LNER Thompson/Peppercorn Class K1

Last updated

LNER Thompson/Peppercorn
Class K1
Thompson 5P6F 2-6-0 K1 class number 62005.jpg
Preserved loco No. 62005 (as "2005") at Carnforth
Type and origin
Power typeSteam
Designer E. Thompson; A. H. Peppercorn
Builder North British Locomotive Company
Serial number26605–26674
Build date1949–1950
Total produced70
Specifications
Configuration:
   Whyte 2-6-0
   UIC 1′C h2
Gauge 4 ft 8+12 in (1,435 mm)
Leading dia. 3 ft 2 in (0.965 m)
Driver dia.5 ft 2 in (1.575 m)
Length59 ft 10 in (18.24 m) over buffers
Loco weight66 long tons (67 t)
Tender weight52 long tons (53 t)
Fuel typeCoal
Fuel capacity7.5 long tons (7.6 t)
Water cap.4,200 imperial gallons (19,000 L; 5,000 US gal)
Firebox:
  Grate area27.9 sq ft (2.59 m2)
BoilerLNER diagram 116
Boiler pressure225 lbf/in2 (1.55 MPa)
Heating surface:
  Firebox168 sq ft (15.6 m2)
  Tubes858 sq ft (79.7 m2)
  Flues382 sq ft (35.5 m2)
  Total surface1,408 sq ft (130.8 m2)
Superheater:
  Heating area300 sq ft (28 m2)
Cylinders 2, outside
Cylinder size 20 in × 26 in (508 mm × 660 mm)
Performance figures
Tractive effort 32,080 lbf (142.70 kN)
Career
Operators British Railways
Power class5P6F
Numbers62001–62070
Axle load class Route Availability 6
Locale
Withdrawn1962–1967
DispositionOne preserved, remainder scrapped

The London and North Eastern Railway (LNER) Class K1 is a type of 2-6-0 (mogul) steam locomotive designed by Edward Thompson. Thompson preferred a simple two-cylinder design instead of his predecessor Nigel Gresley's three-cylinder one. The seventy K1s were intended to be split between the North Eastern Region of British Railways and the Eastern Region of British Railways.

Contents

Prototype

Prototype K1 No. 61997 'MacCailin Mor' in Doncaster Carr Locomotive Yard 23 April 1961 Doncaster Carr Locomotive Yard geograph-2865280-by-Ben-Brooksbank.jpg
Prototype K1 No. 61997 'MacCailin Mor' in Doncaster Carr Locomotive Yard 23 April 1961

LNER Class K4 number 3445 MacCailin Mor was rebuilt in 1945 at Darlington Works as a two-cylinder prototype of the K1 class, designated K1/1. Thompson entrusted the rebuilding of No. 3445 as a two-cylinder Mogul to his principal assistant Arthur Peppercorn. This locomotive became British Railways No. 61997, and was withdrawn from service in 1962.

Production

When Peppercorn replaced Thompson as chief mechanical engineer, he made the rebuilding the basis for a new class of 2-cylinder 2-6-0. Several modifications were made. The running plates were redesigned to improve access to the cylinder steam chests and there were changes to the leading pony truck, the cylinder linings and the boiler. The new engines were also longer and received larger tenders that held 4,200 gallons of water instead of the K4's 3,500 gallon tenders.

An order for 70 of the new mixed traffic 2-6-0s was placed with the North British Locomotive Company of Glasgow. They were the last steam locomotives built to an LNER design, although all were delivered under British Railways auspices. Numbered 62001–62070 they entered service between May 1949 and March 1950.

Operation

The Peppercorn K1s proved to be useful and versatile engines. They worked extensively over ex-LNER territory but were chiefly associated with North East England, and like their K4 predecessors, the West Highland Line. Like many post-nationalisation classes, the K1s had relatively brief lives. All were withdrawn between 1962 and 1967, but the last to be retired was ultimately preserved. They were capable of reaching speeds of up to 50 miles per hour, or 45 miles per hour while running tender first. [1]

Preservation

No. 62005 "Lord of the Isles" crossing the Glenfinnan Viaduct on the Scottish Adventure, July 2012 A Scottish Adventure- The Jacobite over Glenfinnan Viaduct.jpg
No. 62005 "Lord of the Isles" crossing the Glenfinnan Viaduct on the Scottish Adventure, July 2012

One example of the class, No. 62005, which was also the final member in service before its withdrawal, has been preserved, and is based at the North Yorkshire Moors Railway. It was acquired as a source of a spare boiler for the solitary preserved K4, but in 1972, the K1 was donated, still with its boiler, to the North Eastern Locomotive Preservation Group. It was also used as a stationary boiler at ICI North Tees Port Clarence Works for a period of 6 weeks. [2] It was eventually placed into storage at Neville Hill where it was later obtained by Viscount Garnock, Geoff Drury, George Nissen, and Brian Hollingsworth as a spare boiler for the sole surviving member of the Gresley K4 moguls 61994 The Great Marquess. The plans for the stationary boiler fell through and the locomotive was eventually purchased by the 45428 Stanier Class 5 Locomotive Society Ltd and was later donated to the NELPG. [3] [4]

By 1975, the K1 had been restored to main line running order and made an appearance at the Stockton and Darlington Railway 150th-anniversary celebrations at Shildon, County Durham. Since then the NELPG has endeavoured to keep the locomotive available for use on the main line. While it is usually based on the North Yorkshire Moors Railway, 62005 spends most of its time on the summer Fort William-Mallaig Jacobite service (numbered as 2005 in 1988 at least), recalling memories of the K1s in Scotland.

The locomotive spent much of its early time in preservation numbered 2005 and in LNER apple green livery. This livery is not historically accurate, as the engine was built in 1949 after nationalisation and never had this livery when in service. It was repainted in BR lined black as No. 62005 in the late 1990s, and wears this livery to date.

In 2005, it carried the name previously carried by K4 61996 (LNER 3444) Lord of the Isles during its service hauling The Jacobite for the West Coast Railway Company. [5] [6]

Related Research Articles

LNER Class A4 4488 <i>Union of South Africa</i> LNER Class A4 steam locomotive built in Doncaster in 1937

60009 Union of South Africa is a LNER Class A4 steam locomotive built at Doncaster Works on 16 April 1937. It is one of six surviving A4s. Its mainline certification expired in April 2020. As the locomotive is subject to a boiler inspection, it was moved to the East Lancashire Railway as the original plan was to keep it running there until the end of boiler certificate and then send it somewhere else for static display, but a cracked boiler tube forced it into retirement prematurely. It was briefly renamed Osprey during part of the 1980s and 1990s due to political opposition against apartheid in South Africa at the time.

<span class="mw-page-title-main">LNER Thompson Class B1</span> Class of locomotives

The London and North Eastern Railway (LNER) Thompson Class B1 is a class of steam locomotive designed by Edward Thompson for medium mixed traffic work.

<span class="mw-page-title-main">LNER Peppercorn Class A1</span> Class of British 4-6-2 locomotives

London and North Eastern Railway's (LNER) Peppercorn Class A1 is a class of 4-6-2 "Pacific" steam locomotives largely built between 1948 and 1949 at Doncaster and Darlington Works to a design of Arthur Peppercorn. Forty-nine were built for hauling express passenger services on the East Coast Main Line owned by LNER's successor, British Railways' North Eastern Region. None of the original 49 Peppercorn A1s survived into preservation, with the last being scrapped in 1966. The 50th Peppercorn A1, 60163 Tornado, was completed in 2008 as an evolved member of its class.

<span class="mw-page-title-main">LNER Gresley Classes A1 and A3</span> Class of 4-6-2 pacific locomotive designed by Sir Nigel Gresley

The London and North Eastern Railway Gresley Classes A1 and A3 locomotives represented two distinct stages in the history of the British 4-6-2 "Pacific" steam locomotives designed by Nigel Gresley. They were designed for main line passenger services and later express passenger services, initially on the Great Northern Railway (GNR), a constituent company of the London and North Eastern Railway after the amalgamation of 1923, for which they became a standard design. The change in class designation to A3 reflected the fitting to the same chassis of a higher pressure boiler with a greater superheating surface and a small reduction in cylinder diameter, leading to an increase in locomotive weight. Eventually all of the A1 locomotives were rebuilt, most to A3 specifications, but no. 4470 was completely rebuilt as Class A1/1.

<span class="mw-page-title-main">LNER Peppercorn Class A2</span> Class of 15 British 4-6-2 locomotives

The London and North Eastern Railway (LNER) Peppercorn Class A2 is a class of steam locomotive designed for express passenger work by Arthur Peppercorn, the chief designer of the LNER after Edward Thompson. All save the first of the 15 built were constructed under British Railways after nationalisation in 1948. Only one example is preserved.

Arthur Henry Peppercorn, was an English railway engineer, and was the last Chief Mechanical Engineer (CME) of the London and North Eastern Railway.

<span class="mw-page-title-main">GNR Class H4</span>

The Great Northern Railway Class H4 was a class of 2-6-0 steam locomotive designed for mixed-traffic work.

Edward Thompson was an English railway engineer, and was Chief Mechanical Engineer of the London and North Eastern Railway between 1941 and 1946. Edward Thompson was born at Marlborough, Wiltshire on 25 June 1881. He was the son of Francis Thompson, assistant master at Marlborough College. He was educated at Marlborough before taking the Mechanical Science Tripos at Pembroke College, Cambridge, earning a third class degree. Thompson entered the railway scene after education, contrasting that of his predecessor Nigel Gresley, who had also attended Marlborough after gaining practical experience as a pupil at Horwich Works.

<span class="mw-page-title-main">LNER Class K4</span>

The London and North Eastern Railway (LNER) Class K4 is a class of 2-6-0 steam locomotives designed by Nigel Gresley for the steep grades of the West Highland Line.

<span class="mw-page-title-main">SR U1 class</span>

The SR U1 class were three-cylinder 2-6-0 ('mogul') steam locomotives designed by Richard Maunsell for passenger duties on the Southern Railway. The fifth member of the Maunsell "family" of standardised moguls and 2-6-4 locomotives, the U1 was the final development of the Maunsell mogul, and marked a continuation of the basic principles established by CME George Jackson Churchward for the GWR. Developed from Maunsell's previous SR U class design, the U1 class shared characteristics with Churchward's GWR 4300 Class.

<span class="mw-page-title-main">LNER Thompson Class L1</span>

The London and North Eastern Railway (LNER) Thompson Class L1 was a class of 2-6-4T steam locomotives designed by Edward Thompson. The prototype no. 9000 was built in 1945, but the remaining 99 were built under British Railways jurisdiction between 1948–1950. The prototype was well received, however the production batch were not, and all were withdrawn and scrapped between 1960 and 1962.

<span class="mw-page-title-main">LNER Class A2</span>

The first London and North Eastern Railway (LNER) Class A2 was a class of 4-6-2 steam locomotive designed by Vincent Raven for the North Eastern Railway. Two were built by the NER in 1922 before the grouping and another three by the LNER in 1924. Their LNER numbers were 2400–2404. All five locomotives were named by the LNER.

<span class="mw-page-title-main">LNER Thompson Class A1/1</span>

The LNER Class A1/1 consisted of a single 4-6-2 "Pacific" express passenger locomotive rebuilt in 1945 from an A1 class locomotive, by Edward Thompson. It was intended as the prototype of a new design of pacific locomotives improving the A4 design of Thompson's predecessor Sir Nigel Gresley. No further examples were built due to Thompson's retirement in 1946.

<span class="mw-page-title-main">GNR Class H3</span> Class of 65+10 British 2-6-0 locomotives

The Great Northern Railway Class H2 and H3 was a class of 2-6-0 steam locomotive designed for mixed-traffic work.

LNER Peppercorn Class A2 60532 <i>Blue Peter</i> 4-6-2 locomotive built 1948

LNER Peppercorn Class A2 No. 60532 Blue Peter is a 4-6-2 ("Pacific") steam locomotive built in 1948 at Doncaster Works to a design by Arthur Peppercorn, hauling express passenger services on British Railways' North Eastern Region. It is the only Peppercorn A2 in existence after the 14 other locomotives of its class were scrapped.

Willie Brayshaw Yeadon, was a British railway historian known for his magnum opus, Yeadon's Register of LNER Locomotives and other works.

The London and North Eastern Railway (LNER) operated various classes steam locomotives with a 4-6-2 wheel arrangement. The LNER operated more pacifics than any other of the Big Four British railway companies, and they were mostly used for express passenger work along the East Coast Main Line, though later in their lives many were displaced to other lines.

<span class="mw-page-title-main">LNER Thompson Class A2/1</span>

The London and North Eastern Railway (LNER) Thompson Class A2/1 was a class of 4-6-2 steam locomotives built at Darlington locomotive works during 1944. They were originally ordered as Class V2 locomotives, as designed by Sir Nigel Gresley, but were revised during construction into a 4-6-2 'Pacific' arrangement under the instruction of Edward Thompson.

<span class="mw-page-title-main">LNER Thompson Class A2/3</span> Class of British express passenger locomotive

The London and North Eastern Railway (LNER) Class A2/3 was a class of 4-6-2 steam locomotives. They were newly constructed locomotives, fulfilling the requirement identified by Edward Thompson for a standard express passenger locomotive of the 4-6-2 arrangement with 6 ft 2 in (1.880 m) driving wheels. Fifteen engines were constructed according to this original design, but following the retirement of Thompson as CME, the remaining fifteen locomotives that were planned were immediately redesigned and ultimately emerged as Peppercorn Class A2.

<span class="mw-page-title-main">LNER Thompson Class A2/2</span> British steam locomotive

The London and North Eastern Railway Class A2/2 was a class of six 4-6-2 steam locomotives rebuilt by Edward Thompson in 1943 and 1944 from his predecessor Sir Nigel Gresley's P2 Class of 2-8-2 express passenger locomotives. The rebuilds improved reliability and reduced maintenance, but also suffered from a variety of issues during service, and all were withdrawn and scrapped between 1959 and 1961.

References

  1. Lloyd, Martin (13 February 2009). "History of K1 class locomotive 62005 Lord of the Isles". North Eastern Locomotive Preservation Group. Retrieved 19 September 2020.
  2. Widdowson, Keith (2015). Riding Yorkshire's Final Steam Trains: Journeys on BR's North Eastern Region. The History Press. ISBN   978-0-7509-6416-6. OCLC   911957536.
  3. Marsden, Richard. "The Thompson K1/1 and Peppercorn K1 2-6-0 Moguls". LNER Encyclopedia. Winwaed Software Technology LLC. Retrieved 29 September 2020.
  4. "62005". Preserved British Steam Locomotives. WordPress.com. Retrieved 29 September 2020.
  5. Hirsch, Oren. "West Coast Railway Company". Oren's Transit Page. Retrieved 30 October 2020.
  6. Marshall, Patrica. "The Jacobite". West Coast Railways. Retrieved 30 October 2020.