Yamaha FJ

Last updated
Yamaha FJ1200
FJ1200 kalina.jpg
Yamaha FJ1200, 3XW model
Manufacturer Yamaha
Also calledFJ
Production1986-1996
PredecessorFJ1100
Successor FJR1300
Class Sport touring
Engine 1,188 cc air/oil-cooled in-line four-cylinder
Transmission 5-speed sequential manual transmission, chain-drive
Wheelbase 1,495 mm (58.9 in)
DimensionsL: 2,230 mm (88 in)
W: 775 mm (30.5 in)
Weight266 kg (586 lb) (wet)
Fuel capacity24 L (5.3 imp gal; 6.3 US gal)

The Yamaha FJ1100 and FJ1200 are sport touring motorcycles that were produced by Yamaha between 1984 and 1996.

Contents

FJ1100

Yamaha released the FJ1100 for model years 1984 and 1985. The FJ1100 was designed by GK Dynamics. This class is characterised by retaining sportiness while integrating more street-friendly riding characteristics, including good manoeuvrability as well as long-distance comfort, such as a more upright seating configuration designed to reduce back strain and a large fairing to reduce fatigue from wind resistance. Emphasis is placed on a balance of utility and sport, rather than pure performance orientation. The machine was noticeably narrower than many contemporaries, Yamaha achieved this by placing the alternator behind the cylinders instead of the more normal position on the end of the crankshaft. [1]

1984 FJ1100 with custom made seat Yamaha FJ1100.jpg
1984 FJ1100 with custom made seat

FJ1200

In 1986 Yamaha upgraded the FJ1100 by increasing the engine displacement slightly and adding upgraded suspension and other components. The result was the FJ1200. They also changed the colour choices with the next model, but they weren't significant. The peak power output was raised slightly to 130 bhp (97 kW) from the FJ1100s 125 bhp (93 kW),[ citation needed ] the FJ1200 had more low- to mid-range torque. The FJ1200 was produced in three main successive versions (1TX, 3CV and 3XW) each updated version benefiting from improvements to bodywork, front and rear suspension components, and the addition of an optional ABS-equipped version (FJ1200A) from 1991 until 1996 when Yamaha discontinued the FJ1200 in the United Kingdom. The model was discontinued in the United States in 1993. Market competitors during its production years included the BMW K100RS, Suzuki's 1100 Katana, and Kawasaki's Ninja ZX-10. [1]

Engine

The FJ1200 uses a four cylinder in-line layout and is air-cooled. Sixteen valves are operated by a chain-driven double overhead camshaft; valve clearances are adjusted using shims. The four constant-velocity carburettors are mounted in a bank behind the cylinders and feed each cylinder through a short intake manifolds. Four exhaust downpipes join a box below the engine where the gases are split to exit through two silencers (mufflers). The crankshaft is geared directly to the clutch, no counter balancer shaft is used. Starting is by electric starter only. Lubrication is wet sump using a trochoid pump; an oil radiator assists with cooling. [2] Both the FJ1100 and FJ1200 were fitted with an additional fuel vapour recovery system to comply with California emission regulations. [3]

1990 FJ1200 Model 3CV with standard windscreen FJ1200 3CV.jpg
1990 FJ1200 Model 3CV with standard windscreen

Transmission

The FJ1200 uses a five-speed constant-mesh sequential manual close-ratio gearbox. The clutch is of the wet, multiple-disc diaphragm spring type and is hydraulically operated. Final drive is by O-ring chain and sprockets.

Chassis

The frame of the FJ1200 is manufactured from mild steel box-section and uses a perimeter layout, the fairing and upper rear section use separate cylindrical tubing sub-frames. The rear shock absorber is placed vertically behind the engine and connects to a swinging arm made from extruded aluminium alloy (note: later 3XW models have mild steel swinging arm) via several forged aluminium rocker arms. The 17-inch front wheel is held between 41 mm spring and oil damped forks. The FJ1100 and early FJ1200 models featured adjustable anti-dive units and a smaller diameter 16-inch wheel. The FJ1100 and early FJ1200 used twin ventilated disc brakes for the front wheel with a single ventilated disc at the rear. FJ1200 models, 3CV & 3XW, used solid front discs but retained the rear ventilated disc, front brake calipers were upgraded to a four-piston design. An anti-lock braking system was used on the FJ1200A. A full fairing protects the rider, varying height fixed windscreens were available as options. [4]

FJ1200 with ABS brakes Yamaha.fj1200.bristol.750pix.jpg
FJ1200 with ABS brakes

Electrical system

The FJ1200 features a standard 12  volt electrical system. The alternator and starter motor is mounted behind the cylinders. Nippondenso Transistor Controlled Ignition (TCI) is used in conjunction with two coils. Yamaha's self-cancelling indicator unit is used and a variable resistance gauging system is used to monitor engine oil contents with associated warning lights. A large fuel gauge is provided as is a low fuel level warning light. A digital clock is also fitted. A safety feature of the FJ1200 is that the engine ignition is cut if the first gear is selected with the side-stand down, this is now commonplace on modern motorcycles. [5]

Specifications

FJ1100FJ1200
Engine1,097 cc (67 cu in), 4-stroke, four-cylinder, air-cooled, in-line1,188 cc (72.5 cu in), 4-stroke, four-cylinder, air-cooled, in-line
Bore Stroke74.0 mm × 63.8 mm (2.91 in × 2.51 in)77.0 mm × 63.8 mm (3.03 in × 2.51 in)
Compression Ratio9.5:19.7:1
Fuel SystemMikuni BS36 36 mm carburettor x 4Mikuni BS36 36 mm carburettor x 4
Fuel Tank Capacity24.5 L (5.4 imp gal; 6.5 US gal)24 L (5.3 imp gal; 6.3 US gal)
LubricationWet sump
IgnitionTCI (Analogue)TCI (Analogue) 19861987 / TCI (Digital) 19881996
Transmission5-speed constant-mesh sequential manual
Final Drive chain-drive
Overall Length2,230 mm (87.8 in)2,235 mm (88.0 in)
Overall Width730 mm (28.7 in)775 mm (30.5 in)
Overall Height1,230 mm (48.4 in)1,245 mm (49.0 in)
Seat Height780 mm (30.7 in)790 mm (31.1 in)
Ground Clearance140 mm (5.5 in)
Wheelbase1,490 mm (58.7 in)1,495 mm (58.9 in)
Weight incl. oil, full fuel tank, etc.252 kg (556 lb)266 kg (586 lb)
Suspension FrontTelescopic, coil spring, adjustable spring preload, brake linked anti-dive systemTelescopic, coil spring, adjustable spring preload, adjustable rebound damping
Suspension RearLink-type, gas/oil damped,Link-type, gas/oil damped, 8-way adjustable spring preload, 12-way adjustable rebound damping
Brakes FrontDual hydraulic disc
Brakes RearSingle hydraulic disc
Tires Front120/80-VR16 (through 1987) 120/70-VR17 (1988 on)
Tires Rear150/80-VR16

See also

Related Research Articles

The Kawasaki KLR650 is a 652 cc (39.8 cu in) dual-sport motorcycle intended for both on-road and off-road riding. It was a long-standing model in Kawasaki's lineup, having been introduced in 1987 to replace the 564 cc (34.4 cu in) 1984–1986 Kawasaki KLR600, and remaining almost unchanged through the 2007 model. The 2008 model was the first significant redesign of the KLR650 since its inception. It was built with a 652 cc four-stroke, DOHC, dual-counterbalanced, single-cylinder, water-cooled engine. The second significant redesign in 2022 added new features such as electronic fuel injection and an anti-lock braking system.

<span class="mw-page-title-main">Yamaha RD350</span> Type of motorcycle

The RD350 is a two-stroke motorcycle produced by Yamaha from 1973 to 1975. It evolved directly from the piston port, front drum-braked, five-speed Yamaha 350 cc "R5".

<span class="mw-page-title-main">Honda CX series</span> Series of motorcycles

The Honda CX series motorcycles, including the GL500 and GL650 Silver Wing variants, were developed and released by Honda in the late 1970s, with production ending in most markets by the mid 1980s. The design included innovative features and technologies that were uncommon or unused at the time such as liquid cooling, electric-only starting, low-maintenance shaft drive, modular wheels, and dual CV-type carburetors that were tuned for reduced emissions. The electronic ignition system was separate from the rest of the electrical system, but the motorcycle could only be started via the start button.

<span class="mw-page-title-main">BSA Bantam</span> Type of motorcycle

The BSA Bantam is a two-stroke unit construction motorcycle that was produced by the Birmingham Small Arms Company (BSA) from 1948 until 1971. Exact production figures are unknown, but it was between 350,000 and 500,000.

<span class="mw-page-title-main">Yamaha XS 650</span> Yamaha motorcycle

The Yamaha XS650 is a mid-size motorcycle that was made by the Yamaha Motor Company. The standard model was introduced in October 1969, and produced until 1979. The "Special" cruiser model was introduced in 1978 and produced until 1985. The XS650 began with the 1955 Hosk SOHC 500 twin. After about 10 years of producing 500 twin, Hosk engineers designed a 650 cc twin. Later Showa Corporation acquired the Hosk company, and in 1960 Yamaha acquired Showa, with Hosk's early design of 650 cc twin.

<span class="mw-page-title-main">Ducati L-twin engine</span>

The L-twin is a naturally aspirated two-cylinder petrol engine by Ducati. It uses a 90-degree layout and 270-degree firing order and is mounted with one cylinder nearly horizontal.

<span class="mw-page-title-main">Yamaha SR400 & SR500</span> Type of motorcycle

The Yamaha SR400 (1978–2021) and SR500 (1978–1999) are single-cylinder, air-cooled, two-passenger motorcycles manufactured in Japan by Yamaha Motor Company as a street version of the Yamaha XT500, with a standard riding posture and styling resembling the Universal Japanese Motorcycles of the 1970s. The two models differ by their engines: the SR400 engine has a lower displacement, achieved with a different crankshaft and shorter piston stroke and both models feature only kickstarting, i.e., no electric starter.

<span class="mw-page-title-main">Yamaha RD500LC</span> Type of motorcycle

The Yamaha RD500LC is a high-performance, two-stroke sports motorcycle, also known as the RZ500 in Canada and Australia. A lightened but detuned version known as the RZV500R was developed for the Japanese home market. Strict United States Environmental Protection Agency regulations meant that the RZ500 was not available for sale in that country. Produced for a short period between 1984 and 1986 it has become a sought after collector's machine.

<span class="mw-page-title-main">Yamaha RX 100</span> Type of motorcycle

The Yamaha RX 100 was a two-stroke motorcycle made by Yamaha from 1985 to 1996 with technical collaboration and distributed in India by the Escorts Group. At the initial stage, Yamaha Japan was exporting all bikes from Japan to India. After 1990, Escorts started production in India, with some parts being imported from Japan.

<span class="mw-page-title-main">Yamaha FZ750</span> Japanese motorcycle produced 1985 to 1991

The Yamaha FZ750 is a sports motorcycle produced by Yamaha Motor Corporation between 1985 and 1991. The FZ750 is notable for several reasons, perhaps the most radical being the 5-valve cylinder head with a radial arrangement. This became something of a Yamaha trademark. The FZ750 would be the first bike in the Genesis design concept.

<span class="mw-page-title-main">Yamaha DT125</span> Motorcycle first released 1974

The Yamaha DT125 is a motorcycle produced by Yamaha Motor Company that was first launched in 1974 as the DT125A and is still sold in some markets to this day. The model designation DT indicates that it is a two-stroke, off-road-styled motorcycle, it has a raised exhaust, handlebars with cross members, universal tires, and adequate ground clearance for an off-road enduro motorcycle or trail motorcycle. The USA received the last DT125H in 1981.

<span class="mw-page-title-main">Yamaha TX500</span> Type of motorcycle

The Yamaha TX500 is a two-cylinder standard motorcycle built by Yamaha and sold in 1973 and 1974. Early models closely resembled the Triumph Bonneville in style. In 1975 the bike was renamed XS500 and then continued to be updated until 1978 when sales ended in the USA. In Europe, the model was available through 1980.

<span class="mw-page-title-main">Triumph Bonneville T140</span> Motorcycle

The Triumph Bonneville T140 is a standard motorcycle with a 750 cc (46 cu in) capacity engine that was designed and built by Triumph Engineering at Meriden near Coventry.

<span class="mw-page-title-main">Yamaha XJ650 Maxim</span> Type of motorcycle

The Yamaha XJ650 Maxim is a mid-size motorcycle by the Yamaha Motor Company introduced in 1980 as the Maxim I and produced through 1983. Yamaha designed the high-performance XJ650 as a brand-new four-cylinder with shaft drive, and built it specifically as a special cruiser. The XJ Maxim was the successor of the XS Special introduced in 1978.

<span class="mw-page-title-main">Honda CBX550F</span> Type of motorcycle

The Honda CBX550F is a four-stroke, in line four cylinder, sport tourer motorcycle produced from 1982 to 1986 by the Honda Motor Company. The CBX550F II is identical apart from the addition of a half-fairing.

<span class="mw-page-title-main">BMW G450X</span> Type of motorcycle

The G450X is an Enduro-class motorcycle that was produced by BMW Motorrad between 2008 and 2011.

<span class="mw-page-title-main">Suzuki T10</span> Two-stroke, twin-cylinder motorcycle

The Suzuki T10 is a 246 cc (15.0 cu in), two-stroke, twin-cylinder motorcycle produced by the Japanese Suzuki company between 1962 and 1967. The model was based on the earlier Colleda TT and had an improved frame. It was marketed as the El Camino in the US and was Suzuki's first twin to be sold in America.

<span class="mw-page-title-main">Suzuki GT250</span> Two-stroke, twin-cylinder motorcycle

The Suzuki GT250, also known as the Suzuki Hustler in the US is a 247 cc (15.1 cu in), two-stroke, twin-cylinder motorcycle produced by the Japanese Suzuki company between 1971 and 1981. The model was developed from the earlier T250, and was one of the best selling motorcycles in its class. For 1978 the bike was redesign and marketed as the GT250 X7. The X7 was capable of reaching 100 mph (160 km/h) in favourable conditions. The model range was discontinued in 1981 in favour of Suzuki's four stroke models, and the X7 was developed into the RG250 Gamma.

<span class="mw-page-title-main">Ducati Forza</span> SOHC motorcycle made by MotoTrans under licence from Ducati

The Ducati Forza is a 340 cc (21 cu in) single cylinder bevel drive SOHC motorcycle produced by the Spanish manufacturer MotoTrans, who were licensed by Ducati to produce motorcycles under the Ducati brand name and was produced from 1976 to 1983. The model is based on the 350 'wide case' Ducati singles which the Italian Ducati factory had stopped manufacturing in 1974, but which MotoTrans continued to develop and produce.

<span class="mw-page-title-main">Laverda 1000</span> Italian 1,000 cc DOHC triple motorcycle

The Laverda 1000 is a series of 981 cc (59.9 cu in) air cooled DOHC triple motorcycles produced by the Italian manufacturer Laverda between 1973 and 1988. The high-performance variant, the Jota, was the fastest production motorcycle from 1976 to 1981. Approximately 7,100 triples of the various models were produced.

References

Notes

  1. 1 2 Haynes 0.5
  2. Haynes 2.4
  3. Clymer p.216
  4. Haynes 5.2
  5. Haynes 2.5

Bibliography

  • Ahlstrand, Alan and Haynes, John H. Yamaha FJ1100 & 1200 Fours '84 to '96. Sparkford, UK: Haynes Publishing, 1996. ISBN   1-85960-229-0.
  • Clymer, Yamaha FJ1100 & FJ1200 1984-1993. Overland Park, Kansas. Intertec Publishing, second edition 1996. ISBN   0-89287-605-0.
  • Brown, Roland The Ultimate History of Fast Bikes. Bath, UK: Parragon Books, 2004. ISBN   1-4054-3732-4.