![]() Minisail Monaco Mk 1 MS10 hull profile | |
Development | |
---|---|
Designer | Ian Proctor |
Year | 1959 |
Name | Minisail |
Boat | |
Crew | 1 + 1 |
Hull | |
Type | Scow |
Construction | Variants: GRP, plywood, mixed |
LOA | 3.96m |
Beam | 1.11m |
Rig | |
Rig type | Unstayed Bermuda |
Sails | |
Total sail area | 7.4 sq m |
Racing | |
RYA PN | 1225 |
The Minisail is a 13-foot single-handed dinghy [1] which was designed by Ian Proctor in 1959 and became popular in the 1960s. [2] It was the predecessor to the Topper and was the first British production boat to popularise the idea of the "sailing surfboard". As the Topper gained popularity in the 1980s, the Minisail disappeared from the scene. However, on 28 August 2011, a group of enthusiasts restarted the Minisail Class Association, [3] [4] which now has a small but committed following mainly in north-west Europe. The class association website is https://www.minisail.org.uk/
The Minisail was inspired by the American Sailfish dinghy which David Thorpe and Ian Proctor had viewed whilst in the US, [5] [6] and was the first British attempt to create, in effect, a sailing surfboard. The initial prototype was built by Chippendales Boatyard in Emsworth, near the home of the designer Ian Proctor, and subsequently also licensed for initial production to Bossoms Boatyard and PlyCraft.
It was noted for its rapid acceleration. [7] Even by modern standards, the Minisail is quick onto the plane in marginal conditions. Thorpe noted after sailing the prototype for the first time that ' I remember the sensation of sailing the prototype with its rapid acceleration was very different to sailing any other dinghy.'
By 1962, Chippendale, Bossoms and Plycraft dropped out of the picture and by 1963 the first fibreglass boats were produced. Eight were presented to HMS Devonshire, a guided missile cruiser, and described as the "finest piece of sports equipment the ship had ever had".
The boat found success when the Richmond Marine Company, who were manufacturing the boats at the time, convinced the Brighton Sailing Club to introduce it as a racing class, leading to increased coverage and its adoption as a racing dinghy in other sailing clubs. [8]
The MiniSail was designed for two people to sail, as can be seen in the early advertising, although two large adults would find it a challenge. It is better considered as a "1 plus 1" - suitable for an adult and child. It has always been raced as a single-hander.
The Minisail has always been a semi-development class, and a number of variants appeared quite quickly in the early years. There are two basic hull shapes; one has a shallow V-shape at the bows, whilst the other is slightly shorter and is flat-bottomed, making it easier to construct at home in plywood. Many hulls were manufactured in GRP. [9] The original Monaco Mk.1 Minisails had no cockpit, just a shallow depression. Later, the Monaco Mk.2 appeared which had a centre cockpit; later still, the MiniSprint appeared which had a self-draining cockpit extending to the stern and a pivoting centreplate in place of the earlier dagger board.[ citation needed ]
In spite of all the variants, there was competitive racing between the various designs; no one design dominated in the National Championships.[ citation needed ]
David Thorpe wrote '' It would be interesting to place a MiniSprint Mk2 alongside the original MiniSail MK 1 and to see the extent to which Ian Proctor’s various MiniSail designs have almost gone round in a circle. Each one of them has filled a need at a particular time and, in this writer’s view, each one is a design classic – perfect both visually and in function.''
Types of MiniSails in existence in order of historical appearance:
Monaco I (w) (1959) | Wood flush deck – only a few now in existence – not available new. |
Monaco I (1963) | Glass flush deck – a number still around in the second-hand market sail numbers- if in good condition a potential fast boat good in the sea – not available new. |
Sprite I (Middle Sixties) | Wood flush deck – platen bottom – the ‘original flying punt’ – available second hand plans available from Richmond Marine for home construction. |
Monaco II (Middle-late Sixties) | As Monaco I in hull shape but with cockpit – available now as basic MiniSail from Richmond Marine – extensive second hand market (but consult committee) |
Sprite II (Middle-late Sixties) | As Sprite I but with cockpit – plans available from Richmond Marine plus also kits – moderate second hand market |
Sprint I (1973) | As Monaco II of lighter construction with tracked boom and footed sail – Mustard colour – good second hand market – one or two available from Richmond Marine |
Sprint II (1975) | As Sprint I in hull design with a slightly deeper trunked section, self-draining cockpit, built-on sliding seat, optional centre sheeting and drop centre board – available new from Richmond Marine |
(Meeson) (1975) | as Sprint II in grp hull design and drop centre board slot but with flush deck, optional sail plan. The deck is of wood. |
Source: Minisail Yearbook 1975
The Topper is an 11 foot 43 kg (95 lb) sailing dinghy designed by Ian Proctor. The Topper was a one-design boat until 2023 when a new version was produced, and is sailed mostly around the British Isles. It was recognised as a World Sailing Class. The boat previously constructed from polypropylene, and now roto moulded, is popular as a racing boat or for sail training. The class association (itca) organise racing events, which range from small travellers to major championships. The RYA run squads alongside the events; in these squads young sailors who are given specialist race coaching.
The Wayfarer is a wooden or fibreglass hulled fractional Bermuda rigged sailing dinghy of great versatility; used for short 'day boat' trips, longer cruises and for racing. Over 11,000 have been produced as of 2016.
Planing is the mode of operation for a waterborne craft in which its weight is predominantly supported by hydrodynamic lift, rather than hydrostatic lift (buoyancy).
The Buccaneer 18, also called the Buccaneer dinghy and the Gloucester 18, is an American planing sailing dinghy that was designed in 1966 by Rod Macalpine-Downie and Dick Gibbs as a one-design racer and day sailer. The prototype was first shown in 1967 at Yachting's "One of a Kind" Regatta, in which it placed second.
The Fireball is a British sailing dinghy that was designed by Peter Milne as a one-design racer and first built in 1962.
The Snipe is an American sailing dinghy that was designed by William F. Crosby as a one design racer and first built in 1931.
The A Scow is an American scow-hulled sailing dinghy that was designed by John O. Johnson as a racer and first built in 1901.
The Rhodes 19 is an American trailerable day sailer or sailing dinghy, that was designed by Philip Rhodes as a one-design racer and first built in 1958.
The Bell Woodworking Seagull and Seamew are both small sloop-rigged marine ply sailing boats of the Trailer yacht type designed by Ian Proctor, who was also responsible for the design of many small sailing dinghies in seven different classes including the extremely popular Topper, and Wanderer.
Ian Douglas Ben Proctor was a British designer of boats, both sailing dinghies and cruisers. He had more than one hundred designs to his credit, from which an estimate of at least 65,000 boats were built. His pioneering aluminium mast designs also revolutionised the sport of sailing.
Phil Morrison is a British boat designer and racer rendered notable by the success of his many designs in many classes since 1967 as well as his own distinguished yacht racing career.
The CL 16, or CL16, is a Canadian sailing dinghy that was designed by Ian Proctor, Graham Dodd and George Blanchard, as a cruiser and daysailer, and first built in 1968.
The Pearson Ensign, or Ensign 22, is an American trailerable sailboat that was designed by Carl Alberg as a one-design racer and day sailer and first built in 1962. It is the largest full-keel one-design keelboat class in the United States.
The Gull sailing dinghy was designed by Ian Proctor in 1956, originally as a frameless double-chine plywood boat. However, it has been through several incarnations: the wooden Mark I, GRP Mark III, GRP Gull Spirit and GRP Gull Calypso. Today it is popular with sailing schools, especially in the United Kingdom.
The Buzz is a sailing dinghy designed in 1994 by Ian Howlett and John Caig and manufactured by Reg White Limited of Brightlingsea as part of the "White Formula" range of boats originally marketed by Topper International Ltd but since 2013 by Vantage Sailing. The Buzz is a double handed racing boat, with a single trapeze for the crewman. The boat has a fully battened mainsail, furling jib and an asymmetrical spinnaker. There have been around 500 boats built. The Buzz is designed to be an easy to sail boat, but it can also be raced competitively.
The Topaz Omega is a sailing dinghy created by Topper International designed for between 1 and 7 crew members. It is sailed at many clubs around the world and is an ISAF 'Learn to Sail' class.
The Topaz Vibe is a British sailing dinghy designed by Ian Howlett and Rob White. Built by Topper International, it was first introduced in 2006. There are two models, the Vibe and the Vibe X, with the latter carrying larger sails. The Vibe is a World Sailing Learn to Sail class.
The Laser 28 is a Canadian-built sailboat designed by New Zealander Bruce Farr and first produced in 1984.
Bossoms Boatyard is located opposite Port Meadow, Oxford, England, on the bank of the River Thames.
The Bridges Point 24 is an American trailerable sailboat that was designed by Joel White as a daysailer and cruiser and first built in 1985.