Yamaha RD500LC

Last updated
Yamaha RD500LC
RD500.jpg
Manufacturer Yamaha
Also calledRZ500
RZV500R
Production1984 - 1986
Class Sports
Engine 499 cc liquid-cooled V4 two stroke
Power 64.2 kW (88 hp) @ 9,500 rpm
Torque 65.4 N·m @ 8,500 rpm
Transmission 6 speed
Weight205 kg (452 lb) (dry)
Related Yamaha RD350LC (YPVS)

The Yamaha RD500LC is a high-performance, two-stroke sports motorcycle, also known as the RZ500 in Canada and Australia. A lightened but detuned version known as the RZV500R was developed for the Japanese home market. Strict United States Environmental Protection Agency regulations meant that the RZ500 was not available for sale in that country. Produced for a short period between 1984 and 1986 it has become a sought after collector's machine. [1]

Contents

Development

With the success in the early 1980s of Kenny Roberts and the Yamaha YZR500 in Grand Prix motorcycle racing Yamaha realised that a road going replica of their 500 cc racing machine would sell well. Using the similar technology of the smaller RD series of two-stroke motorcycles the RD500LC was launched in 1984.

Design

Engine

Yamaha YZR500. Wr12.jpg
Yamaha YZR500.

The RD500LC (Race Developed 500CC Liquid Cooled motorcycle) uses a 50-degree, twin-crankshaft V4 engine layout. Linked Yamaha YPVS exhaust power valves are controlled by a single electronic unit and servo motor and are designed to give a broader power band. The engine also features intake reed valves unlike the YZR500 racer which used rotary disc valve induction. The reed valves use two different intake arrangements, the lower cylinders are fed through crankcase mounted reeds; the upper pair use cylinder barrel mounted reeds. The four Mikuni carburettors are side mounted in pairs and feed each cylinder through 90 degree intake manifold. The lower expansion chambers exit normally but the upper pipes cross over each other just behind the exhaust ports to maintain the correct tuned length.

The dual crankshafts are geared directly to the clutch, while the front crankshaft also drives a counter balancer shaft mounted between the two crankshafts. The counterbalance shaft, unusual on a two-stroke, assists with damping engine vibrations. The engine is cooled by thermostatically controlled liquid cooling, an auxiliary electric fan mounted behind the radiator cuts in at quite high but acceptable working temperatures (e.g. when stationary in traffic). Lubrication is by direct injection into the inlet manifolds using Yamaha's 'Autolube' pump system. Normally controlled in other two-stroke engines by throttle position, the engine oil pump is controlled by the YPVS servo motor ensuring that the oil supply is not shut off at high engine revolutions. [1] [2]

Transmission

RD500LC rear view RD500rear.JPG
RD500LC rear view

The RD500LC uses a six-speed sequential close ratio gearbox with the usual road-going 'one down and five up' sequence, the gear shafts are removable from the right side of the engine without the need to split the crankcases. The clutch is of the wet, multiple-disc coil spring type and is cable operated. Unusually for a two-stroke engine the gears and outer crankshaft bearings are lubricated by a separate crankshaft driven trochoid oil pump. Final drive is by conventional for the time O-ring chain and sprockets.

Chassis

The frame of the RD500LC is manufactured from mild steel box-section and uses a perimeter layout. The rear shock absorber is unusually placed horizontally under the engine and uses the lower crankcase as a mounting point. The under-seat area is occupied by the upper cylinder exhaust chambers, the oil pump and one-way valves, the battery and the YPVS (Yamaha Power Valve System) servo motor. The battery is of the 'wet' lead acid type and a cut-out is provided in the right side panel to view the acid levels without having to dismantle half the bike! The rear of the shock absorber connects to an extruded aluminium alloy swinging arm via several forged aluminium rocker arms. An unusually small diameter 16-inch wheel is held between 37 mm (1.5 in) spring and oil damped forks which featured adjustable anti-dive units.

The RD500LC uses twin ventilated disc brakes for the front wheel with a single ventilated disc at the rear. A solo seat cowl was originally provided to cover the pillion seat when not in use. [1] The Japanese market RZV500R differs from the RD500 by not having a rear-mounted pillion grab handle fitted (which gives a cleaner, more race-oriented look to the motorcycle).

Electrical system

RD500LC Speedometer and Tachometer Yamaha RD500LC instruments.JPG
RD500LC Speedometer and Tachometer

The RD500LC features a standard 12-volt electrical system. Yamaha's self-cancelling indicator unit is used and a variable resistance gauging system is used to monitor two-stroke oil tank contents with associated warning lights. Nippondenso capacitor discharge ignition (CDI) is used in conjunction with two coils. [3]

RZV500R

The RZV500R was designed exclusively for the Japanese home market although many have been exported privately. The RZV500R features upgraded parts not found on the standard RD500LC and RZ500. A major difference is the hand-welded aluminium frame, which is significantly lighter than the steel version used on standard models. The water temperature gauge also doubles as a fuel tank contents gauge at the push of a RHS lever (very useful feature given their fuel consumption) and the front-fork preload can be altered from the top of the forks. There is also a red light mounted within the tachometer housing that comes on at the equivalent of 55 mph (Japanese maximum national speed limit). The speedo is calibrated in km/h.

The front forks are air assisted with rebound damping adjustment. The rear brake and gear levers are cast from aluminium, as are the clip-on type handle bars. These chassis modifications added up to a weight saving of 20 lb (9.1 kg). The engine was detuned to 64 hp (48 kW) to comply with Japanese legislation. This was achieved by restricting the internal diameter of the exhaust pipes and changes to the carburettor jetting. [1] These restrictions are easily changed to the RD500 specification by opening up the restrictor plates in the exhaust to create the same diameter hole as the exhaust pipes had as standard and the re-jetting of the carburetors to suit.

Models by country

Differences mentioned are comparisons to the UK specification RD500LC, Yamaha model numbers are in brackets where known.

RZ500N (53G)
Front and rear yellow side reflectors
RZ500S (1VW)
Self-retracting sidestand, right dip headlight
Self-retracting side stand, extended rear mudguard, right dip headlight
Reduced load capacity (205kg instead of 211kg), self-cancelling indicators deleted, right dip headlight
RZV500R (51X)
Tachometer mounted red warning light that activates at the equivalent of 55mph. Hand-produced lightweight aluminium frame, fuel tank contents gauge activated by a rhs mounted function switch (uses water temp gauge to show fuel tank contents available), front suspension pre-load adjustable from dial on top of forks legs. Self-cancelling indicators deleted. Production run limited to 1600 units only (all sold in the first week of release allegedly)
Self-retracting sidestand, suppressor spark plug caps, right dip headlight
Modified exhaust pipes, self-retracting sidestand, right dip headlight
RD500LC (47X early models - 1GE late models)

Specifications (RD500LC/RZV500R)

RD500LC [1] [3] RZV500R [1] [3]
Engine499 cc (30 cu in), 2-stroke, four-cylinder, liquid-cooled, reed valve induction with YPVS
Bore Stroke56.4 mm × 50.0 mm (2.22 in × 1.97 in)
Compression Ratio6.6:1
Fuel SystemMikuni VM26SS 26 mm (1.0 in) carburettor x 4
LubricationYamaha Autolube two stroke injection, transmission gear pump.
IgnitionCapacitor Discharge Ignition (CDI)
Transmission6-speed, constant mesh
Final Drive530 chain, 102 links
Overall Length2,085 mm (82.1 in)
Overall Width705 mm (27.8 in)
Overall Height1,145 mm (45.1 in)
Seat Height780 mm (30.7 in)
Ground Clearance145 mm (5.7 in)
Wheelbase1,375 mm (54.1 in)
Dry Weight205 kg (452 lb)196 kg (432 lb)
Suspension FrontTelescopic, coil spring, non adjustable spring preload, brake linked anti-dive systemTelescopic, air assisted coil spring, adjustable spring preload, adjustable rebound damping with brake linked anti-dive system
Suspension RearLink-type, gas/oil damped, 5-way adjustable spring preload, 4-way adjustable rebound damping
Brakes FrontDual hydraulic disc
Brakes RearSingle hydraulic disc
Tires Front120/80-VR16
Tires Rear130/80-VR18
Fuel Tank Capacity22 L (6 US gal; 5 imp gal)

Motorsport

The bike won the Castrol Six Hour race in 1984.

See also

Related Research Articles

<span class="mw-page-title-main">Two-stroke engine</span> Internal combustion engine type

A two-strokeengine is a type of internal combustion engine that completes a power cycle with two strokes of the piston during one power cycle, this power cycle being completed in one revolution of the crankshaft. A four-stroke engine requires four strokes of the piston to complete a power cycle during two crankshaft revolutions. In a two-stroke engine, the end of the combustion stroke and the beginning of the compression stroke happen simultaneously, with the intake and exhaust functions occurring at the same time.

Yamaha Motor Co., Ltd. is a Japanese multinational manufacturer of motorcycles, marine products such as boats and outboard motors, and other motorized products. The company was established in 1955 upon separation from Yamaha Corporation, and is headquartered in Iwata, Shizuoka, Japan. The company conducts development, production and marketing operations through 109 consolidated subsidiaries as of 2012.

<span class="mw-page-title-main">Honda CX series</span> Series of motorcycles

The Honda CX series motorcycles, including the GL500 and GL650 Silver Wing variants, were developed and released by Honda in the late 1970s, with production ending in most markets by the mid 1980s. The design included innovative features and technologies that were uncommon or unused at the time such as liquid cooling, electric-only starting, low-maintenance shaft drive, modular wheels, and dual CV-type carburetors that were tuned for reduced emissions. The electronic ignition system was separate from the rest of the electrical system, but the motorcycle could only be started via the start button.

<span class="mw-page-title-main">Yamaha XS 650</span> Yamaha motorcycle

The Yamaha XS650 is a mid-size motorcycle made by Yamaha Motor Company. The standard model was introduced in October 1969,and produced through 1979. The "Special" cruiser model was introduced in 1978 and produced through 1985. The XS650 began with the 1955 Hosk SOHC 500 twin. After about 10 years of producing 500 twin, Hosk engineers designed a 650 cc twin. Later the Hosk company was acquired by Showa Corporation, and in 1960 Yamaha had bought Showa with Hosk's early design of 650 cc twin.

The two-stroke power valve system is an improvement to a conventional two-stroke engine that gives a high power output over a wider RPM range.

<span class="mw-page-title-main">Yamaha FJ</span> Type of motorcycle

The Yamaha FJ1100 and FJ1200 are sport touring motorcycles that were produced by Yamaha between 1984 and 1996.

<span class="mw-page-title-main">Motorcycle engine</span> Engine that powers a motorcycle

A motorcycle engine is an engine that powers a motorcycle. Motorcycle engines are typically two-stroke or four-stroke internal combustion engines, but other engine types, such as Wankels and electric motors, have been used.

<span class="mw-page-title-main">Yamaha RZ350</span> Type of motorcycle

The Yamaha RZ350 is a two-stroke motorcycle produced by Japanese motorcycle manufacturer Yamaha between 1983 and 1996. Available in the US from 1983-1985, Canada until 1990 and Brazil until 1996. The RZ was the final evolution of the popular and well-known series of RD Yamaha motorcycles, and as such is also known as the RD350LC II or RD350 YPVS.

<span class="mw-page-title-main">Suzuki GSX-R750</span> Sports motorcycle

The Suzuki GSX-R750 is a sports motorcycle made by Suzuki since 1985. It was introduced at the Cologne Motorcycle Show in October 1984 as a motorcycle of the GSX-R series.

<span class="mw-page-title-main">Yamaha Blaster</span> Type of motorcycle

The Yamaha Blaster is a compact all-terrain vehicle produced as an entry-level machine manufactured in Japan and sold in the United States from 1988 to 2006. Because of the Blaster's initial low price tag, it sold in large numbers for many years from its inception in 1988 all the way to present day. Enthusiasts are still buying and building Blasters that compete with modern day four-strokes. Its two-stroke engine is easily modified and a large aftermarket now exists for the quad. A range of add-ons are readily available from simple bolt on modifications and suspension parts to complete aftermarket frames and big bore kits to give more power to the engine.

<span class="mw-page-title-main">Yamaha FZR1000</span> Motorcycle model produced by Yamaha

The Yamaha FZR1000 is a motorcycle produced by Yamaha from 1987 to 1995. Classed as a sports motorcycle.

<span class="mw-page-title-main">Ducati L-twin engine</span>

The L-twin is a naturally aspirated two-cylinder petrol engine by Ducati. It uses a 90-degree layout and 180-degree firing order as is mounted with one cylinder horizontal.

<span class="mw-page-title-main">Yamaha SR400 & SR500</span> Type of motorcycle

The Yamaha SR400 (1978–2021) and SR500 (1978–1999) are single-cylinder, air-cooled, two-passenger motorcycles manufactured in Japan by Yamaha Motor Company as a street version of the Yamaha XT500, with a standard riding posture and styling resembling the Universal Japanese Motorcycles of the 1970s. The two models differ by their engines: the SR400 engine has a lower displacement, achieved with a different crankshaft and shorter piston stroke and both models feature only kickstarting, i.e., no electric starter.

<span class="mw-page-title-main">Yamaha FZ750</span> Japanese motorcycle produced 1985 to 1991

The Yamaha FZ750 is a sports motorcycle produced by Yamaha Motor Corporation between 1985 and 1991. The FZ750 is notable for several reasons, perhaps the most radical being the 5-valve cylinder head with a radial arrangement. This became something of a Yamaha trademark. The FZ750 would be the first bike in the Genesis design concept.

<span class="mw-page-title-main">Yamaha TX750</span> Two-cylinder standard motorcycle built by Yamaha

The TX750 is a two-cylinder standard motorcycle built by Yamaha. The bike was released in 1972. Significant reliability problems affected the engines in early bikes. Yamaha made several changes to solve the problems but the bike was withdrawn from most markets after 1974 and production stopped in the home market after 1975.

The Yamaha TZR125 is a two-stroke 125 cc (7.6 cu in) sports motorcycle made for the European and South East Asian markets which uses the YPVS. The TZR125 was produced from 1987 and spanned two generations until the late 1990s each with a number of variants and sub variants.

<span class="mw-page-title-main">Yamaha RD350LC</span> Type of motorcycle

The Yamaha RD350LC was a two-stroke motorcycle produced by Yamaha between 1980 and 1983.

<span class="mw-page-title-main">Kawasaki A1 Samurai</span> Type of motorcycle

The Kawasaki A1 Samurai is a 250 cc (15 cu in) standard class Kawasaki motorcycle which was sold from 1967 through 1971.

<span class="mw-page-title-main">Yamaha RD350 YPVS</span> Type of motorcycle

Yamaha RD350 YPVS is a motorcycle that Yamaha made from 1983 to 1986. It was launched at the Cologne motorcycle show as "the nearest thing to a road going racer ever produced".

<span class="mw-page-title-main">Yamaha TZ 250</span> Type of motorcycle

The Yamaha TZ 250 was a commercially available racing motorcycle with a watercooled, two-stroke, 250 cc engine produced by the Japanese manufacturer Yamaha.

References

Notes
  1. 1 2 3 4 5 6 Motorcycle.com
  2. Yamaha Service manual
  3. 1 2 3 Yamaha service manual
References