In mathematics, more particularly in the fields of dynamical systems and geometric topology, an Anosov map on a manifold M is a certain type of mapping, from M to itself, with rather clearly marked local directions of "expansion" and "contraction". Anosov systems are a special case of Axiom A systems.
Anosov diffeomorphisms were introduced by Dmitri Victorovich Anosov, who proved that their behaviour was in an appropriate sense generic (when they exist at all). [1]
Three closely related definitions must be distinguished:
A classical example of Anosov diffeomorphism is the Arnold's cat map.
Anosov proved that Anosov diffeomorphisms are structurally stable and form an open subset of mappings (flows) with the C1 topology.
Not every manifold admits an Anosov diffeomorphism; for example, there are no such diffeomorphisms on the sphere . The simplest examples of compact manifolds admitting them are the tori: they admit the so-called linear Anosov diffeomorphisms, which are isomorphisms having no eigenvalue of modulus 1. It was proved that any other Anosov diffeomorphism on a torus is topologically conjugate to one of this kind.
The problem of classifying manifolds that admit Anosov diffeomorphisms turned out to be very difficult, and still as of 2023 [update] has no answer for dimension over 3. The only known examples are infranilmanifolds, and it is conjectured that they are the only ones.
A sufficient condition for transitivity is that all points are nonwandering: .
Also, it is unknown if every volume-preserving Anosov diffeomorphism is ergodic. Anosov proved it under a assumption. It is also true for volume-preserving Anosov diffeomorphisms.
For transitive Anosov diffeomorphism there exists a unique SRB measure (the acronym stands for Sinai, Ruelle and Bowen) supported on such that its basin is of full volume, where
As an example, this section develops the case of the Anosov flow on the tangent bundle of a Riemann surface of negative curvature. This flow can be understood in terms of the flow on the tangent bundle of the Poincaré half-plane model of hyperbolic geometry. Riemann surfaces of negative curvature may be defined as Fuchsian models, that is, as the quotients of the upper half-plane and a Fuchsian group. For the following, let H be the upper half-plane; let Γ be a Fuchsian group; let M = H/Γ be a Riemann surface of negative curvature as the quotient of "M" by the action of the group Γ, and let be the tangent bundle of unit-length vectors on the manifold M, and let be the tangent bundle of unit-length vectors on H. Note that a bundle of unit-length vectors on a surface is the principal bundle of a complex line bundle.
One starts by noting that is isomorphic to the Lie group PSL(2,R). This group is the group of orientation-preserving isometries of the upper half-plane. The Lie algebra of PSL(2,R) is sl(2,R), and is represented by the matrices
which have the algebra
The exponential maps
define right-invariant flows on the manifold of , and likewise on . Defining and , these flows define vector fields on P and Q, whose vectors lie in TP and TQ. These are just the standard, ordinary Lie vector fields on the manifold of a Lie group, and the presentation above is a standard exposition of a Lie vector field.
The connection to the Anosov flow comes from the realization that is the geodesic flow on P and Q. Lie vector fields being (by definition) left invariant under the action of a group element, one has that these fields are left invariant under the specific elements of the geodesic flow. In other words, the spaces TP and TQ are split into three one-dimensional spaces, or subbundles, each of which are invariant under the geodesic flow. The final step is to notice that vector fields in one subbundle expand (and expand exponentially), those in another are unchanged, and those in a third shrink (and do so exponentially).
More precisely, the tangent bundle TQ may be written as the direct sum
or, at a point , the direct sum
corresponding to the Lie algebra generators Y, J and X, respectively, carried, by the left action of group element g, from the origin e to the point q. That is, one has and . These spaces are each subbundles, and are preserved (are invariant) under the action of the geodesic flow; that is, under the action of group elements .
To compare the lengths of vectors in at different points q, one needs a metric. Any inner product at extends to a left-invariant Riemannian metric on P, and thus to a Riemannian metric on Q. The length of a vector expands exponentially as exp(t) under the action of . The length of a vector shrinks exponentially as exp(-t) under the action of . Vectors in are unchanged. This may be seen by examining how the group elements commute. The geodesic flow is invariant,
but the other two shrink and expand:
and
where we recall that a tangent vector in is given by the derivative, with respect to t, of the curve , the setting .
When acting on the point of the upper half-plane, corresponds to a geodesic on the upper half plane, passing through the point . The action is the standard Möbius transformation action of SL(2,R) on the upper half-plane, so that
A general geodesic is given by
with a, b, c and d real, with . The curves and are called horocycles . Horocycles correspond to the motion of the normal vectors of a horosphere on the upper half-plane.
In mathematics, a Lie group is a group that is also a differentiable manifold. A manifold is a space that locally resembles Euclidean space, whereas groups define the abstract concept of a binary operation along with the additional properties it must have to be thought of as a "transformation" in the abstract sense, for instance multiplication and the taking of inverses (division), or equivalently, the concept of addition and the taking of inverses (subtraction). Combining these two ideas, one obtains a continuous group where multiplying points and their inverses are continuous. If the multiplication and taking of inverses are smooth (differentiable) as well, one obtains a Lie group.
In geometry, a geodesic is a curve representing in some sense the shortest path (arc) between two points in a surface, or more generally in a Riemannian manifold. The term also has meaning in any differentiable manifold with a connection. It is a generalization of the notion of a "straight line".
In differential geometry, a Riemannian manifold or Riemannian space(M, g), so called after the German mathematician Bernhard Riemann, is a real, smooth manifold M equipped with a positive-definite inner product gp on the tangent space TpM at each point p.
In Riemannian geometry, an exponential map is a map from a subset of a tangent space TpM of a Riemannian manifold M to M itself. The (pseudo) Riemannian metric determines a canonical affine connection, and the exponential map of the (pseudo) Riemannian manifold is given by the exponential map of this connection.
In mathematics, a foliation is an equivalence relation on an n-manifold, the equivalence classes being connected, injectively immersed submanifolds, all of the same dimension p, modeled on the decomposition of the real coordinate space Rn into the cosets x + Rp of the standardly embedded subspace Rp. The equivalence classes are called the leaves of the foliation. If the manifold and/or the submanifolds are required to have a piecewise-linear, differentiable, or analytic structure then one defines piecewise-linear, differentiable, or analytic foliations, respectively. In the most important case of differentiable foliation of class Cr it is usually understood that r ≥ 1. The number p is called the dimension of the foliation and q = n − p is called its codimension.
This is a glossary of some terms used in Riemannian geometry and metric geometry — it doesn't cover the terminology of differential topology.
This is a glossary of terms specific to differential geometry and differential topology. The following three glossaries are closely related:
In differential geometry, a G-structure on an n-manifold M, for a given structure group G, is a principal G-subbundle of the tangent frame bundle FM (or GL(M)) of M.
In mathematics, a flow formalizes the idea of the motion of particles in a fluid. Flows are ubiquitous in science, including engineering and physics. The notion of flow is basic to the study of ordinary differential equations. Informally, a flow may be viewed as a continuous motion of points over time. More formally, a flow is a group action of the real numbers on a set.
In mathematics, the vector flow refers to a set of closely related concepts of the flow determined by a vector field. These appear in a number of different contexts, including differential topology, Riemannian geometry and Lie group theory. These related concepts are explored in a spectrum of articles:
In dynamical systems theory, a subset Λ of a smooth manifold M is said to have a hyperbolic structure with respect to a smooth map f if its tangent bundle may be split into two invariant subbundles, one of which is contracting and the other is expanding under f, with respect to some Riemannian metric on M. An analogous definition applies to the case of flows.
In a field of mathematics known as differential geometry, the Courant bracket is a generalization of the Lie bracket from an operation on the tangent bundle to an operation on the direct sum of the tangent bundle and the vector bundle of p-forms.
In Riemannian geometry, the unit tangent bundle of a Riemannian manifold (M, g), denoted by T1M, UT(M) or simply UTM, is the unit sphere bundle for the tangent bundle T(M). It is a fiber bundle over M whose fiber at each point is the unit sphere in the tangent bundle:
In Riemannian geometry, the cut locus of a point in a manifold is roughly the set of all other points for which there are multiple minimizing geodesics connecting them from , but it may contain additional points where the minimizing geodesic is unique, under certain circumstances. The distance function from p is a smooth function except at the point p itself and the cut locus.
In mathematics, the differential geometry of surfaces deals with the differential geometry of smooth surfaces with various additional structures, most often, a Riemannian metric. Surfaces have been extensively studied from various perspectives: extrinsically, relating to their embedding in Euclidean space and intrinsically, reflecting their properties determined solely by the distance within the surface as measured along curves on the surface. One of the fundamental concepts investigated is the Gaussian curvature, first studied in depth by Carl Friedrich Gauss, who showed that curvature was an intrinsic property of a surface, independent of its isometric embedding in Euclidean space.
In mathematics, the Riemannian connection on a surface or Riemannian 2-manifold refers to several intrinsic geometric structures discovered by Tullio Levi-Civita, Élie Cartan and Hermann Weyl in the early part of the twentieth century: parallel transport, covariant derivative and connection form. These concepts were put in their current form with principal bundles only in the 1950s. The classical nineteenth century approach to the differential geometry of surfaces, due in large part to Carl Friedrich Gauss, has been reworked in this modern framework, which provides the natural setting for the classical theory of the moving frame as well as the Riemannian geometry of higher-dimensional Riemannian manifolds. This account is intended as an introduction to the theory of connections.
In mathematics, particularly differential topology, the double tangent bundle or the second tangent bundle refers to the tangent bundle (TTM,πTTM,TM) of the total space TM of the tangent bundle (TM,πTM,M) of a smooth manifold M . A note on notation: in this article, we denote projection maps by their domains, e.g., πTTM : TTM → TM. Some authors index these maps by their ranges instead, so for them, that map would be written πTM.
In mathematics, convenient vector spaces are locally convex vector spaces satisfying a very mild completeness condition.
In the theory of Lie groups, the exponential map is a map from the Lie algebra of a Lie group to the group, which allows one to recapture the local group structure from the Lie algebra. The existence of the exponential map is one of the primary reasons that Lie algebras are a useful tool for studying Lie groups.
In mathematics, the Cartan–Ambrose–Hicks theorem is a theorem of Riemannian geometry, according to which the Riemannian metric is locally determined by the Riemann curvature tensor, or in other words, behavior of the curvature tensor under parallel translation determines the metric.