Carbon nanothread

Last updated

A carbon nanothread (also called diamond nanothread) is a sp3-bonded, one-dimensional carbon crystalline nanomaterial. The tetrahedral sp3-bonding of its carbon is similar to that of diamond. Nanothreads are only a few atoms across, more than 20,000 times thinner than a human hair. They consist of a stiff, strong carbon core surrounded by hydrogen atoms. Carbon nanotubes, although also one-dimensional nanomaterials, in contrast have sp2-carbon bonding as is found in graphite. The smallest carbon nanothread has a diameter of only 0.2 nanometers, much smaller than the diameter of a single-wall carbon nanotube. [1]

Contents

Synthesis

Nanothreads are synthesized by compressing liquid benzene to an extreme pressure of 20 GPa (around 200,000 times the air pressure at the surface of the Earth), and then slowly relieving that pressure. [2] The mechanochemical [3] synthesis reaction can be considered a form of organic solid state chemistry. The benzene chains form extremely thin, tight rings of carbon that are structurally similar to diamonds. [4] Researchers at Cornell University have traced pathways from benzene to nanothreads, which may involve a series of organic [4+2] cycloaddition reactions along stacks of benzene molecules, followed by further reactions of unsaturated bonds. [5] Recently synthesis of macroscopic single crystal arrays of nanothreads hundreds of microns in size has been reported. [3] The order and lack of grain boundaries in single crystals is often very desirable because it facilitates both applications and characterization. In contrast, carbon nanotubes form only thin crystalline ropes. Control of the rate of compression and/or decompression appears to be important to the synthesis of polycrystalline and single crystal nanothreads. [2] [3] Slow compression/decompression may favor low energy reaction pathways. [3] If the synthesis pressure for nanothreads can be reduced to 5 to 6 GPa, which is the pressure used for synthesis of industrial diamond, production on a large scale of >106 kg/yr would be possible. Recent advance on using strained cage-like molecules such as cubane as a precursor has successfully brought down the synthesis pressure to 12 GPa. Expanding the precursor library to non-aromatic, strained molecules offers new avenues to explore scalable production of carbon nanothreads. [6]

The formation of nanothread crystals appears to be guided by uniaxial stress (mechanical stress in a particular single direction), to which the nanothreads consistently align. [3] Reaction to form the crystals is not topochemical, [7] as it involves a major rearrangement from a lower symmetry monoclinic benzene crystal to a higher symmetry hexagonal nanothread crystal. Topochemical reactions generally require commensuration between the periodicities and interatomic distances between reactant and product. The distances between benzene molecules with van der Waals separations between them must shrink by 40% or more as the short, strong covalent carbon-carbon bonds between them form during the nanothread synthesis reaction. Such large changes in geometry usual break up crystal order, but the nanothread reaction instead creates it. Even polycrystalline benzene reacts to form macroscopic single crystal packings of nanothreads hundreds of microns across. [3] Topochemical solid state reactions such as the formation of single crystal polydiacetylenes from diacetylenes usually require a single crystal reactant to form a single crystal product.

The impetus for the formation of a hexagonal crystal appears to be the packing of circular cross section threads. [3] The details of how it is possible to transform from a monoclinic benzene crystal to a hexagonal nanothread crystal are not yet fully understood. Further development of the theory of the effect of pressure on reactions may help. [8]

Organic synthesis efforts towards polytwistane nanothreads have been reported. [9]

Rotating polytwistane, a prototypical nanothread structure. Black atoms are carbon. Light grey atoms are hydrogen. Polytwistane.gif
Rotating polytwistane, a prototypical nanothread structure. Black atoms are carbon. Light grey atoms are hydrogen.
Polytwistane crystal viewed down its hexagonal c axis. Black atoms are carbon and pink atoms are hydrogen. The length of the threads is going into the page, showing their circular cross section and hexagonal packing that (experimentally) extends over hundreds of microns in crystals. The outline of the hexagonal unit cell is shown in blue. These crystals exfoliate into bundles of nanothreads. Polytwistane Crystal.png
Polytwistane crystal viewed down its hexagonal c axis. Black atoms are carbon and pink atoms are hydrogen. The length of the threads is going into the page, showing their circular cross section and hexagonal packing that (experimentally) extends over hundreds of microns in crystals. The outline of the hexagonal unit cell is shown in blue. These crystals exfoliate into bundles of nanothreads.

History

In popular culture, diamond threads were first described by Arthur C. Clarke in his sci-fi novel The Fountains of Paradise set in the 22nd century, written in 1979.

Nanothreads were first investigated theoretically in 2001 by researchers at Penn State University [12] and later by researchers at Cornell University. [13] In 2014, researchers at Penn State University created the first sp3-carbon nanothreads in collaboration with Oak Ridge National Laboratory and the Carnegie Institution for Science. [2] Prior to 2014, and despite a century of investigation, benzene was thought to produce only hydrogenated amorphous carbon when compressed. [14] As of 2015, threads at least 90 nanometers in length had been created (compared to .5 meters for CNTs).

Structure

Since “diamond nanothreads” are sp3-bonded and one-dimensional they are unique in the matrix of hybridization (sp2/sp3) and dimensionality (0D/1D/2D/3D) for carbon nanomaterials. [15]

Assuming a topological unit cell of one or two benzene rings with at least two bonds interconnecting each adjacent pair of rings, 50 topologically distinct nanothreads have been enumerated. 15 of these are within 80 meV/carbon atom of the most stable member. [11] Some of the more commonly discussed nanothread structures are known informally as polytwistane, tube (3,0), and Polymer I. Polytwistane is chiral. [11] [10] Tube (3,0) can be thought of as the thinnest possible thread that can be carved out of the diamond structure, consisting of stacked cyclohexane rings. [12] Polymer I was predicted to form from benzene at high pressure. [13]

Although there is compelling evidence from two dimensional X-ray diffraction patterns, transmission electron diffraction, and solid-state nuclear magnetic resonance (NMR) for a structure consisting of hexagonally packed crystals of 6.5 Angstrom diameter nanothreads with largely (75 to 80%) sp3-bonding, [2] [3] the atomic structure of nanothreads is still under investigation. Nanothreads have also been observed by transmission electron microscopy. [2] Individual threads have been observed to pack in hexagonal crystals and layer-lines indicative of order along their length have been observed. [16]

Nanothreads have also been classified by their degree of saturation. [5] Fully saturated degree 6 nanothreads have no double bonds remaining. Three bonds form between each pair of benzene molecules. Degree 4 nanothreads have a double bond remaining from benzene and thus only two bonds formed between each pair of benzene molecules. Degree 2 have two double bonds remaining. Unless otherwise specified the term nanothread is assumed to refer to a degree six structure.

NMR has revealed that nanothread crystals consist of both degree 6 and degree 4 threads. [17] Moreover, spin diffusion experiments show that the sections of the threads that are fully saturated degree 6 must be at least 2.5 nm long, if not longer. NMR also shows that no second hydrocarbon or carbon phase is present in nanothread crystals. Thus all of the sp2 carbon is either in degree 4 nanothreads or small amounts of aromatic linker molecules, or even smaller amounts of C=O groups. NMR provides the chemical structural information necessary to refine syntheses towards pure degree 6 nanothreads, which are stronger than the partially saturated ones. [18]

Carbon nitride nanothreads

Pyridine compressed slowly under pressure forms carbon nitride C5H5N nanothread crystals. [19] They exhibit the six-fold diffraction "signature" of nanothread formation. NMR, chemical analysis and infrared spectroscopy provide further evidence for the synthesis of nanothreads from pyridine. Pyridine nanothreads incorporate significant amounts of nitrogen directly into their backbone. In contrast sp2 carbon nanotubes can only be doped with a small amount of nitrogen. A wide range of other functionalized nanothreads may be possible, [20] as well as nanothreads from polycyclic aromatic hydrocarbon molecules. [21]

Smallest nanothreads

Extending the ability to design and create nanothread architecture from a non-aromatic, saturated molecule has been a recent interest in order to achieve an entirely sp3-bonded nanothread structure. Hypothetical nanothread architectures built from the smallest diamondoids (adamantane) have been proposed to have higher mechanical strength than benzene nanothreads. [22] The first experimental synthesis of a novel purely sp3 bonded one-dimensional carbon nanomaterial is realized via an endogenous solid-state polymerization of cubane. Pre-arranged cubane monomers in the bulk crystal undergo diradical polymerization guided by applied uniaxial stress, similar to benzene, produce a single-crystalline carbon nanomaterial. The cubane-derived nanothread exhibits a linear diamond structure with subnanometre-diameter of 0.2 nm, which is considered as the smallest member in the carbon nanothread family; thus, they promise to form the stiffest one-dimensional system known. [23]

Properties

Every type of nanothread has a very high Young's modulus (stiffness). The value for the strongest type of nanothread is around 900 GPa compared to steel at 200 GPa and diamond at over 1,200 GPa. [24] The strength of carbon nanothreads may rival or exceed that of carbon nanotubes (CNTs). Molecular dynamics and Density functional theory simulations have indicated a stiffness on the order of carbon nanotubes (approx. 850 GPa) and a specific strength of approx. 4 × 107 N·m/kg. [25] [18]

Much as graphite exfoliates into sheets and ultimately graphene, nanothread crystals exfoliate into fibers, consistent with their structure consisting of stiff, straight threads with a persistence length of ~100 nm [25] that are held together with van der Waals forces. These fibers exhibit birefringence, as would be expected from their low dimensional character. [3] In contrast, most polymers are much more flexible and often fold into crystalline lamella (see Crystallization of polymers) rather than forming into crystals that readily exfoliate.

Modeling suggests certain nanothreads may be auxetic, with a negative Poisson ratio. [26] The thermal conductivity of nanothreads has been modeled. [27] [28] [29] Modeling indicates their Bandgaps are tunable with strain over a wide range. [30] The electrical conductivity of fully saturated nanothreads, driven by topology, may be much higher than expected. [31]

Potential applications

Nanothreads can be thought of essentially as "flexible diamond". The extremely high specific strength predicted for them by modeling has attracted attention for applications such as space elevators and would be useful in other applications related to transportation, aerospace, and sports equipment. They may uniquely combine extreme strength, flexibility, and resilience. [25] [32] Chemically substituted nanothreads may facilitate load transfer between neighbors through covalent bonding to transfer their mechanical strength to a surrounding matrix. [2] Modeling also suggests that the kinks associated with Stone-Wales transformations in nanothreads may facilitate interfacial load transfer to a surrounding matrix, making them useful for high strength composites. [33] In contrast to carbon nanotubes, bonds to the exterior of nanothreads need not disrupt their carbon core because only three of the four tetrahedral bonds are needed form it. The “extra” bond usually formed to hydrogen could be instead be linked to another nanothread or another molecule or atom. [2] Nanothreads may thus be thought of as "hybrids" that are both hydrocarbon molecules and carbon nanomaterials. Bonds to carbon nanotubes require their carbon to change from near planar sp2-bonding to tetrahedral sp3-bonding, thus disrupting their tubular geometry and possibly weakening them. Nanothreads may be less susceptible to loss of strength through defects than carbon nanotubes. [25] Thus far the extreme strength predicted for carbon nanotubes has largely not been realized in practical applications because of issues with load transfer to the surroundings and defects at various length scales from that of atoms on up.

Exfoliation into individual nanothreads may be possible, facilitating further functionalization and assembly into functional materials. [3] Theory indicates that "caged saturated hydrocarbons offering multiple σ-conductance channels (such as nanothreads) afford transmission far beyond what could be expected based upon conventional superposition laws, particularly if these pathways are composed entirely from quaternary carbon atoms." [34]

The carbon core of nanothreads is very stiff relative to the backbone of conventional polymers. They should thus be able to precisely orient molecular functions attached along their length (by substitution of hydrogen) relative to each other and to heteroatoms or unsaturated bonds in their backbone. These features may enable biological applications, [35] for example. Defects, functional groups, and/or heteroatoms [20] incorporated either into or exterior to the backbone of nanothreads with controlled orientation and distance between them may allow for robust, well controlled fluorescence. Doping and incorporation of heteroatoms such as nitrogen or boron into the nanothread backbone may allow for enhanced conducting or semiconducting properties [18] of nanothreads that allow for application as photocatalysts, electron emitters, [2] or possibly superconductors.

Modeling suggests carbon nanothread resonators exhibit low dissipation and may be useful as chemical sensors that can detect very small mass changes. [36]

Energy storage

Simulations show some achiral nanothread bundles may have specific energy density (when twisted) higher than lithium batteries. [37]

See also

Related Research Articles

<span class="mw-page-title-main">Fullerene</span> Allotrope of carbons

A fullerene is an allotrope of carbon whose molecule consists of carbon atoms connected by single and double bonds so as to form a closed or partially closed mesh, with fused rings of five to seven atoms. The molecule may be a hollow sphere, ellipsoid, tube, or many other shapes and sizes. Graphene, which is a flat mesh of regular hexagonal rings, can be seen as an extreme member of the family.

Cubane is a synthetic hydrocarbon compound with the formula C8H8, and that consists of eight carbon atoms arranged at the corners of a cube, with one hydrogen atom attached to each carbon atom. A solid crystalline substance, cubane is one of the Platonic hydrocarbons and a member of the prismanes. It was first synthesized in 1964 by Philip Eaton and Thomas Cole. Before this work, Eaton believed that cubane would be impossible to synthesize due to the "required 90 degree bond angles". The cubic shape requires the carbon atoms to adopt an unusually sharp 90° bonding angle, which would be highly strained as compared to the 109.45° angle of a tetrahedral carbon. Once formed, cubane is quite kinetically stable, due to a lack of readily available decomposition paths. It is the simplest hydrocarbon with octahedral symmetry.

<span class="mw-page-title-main">Allotropes of carbon</span> Materials made only out of carbon

Carbon is capable of forming many allotropes due to its valency. Well-known forms of carbon include diamond and graphite. In recent decades, many more allotropes have been discovered and researched, including ball shapes such as buckminsterfullerene and sheets such as graphene. Larger-scale structures of carbon include nanotubes, nanobuds and nanoribbons. Other unusual forms of carbon exist at very high temperatures or extreme pressures. Around 500 hypothetical 3‑periodic allotropes of carbon are known at the present time, according to the Samara Carbon Allotrope Database (SACADA).

<span class="mw-page-title-main">Catenation</span> Bonding of atoms of the same element into chains or rings

In chemistry, catenation is the bonding of atoms of the same element into a series, called a chain. A chain or a ring shape may be open if its ends are not bonded to each other, or closed if they are bonded in a ring. The words to catenate and catenation reflect the Latin root catena, "chain".

<span class="mw-page-title-main">Polyyne</span> Any organic compound with alternating C–C and C≡C bonds

A polyyne is any organic compound with alternating single and triple bonds; that is, a series of consecutive alkynes, (−C≡C−)n with n greater than 1. These compounds are also called polyacetylenes, especially in the natural products and chemical ecology literature, even though this nomenclature more properly refers to acetylene polymers composed of alternating single and double bonds (−CR=CR′−)n with n greater than 1. They are also sometimes referred to as oligoynes, or carbinoids after "carbyne" (−C≡C−), the hypothetical allotrope of carbon that would be the ultimate member of the series. The synthesis of this substance has been claimed several times since the 1960s, but those reports have been disputed. Indeed, the substances identified as short chains of "carbyne" in many early organic synthesis attempts would be called polyynes today.


Dynamic covalent chemistry (DCvC) is a synthetic strategy employed by chemists to make complex molecular and supramolecular assemblies from discrete molecular building blocks. DCvC has allowed access to complex assemblies such as covalent organic frameworks, molecular knots, polymers, and novel macrocycles. Not to be confused with dynamic combinatorial chemistry, DCvC concerns only covalent bonding interactions. As such, it only encompasses a subset of supramolecular chemistries.

Nanomaterial-based catalysts are usually heterogeneous catalysts broken up into metal nanoparticles in order to enhance the catalytic process. Metal nanoparticles have high surface area, which can increase catalytic activity. Nanoparticle catalysts can be easily separated and recycled. They are typically used under mild conditions to prevent decomposition of the nanoparticles.

<span class="mw-page-title-main">Nanochemistry</span> Combination of chemistry and nanoscience

Nanochemistry is an emerging sub-discipline of the chemical and material sciences that deals with the development of new methods for creating nanoscale materials. The term "nanochemistry" was first used by Ozin in 1992 as 'the uses of chemical synthesis to reproducibly afford nanomaterials from the atom "up", contrary to the nanoengineering and nanophysics approach that operates from the bulk "down"'. Nanochemistry focuses on solid-state chemistry that emphasizes synthesis of building blocks that are dependent on size, surface, shape, and defect properties, rather than the actual production of matter. Atomic and molecular properties mainly deal with the degrees of freedom of atoms in the periodic table. However, nanochemistry introduced other degrees of freedom that controls material's behaviors by transformation into solutions. Nanoscale objects exhibit novel material properties, largely as a consequence of their finite small size. Several chemical modifications on nanometer-scaled structures approve size dependent effects.

<span class="mw-page-title-main">Basketane</span> Chemical compound

Basketane is a polycyclic alkane with the chemical formula C10H12. The name is taken from its structural similarity to a basket shape. Basketane was first synthesized in 1966, independently by Masamune and Dauben and Whalen. A patent application published in 1988 used basketane, which is a hydrocarbon, as a source material in doping thin diamond layers because of the molecule's high vapor pressure, carbon ring structure, and fewer hydrogen-to-carbon bond ratio.

Covalent organic frameworks (COFs) are a class of materials that form two- or three-dimensional structures through reactions between organic precursors resulting in strong, covalent bonds to afford porous, stable, and crystalline materials. COFs emerged as a field from the overarching domain of organic materials as researchers optimized both synthetic control and precursor selection. These improvements to coordination chemistry enabled non-porous and amorphous organic materials such as organic polymers to advance into the construction of porous, crystalline materials with rigid structures that granted exceptional material stability in a wide range of solvents and conditions. Through the development of reticular chemistry, precise synthetic control was achieved and resulted in ordered, nano-porous structures with highly preferential structural orientation and properties which could be synergistically enhanced and amplified. With judicious selection of COF secondary building units (SBUs), or precursors, the final structure could be predetermined, and modified with exceptional control enabling fine-tuning of emergent properties. This level of control facilitates the COF material to be designed, synthesized, and utilized in various applications, many times with metrics on scale or surpassing that of the current state-of-the-art approaches.

<span class="mw-page-title-main">Carbon nanotube chemistry</span>

Carbon nanotube chemistry involves chemical reactions, which are used to modify the properties of carbon nanotubes (CNTs). CNTs can be functionalized to attain desired properties that can be used in a wide variety of applications. The two main methods of CNT functionalization are covalent and non-covalent modifications.

Nanoreactors are a form of chemical reactor that are particularly in the disciplines of nanotechnology and nanobiotechnology. These special reactors are crucial in maintaining a working nanofoundry; which is essentially a foundry that manufactures products on a nanotechnological scale.

In polymer chemistry, chain walking (CW) or chain running or chain migration is a mechanism that operates during some alkene polymerization reactions. CW can be also considered as a specific case of intermolecular chain transfer. This reaction gives rise to branched and hyperbranched/dendritic hydrocarbon polymers. This process is also characterized by accurate control of polymer architecture and topology. The extent of CW, displayed in the number of branches formed and positions of branches on the polymers are controlled by the choice of a catalyst. The potential applications of polymers formed by this reaction are diverse, from drug delivery to phase transfer agents, nanomaterials, and catalysis.

<span class="mw-page-title-main">Graphyne</span> Allotrope of carbon

Graphyne is an allotrope of carbon. Its structure is one-atom-thick planar sheets of sp and sp2-bonded carbon atoms arranged in crystal lattice. It can be seen as a lattice of benzene rings connected by acetylene bonds. The material is called graphyne-n when benzene rings are connected by n sequential acetylene molecules, and graphdiyne for a particular case of n = 2.

<span class="mw-page-title-main">Timothy M. Swager</span> American Chemist and Materials Scientist

Timothy M. Swager is an American Scientist and the John D. MacArthur Professor of Chemistry at the Massachusetts Institute of Technology. His research is at the interface of chemistry and materials science, with specific interests in carbon nanomaterials, polymers, and liquid crystals. He is an elected member of the National Academy of Sciences, American Academy of Arts and Sciences, and the National Academy of Inventors.

Niveen M. Khashab is a Lebanese chemist and an associate Professor of chemical Sciences and engineering at King Abdullah University of Science and Technology in Saudi Arabia since 2009. She is a laureate of the 2017 L'Oréal-UNESCO Awards for Women in Science "for her contributions to innovative smart hybrid materials aimed at drug delivery and for developing new techniques to monitor intracellular antioxidant activity." She is also a fellow of the Royal Chemical Society, and a member of the American Chemical Society.

<span class="mw-page-title-main">Cycloparaphenylene</span>

A cycloparaphenylene is a molecule that consists of several benzene rings connected by covalent bonds in the para positions to form a hoop- or necklace-like structure. Its chemical formula is [C6H4]n or C
6n
H
4n
Such a molecule is usually denoted [n]CPP where n is the number of benzene rings.

Julia A. Kovacs is an American chemist specializing in bioinorganic chemistry. She is professor of chemistry at the University of Washington. Her research involves synthesizing small-molecule mimics of the active sites of metalloproteins, in order to investigate how cysteinates influence the function of non-heme iron enzymes, and the mechanism of the oxygen-evolving complex (OEC).

<span class="mw-page-title-main">Topochemical polymerization</span>

Topochemical polymerization is a polymerization method performed by monomers aligned in the crystal state. In this process, the monomers are crystallised and polymerised under external stimuli such as heat, light, or pressure. Compared to traditional polymerisation, the movement of monomers was confined by the crystal lattice in topochemical polymerisation, giving rise to polymers with high crystallinity, tacticity, and purity. Topochemical polymerisation can also be used to synthesise unique polymers such as polydiacetylene that are otherwise hard to prepare.

Rebekka Klausen is an American chemist who is the Second Decade Society Associate Professor at Johns Hopkins University. Her research considers carbon and silicon-based nanomaterials for optoelectronic devices. She was a finalist for the 2021 Blavatnik Awards for Young Scientists.

References

  1. Huang, Haw-Tyng; Zhu, Li; Ward, Matthew D.; Wang, Tao; Chen, Bo; Chaloux, Brian L.; Wang, Qianqian; Biswas, Arani; Gray, Jennifer L.; Kuei, Brooke; Cody, George D.; Epshteyn, Albert; Crespi, Vincent H.; Badding, John V.; Strobel, Timothy A. (21 January 2020). "Nanoarchitecture through Strained Molecules: Cubane-Derived Scaffolds and the Smallest Carbon Nanothreads". Journal of the American Chemical Society. 142 (42): 17944–17955. doi:10.1021/jacs.9b12352. ISSN   0002-7863. PMID   31961671. S2CID   210870993.
  2. 1 2 3 4 5 6 7 8 T.C.Fitzgibbons et al., Benzene-derived carbon nanothreads, Nature Materials, September 21, 2014
  3. 1 2 3 4 5 6 7 8 9 10 11 Li, Xiang; Baldini, Maria; Wang, Tao; Chen, Bo; Xu, En-shi; Vermilyea, Brian; Crespi, Vincent H.; Hoffmann, Roald; Molaison, Jamie J. (2017-11-15). "Mechanochemical Synthesis of Carbon Nanothread Single Crystals". Journal of the American Chemical Society. 139 (45): 16343–16349. doi:10.1021/jacs.7b09311. ISSN   0002-7863. PMID   29040804.
  4. Scientists Might Have Accidentally Solved The Hardest Part Of Building Space Elevators, Business Insider, 13 October 2014, Ajai Raj
  5. 1 2 Chen, Bo; Hoffmann, Roald; Ashcroft, N. W.; Badding, John; Xu, Enshi; Crespi, Vincent (2015-11-18). "Linearly Polymerized Benzene Arrays As Intermediates, Tracing Pathways to Carbon Nanothreads". Journal of the American Chemical Society. 137 (45): 14373–14386. doi:10.1021/jacs.5b09053. ISSN   0002-7863. PMID   26488180.
  6. Huang, Haw-Tyng; Zhu, Li; Ward, Matthew D.; Wang, Tao; Chen, Bo; Chaloux, Brian L.; Wang, Qianqian; Biswas, Arani; Gray, Jennifer L.; Kuei, Brooke; Cody, George D.; Epshteyn, Albert; Crespi, Vincent H.; Badding, John V.; Strobel, Timothy A. (21 January 2020). "Nanoarchitecture through Strained Molecules: Cubane-Derived Scaffolds and the Smallest Carbon Nanothreads". Journal of the American Chemical Society. 142 (42): 17944–17955. doi:10.1021/jacs.9b12352. ISSN   0002-7863. PMID   31961671. S2CID   210870993.
  7. Lauher, Joseph W.; Fowler, Frank W.; Goroff, Nancy S. (2008-09-16). "Single-Crystal-to-Single-Crystal Topochemical Polymerizations by Design". Accounts of Chemical Research. 41 (9): 1215–1229. doi:10.1021/ar8001427. ISSN   0001-4842. PMID   18712885.
  8. Chen, Bo; Hoffmann, Roald; Cammi, Roberto (2017-09-04). "The Effect of Pressure on Organic Reactions in Fluids—a New Theoretical Perspective". Angewandte Chemie International Edition. 56 (37): 11126–11142. doi: 10.1002/anie.201705427 . ISSN   1521-3773. PMID   28738450.
  9. Olbrich, Martin; Mayer, Peter; Trauner, Dirk (2015-02-20). "Synthetic Studies toward Polytwistane Hydrocarbon Nanorods". The Journal of Organic Chemistry. 80 (4): 2042–2055. doi:10.1021/jo502618g. ISSN   0022-3263. PMID   25511971.
  10. 1 2 Barua, Shiblee R.; Quanz, Henrik; Olbrich, Martin; Schreiner, Peter R.; Trauner, Dirk; Allen, Wesley D. (2014-02-03). "Polytwistane". Chemistry – A European Journal. 20 (6): 1638–1645. doi:10.1002/chem.201303081. ISSN   1521-3765. PMID   24402729.
  11. 1 2 3 Xu, En-shi; Lammert, Paul E.; Crespi, Vincent H. (2015-08-12). "Systematic Enumeration of sp3 Nanothreads". Nano Letters. 15 (8): 5124–5130. Bibcode:2015NanoL..15.5124X. doi:10.1021/acs.nanolett.5b01343. ISSN   1530-6984. PMID   26207926.
  12. 1 2 Stojkovic, Dragan (2001). "Smallest Nanotube: Breaking the Symmetry of". Physical Review Letters. 87 (12): 125502. Bibcode:2001PhRvL..87l5502S. doi:10.1103/physrevlett.87.125502. PMID   11580519.
  13. 1 2 Wen, Xiao-Dong; Hoffmann, Roald; Ashcroft, N. W. (2011-06-15). "Benzene under High Pressure: a Story of Molecular Crystals Transforming to Saturated Networks, with a Possible Intermediate Metallic Phase". Journal of the American Chemical Society. 133 (23): 9023–9035. doi:10.1021/ja201786y. ISSN   0002-7863. PMID   21524117.
  14. Ciabini, Lucia; Santoro, Mario; Gorelli, Federico A.; Bini, Roberto; Schettino, Vincenzo; Raugei, Simone (2007). "Triggering dynamics of the high-pressure benzene amorphization". Nature Materials. 6 (1): 39–43. Bibcode:2007NatMa...6...39C. doi:10.1038/nmat1803. ISSN   1476-4660. PMID   17160003.
  15. Badding, John V.; Crespi, Vincent H. (2015). "Synthesizing carbon nanothreads from benzene". SPIE Newsroom. doi:10.1117/2.1201501.005713.
  16. Juhl, Stephen J.; Wang, Tao; Vermilyea, Brian; Li, Xiang; Crespi, Vincent H.; Badding, John V.; Alem, Nasim (2019-04-05). "Local Structure and Bonding of Carbon Nanothreads Probed by High-Resolution Transmission Electron Microscopy" (PDF). Journal of the American Chemical Society. 141 (17): 6937–6945. doi:10.1021/jacs.8b13405. ISSN   0002-7863. PMID   30951295. S2CID   96449645.
  17. Duan, Pu; Li, Xiang; Wang, Tao; Chen, Bo; Juhl, Stephen J.; Koeplinger, Daniel; Crespi, Vincent H.; Badding, John V.; Schmidt-Rohr, Klaus (2018-05-29). "The Chemical Structure of Carbon Nanothreads Analyzed by Advanced Solid-State NMR". Journal of the American Chemical Society. 140 (24): 7658–7666. doi:10.1021/jacs.8b03733. ISSN   0002-7863. PMID   29808673. S2CID   207190929.
  18. 1 2 3 Demingos, P. G.; Muniz, A. R. (2018). "Electronic and mechanical properties of partially saturated carbon and carbon nitride nanothreads". Journal of Physical Chemistry C. 123 (6): 3886–3891. doi:10.1021/acs.jpcc.8b11329. S2CID   104424307.
  19. Li, Xiang; Wang, Tao; Duan, Pu; Baldini, Maria; Huang, Haw-Tyng; Chen, Bo; Juhl, Stephen J.; Koeplinger, Daniel; Crespi, Vincent H. (2018-03-23). "Carbon Nitride Nanothread Crystals Derived from Pyridine". Journal of the American Chemical Society. 140 (15): 4969–4972. doi:10.1021/jacs.7b13247. ISSN   0002-7863. PMID   29569919.
  20. 1 2 Silveira, J. F. R. V.; Muniz, A. R. (2017). "Functionalized diamond nanothreads from benzene derivatives". Physical Chemistry Chemical Physics. 19 (10): 7132–7137. Bibcode:2017PCCP...19.7132S. doi:10.1039/c6cp08655a. ISSN   1463-9084. PMID   28229141.
  21. Demingos, P. G.; Muniz, A. R. (2019). "Carbon nanothreads from polycyclic aromatic hydrocarbon molecules". Carbon. 140: 644–652. doi:10.1016/j.carbon.2018.09.022. S2CID   105107235.
  22. Marutheeswaran, S.; Jemmis, Eluvathingal D. (15 March 2018). "Adamantane-Derived Carbon Nanothreads: High Structural Stability and Mechanical Strength". The Journal of Physical Chemistry C. 122 (14): 7945–7950. doi:10.1021/acs.jpcc.7b12603. ISSN   1932-7447.
  23. Huang, Haw-Tyng; Zhu, Li; Ward, Matthew D.; Wang, Tao; Chen, Bo; Chaloux, Brian L.; Wang, Qianqian; Biswas, Arani; Gray, Jennifer L.; Kuei, Brooke; Cody, George D.; Epshteyn, Albert; Crespi, Vincent H.; Badding, John V.; Strobel, Timothy A. (10 February 2020). "Nanoarchitecture through Strained Molecules: Cubane-Derived Scaffolds and the Smallest Carbon Nanothreads". Journal of the American Chemical Society. 142 (42): 17944–17955. doi:10.1021/jacs.9b12352. PMID   31961671. S2CID   210870993.
  24. Carpineti, Alfredo (November 28, 2015). "Super-Strong Diamond Nanothread Has People Dreaming Of A Space Elevator". IFLScience. Retrieved 2015-11-29.
  25. 1 2 3 4 Roman, R. Kwan, K., and Cranford, S.W., Mechanical Properties and Defect Sensitivity of Diamond Nanothreads, Nano Letters, Feb. 18, 2015, 15 (3), pp 1585–1590
  26. Saha, Biswajit; Pratik, Saied Md.; Datta, Ayan (2017-09-18). "Coexistence of Normal and Auxetic Behavior in a Thermally and Chemically Stable sp3 Nanothread: Poly[5]asterane". Chemistry – A European Journal. 23 (52): 12917–12923. doi:10.1002/chem.201702775. ISSN   1521-3765. PMID   28683158.
  27. Zhan, Haifei; Gu, Yuantong (2017). Thermal Transport in Carbon-Based Nanomaterials. pp. 185–204. arXiv: 1803.06435 . doi:10.1016/b978-0-32-346240-2.00007-8. ISBN   9780323462402. S2CID   4946467.
  28. Zhan, Haifei; Zhang, Gang; Zhang, Yingyan; Tan, V.B.C.; Bell, John M.; Gu, Yuantong (2016). "Thermal conductivity of a new carbon nanotube analog: The diamond nanothread" (PDF). Carbon. 98: 232–237. doi:10.1016/j.carbon.2015.11.012. S2CID   55959962.
  29. Zhu, Taishan; Ertekin, Elif (2016-04-11). "Generalized Debye-Peierls/Allen-Feldman model for the lattice thermal conductivity of low-dimensional and disordered materials". Physical Review B. 93 (15): 155414. arXiv: 1602.02419 . Bibcode:2016PhRvB..93o5414Z. doi:10.1103/PhysRevB.93.155414. S2CID   119287470.
  30. Wu, Weikang; Tai, Bo; Guan, Shan; Yang, Shengyuan A.; Zhang, Gang (2018-02-08). "Hybrid Structures and Strain-Tunable Electronic Properties of Carbon Nanothreads". The Journal of Physical Chemistry C. 122 (5): 3101–3106. arXiv: 1803.04694 . doi:10.1021/acs.jpcc.7b11549. ISSN   1932-7447. S2CID   54707528.
  31. Gryn’ova, Ganna; Corminboeuf, Clémence (2019-02-21). "Topology-Driven Single-Molecule Conductance of Carbon Nanothreads". The Journal of Physical Chemistry Letters. 10 (4): 825–830. doi:10.1021/acs.jpclett.8b03556. ISSN   1948-7185. PMID   30668127. S2CID   58949557.
  32. Zhan, Haifei; Zhang, Gang; Tan, Vincent B. C.; Cheng, Yuan; Bell, John M.; Zhang, Yong-Wei; Gu, Yuantong (2016-05-26). "From brittle to ductile: a structure dependent ductility of diamond nanothread". Nanoscale. 8 (21): 11177–11184. arXiv: 1511.01583 . Bibcode:2016Nanos...811177Z. doi:10.1039/c6nr02414a. ISSN   2040-3372. PMID   27181833. S2CID   18849867.
  33. Zhan, Haifei; Zhang, Gang; Tan, Vincent B. C.; Gu, Yuantong (2017-03-17). "The best features of diamond nanothread for nanofibre applications". Nature Communications. 8: 14863. arXiv: 1709.08326 . Bibcode:2017NatCo...814863Z. doi:10.1038/ncomms14863. ISSN   2041-1723. PMC   5357841 . PMID   28303887.
  34. Corminboeuf, Clémence; Gryn'ova, Ganna (2019-01-22). "Topology-Driven Single-Molecule Conductance of Carbon Nanothreads". The Journal of Physical Chemistry Letters. 10 (4): 825–830. doi:10.1021/acs.jpclett.8b03556. ISSN   1948-7185. PMID   30668127. S2CID   58949557.
  35. Hong, Guosong; Diao, Shuo; Antaris, Alexander L.; Dai, Hongjie (2015-10-14). "Carbon Nanomaterials for Biological Imaging and Nanomedicinal Therapy". Chemical Reviews. 115 (19): 10816–10906. doi:10.1021/acs.chemrev.5b00008. ISSN   0009-2665. PMID   25997028.
  36. Duan, Ke; Li, Yijun; Li, Li; Hu, Yujin; Wang, Xuelin (2018-05-03). "Diamond nanothreads based resonators: ultrahigh sensitivity and low dissipation". Nanoscale. 10 (17): 8058–8065. doi:10.1039/C8NR00502H. ISSN   2040-3372. PMID   29671436.
  37. Zhan, Haifei; Zhang, Gang; Bell, John M.; Tan, Vincent B. C.; Gu, Yuantong (2020). "High density mechanical energy storage with carbon nanothread bundle". Nature Communications. 11 (1): 1905. doi:10.1038/s41467-020-15807-7. PMC   7171126 . PMID   32312980.