Wyver | |
---|---|
Wyver Lane Nature Reserve | |
Map of Wyver | |
Location within Derbyshire | |
OS grid reference | SK342499 |
• London | 120 mi (190 km) SE |
Civil parish | |
District | |
Shire county | |
Region | |
Country | England |
Sovereign state | United Kingdom |
Post town | BELPER |
Postcode district | DE56 |
Police | Derbyshire |
Fire | Derbyshire |
Ambulance | East Midlands |
Wyver is a locality within Belper civil parish, which is in the Amber Valley district of Derbyshire, England. The area takes up the western bank of the River Derwent just north of the former mills of Belper. Although overwhelmingly rural, the area has some notable associations within that industry and has been used for various activities throughout that time, and in recognition of these it has been made part of the wider UNESCO designated Derwent Valley Mills World Heritage Site.
Wyver is surrounded by the following local places:
It is approximately 0.39 square miles (250 acres; 1.0 km2) in area, 1+1⁄4 miles (2.0 km) in length and 2⁄3 mile (1.1 km) in width, to the north of Belper parish, central in the Erewash district, and is to the centre south in the county of Derbyshire. The area is roughly bounded by land features such as the Belper to Belper Lane End road to the west and south, the River Derwent and the Midland Main Line railway (Derwent Valley Line branch) are to the east, and the Belper parish boundary is to the north.
The area is categorised within national biodiversity classifications as being within the Derbyshire lowlands and its Peak Fringe region, [1] in local surveys it is known as the Wyver Acid Pastures due to its unimproved acid grassland. [2] The wider parish has had several protected species visit and otters have been spotted in Wyver. From east to west, the area gently slopes upwards from its riverbank edge, and past Wyver Lane rises more steeply towards a hilltop near Belper Lane End. Much of the surrounding land is pasture or agricultural fields edged to the west by built development, with a few coppices including Wyver Wood to the north. Several footpaths lead into the area, primarily from Mount Pleasant, with other access from Belper Lane End and Alderwasley to the north. Only one paved route exists which is Wyver Lane, this is accessed via Mount Pleasant. The Wyver Lane Nature Reserve attracts many types of birds and landfowl.
Throughout much of the area surrounding the River Derwent, the bedrock consists of mudstones, siltstones and sandstones of Ashover Grit and Marsden formations, dating from 321–320 million years ago during the Carboniferous period. To the far north are sand and gravel deposits due to the geological feature known as the Allenton Terrace, which is the fluvial terrace of alluvium in the lower valley of the River Derwent that the area is built upon. The hilltop in the north west comprises Chatsworth grit made up of sandstone from the same era. [3] [4] [5]
The River Derwent forms nearly all the eastern edge of the area except for occasional incursions by the Midland Main Line in between meanders. Wyver Lane Nature Reserve is to the middle east of the area, it contains two shallow pools for migratory and wading birds. [6] Wyver Lane Pond is a 2 acres (0.81 ha) members-only fishing pool to the south east. [7]
Between Wyver Lane and the Derwent is low lying at 65 metres (213 ft). It then rises towards Belper Lane and Mount Pleasant, and most steeply to the north west by Wyver Wood, the peak height there being 167 metres (548 ft). [8]
Any prehistoric history is obscure, and artefactual finds have not been recorded locally. Although Wyver was not described in the 1086 Domesday Survey commissioned by the king of the period William the Conqueror, land in the surrounding areas of the Derwent at Shottle and Bradley was held pre-conquest by Gamal and Siward respectively, and both afterwards by Henry de Ferrers. [9] [10] Bradley was an earlier name for the manor of Belper, and more widely was also used to refer to the Wyver region. [11] In 1266, the estates of Robert de Ferrers, 6th Earl of Derby, a protagonist in the Second Barons' War, were confiscated by Henry III, and granted to his son the Earl of Leicester, known as Edmund Crouchback. From that period it remained in the hands of the Duchy of Lancaster which was a private holding of future monarchs, and became part of the Duffield Frith royal forest, within its Duffield (sometimes called Chevin) ward. [12] The area was by medieval times in the Appletree hundred, within Duffield ancient parish and Belper chapelry. [13] An early form of the Wyver name was first used in 1387 within documents of the estate, including Wybald(e)shagh and Wibald(e)shagh. [14] The area remained occasionally referred to under this ownership through to the 17th century, and was considered during this period to be waste. [15] In 1633, to maximise income to the Crown from unused royal forests, efforts were made to disafforest the Frith by means of land surveys, subsequent enclosure and the apportionment of plots to locals, although resistance from them due to concerns around the quantity and quality of the final plots caused Parliament to abandon the process and revert the Chevin ward to commons until 1786 when it was revisited and completed. [16] From 1777 Jedediah Strutt, who was an associate of Richard Arkwright of Cromford Mill fame, began to purchase plots to develop cotton mills in Belper to the east of the Derwent, and also obtained land that controlled the river, [17] including the Wyver area then being called Little Chevin. [18] The Strutts country house, Bridge Hill was built in 1793–1795 and obtained stone from a number of local places, including Scotches quarry and others in Wyver. [19] [20] The Strutts dammed the River Derwent to help channel water to power the mill, and to avoid overflow, the riverbank alongside Wyver was raised. [21] By the late 1820s, the family owned the vast majority of Wyver, except some land to the west and housing at the start of Wyver Lane. [22] A windmill was in place during the 1800s along the lane, it is thought it was used to pump water from springs in the vicinity to Belper for residents. [23] The North Midland Railway was built along the eastern edge of Wyver from 1838 and the line opened in 1840. [24]
Wyver Lane is a relatively modern period road, being formed as an easier route from Belper to Alderwasley Hall (the seat of the Hurt family with the Strutts having business and family ties) and eventually connecting to Whitewells Lane in Alderwasley parish. The original road to Wyver Farm branched off Belper Lane, and was later linked to this new route. [25] Wyver Lane as a private coach road was developed by the Strutt family (probably alongside Hurt and Arkwright), and followed the west bank of the river north of Belper. It is shown on an estate plan of 1828, and is labelled 'the old Bradley Road and Coach Road to Cromford; now changed'. It was labelled New Bradley Road in 1791 enclosure maps, [11] Lawn Farm Road [26] and by the turn of the 19th century was renamed Wyver Lane. Weir Lodge at the start of Wyver Lane may have functioned as a gatehouse, allowing access to the road. [27] This road was documented in texts of the time: 'A good road exists at present up the Vale of the Derwent, from Duffield to Belper-bridge, from whence it would be very important to the public that a good road should be made up the west side of the river to Cromford, nearly along the line of a private carriage-way, between these places, belonging to Messrs. Strutts, Charles Hurt, and Richard Arkwright'. [28] Later however, a more popular route was created in 1817 with the Belper to Matlock turnpike road to the east of the Derwent, the lane then going into some disuse. Wyver Lane itself also changed slightly over time, the route originally leading to Wyver Farm, but in the 20th century was the name of the road instead to Lawn Cottage.
This was explicitly mentioned in 1636 as a farm in Duchy of Lancaster records, although there are reports since the 14th century. [14] [29] The wider area was in the hands of numerous owners after 1791 enclosure activities, notable landowners including the Wards, Jodrells who were Lords of Belper manor, and the Hurt family of Alderwasley Hall, [26] it gave the Strutts an opportunity to assure their labour needs and welfare of their workforce, and they systematically began to buy numerous plots of land, obtaining Wyver Farm in 1809 and having full ownership by 1818. [30] It is unknown what state the farm was in by this time, although maps of the period indicate a more scattered farmstead with small buildings. [31] At some stage the farm was rebuilt, becoming one of their model farms utilising notable building techniques such as fireproof ceiling and floors which was already in use at their mills, structured storage of cattle feed to allow efficient delivery, allowing feed such as grains, cereals or hay to be tipped into pits or carted into stores that allows access to the mixing room in the first floor above the cow byres. Another Strutt farm feature are the cow byres being well-ventilated. The core portion of the farm is within an L-shaped grouping recessed into the hillside, while a western range holds a stable block with stone floor and feed storage areas. A further range of buildings comprised a stable, wagon lodge and barn which is also constructed of stone and has a slate roof. Other subsidiary buildings are a cow-house, hen houses, piggeries and small stable. [30] The produce would be used to supply the Strutt's workforce. [32]
The area in the far north east was known in antiquity as part of a parkland called Bradley Laund [33] with indications of being a farmstead since the 15th century. [34] An old route called Wyver Street Moor leading to a ford at the Derwent ran close by in medieval times. [25] Invariably, the farm was known under various titles as Highe Mill in 1681, [35] Milley Laund House, Millhay Lawn and Lawn Cottage by the late 19th century. [22] It was owned by the Ward family who were descended from the Bradleys, and there were relations to the Strutts. [36] In the late 18th century, changes done to the Derwent river to improve the Strutt's mills output including the riverbank being raised [21] adversely affected ground to the north of the weir used to retain water, Due to continual effects from the river to this property, the Wards litigated against the Strutt family for damages and a settlement involving an exchange was done whereby the land and farm was sold to the Strutts in 1810 for payment. [37] The land primarily associated to it was the floodplain east of Wyver Lane but some was pasture, a small channel in the area couldn't discharge into the river to help drain the area, so a pumping station was built. This drained the land and allowed farming to continue for some years. A portion of the land was also used as the Strutt's musket ry range. Lawn Cottage was not however classed as a model farm like Wyver Farm and was run as a traditional agricultural operation. The riverside floodplains was owned by the family until 1960, [21] when these were sold to the then Belper Urban District Council. The cottage was sold at a later stage due to legal ownership dispute. Ownership of both eventually came under the succeeding authority Amber Valley District Council. [5] [38] It was sold in 2012 to a housing co-operative community and refurbished.
The Strutt family organised a private militia in the late 18th century, the Belper Volunteer Battalion which protected the mills, in case of attacks from Luddites, and even invasion, in an era of Napoleon Bonaparte and regional instability. In 1800, a firing range was provided for them on Chevin Hill south of Wyver. [39] New rifle technology had made the range inadequate by the end of the 19th century, and the force by this time had been travelling to Derby each week, to use a more suitable range. In 1899, the Strutts decided that travelling to Derby was too inconvenient and offered to arrange for a larger range. The family provided the land south of Lawn Cottage which may have been in use previously for practice, and paid to have a local resident's cottage removed so that a target wall and formal range could be constructed. They also arranged facilities to allow the range to pass a government inspection including a munitions store, [40] which was completed by April 1899. The Wyver Lane range was enlarged several times up to 1948 and is one of the largest in England. It was used in the training of troops during the early stages of World War I (1914–18) and was still in use by the Territorial Army until the 1970s. [41] [42] The old firing range can still be seen at the bottom of the lane; several buttresses are still visible – one is the island on the left-hand side of the main pool, another is barely visible on the right-hand side of the main pool, and others have now almost disappeared. The furthest buttress (west of Wyver Lane but in Alderwasley parish) was angled to face southeast to achieve a 1000 yards position, which was the effective range of a military rifle by the end of the 19th century. Shorter distances were marked at 800, 600, 300, 200 and 100 yards. The rise of the land behind the main buttress helped to contain bullets, although Whitewells Lane would be closed during sessions. [41] To the left of the viewing mound is an old metal gatepost that was used by the Territorials: if there was a green flag on the gate it was safe to go through. If a red flag, then it wasn't. A little further down the lane is a bricked-up hut on the left-hand side, this is the former ammunition store. Because the reservists did not want water on the land they used to pump it into the river. The pumphouse is the brick building at the southern end of the reserve with the protruding pipe.
After the forces decommissioned the firing range, local authorities used it for landfill purposes from 1960 to 1982. The accumulations pushed water further up, creating bigger pools. As with most tips, it began to attract gulls, including visits from Iceland and glaucous gulls. The previous pumping of water from the land was stopped, which over time reverted the land to its wetland state which helped to diversify the bird population. Recognising the habitat and species within the area, the land was leased in 1990 by the district council and later landowners to a countywide interest group, the Derbyshire Wildlife Trust who now manage it as a local nature reserve also known as Wyver Lane Pool Reserve, becoming regarded as one of Derbyshire’s most important wetland locations and one of the few remaining areas of wet grassland in the Derwent valley. [6] The reserve occupies 19 acres (7.7 ha; 0.030 sq mi; 0.077 km2) and comprises two pools surrounded by water meadows and reed beds. [6] Local bird observers still sometimes pump out water into the river to keep the pools low to attract waders. Levels are now controlled by a sluice at the southern end of the main pool. There is also a pipe from the main pool to the river which is stopped up during winter to maintain the water levels for wintering wildfowl. In spring it is opened up; if there is a dry summer it should be low enough to attract waders in late summer or autumn.
To ensure that the many bird species continue to thrive there, there is no access onto the reserve, but there is a bird hide and viewing mound along Wyver Lane to enable observations. [6] The many resident types of birds include tufted ducks, Canada geese and grebes, while in spring waders such as curlew and common sandpiper during migration pass through, and lapwings breed at this time. In summer there are swallows, house martins, and swifts, while nearby coppices provide an environment for firecrests, pied flycatchers, spotted flycatchers, crossbills, stonechats, and hawfinch es. In winter, large flocks of black-headed, common, herring, lesser, and great black-backed gulls arrive from northern breeding grounds joined by ducks and other waterfowl including wigeon, goosanders, mallards, teal, and oystercatchers to roost and feed. Rarely seen birds such as water rails, jack snipes and bitterns have been spotted throughout the reedbeds. [43]
The feature is to the south of the nature reserve and accessed via a private lane and car park, covering 2 acres (0.81 ha). [7] It was owned by the Strutts in the 19th century and shown on various maps of the period including estate plans. Fishing rights for this and stretches of the Derwent were leased to the Belper and District Angling Society, who were first established in 1892. [44] The pond was sold on to the group in the late 1970s. [45]
In 2001 the Derwent Valley Mills World Heritage Site was ratified by UNESCO, an agency of the United Nations, to internationally recognise the contributions of the cotton mills area between Cromford and Derby to the Industrial Revolution. The Wyver rural area along with Wyver Farm, Lawn Cottage, Wyver Nature Reserve and listed buildings at the start of Wyver Lane were included, in acknowledgement of their part to the Strutt Mill complex and their industry. A single field north of Lawn Cottage was placed outside the designated site, but lies within a surrounding heritage buffer zone. [30] The overall site is overseen by a body, the Derwent Valley Trust. [46]
The Heritage Way is a long-distance footpath designated by the Derwent Valley Trust and running through much of the World Heritage site. The Cycleway is a long-distance route for cycling currently being proposed by the trust. At Wyver, the way is overlain onto Wyver Lane, which then branches off through fields to Whitewells Lane in Alderwasley parish. [47] [48] In 2020, the trust resurfaced the first section of Wyver Lane, creating a local cycleway segment. [49]
An archery club is based in woods which are in Alderwasley parish, and accessed by means of Wyver Lane. [50]
At Wyver Farm there are a number of listed buildings. Features include the main farmhouse, barns and outhouses. [51]
A terrace of three stone houses and other standalone residences exist at the start of Wyver Lane in the Scotches area. [52] [53]
Derwent Valley Mills is a World Heritage Site along the River Derwent in Derbyshire, England, designated in December 2001. It is administered by the Derwent Valley Mills Partnership. The modern factory, or 'mill', system was born here in the 18th century to accommodate the new technology for spinning cotton developed by Richard Arkwright. With advancements in technology, it became possible to produce cotton continuously. The system was adopted throughout the valley, and later spread so that by 1788 there were over 200 Arkwright-type mills in Britain. Arkwright's inventions and system of organising labour was exported to Europe and the United States.
The Derwent is a river in Derbyshire, England. It is 50 miles (80 km) long and is a tributary of the River Trent, which it joins south of Derby. Throughout its course, the river mostly flows through the Peak District and its foothills.
Amber Valley is a local government district with borough status in the east of Derbyshire, England, taking its name from the River Amber. Its council is based in Ripley. The district covers a semi-rural area lying to the north of the city of Derby. The district contains four main towns whose economy was based on coal mining and remains to some extent influenced by engineering, distribution and manufacturing, holding for instance the headquarters and production site of Thorntons confectionery.
Belper is a town and civil parish in the local government district of Amber Valley in Derbyshire, England, located about 7 miles (11 km) north of Derby on the River Derwent. Along with Belper, the parish includes the village of Milford and the hamlets of Bargate, Blackbrook, and Makeney.
Whatstandwell is a village on the River Derwent in the Amber Valley district of Derbyshire, England. It is about five miles south of Matlock and about four miles north of Belper. Whatstandwell railway station is on the Derby–Matlock Derwent Valley Line, and the A6 trunk road crosses the River Derwent in the village. Most of the population is included in the civil parish of Crich but the village may be said to extend across the Derwent into the parish of Alderwasley.
Duffield is a village in the Amber Valley district of Derbyshire, 5 miles (8.0 km) north of Derby. It is centred on the western bank of the River Derwent at the mouth of the River Ecclesbourne. It is within the Derwent Valley Mills World Heritage Area and the southern foothills of the Pennines.
Jedediah Strutt or Jedidiah Strutt – as he spelled it – was a hosier and cotton spinner from Belper, England.
Findern is a village and civil parish in the District of South Derbyshire, approximately 5–6 miles (9.7 km) south of Derby. The population of the civil parish was 1,669 at the 2011 Census.
Milford Tunnel is a double-track railway tunnel on the Midland Main Line in Derbyshire which runs under a hill called the Chevin between Duffield and Belper. It was built in 1840 by the Stephensons for the North Midland Railway. At 856 yards (783 m) long, Milford Tunnel was the second-longest tunnel on the North Midland Railway when it was built.
Ambergate is a village in Derbyshire, England, situated where the River Amber joins the River Derwent. It is about 6 miles (9.7 km) south of Matlock.
Milford is a village in the civil parish of Belper, in the Amber Valley district, in the county of Derbyshire, England. It is on the River Derwent, between Duffield and Belper on the A6 trunk road.
Duffield Frith was, in medieval times, an area of Derbyshire in England, part of that bestowed upon Henry de Ferrers by King William, controlled from his seat at Duffield Castle. From 1266 it became part of the Duchy of Lancaster and from 1285 it was a Royal Forest with its own Forest Courts.
Draycott and Church Wilne is a civil parish within the Borough of Erewash, which is in the county of Derbyshire, England. Partially built up and otherwise rural, its population was 3,090 residents in the 2011 census. The parish is 100 miles (160 km) north west of London, 5+1⁄2 miles (8.9 km) south east of the county city of Derby, and 3 miles (4.8 km) west of the nearest market town of Long Eaton. It shares a boundary with the parishes of Breaston, Elvaston, Hopwell, Ockbrook and Borrowash, Risley and Shardlow and Great Wilne.
Newton is a village in the civil parish of Blackwell, in the Bolsover district of Derbyshire, England, about a mile south of Tibshelf.
Shottle and Postern is a civil parish within the Amber Valley district, which is in the county of Derbyshire, England. Sparsely built up with much rural expanse, its population was 270 residents in the 2021 census. The parish is 120 miles (190 km) north west of London, 9 miles (14 km) north west of the county town of Derby, and 2+3⁄4 miles (4.4 km) equidistant of the nearest market towns of Belper and Wirksworth. It shares a boundary with the parishes of Alderwasley, Ashleyhay, Belper, Hazelwood, Idridgehay and Alton, Turnditch and Windley.
The Derwent Valley Heritage Way (DVHW) is a 55 miles (89 km) waymarked footpath along the Derwent Valley through the Peak District. The walk starts from Ladybower Reservoir in the Peak District National Park via Chatsworth, the scenery around the Derbyshire Dales, and through the Derwent Valley Mills World Heritage Site. It follows the Riverside Path through Derby and continues onwards to the historic inland port of Shardlow. Journey's end is at Derwent Mouth where the River Derwent flows into the River Trent.
The River Ecclesbourne is a small river in Derbyshire, England, which starts in the upper part of the town of Wirksworth, flows for 9 miles to Duffield, and then enters the River Derwent just outside the village.
Belper is a civil parish in the Amber Valley district of Derbyshire, England. The parish contains over 250 listed buildings that are recorded in the National Heritage List for England. Of these, one is listed at Grade I, the highest of the three grades, 15 are at Grade II*, the middle grade, and the others are at Grade II, the lowest grade. The parish contains the town of Belper, the village of Milford, smaller settlements, including Makeney and Bargate, and the surrounding countryside. Industry has been a major feature in the town, initially with nail making, and some workshops have survived and are listed. Major industry arrived towards the end of the 18th century when Jedediah Strutt and Richard Arkwright built a textile mill in the town. Later, Arkwright moved away, and more mills were built by Strutt, and later by his sons. North Mill was built in 1804 by William Strutt, it was one of the first iron-framed and fireproof mills to be built, and is listed at Grade I. The Strutt family built housing for their workers in Belper and Milford, usually in the form of long terraces, many of which have survived and are listed. The family also built farms to produce food for the community, including Crossroads Farm, Dalley Farm, Wyver Farm, and Moscow Farm; the farmhouses and associated farm buildings are listed.
The River Gardens is a public park in Belper, in Derbyshire, England. Its history dates back to 1905, and it is listed Grade II* in Historic England's Register of Parks and Gardens. It has won a Green Flag Award. The park is owned and managed by Amber Valley Borough Council.