Ophiolite

Last updated
Ordovician ophiolite in Gros Morne National Park, Newfoundland Gros Morne moho.jpg
Ordovician ophiolite in Gros Morne National Park, Newfoundland
Chromitic serpentinite, Bay of Islands Ophiolite, Lewis Hills, Newfoundland Chromitic serpentinite (Little Port Complex, Bay of Islands Ophiolite, Middle Cambrian, 505 Ma; Springer's Hill outcrop, Lewis Hills, Newfoundland) 4.jpg
Chromitic serpentinite, Bay of Islands Ophiolite, Lewis Hills, Newfoundland

An ophiolite is a section of Earth's oceanic crust and the underlying upper mantle that has been uplifted and exposed, and often emplaced onto continental crustal rocks.

Contents

The Greek word ὄφις, ophis (snake) is found in the name of ophiolites, because of the superficial texture of some of them. Serpentinite especially evokes a snakeskin. (The suffix -lite is from the Greek lithos, meaning "stone".) Some ophiolites have a green color. The origin of these rocks, present in many mountainous massifs, remained uncertain until the advent of plate tectonic theory.

Their great significance relates to their occurrence within mountain belts such as the Alps and the Himalayas, where they document the existence of former ocean basins that have now been consumed by subduction. This insight was one of the founding pillars of plate tectonics, and ophiolites have always played a central role in plate tectonic theory and the interpretation of ancient mountain belts.

Pseudostratigraphy and definition

Stratigraphic sequence of an ophiolite. Ofiolite sequence EN.svg
Stratigraphic sequence of an ophiolite.
A simplified structure of an ophiolite suite:
axial magma chamber
pelagic sediments
pillow basalts
sheeted basaltic dykes
intrusive, layered gabbro
dunite/peridotite cumulates Ophiolite suite scheme.jpg
A simplified structure of an ophiolite suite:
  1. axial magma chamber
  2. pelagic sediments
  3. pillow basalts
  4. sheeted basaltic dykes
  5. intrusive, layered gabbro
  6. dunite/peridotite cumulates

The stratigraphic-like sequence observed in ophiolites corresponds to the lithosphere-forming processes at mid-oceanic ridges. From top to bottom, the layers in the sequence are:

A Geological Society of America Penrose Conference on ophiolites in 1972 defined the term "ophiolite" to include all of the layers listed above, including the sediment layer formed independently of the rest of the ophiolite. [1] This definition has been challenged recently because new studies of oceanic crust by the Integrated Ocean Drilling Program and other research cruises have shown that in situ ocean crust can be quite variable in thickness and composition, and that in places sheeted dikes sit directly on peridotite tectonite, with no intervening gabbros.

Formation and emplacement

Ophiolites have been identified in most of the world's orogenic belts. [2] However, two components of ophiolite formation are under debate: the origin of the sequence and the mechanism for ophiolite emplacement. Emplacement is the process of the sequence's uplift over lower density continental crust. [3]

Origin

Several studies support the conclusion that ophiolites formed as oceanic lithosphere. Seismic velocity structure studies have provided most of the current knowledge of the oceanic crust's composition. For this reason, researchers carried out a seismic study on an ophiolite complex (Bay of Islands, Newfoundland) in order to establish a comparison. The study concluded that oceanic and ophiolitic velocity structures were identical, pointing to the origin of ophiolite complexes as oceanic crust. [4] The observations that follow support this conclusion. Rocks originating on the seafloor show chemical composition comparable to unaltered ophiolite layers, from primary composition elements such as silicon and titanium to trace elements. Seafloor and ophiolitic rocks share a low occurrence of silica-rich minerals; those present have a high sodium and low potassium content. [5] The temperature gradients of the metamorphosis of ophiolitic pillow lavas and dykes are similar to those found beneath ocean ridges today. [5] Evidence from the metal-ore deposits present in and near ophiolites and from oxygen and hydrogen isotopes suggests that the passage of seawater through hot basalt in the vicinity of ridges dissolved and carried elements that precipitated as sulfides when the heated seawater came into contact with cold seawater. The same phenomenon occurs near oceanic ridges in a formation known as hydrothermal vents. [5] The final line of evidence supporting the origin of ophiolites as seafloor is the region of formation of the sediments over the pillow lavas: they were deposited in water over 2 km deep, far removed from land-sourced sediments. [5] Despite the above observations, there are inconsistencies in the theory of ophiolites as oceanic crust, which suggests that newly generated ocean crust follows the full Wilson cycle before emplacement as an ophiolite. This requires ophiolites to be much older than the orogenies on which they lie, and therefore old and cold. However, radiometric and stratigraphic dating has found ophiolites to have undergone emplacement when young and hot: [5] most are less than 50 million years old. [6] Ophiolites therefore cannot have followed the full Wilson cycle and are considered atypical ocean crust.

Ophiolite emplacement

There is yet no consensus on the mechanics of emplacement, the process by which oceanic crust is uplifted onto continental margins despite the relatively low density of the latter. All emplacement procedures share the same steps nonetheless: subduction initiation, thrusting of the ophiolite over a continental margin or an overriding plate at a subduction zone, and contact with air. [7]

Hypotheses

Emplacement by irregular continental margin

A hypothesis based on research conducted on the Bay of Islands complex in Newfoundland as well as the East Vardar complex in the Apuseni Mountains of Romania [8] suggest that an irregular continental margin colliding with an island arc complex causes ophiolite generation in a back-arc basin and obduction due to compression. [9] The continental margin, promontories and reentrants along its length, is attached to the subducting oceanic crust, which dips away from it underneath the island arc complex. As subduction takes place, the buoyant continent and island arc complex converge, initially colliding with the promontories. However, oceanic crust is still at the surface between the promontories, not having been subducted beneath the island arc yet. The subducting oceanic crust is thought to split from the continental margin to aid subduction. In the event that the rate of trench retreat is greater than that of the island arc complex's progression, trench rollback will take place, and by consequence, extension of the overriding plate will occur to allow the island arc complex to match the trench retreat's speed. The extension, a back-arc basin, generates oceanic crust: ophiolites. Finally, when the oceanic lithosphere is entirely subducted, the island arc complex's extensional regime becomes compressional. The hot, positively buoyant ocean crust from the extension will not subduct, instead obducting onto the island arc as an ophiolite. As compression persists, the ophiolite is emplaced onto the continental margin. [9] Based on Sr and Nd isotope analyses, ophiolites have a similar composition to mid-ocean-ridge basalts, but typically have slightly elevated large ion lithophile elements and a Nb depletion. These chemical signatures support the ophiolites having formed in a back-arc basin of a subduction zone.

As trapped forearc

Ophiolite generation and subduction may also be explained, as suggested from evidence from the Coast Range ophiolite of California and Baja California, by a change in subduction location and polarity. [10] Oceanic crust attached to a continental margin subducts beneath an island arc. Pre-ophiolitic ocean crust is generated by a back-arc basin. The collision of the continent and island arc initiates a new subduction zone at the back-arc basin, dipping in the opposite direction as the first. The created ophiolite becomes the tip of the new subduction's forearc and is uplifted (over the accretionary wedge) by detachment and compression. [10] Verification of the two above hypotheses requires further research, as do the other hypotheses available in current literature on the subject.

Research

Scientists have drilled only about 1.5 km into the 6- to 7-kilometer-thick oceanic crust, so scientific understanding of oceanic crust comes largely from comparing ophiolite structure to seismic soundings of in situ oceanic crust. Oceanic crust generally has a layered velocity structure that implies a layered rock series similar to that listed above. But in detail there are problems, with many ophiolites exhibiting thinner accumulations of igneous rock than are inferred for oceanic crust. Another problem relating to oceanic crust and ophiolites is that the thick gabbro layer of ophiolites calls for large magma chambers beneath mid-ocean ridges. However, seismic sounding of mid-ocean ridges has revealed only a few magma chambers beneath ridges, and these are quite thin. A few deep drill holes into oceanic crust have intercepted gabbro, but it is not layered like ophiolite gabbro.[ citation needed ]

The circulation of hydrothermal fluids through young oceanic crust causes serpentinization, alteration of the peridotites and alteration of minerals in the gabbros and basalts to lower temperature assemblages. For example, plagioclase, pyroxenes, and olivine in the sheeted dikes and lavas will alter to albite, chlorite, and serpentine, respectively. Often, ore bodies such as iron-rich sulfide deposits are found above highly altered epidosites (epidote-quartz rocks) that are evidence of relict black smokers, which continue to operate within the seafloor spreading centers of ocean ridges today.[ citation needed ]

Thus, there is reason to believe that ophiolites are indeed oceanic mantle and crust; however, certain problems arise when looking closer. Beyond issues of layer thicknesses mentioned above, a problem arises concerning compositional differences of silica (SiO2) and titania (TiO2). Ophiolite basalt contents place them in the domain of subduction zones (~55% silica, <1% TiO2), whereas mid-ocean ridge basalts typically have ~50% silica and 1.5–2.5% TiO2. These chemical differences extend to a range of trace elements as well (that is, chemical elements occurring in amounts of 1000  ppm or less). In particular, trace elements associated with subduction zone (island arc) volcanics tend to be high in ophiolites, whereas trace elements that are high in ocean ridge basalts but low in subduction zone volcanics are also low in ophiolites. [11]

Additionally, the crystallization order of feldspar and pyroxene (clino- and orthopyroxene) in the gabbros is reversed, and ophiolites also appear to have a multi-phase magmatic complexity on par with subduction zones. Indeed, there is increasing evidence that most ophiolites are generated when subduction begins and thus represent fragments of fore-arc lithosphere. This led to introduction of the term "supra-subduction zone" (SSZ) ophiolite in the 1980s to acknowledge that some ophiolites are more closely related to island arcs than ocean ridges. Consequently, some of the classic ophiolite occurrences thought of as being related to seafloor spreading (Troodos in Cyprus, Semail in Oman) were found to be "SSZ" ophiolites, formed by rapid extension of fore-arc crust during subduction initiation. [12]

A fore-arc setting for most ophiolites also solves the otherwise-perplexing problem of how oceanic lithosphere can be emplaced on top of continental crust. It appears that continental accretion sediments, if carried by the downgoing plate into a subduction zone, will jam it up and cause subduction to cease, resulting in the rebound of the accretionary prism with fore-arc lithosphere (ophiolite) on top of it. Ophiolites with compositions comparable with hotspot-type eruptive settings or normal mid-oceanic ridge basalt are rare, and those examples are generally strongly dismembered in subduction zone accretionary complexes.[ citation needed ]

Groups and assemblages

Classic ophiolite assemblage in Cyprus showing sheeted lava intersected by a dyke with pillow lava on top. Geology of Cyprus-Ophiolite Sheeted dyke complex.jpg
Classic ophiolite assemblage in Cyprus showing sheeted lava intersected by a dyke with pillow lava on top.

Ophiolites are common in orogenic belts of Mesozoic age, like those formed by the closure of the Tethys Ocean. Ophiolites in Archean and Paleoproterozoic domains are rare. [13]

Most ophiolites can be divided into one of two groups: Tethyan and Cordilleran. Tethyan ophiolites are characteristic of those that occur in the eastern Mediterranean sea area, e.g. Troodos in Cyprus, and in the Middle East, such as Semail in Oman, which consist of relatively complete rock series corresponding to the classic ophiolite assemblage and which have been emplaced onto a passive continental margin more or less intact (Tethys is the name given to the ancient sea that once separated Europe and Africa). Cordilleran ophiolites are characteristic of those that occur in the mountain belts of western North America (the "Cordillera" or backbone of the continent). These ophiolites sit on subduction zone accretionary complexes (subduction complexes) and have no association with a passive continental margin. They include the Coast Range ophiolite of California, the Josephine ophiolite of the Klamath Mountains (California, Oregon), and ophiolites in the southern Andes of South America. Despite their differences in mode of emplacement, both types of ophiolite are exclusively supra-subduction zone (SSZ) in origin. [14]

Based on mode of occurrences, the Neoproterozoic ophiolites appear to show characteristics of both mid-oceanic ridge basalt (MORB)-type and SSZ-type ophiolites and are classified from oldest to youngest into: (1) MORB intact ophiolites (MIO); (2) dismembered ophiolites (DO); and (3) arc-associated ophiolites (AAO) (El Bahariya, 2018). Collectively, the investigated ophiolites of the Central Eastern Desert (CED) fall into both MORB/back-arc basin basalt (BABB) ophiolites and SSZ ophiolites. They are spatially and temporally unrelated, and thus, it seems likely that the two types are not petrogenetically related. Ophiolites occur in different geological settings, and they represent change of the tectonic setting of the ophiolites from MORB to SSZ with time.

Origin and evolution of the concept

The term ophiolite originated from publications of Alexandre Brongniart in 1813 and 1821. In the first, he used ophiolite for serpentinite rocks found in large-scale breccias called mélanges. [15] [16] In the second publication, he expanded the definition to encompass a variety of igneous rocks as well such as gabbro, diabase, ultramafic and volcanic rocks. [16] Ophiolites thus became a name for a well-known association of rocks occurring in the Alps and Apennines of Italy. [16] Following work in these two mountains systems, Gustav Steinmann defined what later became known as the "Steinmann Trinity": the mixture of serpentine, diabase-spilite and chert. [16] The recognition of the Steinmann Trinity served years later to build up the theory around seafloor spreading and plate tectonics. [17] A key observation by Steinmann was that ophiolites were associated to sedimentary rocks reflecting former deep sea environments. [16] Steinmann himself interpreted ophiolites (the Trinity) using the geosyncline concept. [18] He held that Alpine ophiolites were "submarine effusions issuing along thrust faults into the active flank of an asymmetrically shortening geosyncline". [19] The apparent lack of ophiolites in the Peruvian Andes, Steinmann theorized, was either due to the Andes being preceded by a shallow geosyncline or representing just the margin of a geosyncline. [18] Thus, Cordilleran-type and Alpine-type mountains were to be different in this regard. [18] In Hans Stille's models a type of geosyncline called eugeosynclines were characterized by producing an "initial magmatism" that in some cases corresponded to ophiolitic magmatism. [18]

As plate tectonic theory prevailed in geology [1] and geosyncline theory became outdated [20] ophiolites were interpreted in the new framework. [1] They were recognized as fragments of oceanic lithosphere, and dykes were viewed as the result of extensional tectonics at mid-ocean ridges. [1] [21] The plutonic rocks found in ophiolites were understood as remnants of former magma chambers. [1]

In 1973, Akiho Miyashiro revolutionized common conceptions of ophiolites and proposed an island arc origin for the famous Troodos Ophiolite in Cyprus, arguing that numerous lavas and dykes in the ophiolite had calc-alkaline chemistries. [22]

Notable examples

A pillow lava from an ophiolite sequence, Northern Apennines, Italy ItalyPillowBasalt.jpg
A pillow lava from an ophiolite sequence, Northern Apennines, Italy

Examples of ophiolites that have been influential in the study of these rocks bodies are:

Notes

  1. 1 2 3 4 5 Dilek 2003 , p. 5
  2. Ben-Avraham, Z., (1982)
  3. Kearey, P., et al., (2009)
  4. Salisbury, M.H., and Christensen, N.I., (1978)
  5. 1 2 3 4 5 Mason, R., (1985)
  6. Moores, E.M., (1982)
  7. Wakabayashi, J. and Dilek, Y., (2003)
  8. Gallhofer, Daniela. Magmatic and tectonic history of Jurassic ophiolites and associated granitoids from the South Apuseni Mountains (Romania). OCLC   1188715024.
  9. 1 2 Cawood, P.A. and Suhr, G., (1992)
  10. 1 2 Wakabayashi, J. and Dilek, Y., (2000)
  11. Metcalf, R.V. and Shervais, J.W., (2008)
  12. Shervais, J.W., (2001), Metcalf, R.V. and Shervais, J.W., (2008)
  13. Peltonen, P. (2005). "Ophiolites". In Lehtinen, Martti; Nurmi, Pekka A. (eds.). Precambrian Geology of Finland . Elsevier Science. pp.  237–277. ISBN   9780080457598.
  14. e.g. Shervais, J.W., (2001)
  15. Brogniart, A. (1813)
  16. 1 2 3 4 5 Dilek 2003 , p. 1
  17. Seibold, Eugen; Seibold, Ilse (2010), "Gustav Steinmann (1856–1929): Ein deutscher Ordinarius der Kaiserzeit", International Journal of Earth Sciences (in German), 99 (Supplement 1): 3–15, Bibcode:2010IJEaS..99....3S, doi:10.1007/s00531-010-0561-y, S2CID   128688781
  18. 1 2 3 4 Şengör & Natal'in (2004), p. 682
  19. Şengör & Natal'in (2004), p. 681
  20. Şengör (1982), p. 44
  21. Dilek 2003 , p. 4
  22. Dilek 2003 , p. 6
  23. "Macquarie Island World Heritage values". World heritage places. Australian Government Department of the Environment. 24 April 2008. Archived from the original on 17 April 2012.
  24. Johnston, M. R. (2007). "Nineteenth-century observations of the Dun Mountain Ophiolite Belt, Nelson, New Zealand and trans-Tasman correlations". Geological Society, London, Special Publications. 287 (1): 375–387. Bibcode:2007GSLSP.287..375J. CiteSeerX   10.1.1.1007.8355 . doi:10.1144/sp287.27. S2CID   129776536.
  25. Rossman, D.L.; Castañada, G.C.; Bacuta, G.C. (1989). "Geology of the Zambales ophiolite, Luzon, Philippines". Tectonophysics. 168 (1): 1–22. Bibcode:1989Tectp.168....1R. doi:10.1016/0040-1951(89)90366-1.
  26. Encarnación, John P.; Mukasa, Samuel B.; Obille, Eligio C. (1993-11-10). "Zircon U-Pb geochronology of the Zambales and Angat Ophiolites, Luzon, Philippines: Evidence for an Eocene arc-back arc pair". Journal of Geophysical Research: Solid Earth. 98 (B11): 19991–20004. Bibcode:1993JGR....9819991E. doi:10.1029/93JB02167. ISSN   2156-2202.
  27. Encarnación, John (2004-11-08). "Multiple ophiolite generation preserved in the northern Philippines and the growth of an island arc complex". Tectonophysics. Continental Margins of the Pacific Rim. 392 (1–4): 103–130. Bibcode:2004Tectp.392..103E. doi:10.1016/j.tecto.2004.04.010.
  28. Acharyya, S.K.; Ray, K.K.; Sengupta, Subhasis (1991). "The Naga Hills and Andaman ophiolite belt, their setting, nature and collisional emplacement history". Physics and Chemistry of the Earth. 18: 293–315. Bibcode:1991PCE....18..293A. doi:10.1016/0079-1946(91)90006-2.

Related Research Articles

<span class="mw-page-title-main">Orogeny</span> The formation of mountain ranges

Orogeny is a mountain-building process that takes place at a convergent plate margin when plate motion compresses the margin. An orogenic belt or orogen develops as the compressed plate crumples and is uplifted to form one or more mountain ranges. This involves a series of geological processes collectively called orogenesis. These include both structural deformation of existing continental crust and the creation of new continental crust through volcanism. Magma rising in the orogen carries less dense material upwards while leaving more dense material behind, resulting in compositional differentiation of Earth's lithosphere. A synorogenic process or event is one that occurs during an orogeny.

<span class="mw-page-title-main">Subduction</span> A geological process at convergent tectonic plate boundaries where one plate moves under the other

Subduction is a geological process in which the oceanic lithosphere and some continental lithosphere is recycled into the Earth's mantle at the convergent boundaries between tectonic plates. Where one tectonic plate converges with a second plate, the heavier plate dives beneath the other and sinks into the mantle. A region where this process occurs is known as a subduction zone, and its surface expression is known as an arc-trench complex. The process of subduction has created most of the Earth's continental crust. Rates of subduction are typically measured in centimeters per year, with rates of convergence as high as 11 cm/year.

Obduction is a geological process whereby denser oceanic crust is scraped off a descending ocean plate at a convergent plate boundary and thrust on top of an adjacent plate. When oceanic and continental plates converge, normally the denser oceanic crust sinks under the continental crust in the process of subduction. Obduction, which is less common, normally occurs in plate collisions at orogenic belts or back-arc basins.

<span class="mw-page-title-main">Convergent boundary</span> Region of active deformation between colliding tectonic plates

A convergent boundary is an area on Earth where two or more lithospheric plates collide. One plate eventually slides beneath the other, a process known as subduction. The subduction zone can be defined by a plane where many earthquakes occur, called the Wadati–Benioff zone. These collisions happen on scales of millions to tens of millions of years and can lead to volcanism, earthquakes, orogenesis, destruction of lithosphere, and deformation. Convergent boundaries occur between oceanic-oceanic lithosphere, oceanic-continental lithosphere, and continental-continental lithosphere. The geologic features related to convergent boundaries vary depending on crust types.

<span class="mw-page-title-main">Oceanic crust</span> Uppermost layer of the oceanic portion of a tectonic plate

Oceanic crust is the uppermost layer of the oceanic portion of the tectonic plates. It is composed of the upper oceanic crust, with pillow lavas and a dike complex, and the lower oceanic crust, composed of troctolite, gabbro and ultramafic cumulates. The crust overlies the rigid uppermost layer of the mantle. The crust and the rigid upper mantle layer together constitute oceanic lithosphere.

<span class="mw-page-title-main">Geosyncline</span> Obsolete geological concept to explain orogens

A geosyncline is an obsolete geological concept to explain orogens, which was developed in the late 19th and early 20th centuries, before the theory of plate tectonics was envisaged. A geosyncline was described as a giant downward fold in the Earth's crust, with associated upward folds called geanticlines, that preceded the climax phase of orogenic deformation.

<span class="mw-page-title-main">Indus-Yarlung suture zone</span> Tectonic suture in southern Tibet

The Indus-Yarlung suture zone or the Indus-Yarlung Tsangpo suture is a tectonic suture in southern Tibet and across the north margin of the Himalayas which resulted from the collision between the Indian Plate and the Eurasian Plate starting about 52 Ma. The north side of the suture zone is the Ladakh Batholith of the Karakoram-Lhasa Block. The rocks of the suture zone consist of an ophiolite mélanges composed of Neotethys oceanic crustal flyschs and ophiolites; the Dras Volcanics: which are basalts, dacites and minor radiolarian cherts – the remains of a mid- to late Mesozoic volcanic island arc; and the Indus Molasse which are an Eocene or later continental clastic sediments.

<span class="mw-page-title-main">Lizard complex</span>

The Lizard complex, Cornwall is generally accepted to represent a preserved example of an exposed ophiolite complex in the United Kingdom. The rocks found in The Lizard area are analogous to those found in such famous areas as the Troodos Mountains, Cyprus and the Semail Ophiolite, Oman.

<span class="mw-page-title-main">Magmatism</span> Emplacement of magma on the outer layers of a terrestrial planet, which solidifies as igneous rocks

Magmatism is the emplacement of magma within and at the surface of the outer layers of a terrestrial planet, which solidifies as igneous rocks. It does so through magmatic activity or igneous activity, the production, intrusion and extrusion of magma or lava. Volcanism is the surface expression of magmatism.

<span class="mw-page-title-main">Sheeted dyke complex</span> Series of parallel dykes characteristic of oceanic crust

A sheeted dyke complex, or sheeted dike complex, is a series of sub-parallel intrusions of igneous rock, forming a layer within the oceanic crust. At mid-ocean ridges, dykes are formed when magma beneath areas of tectonic plate divergence travels through a fracture in the earlier formed oceanic crust, feeding the lavas above and cooling below the seafloor forming upright columns of igneous rock. Magma continues to cool, as the existing seafloor moves away from the area of divergence, and additional magma is intruded and cools. In some tectonic settings slices of the oceanic crust are obducted (emplaced) upon continental crust, forming an ophiolite.

<span class="mw-page-title-main">Molucca Sea plate</span> Small fully subducted tectonic plate near Indonesia

Located in the western Pacific Ocean near Indonesia, the Molucca Sea plate has been classified by scientists as a fully subducted microplate that is part of the Molucca Sea Collision Complex. The Molucca Sea plate represents the only known example of divergent double subduction (DDS), which describes the subduction on both sides of a single oceanic plate.

The Troodos Ophiolite on the island of Cyprus represents a Late Cretaceous spreading axis that has since been uplifted due to its positioning on the overriding Anatolian Plate at the Cyprus arc and ongoing subduction to the south of the Eratosthenes Seamount.

<span class="mw-page-title-main">High pressure metamorphic terranes along the Bangong-Nujiang Suture Zone</span> Geological features

High pressure terranes along the ~1200 km long east-west trending Bangong-Nujiang suture zone (BNS) on the Tibetan Plateau have been extensively mapped and studied. Understanding the geodynamic processes in which these terranes are created is key to understanding the development and subsequent deformation of the BNS and Eurasian deformation as a whole.

<span class="mw-page-title-main">Samail Ophiolite</span>

The Samail Ophiolite, also known as the Semail Ophiolite, is a large, ancient geological formation in Oman and the United Arab Emirates in the Arabian Peninsula. It is one of the world's largest and best-exposed segments of oceanic crust, made of volcanic rocks and ultramafic rocks from the Earth's upper mantle that was overthrust onto the continental crust. This ophiolite provides insight into the dynamics of oceanic crust formation and the tectonic processes involved in the creation of ocean basins.

Johann Heinrich Conrad Gottfried Gustav Steinmann was a German geologist and paleontologist. He performed various studies in the Ural Mountains, North America, South America, the Caucasus and the Alps. Steinmann had a large number of scientific publications. He made contributions to the Theory of Evolution and to the study of the structural geology and orogeny of the Andes.

An upper mantle body is a geological region where upper mantle rocks (peridotite) outcrop on the surface of the Earth.

<span class="mw-page-title-main">Geology of New Caledonia</span>

The geology of New Caledonia includes all major rock types, which here range in age from ~290 million years old (Ma) to recent. Their formation is driven by alternate plate collisions and rifting. The mantle-derived Eocene Peridotite Nappe is the most significant and widespread unit. The igneous unit consists of ore-rich ultramafic rocks thrust onto the main island. Mining of valuable metals from this unit has been an economical pillar of New Caledonia for more than a century.

<span class="mw-page-title-main">Central Asian Orogenic Belt</span> Phanerozoic accretionary orogen

The Central Asian Orogenic Belt (CAOB), also called the Altaids, is one of the world's largest Phanerozoic accretionary orogens, and thus a leading laboratory of geologically recent crustal growth. The orogenic belt is bounded by the East European Craton and the North China Craton in the Northwest-Southeast direction, as well as Siberia Craton and Tarim Craton in the Northeast-Southwest direction. It formed by ocean closures during Neoproterozoic to the late Phanerozoic time, from around 750 to 150 Ma. Like many other accretionary orogenic belts, the Central Asian Orogenic Belt consists of a huge amount of magmatic arcs, arc-related basins, accretionary complexes, seamounts, continental fragments and ophiolites. It is also considered a relatively distinctive collisional orogenic belt because widespread subduction-accretion complexes and arc magmatic rocks can be found in the region, but collision-related foreland basins are not common.

<span class="mw-page-title-main">Chile Ridge</span> Submarine oceanic ridge in the Pacific Ocean

The Chile Ridge, also known as the Chile Rise, is a submarine oceanic ridge formed by the divergent plate boundary between the Nazca plate and the Antarctic plate. It extends from the triple junction of the Nazca, Pacific, and Antarctic plates to the Southern coast of Chile. The Chile Ridge is easy to recognize on the map, as the ridge is divided into several segmented fracture zones which are perpendicular to the ridge segments, showing an orthogonal shape toward the spreading direction. The total length of the ridge segments is about 550–600 km.

References