Richmond Railway Bridge

Last updated

Richmond Railway Bridge
Richmond Railway Bridge 333r1.jpg
Richmond Railway Bridge looking downstream
Coordinates 51°27′36″N0°18′49″W / 51.46°N 0.3136°W / 51.46; -0.3136
Carries National Rail services operated by South Western Railway
Crosses River Thames
Locale Richmond
Other name(s)Richmond Windsor and Staines Railway Bridge [1]
Maintained by Network Rail
Heritage status Grade II listed structure [1]
Characteristics
Design Truss arch bridge
Material Steel
Total length91.5 metres [1]
No. of spans3
History
Designer Joseph Locke (1848);
J W Jacomb-Hood (1908)
Opened1848; rebuilt 1908 [1]
Statistics
Listed Building – Grade II
Official nameRichmond Railway Bridge and Approach Viaduct
Designated26 November 2008
Reference no.1393016
Location
Richmond Railway Bridge

Richmond Railway Bridge in Richmond, south-west London, crosses the River Thames immediately upstream of Twickenham Bridge. It carries National Rail services operated by South Western Railway (SWR) on the Waterloo to Reading Line, and lies between Richmond and St Margarets stations. The bridge was amongst the first railway crossings of the Thames. [1]

Contents

The first Richmond Railway Bridge was built by the contractor Thomas Brassey and designed by the civil engineers Joseph Locke and J. E. Errington on behalf of the London and South Western Railway (L&SWR). Opened during 1848, it was originally known as the Richmond Windsor and Staines Railway Bridge. [1] Due to concerns over the bridge's use of cast iron in its construction, it was rebuilt during the 1900s, the principal change being the substitution of iron elements for steel counterparts. This second bridge, which heavily reused elements of the original, was designed by the L&SWR's then-chief engineer, J. W. Jacomb-Hood, and constructed by the Horseley Bridge Company between 1906 and 1908.

The second bridge is visually similar to the earlier structure, retaining much of its aesthetics and original features despite subsequent refurbishment and maintenance programmes, including the replacement of its decking and girders during the 1980s. Since 2008, both the bridge itself and its brick approach viaduct have been Grade II listed structures, protecting them from unsympathetic alterations.

History

Shortly after the arrival of the London and South Western Railway (L&SWR) at Richmond station in 1846, ambitions to extend the line through to Windsor, facilitating a direct connection between Clapham Junction, Richmond and Waterloo, would be put into action. [1] Prior to this, the Thames area had experienced relatively little in terms of railway development despite a nationwide boom in the industry, largely due to a prohibition that had been enacted by Parliament which prevented the construction of surface railways in central London. Having secured authorisation to proceed, the Richmond Railway Bridge over the Thames would be amongst the first railway crossings of the river to be constructed. [1]

Responsibility for the design of this first railway bridge was assigned to the accomplished civil engineers Joseph Locke and J. E. Errington; they also worked together on a similar bridge at Barnes. [2] Its construction was performed by the prolific contractor Thomas Brassey. [1] This first bridge comprised three 100-foot cast iron girders, which were supported on stone-faced land arches in combination with a pair of stone-faced river piers with rounded cutwaters. [2] In accompaniment to the bridge itself, a sizable arched brick viaduct crossing Richmond's Old Deer Park, was built for the bridge's eastern approach. This viaduct features ornamentation and decorative features, which was inserted into the design at the insistence of the Crown commissioners of the park. [1]

While the bridge proved itself to be relatively problem-free in operation, by the start of the twentieth century, there were considerable concerns over the Richmond Railway Bridge's structural integrity, largely due to the use of cast iron in its construction. [1] To address these concerns, railway officials decided that the bridge ought to be rebuilt in a new design, which was produced by the L&SWR's then-chief engineer, J. W. Jacomb-Hood. A contract to undertake the fabrication and erection of this second bridge was awarded to the Horseley Bridge Company in 1906. [1]

The second bridge, which was completed during 1908, actually retained or reused numerous elements of the first bridge, including the existing piers and abutments. [3] This new design was sympathetic to the original bridge's design, with the distinctive open spandrels having been intentionally reproduced via vertical dividers. Considerable attention was paid to the bridge's aesthetics, particularly in respect to the new steel girders that formed a core element of this new structure. [1] This steel superstructure primarily comprised four shallow-arched ribs for each span, which are braced together as two pairs and are pinned towards their ends as to permit movement; as such, each track is effectively carried by a separate steel arch bridge placed side-by-side. [1]

Further works have been performed to the structure over time. During 1984, the primary girders and decking of the bridge were entirely replaced. [4] Despite having received multiple renewal programmes over the course of a century, the bridge is said to have retained much of the appearance of the original 1848 structure, while a significant proportion of historic fabric has also survived through to the present day. [1]

Both the Richmond Railway Bridge itself and its adjacent approach viaduct were declared to be a Grade II listed structure in 2008. [1] This status is intended to protect the structure from any unsympathetic developments with the aim of preserving its special character. [5]

See also

Related Research Articles

<span class="mw-page-title-main">Kew Railway Bridge</span> Bridge in Kew

Kew Railway Bridge spans the River Thames in London, England, between Kew and Strand-on-the-Green, Chiswick. The bridge was opened in 1869.

<span class="mw-page-title-main">Twickenham Bridge</span> Bridge in Richmond / St. Margarets

Twickenham Bridge crosses the River Thames in southwest London, England. Built in 1933 as part of the newly constructed "Chertsey Arterial Road", the bridge connects the Old Deer Park district of Richmond on the south bank of the river to St. Margarets on the north bank, both within the London Borough of Richmond upon Thames. Twickenham Bridge gets its name from the fact that it is on the road to the town of Twickenham, which is approximately 3 km upstream from Twickenham Bridge, past Richmond Bridge. Given the bridge's unique position on the river, St Margarets is actually at the southwestern end of the bridge, despite being on the north bank, while Richmond, south of the Thames, is at the northeastern end of the bridge.

<span class="mw-page-title-main">Battersea Railway Bridge</span> Bridge across the River Thames in London

The Battersea Railway Bridge is a bridge across the River Thames in London, between Battersea and Fulham. It is used by the West London Line of the London Overground from Clapham Junction to Willesden Junction. Dating from 1863, the bridge is one of the oldest crossings over the Thames in London.

<span class="mw-page-title-main">Runcorn Railway Bridge</span> Bridge in northwest England

The Runcorn Railway Bridge, Ethelfleda Bridge or Britannia Bridge crosses the River Mersey at Runcorn Gap between Runcorn and Widnes in Cheshire, England. It is alongside the Silver Jubilee Bridge. The bridge is recorded in the National Heritage List for England as a Grade II* Listed building.

<span class="mw-page-title-main">Fulham Railway Bridge</span> Truss bridge that crosses the River Thames in London

Fulham Railway Bridge crosses the River Thames in London. It is very close to Putney Bridge, and carries the London Underground District line between Putney Bridge station on the North, and East Putney station on the South. Fulham Railway Bridge can also be crossed on foot, on the downstream (east) side.

<span class="mw-page-title-main">Kingston Railway Bridge</span> Bridge in Kingston upon Thames

Kingston Railway Bridge in Kingston upon Thames, London, crosses the River Thames on the reach above Teddington Lock. It carries the Kingston Loop Line train service from London Waterloo station, where the majority of services begin and end and which line includes a maintenance depot. The loop diverges from main lines at New Malden and Richmond. East and west of the bridge along the line are Kingston and Hampton Wick stations. The loop returns to the south bank of its terminus via Richmond Railway Bridge. The loop feeds a branch line, a further incentive for the 1863 construction of the bridge, Shepperton Branch Line.

<span class="mw-page-title-main">Barnes Railway Bridge</span> Bridge in London, England

Barnes Railway Bridge is a Grade II listed railway bridge in the London Borough of Richmond upon Thames and the London Borough of Hounslow. It crosses the River Thames in London in a northwest to southeast direction at Barnes. It carries the South Western Railway's Hounslow Loop Line, and lies between Barnes Bridge and Chiswick stations. It can also be crossed on foot, and is one of only three bridges in London to combine pedestrian and rail use; the others being Hungerford Bridge and Golden Jubilee Bridges and Fulham Railway Bridge.

<span class="mw-page-title-main">Gatehampton Railway Bridge</span> Bridge in Lower Basildon, Berkshire

Gatehampton Railway Bridge, otherwise referred to as Gatehampton Viaduct, is a railway bridge carrying the Great Western Main Line over the River Thames in Lower Basildon, Berkshire, England. It takes the line between the stations at Goring and Streatley and Pangbourne, and crosses the Thames on the reach between Whitchurch Lock and Goring Lock.

<span class="mw-page-title-main">Dee Bridge disaster</span> Railway accident

The Dee Bridge disaster was a rail accident that occurred on 24 May 1847 in Chester, England, that resulted in five fatalities. It revealed the weakness of cast iron beam bridges reinforced by wrought iron tie bars, and brought criticism of its designer, Robert Stephenson, the son of George Stephenson.

<span class="mw-page-title-main">Landore Viaduct</span> Railway viaduct in Landore, Wales

The Landore viaduct is a railway viaduct over the Swansea valley and the River Tawe at Landore in south Wales. It provides a link between Swansea city center and the West Wales Line to the South Wales Main Line. The valley crossing provides a panoramic view of Landore, Kilvey Hill, the Liberty Stadium and the Swansea Enterprise Park.

<span class="mw-page-title-main">Loughor Viaduct</span> Bridge over River Loughor, south Wales

The Loughor railway viaduct carries the West Wales Line across the River Loughor. It is adjacent, and runs parallel to, the Loughor road bridge. The 1880 viaduct was granted Grade II listed building status. Before it was demolished in early 2013, the viaduct was the last remaining timber viaduct designed by Isambard Kingdom Brunel.

<span class="mw-page-title-main">Usk Railway Bridge</span> Bridge in Newport

The Usk Railway Bridge is a railway viaduct in Newport city centre, Wales. It crosses the River Usk in an east—west direction, carrying the Great Western Main Line.

<span class="mw-page-title-main">Victoria Bridge, Penrith</span> Bridge in New South Wales, Australia

The Victoria Bridge, also known as the Victoria Bridge over the Nepean River, is a heritage-listed former railway bridge and now wrought iron box plate girder road bridge across the Nepean River on the Great Western Highway in the western Sydney suburb of Penrith in the City of Penrith local government area of New South Wales, Australia. The bridge was designed by John Whitton, the Engineer–in–Chief of New South Wales Government Railways, and built from 1862 to 1867 by William Piper, Peto Brassey and Betts (superstructure), William Watkins (piers). It is also known as Victoria Bridge, The Nepean Bridge and RTA Bridge No. 333. It was added to the New South Wales State Heritage Register on 27 May 2016.

<span class="mw-page-title-main">Windsor Railway Bridge</span> Bridge in Windsor

Windsor Railway Bridge is a wrought iron 'bow and string' bridge in Windsor, Berkshire, crossing the River Thames on the reach between Romney Lock and Boveney Lock. It carries the branch line between Slough and Windsor.

<span class="mw-page-title-main">Black Potts Railway Bridge</span> Bridge in Windsor

Black Potts Railway Bridge carries the railway from London (Waterloo) to Windsor, Berkshire across the River Thames. The Staines to Windsor & Eton Line terminates immediately after the bridge at Windsor and Eton Riverside railway station. The bridge crosses the Thames on the reach above Old Windsor Lock, shortly before Romney Lock.

<span class="mw-page-title-main">Kennington Railway Bridge</span> Bridge in Kennington, Oxfordshire

Kennington Railway Bridge is a railway bridge over the River Thames near Kennington, Oxfordshire between Sandford Lock and Iffley Lock. It carries the freight railway branch line that serves the BMW Mini factory at Cowley. The freight railway is part of the former Wycombe Railway that linked Maidenhead and Oxford via High Wycombe and Princes Risborough.

<span class="mw-page-title-main">Dutton Viaduct</span> Bridge in Dutton, Cheshire

Dutton Viaduct is on the West Coast Main Line where it crosses the River Weaver and the Weaver Navigation between the villages of Dutton and Acton Bridge in Cheshire, England, not far from Dutton Horse Bridge. It is recorded in the National Heritage List for England as a Grade II* listed building.

<span class="mw-page-title-main">Monmouth Viaduct</span> Bridge in Monmouth, Wales

The Monmouth Viaduct or Chippenham Meadow Viaduct is a 20-arch 183m red sandstone viaduct, with two 23m steel lattice-girder spans over the river. It carried the Coleford, Monmouth, Usk & Pontypool Railway line across the River Wye at Monmouth, Wales. A further river crossing by the Ross and Monmouth Railway was later built nearby.

<span class="mw-page-title-main">Caledonian Railway Bridge</span> Bridge in Scotland

The Caledonian Railway Bridge is a bridge crossing the River Clyde at Broomielaw in Scotland. It is adjacent to Glasgow Central Station.

<span class="mw-page-title-main">Nepean River railway bridge, Menangle</span> Bridge in New South Wales, Australia

The Nepean River railway bridge is a heritage-listed railway bridge that carries the Main Southern railway line across Menangle Road and the Nepean River located at the outer south-western Sydney settlement of Menangle in the Wollondilly Shire local government area of New South Wales, Australia. It was designed by John Whitton as the Engineer-in-Chief, of the New South Wales Government Railways and NSW Department of Public Works. The railway bridge was built in 1863 by Messers Peto, Brassey and Betts. It is also known as Menangle rail bridge over Nepean River and Menangle Railway Bridge. The property was added to the New South Wales State Heritage Register on 2 April 1999.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Historic England (26 November 2008). "Richmond Railway Bridge and Approach Viaduct (1393016)". National Heritage List for England . Retrieved 31 July 2020.
  2. 1 2 Cherry, Bridget; Pevsner, Nikolaus (1983). The Buildings of England – London 2: South. London: Penguin Books. p. 716. ISBN   0-14-0710-47-7.
  3. ↑ Addison, Martin. "TQ1774 : Richmond Railway Bridge, River Thames". Geograph. Retrieved 10 November 2012.
  4. ↑ "Richmond Railway Bridge". Tour UK. Just Tour Ltd. Archived from the original on 22 June 2013. Retrieved 10 February 2013.
  5. ↑ "London bridges get listed status". BBC News . London. 26 November 2008. Retrieved 13 October 2012.

51°27′36″N0°18′49″W / 51.46000°N 0.31361°W / 51.46000; -0.31361

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.