Mint from 1840 to 1873 and designed by its chief engraver, Christian Gobrecht. It was the last silver coin of that denomination to be struck before passage of the Coinage Act of 1873, which temporarily ended production of the silver dollar for American commerce. The coin's obverse is based on that of the Gobrecht dollar, which had been minted experimentally from 1836 to 1839. However, the soaring eagle used on the reverse of the Gobrecht dollar was not used; instead, the United States Mint (Mint) used a heraldic eagle, based on a design by late Mint Chief Engraver John Reich first utilized on coins in 1807.

<span class="mw-page-title-main">Gobrecht dollar</span> US silver dollar coin (1836–1839)

The Gobrecht dollar, minted from 1836 to 1839, was the first silver dollar struck for circulation by the United States Mint after production of that denomination had been halted in 1806. The coin was struck in small numbers to determine whether the reintroduced silver dollar would be well received by the public.

<span class="mw-page-title-main">Kennedy half dollar</span> 50-cent piece depicting John F Kennedy minted after his assassination in 1963

The Kennedy half dollar, first minted in 1964, is a fifty-cent coin issued by the United States Mint. Intended as a memorial to the assassinated 35th president of the United States John F. Kennedy, it was authorized by Congress just over a month after his death. Use of existing works by Mint sculptors Gilroy Roberts and Frank Gasparro allowed dies to be prepared quickly, and striking of the new coins began in January 1964.

<span class="mw-page-title-main">Washington quarter</span> US 25-cent coin minted since 1932

The Washington quarter is the present quarter dollar or 25-cent piece issued by the United States Mint. The coin was first struck in 1932; the original version was designed by sculptor John Flanagan.

<span class="mw-page-title-main">Lincoln cent</span> One-cent United States coin

The Lincoln cent is a one-cent coin that has been struck by the United States Mint since 1909. The obverse or heads side was designed by Victor David Brenner, as was the original reverse, depicting two stalks of wheat. The coin has seen several reverse, or tails, designs and now bears one by Lyndall Bass depicting a Union shield. All coins struck by the United States government with a value of 1100 of a dollar are called cents because the United States has always minted coins using decimals. The penny nickname is a carryover from the coins struck in England, which went to decimals for coins in 1971.

<span class="mw-page-title-main">American Arts Commemorative Series medallions</span> Gold bullion medallions minted 1980–1984

American Arts Commemorative Series Medallions are a series of ten gold bullion medallions that were produced by the United States Mint from 1980 to 1984. They were sold to compete with the South African Krugerrand and other bullion coins.

<span class="mw-page-title-main">California Diamond Jubilee half dollar</span> United States commemorative silver fifty-cent piece

The California Diamond Jubilee half dollar was a United States commemorative silver fifty-cent piece struck at the San Francisco Mint in 1925. It was issued to celebrate the 75th anniversary of California statehood.

<span class="mw-page-title-main">United States Sesquicentennial coinage</span> 1926 commemorative US half dollar and quarter eagle

The United States Sesquicentennial coin issue consisted of a commemorative half dollar and quarter eagle struck in 1926 at the Philadelphia Mint for the 150th anniversary of American independence. The obverse of the half dollar features portraits of the first president, George Washington, and the president in 1926, Calvin Coolidge, making it the only American coin to depict a president in his lifetime.

<span class="mw-page-title-main">Panama–Pacific commemorative coins</span> Series of five commemorative coins of the United States

The five Panama–Pacific commemorative coins were produced in connection with the 1915 Panama–Pacific International Exposition in San Francisco. Struck at that city's mint, the issue included round and octagonal $50 pieces. Excepting modern bullion coins, these two gold pieces are the highest denomination ever issued and the largest coins ever struck by the United States Mint. The octagonal $50 piece is the only U.S. coin to be issued that is not round.

<span class="mw-page-title-main">Connecticut Tercentenary half dollar</span> US commemorative 50-cent coin

The Connecticut Tercentenary half dollar, sometimes called the Connecticut half dollar, is a commemorative 50-cent piece struck by the United States Bureau of the Mint in 1935. The coin was designed by Henry Kreis and commemorates the 300th anniversary of the founding of Connecticut. Its obverse depicts the Charter Oak, where according to legend Connecticut's charter was hidden to save it from being confiscated by the English governor-general. An eagle appears on the coin's reverse side.

<span class="mw-page-title-main">York County, Maine, Tercentenary half dollar</span> Commemorative fifty-cent coin struck by the United States Mint

The York County, Maine, Tercentenary half dollar is a 50-cent commemorative coin minted in 1936 to mark the tercentenary of the founding of York County, Maine. The obverse shows Brown's Garrison, the fort around which York County was formed, while the reverse depicts the county's arms.

<span class="mw-page-title-main">Lynchburg Sesquicentennial half dollar</span> US coin worth 50 cents

The Lynchburg Sesquicentennial half dollar was a commemorative half dollar designed by Charles Keck and struck by the United States Bureau of the Mint in 1936, to celebrate the 150th anniversary of the 1786 incorporation of the independent city of Lynchburg, Virginia. The obverse of the coin depicts former Secretary of the Treasury and U.S. Senator Carter Glass, a native of Lynchburg. The reverse depicts a statue of the Goddess of Liberty, with Lynchburg sites behind her, including the Old Courthouse and the city's Confederate monument.

<span class="mw-page-title-main">Illinois Centennial half dollar</span> American commemorative coin

The Illinois Centennial half dollar is a commemorative 50-cent piece struck by the United States Bureau of the Mint in 1918. The obverse, depicting Abraham Lincoln, was designed by Chief Engraver George T. Morgan; the reverse, based on the Seal of Illinois, was by his assistant and successor, John R. Sinnock. Morgan's obverse is based on the statue by Andrew O'Connor.