Fieseler Fi 97 | |
---|---|
Role | Touring aircraft |
Manufacturer | Fieseler |
First flight | 1934 |
Introduction | 1934 |
Primary user | Germany |
Produced | 1934 |
Number built | 5 |
The Fieseler Fi 97 was a 1930s German four-seat cabin touring and competition monoplane aircraft designed and built by the German manufacturer Fieseler.
Following the success of their two-seat tourer/trainer the Fieseler F5, Fieseler was encouraged by the German Reichsluftfahrtministerium (RLM) to develop a four-seat version specially to take part in the European touring plane championship Challenge 1934.
The result of this request was the Fi 97, designed by Kurt Arnolt. It was a mixed-construction low-wing cantilever monoplane with a conventional tail unit. The fuselage had a fabric-covered steel tubing frame. The wing structure was wood and was covered with fabric and plywood. The wings were able to be folded aft for storage or ground transport. The tailskid undercarriage was fixed. The pilot and three passengers had an enclosed cabin.
Five examples of the Fi 97 were built. Three aircraft were fitted with the Hirth HM 8U, 250 hp inverted V8 engine, and two used the Argus As 17A, 225 hp inverted 6-cylinder inline engine. Both engines are air-cooled.
The plane had STOL capabilities and the most significant design aspect was the wing's high-lift devices to enable the aircraft to be flown at low speeds. The leading-edge had Handley Page type automatic slats over more than half of the span. The trailing edge had Fieseler-designed Ausrollflügel, a Fowler-type trailing-edge flap. The trailing-edge flap increased the wing area by nearly 20%. These high-lift features allowed the aircraft to be controlled down to 58 km/h (36 mph). These features were later utilized in construction of the famous Fieseler Fi 156 Storch.
Five Fi 97s took part in the Challenge 1934 touring plane championship in August–September, and Hans Seidemann took third place in an Argus-powered Fi 97, bested by only two Polish RWD-9s. A significant achievement was that all the Fieselers completed the contest (places: 3, 9, 12, 13, 16), especially comparing to other German aircraft. Among pilots was also Wolf Hirth. Among others, they scored 1st and 3rd results in a short landing trial (best result - 75 m, from over 8 m-high gate) and very good results in a short take-off (78.3 m over 8 m-high gate) and minimal speed trial (58.49 km/h).
Data from The Illustrated Encyclopedia of Aircraft (Part Work 1982–1985), 1985, Orbis Publishing, Page 1812/3
General characteristics
Performance
Aircraft of comparable role, configuration, and era
The Fieseler Fi 5 was a single-engined two-seat sportplane of the 1930s. It was produced by the German aircraft manufacturer Fieseler Flugzeugbau, which was started by the World War I fighter ace and German aerobatic star, Gerhard Fieseler.
The Aero A.200 was a sportsplane of Czechoslovakia, designed and built specifically to compete in Challenge 1934, the European touring plane championships. It was a four-seater low-wing monoplane.
The Messerschmitt Bf 163 was an STOL aircraft designed by BFW and built by Weser Flugzeugbau before World War II.
The Kokusai Ki-76, or Liaison Aircraft Type 3, was a Japanese high-wing monoplane artillery spotter and liaison aircraft that served in World War II. The Allied reporting name was "Stella".
The LIBIS KB-6 Matajur was a 1950s Slovenian two-seat light monoplane designed and produced by LIBIS aircraft during Yugoslavian period.
The Fairchild 22 Model C7 was an American two-seat touring or training monoplane designed and built by the Kreider-Reisner division of the Fairchild Aircraft Corporation at Hagerstown, Maryland.
The Nardi FN.315 was an Italian training monoplane developed from the earlier Nardi FN.305 and produced by the Fratelli Nardi company.
The Klemm Kl 36 is a 1930s German four-seat cabin touring and competition monoplane. It was designed by Klemm and Friedrich Fechner and built by Klemm.
The Heinkel He 64 was a sports plane designed by the German aeronautical engineers Siegfried and Walter Günter and produced by the aircraft manufacturer Heinkel. It was specifically built to participate in the touring plane championships of 1933.
The Nord 1221 Norélan was a 1940s three-seat training monoplane designed and built in France by Nord Aviation.
The Henschel Hs 121 was the first aircraft built by the German Henschel company. It was a high-wing monoplane with an inline engine, fixed undercarriage and single, open cockpit, designed as an advanced trainer. Only one aircraft was produced, in 1933–4, as a testpiece for the Air Ministry.
The Fieseler Fi 158 was a civilian research aircraft designed and built in Germany from 1938.
The Brown B-3 was a 1930s American single-seat touring monoplane and air racer built by the Lawrence Brown Aircraft Company. Only one aircraft was built.
The Ikarus Kurir is a single-engined high-wing monoplane designed in Yugoslavia for army liaison and air ambulance work from small airfields. Built in large numbers, it served with the Yugoslav Air Force (JRV) until 1972, when it entered civilian use.
The Comte AC-12 Moskito was a 1930s Swiss three-seat light touring cabin monoplane produced by Flugzeugbau A. Comte.
The IAR-22 was a single engine basic trainer built in Romania in about 1934. It was a low-wing monoplane with two seats in tandem and a fixed conventional undercarriage.
The Heinkel He 71 was a German single-seat monoplane, a smaller version of the two-seat Heinkel He 64. A low-wing monoplane with a fixed conventional landing gear, the prototype first flew with an open cockpit and a 60 hp (45 kW) Hirth HM 60 engine. It was later modified with an enclosed cabin and a 78 hp (58 kW) Hirth HM 4 engine. With additional fuel tanks to increase range it was used by German aviator Elly Beinhorn on a flight around Africa.
The Darmstadt D-29 was a German experimental monoplane designed and built by Akaflieg Darmstadt. The D-29 was a cantilever low-wing monoplane designed and built during 1936 with a conventional landing gear with a tailskid. It was powered by a Siemens-Halske Sh 14a radial piston engine and had enclosed tandem cockpits, as well as a number of other features, including hydraulically actuated trailing-edge flaps, a braced T-tail and leading-edge slots.
The Sud-Est or SNCASE SE-2100, sometimes known as the Satre SE-2100 after its designer, was a tailless, pusher configuration touring monoplane with a single engine and cabin for two. Only one was built.
The Raab-Katzenstein RK.25 was a two-seat, low wing cantilever monoplane aircraft designed and built in Germany in the 1920s for fast touring. Three were built and one had some success in a 1928 international contest. Another was later re-engined and provided with cabin accommodation.