Dorset and Somerset Canal

Last updated

Dorset and Somerset Canal
Murtry aqueduct 1.jpg
The north face of Murtry aqueduct
Specifications
Locks0
StatusAbandoned, not completed
History
Date of act1796
Date completednot completed
Geography
Start pointNettlebridge
End pointFrome junction
Dorset and Somerset Canal plan
BSicon uFABZgl+l.svg
BSicon uSTR+r.svg
Bristol Channel
BSicon uSTR+FEATURE@l.svg
Bristol
BSicon uSTRl.svg
BSicon uSTR+r.svg
BSicon uSTR+FEATURE@l.svg
Bath
BSicon uSTRl.svg
BSicon uSTRq.svg
BSicon uLSTR+r.svg
Jn with Kennet and Avon Canal
BSicon FEATURE.svg
BSicon FEATURE.svg
BSicon uLSTR.svg
Coleford and Mells
BSicon uLKHSTaq.svg
BSicon uLSTRq.svg
BSicon uLSTRq.svg
BSicon uLTEEr.svg
Nettlebridge basin and Frome Jn
BSicon uLSTR+FEATURE@l.svg
Wincanton
BSicon uLSTR+FEATURE@l.svg
Stalbridge
BSicon uLSTR+FEATURE@l.svg
Sturminster Newton
BSicon uLSTR+FEATURE@l.svg
Blandford
BSicon uLKHSTaq.svg
BSicon uLTEEr.svg
Wareham branch
BSicon uDOCKSa.svg
Poole Harbour
Diagram showing the arrangement of Fussell's boat lift FussellsLiftDorsetAndSomersetCanal.png
Diagram showing the arrangement of Fussell's boat lift

The Dorset and Somerset Canal was a proposed canal in southwestern England. The main line was intended to link Poole, Dorset with the Kennet and Avon Canal near Bradford on Avon, Wiltshire. A branch was to go from the main line at Frome to the southern reaches of the Somerset coalfield at Nettlebridge. Construction of the branch started in 1786, using boat lifts rather than locks to cope with changes of level, but the company ran out of money and the canal was abandoned in 1803, never to be completed.

Contents

Proposals

Plans for a major canal to link Bristol and Poole, and therefore to make travel from the Bristol Channel to the English Channel easier and safer, were proposed in 1792. The suggested route passed through Wareham, Sturminster Newton, Wincanton and Frome, joining the River Avon at Bath. Collieries in the Mendips near Nettlebridge were to be served by a branch canal, while the main trade was seen as coal travelling southwards and clay travelling northwards. A public meeting was held in Wincanton in January 1793, at which a list of subscribers was started. [1]

There were several proposals as to the precise route, and so the canal engineer Robert Whitworth was asked to survey a route. By the time he reported back in September 1793, the route started from the Kennet and Avon Canal at Freshford, Somerset, rather than Bath, and having passed through Stalbridge, headed for Blandford rather than Wareham. The new route reflected the availability of water to supply the canal. Whitworth was busy and recommended that the promoters of the scheme should employ William Bennet of Frome as engineer. Bennet completed a detailed survey in 1795, estimating that the cost of the canal would be about £200,000, and the promoters approved most of his plan at a meeting in July. Short branches to Hamworthy and Wareham were added to the scheme, and the proposed junction with the Kennet and Avon Canal was later moved to Widbrook. [2]

By the time parliamentary approval was sought, the southern end had been cut back to Shillingstone, to reduce the cost, and an act of Parliament [ which? ] was obtained on 24 March 1796, giving the company powers to raise £150,000, with an additional £75,000 if required. However, with the social changes and inflation that was occurring at the time, less than £80,000 was raised. With this, the company decided to start with the branch to Frome, [3] in order to capitalise on the lucrative markets in the coal fields and the clothing industry in Frome.

Construction

Dorset and Somerset Canal
BSicon uLSTR+l.svg
BSicon uLKHSTeq.svg
Nettlebridge basin
BSicon uLSTR.svg
BSicon gSTR.svg
Stratton Common
BSicon gSKRZ-Eu.svg
Edford bridge
BSicon ugSTRfr.svg
Edford
BSicon geuKRZo.svg
Coleford aqueduct
BSicon ugSTRfr.svg
Coleford
BSicon uLTUNNEL1.svg
unfinished tunnel at Goodeaves Farm
BSicon ugSTRfr.svg
Vobster
BSicon gSTR.svg
BSicon ugPLANEu.svg
Barrow Hill boat lift
BSicon uLSTR.svg
Five more lifts planned
BSicon geuKRZo.svg
Murtry aqueduct
BSicon uLSTR.svg
BSicon uLTEEe.svg
Frome Jn (with main line)

Construction began on the branch line, and about 8 miles (13 km) of canal was built, from Stratton Common towards Frome, passing through Coleford and Vobster. [4] The works included the three-arched Murtry Aqueduct over the Mells River in Vallis Vale, near Hapsford, [5] a larger aqueduct at Coleford, and a tunnel at Goodeaves Farm, which was not completed. [4]

Both the main line and the branch involved significant changes in level, and the act of Parliament had specified that conventional locks would be used on the main line, but that "caissons" would be used on the branch, which rose by 264 ft (80.5m) over its length. The idea of using vertical boat lifts was proposed by James Fussell, [6] owner of the nearby Mells ironworks, and his particular design, known as a balance lock, was patented in 1798. It consisted of two tanks, joined by chains which passed over large wheels. Boats entered one or both of the caissons, which each had an extra chamber below the main caisson, and the chamber of the top caisson was filled with water to provide the extra weight needed to cause the lift to operate. Although different in detail to those later used successfully on the Grand Western Canal, it was essentially very similar. [7]

Fussell built the first boat lift at Barrow Hill. It was designed to take 10-ton boats, lifting them by 20 feet (6.1 m), and was tested during September and October 1800. [8] It was formally demonstrated on 13 October 1800, [9] and the Bath Chronicle carried a glowing report 3 days later. [10]

Dorset and Somerset Canal Act 1803
Act of Parliament
Coat of Arms of the United Kingdom (1801-1816).svg
Citation 43 Geo. 3. c. cviii
Dates
Royal assent 4 July 1803
Text of statute as originally enacted

Five more lifts were to be built on the Barrow Hill section, and works started on the pits for four of them, but the company ran out of money in 1802, with 1.7 miles (2.7 km) of canal still to be excavated and the boat lifts unfinished. Having consulted an engineer called Underhill, the company obtained a second act of Parliament, the Dorset and Somerset Canal Act 1803 (43 Geo. 3. c. cviii), to allow them to raise more money and to build railways instead of the canal if this would reduce the cost, but they were unable to raise any more finance. [8] Construction ceased in 1803, and the canal was never completed. [11]

Today

Several features are still visible including a bridge that once carried the Edford to Stratton Common road over the canal [12] and an aqueduct at Coleford, with two semi-circular arches nearly 33 feet (10 m) across and a similar height. [13] The boat lift at Barrow Hill was the site of archaeological excavations in 2007. [14] The three-arched aqueduct over the River Mells at Murtry Bottom still has some 56 feet (17 m) of retaining wall attached to it. [5] A project to consider how best to conserve it has been aided by a grant from the Somerset Aggregates Levy Sustainability Fund. [15]

See also

Bibliography

Related Research Articles

<span class="mw-page-title-main">Mendip Hills</span> Range of limestone hills to the south of Bristol and Bath in Somerset, England

The Mendip Hills is a range of limestone hills to the south of Bristol and Bath in Somerset, England. Running from Weston-super-Mare and the Bristol Channel in the west to the Frome valley in the east, the hills overlook the Somerset Levels to the south and the Chew Valley and other tributaries of the Avon to the north. The highest point, at 325 metres above sea level, is Beacon Batch which is the summit area atop Black Down. The hills gave their name to the former local government district of Mendip, which administered most of the local area until April 2023. The higher, western part of the hills, covering 198 km2 (76 sq mi) has been designated an Area of Outstanding Natural Beauty (AONB), which gives it a level of protection comparable to a national park.

<span class="mw-page-title-main">Buckland Dinham</span> Human settlement in England

Buckland Dinham is a small village near Frome in Somerset, England. The village has a population of 381. The village's main industry is farming, but the village is also a dormitory village for the nearby cities of Bath and Bristol.

<span class="mw-page-title-main">Boat lift</span> Machine to move boats vertically between waterways

A boat lift, ship lift, or lift lock is a machine for transporting boats between water at two different elevations, and is an alternative to the canal lock.

<span class="mw-page-title-main">Chard Canal</span> United Kingdom legislation

The Chard Canal was a 13.5 miles (21.7 km) tub boat canal in Somerset, England, that ran from the Bridgwater and Taunton Canal at Creech St. Michael, over four aqueducts, through three tunnels and four inclined planes to Chard. It was completed in 1842, was never commercially viable, and closed in 1868. The major engineering features are still clearly visible in the landscape.

<span class="mw-page-title-main">Coleford, Somerset</span> Human settlement in England

Coleford is a village and civil parish in Somerset, England, situated on the Mells River in the Mendip Hills five miles west of Frome. The parish has a population of 2,313 in 2011.

<span class="mw-page-title-main">Somerset Coal Canal</span> Canal in Somerset, England

The Somerset Coal Canal was a narrow canal in England, built around 1800. Its route began in basins at Paulton and Timsbury, ran to nearby Camerton, over two aqueducts at Dunkerton, through a tunnel at Combe Hay, then via Midford and Monkton Combe to Limpley Stoke where it joined the Kennet and Avon Canal. This link gave the Somerset coalfield access east toward London. The longest arm was 10.6 miles (17.1 km) long with 23 locks. From Midford an arm also ran via Writhlington to Radstock, with a tunnel at Wellow.

<span class="mw-page-title-main">Holcombe, Somerset</span> Human settlement in England

Holcombe is a small village and civil parish in the Mendip local government district of Somerset, England. The parish contains the hamlets of Barlake and Edford. It is within easy commuting distance of both Bristol and Bath.

<span class="mw-page-title-main">Whatley, Mendip</span> Human settlement in England

Whatley is a small rural village and civil parish about 2.5 miles (4 km) west of Frome in the English county of Somerset. The parish lies south of Mells and north of Nunney, and includes the hamlets of Lower Whatley and Chantry.

<span class="mw-page-title-main">Balance lock</span> Type of boat lift

The balance lock was a type of boat lift designed by James Fussell (1748-1832) to transport boats up and down a hillside on a canal. An experimental balance lock was built as part of the Dorset and Somerset Canal and work was started for four more, but the project failed for financial reasons and they were not completed.

James Fussell IV (1748–1832) was an iron magnate operating the Old Iron Works, Mells in Vallis Vale between Mells and Great Elm in Somerset. He was a promoter of the Dorset and Somerset Canal and the inventor of both the roller chain and the balance lock.

<span class="mw-page-title-main">Old Iron Works, Mells</span> Ruined iron works in Somerset, England

Old Iron Works, Mells is a 0.25 hectare biological Site of Special Scientific Interest, in the Wadbury Valley, south of the village of Mells in Somerset, notified in 1987. The site is a ruined iron works, which mainly produced agricultural edge-tools that were exported all over the world, and is now, in addition to its unique and major importance in relation to industrial archaeology, used as a breeding site by horseshoe bats. The block of buildings adjacent to the entrance is listed Grade II* and most of the rest of the site is a Scheduled Ancient Monument. It is included in the Heritage at Risk Register produced by English Heritage.

<span class="mw-page-title-main">Dundas Aqueduct</span> Bridge in Limpley Stoke

Dundas Aqueduct is an aqueduct in England which carries the Kennet and Avon Canal over the River Avon and the Wessex Main Line railway. The aqueduct is near Monkton Combe, Somerset, and is about 2+12 miles (4 km) south-east of the city of Bath.

<span class="mw-page-title-main">Somerset Coalfield</span> Coalfield in northern Somerset, England

The Somerset Coalfield in northern Somerset, England is an area where coal was mined from the 15th century until 1973. It is part of a larger coalfield which stretched into southern Gloucestershire. The Somerset coalfield stretched from Cromhall in the north to the Mendip Hills in the south, and from Bath in the east to Nailsea in the west, a total area of about 240 square miles (622 km2). Most of the pits on the coalfield were concentrated in the Cam Brook, Wellow Brook and Nettlebridge Valleys and around Radstock and Farrington Gurney. The pits were grouped geographically, with clusters of pits close together working the same coal seams often under the same ownership. Many pits shared the trackways and tramways which connected them to the Somerset Coal Canal or railways for distribution.

The Bristol and North Somerset Railway was a railway line in the West of England that connected Bristol with Radstock, through Pensford and further into northern Somerset, to allow access to the Somerset Coalfield. The line ran almost due south from Bristol and was 16 miles (26 km) long.

<span class="mw-page-title-main">Semington Aqueduct</span> Bridge in Semington

Semington Aqueduct is an aqueduct at Semington, Wiltshire, England, UK. It carries the Kennet and Avon Canal over the Semington Brook.

<span class="mw-page-title-main">John Billingsley (agriculturist)</span>

John Billingsley (1747–1811) was an agricultural pioneer in 18th-century Somerset, England.

<span class="mw-page-title-main">Transport in Somerset</span> Overview of transport in Somerset

The earliest known infrastructure for transport in Somerset is a series of wooden trackways laid across the Somerset Levels, an area of low-lying marshy ground. To the west of this district lies the Bristol Channel, while the other boundaries of the county of Somerset are along chains of hills that were once exploited for their mineral deposits. These natural features have all influenced the evolution of the transport network. Roads and railways either followed the hills, or needed causeways to cross the Levels. Harbours were developed, rivers improved, and linked to sources of traffic by canals. Railways were constructed throughout the area, influenced by the needs of the city of Bristol, which lies just to the north of Somerset, and to link the ports of the far south-west with the rest of England.

<span class="mw-page-title-main">Mells River</span> River in Somerset, England

The Mells River flows through the eastern Mendip Hills in Somerset, England. It rises at Gurney Slade and flows east joining the River Frome at Frome.

William Bennet was an English civil engineer, noted for his work on canals. Nothing is known of his early life or family history, but details of his work from about 1790 until 1826 are documented. His major projects were for the Dorset and Somerset Canal and the Somersetshire Coal Canal.

<span class="mw-page-title-main">Murtry Aqueduct</span> Grade II listed aqueduct in the United kingdom

Murtry Aqueduct is a three-arched aqueduct that was intended to carry the Dorset and Somerset Canal over the Mells River, near Frome in Somerset, England. It is a grade II listed building.

References

Commons-logo.svg Media related to Dorset and Somerset Canal at Wikimedia Commons