Silver diethyldithiocarbamate

Last updated
Silver diethyldithiocarbamate
Silver diethyldithiocarbamate 2D structure.svg
3D model silver diethyldithiocarbamate.png
Names
IUPAC name
Silver diethylcarbamodithioate
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.014.549 OOjs UI icon edit-ltr-progressive.svg
EC Number
  • 216-003-7
PubChem CID
UNII
  • InChI=1S/C5H11NS2.Ag/c1-3-6(4-2)5(7)8;/h3-4H2,1-2H3,(H,7,8);/q;+1/p-1
    Key: NSVHDIYWJVLAGH-UHFFFAOYSA-M
  • CCN(CC)C(=S)[S-].[Ag+]
Properties
C5H10AgNS2
Molar mass 256.13 g·mol−1
AppearanceGreenish-yellow solid
Melting point 175 °C (347 °F; 448 K)
Insoluble
Solubility Soluble in pyridine
Hazards [1]
GHS labelling:
GHS-pictogram-exclam.svg
Warning
H315, H319, H335
P261, P264, P271, P280, P302+P352, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P403+P233, P405, P501
NFPA 704 (fire diamond)
NFPA 704.svgHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
2
1
0
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Silver diethyldithiocarbamate is a chemical compound, with formula AgS2CN(CH2CH3)2. It is the silver salt of diethyldithiocarbamic acid; [2] the latter is a well-known chelator of heavy metals. In most of its applications, silver diethyldithiocarbamate resembles the cheaper sodium diethyldithiocarbamate, but it is uniquely insoluble in water. That property makes it a useful analytical reagent for determining arsenic concentrations.

Contents

Preparation

Silver diethyldithiocarbamate can be prepared by mixing a solution sodium diethyldithiocarbamate with a solution of silver nitrate. A precipitate forms immediately and can be filtered to isolate from the rest of the mixture. [3] The solid should then be rinsed with hot water in order to remove the residual acid salt that will be present. [4]

Application

Silver diethyldithiocarbamate can be applied to introduce the diethyldithiocarbamato ligand to a coordination compound. Silver diethyldithiocarbamate can also be used to detect Nitrogen monooxide in the brain and other tissue. These applications are similar to the applications of sodium diethyldithiocarbamate, which is more practical to use from a synthetic and toxicological perspective. [5]

Determination of arsenic concentration

Figure 1: arsenic tris(diethyldithiocarbamate) As tri DDC.tif
Figure 1: arsenic tris(diethyldithiocarbamate)
Figure 2: diethyldithiocarbamate; another possible product HSDCC.tif
Figure 2: diethyldithiocarbamate; another possible product

The solubility of silver diethyldithiocarbamate, compared to sodium diethyldithiocarbamate, allows it to be used to determine arsenic concentrations in water. Silver diethyldithiocarbamate dissolved in pyridine appears as an intensely yellow-colored solution. Arsenic ions are transferred to an arsine generating flask and diluted with water. Sulfuric acid, potassium iodide solution, and stannous chloride dihydrate are diluted in a solution of concentrated hydrochloric acid and mixed. The apparatus is plugged loosely with lead acetate wool, which acts as a scrubber. The pyridine and silver diethyldithiocarbamate solution is added to the tube and serves as the absorber solution. Granulated zinc is added to the arsine generator flask, which will result in the production of hydrogen because of the presence of acid. The arsine is carried through the tube by the generated hydrogen gas. The arsine reacts with the silver diethyldithiocarbamate solution and forms red-colored products (535 nm). Ultraviolet-visible spectroscopy can be used to determine the concentration of arsenic can be calculated based on Beer's Law. [6] [7]

The red product is a result of arsine bubbling through the silver diethyldithiocarbamate solution and there are two likely products responsible for the color change. One is arsenic substituting the silver in diethyldithiocarbamate, resulting a coordination compound in which three diethyldithiocarbamate ligands are bound to an arsenic atom (Figure 1). The other product is a result of the reduction of silver diethyldithiocarbamate (Figure 2).

This method for determination of arsenic concentration is applicable to not only waste water and mineral water but also petroleum, the human body, [8] various foods and ores, [9] and pyrolysis gasses. [10] There have been reports of silver diethyldithiocarbamate being modified into an electrode to be used for similar purposes. [11] [12]

This method of determining arsenic levels in water is compared to the Gutzeit procedure and has the advantages of faster hydrogen gas absorption and more objective color interpretation. [8]

Related Research Articles

pH Measure of the level of acidity or basicity of an aqueous solution

In chemistry, pH, also referred to as acidity or basicity, historically denotes "potential of hydrogen". It is a logarithmic scale used to specify the acidity or basicity of aqueous solutions. Acidic solutions are measured to have lower pH values than basic or alkaline solutions.

<span class="mw-page-title-main">Titration</span> Laboratory method for determining the concentration of an analyte

Titration is a common laboratory method of quantitative chemical analysis to determine the concentration of an identified analyte. A reagent, termed the titrant or titrator, is prepared as a standard solution of known concentration and volume. The titrant reacts with a solution of analyte to determine the analyte's concentration. The volume of titrant that reacted with the analyte is termed the titration volume.

<span class="mw-page-title-main">Hydride</span> Molecule with a hydrogen bound to a more electropositive element or group

In chemistry, a hydride is formally the anion of hydrogen (H), a hydrogen atom with two electrons. The term is applied loosely. At one extreme, all compounds containing covalently bound H atoms are also called hydrides: water (H2O) is a hydride of oxygen, ammonia is a hydride of nitrogen, etc. For inorganic chemists, hydrides refer to compounds and ions in which hydrogen is covalently attached to a less electronegative element. In such cases, the H centre has nucleophilic character, which contrasts with the protic character of acids. The hydride anion is very rarely observed.

<span class="mw-page-title-main">Marsh test</span> Method for detecting arsenic

The Marsh test is a highly sensitive method in the detection of arsenic, especially useful in the field of forensic toxicology when arsenic was used as a poison. It was developed by the chemist James Marsh and first published in 1836. The method continued to be used, with improvements, in forensic toxicology until the 1970s.

<span class="mw-page-title-main">Arsine</span> Chemical compound

Arsine (IUPAC name: arsane) is an inorganic compound with the formula AsH3. This flammable, pyrophoric, and highly toxic pnictogen hydride gas is one of the simplest compounds of arsenic. Despite its lethality, it finds some applications in the semiconductor industry and for the synthesis of organoarsenic compounds. The term arsine is commonly used to describe a class of organoarsenic compounds of the formula AsH3−xRx, where R = aryl or alkyl. For example, As(C6H5)3, called triphenylarsine, is referred to as "an arsine".

<span class="mw-page-title-main">Sodium percarbonate</span> Chemical compound

Sodium percarbonate, or sodium carbonate peroxide is a chemical substance with formula Na
2
H
3
CO
6
. It is an adduct of sodium carbonate and hydrogen peroxide whose formula is more properly written as 2 Na
2
CO
3
 · 3 H
2
O
2
. It is a colorless, crystalline, hygroscopic and water-soluble solid. It is sometimes abbreviated as SPC. It contains 32.5% by weight of hydrogen peroxide.

Sulfur trioxide (alternative spelling sulphur trioxide, also known as nisso sulfan) is the chemical compound with the formula SO3. It has been described as "unquestionably the most [economically] important sulfur oxide". It is prepared on an industrial scale as a precursor to sulfuric acid.

In analytical electrochemistry, coulometry determines the amount of matter transformed during an electrolysis reaction by measuring the amount of electricity consumed or produced. It can be used for precision measurements of charge, and the amperes even used to have a coulometric definition. However, today coulometry is mainly used for analytical applications. It is named after Charles-Augustin de Coulomb.

<span class="mw-page-title-main">Devarda's alloy</span> Chemical compound

Devarda's alloy is an alloy of aluminium (44% – 46%), copper (49% – 51%) and zinc (4% – 6%).

<span class="mw-page-title-main">Stibine</span> Chemical compound

Stibine (IUPAC name: stibane) is a chemical compound with the formula SbH3. A pnictogen hydride, this colourless, highly toxic gas is the principal covalent hydride of antimony, and a heavy analogue of ammonia. The molecule is pyramidal with H–Sb–H angles of 91.7° and Sb–H distances of 170.7 pm (1.707 Å). This gas has an offensive smell like hydrogen sulfide (rotten eggs).

<span class="mw-page-title-main">Diethyl azodicarboxylate</span> Chemical compound

Diethyl azodicarboxylate, conventionally abbreviated as DEAD and sometimes as DEADCAT, is an organic compound with the structural formula CH3CH2−O−C(=O)−N=N−C(=O)−O−CH2CH3. Its molecular structure consists of a central azo functional group, RN=NR, flanked by two ethyl ester groups. This orange-red liquid is a valuable reagent but also quite dangerous and explodes upon heating. Therefore, commercial shipment of pure diethyl azodicarboxylate is prohibited in the United States and is carried out either in solution or on polystyrene particles.

Iodometry, known as iodometric titration, is a method of volumetric chemical analysis, a redox titration where the appearance or disappearance of elementary iodine indicates the end point.

<span class="mw-page-title-main">Cacodylic acid</span> Chemical compound

Cacodylic acid is an organoarsenic compound with the formula (CH3)2AsO2H. With the formula R2As(O)OH, it is the simplest of the arsinic acids. It is a colorless solid that is soluble in water.

<span class="mw-page-title-main">Chloroplatinic acid</span> Chemical compound

Chloroplatinic acid (also known as hexachloroplatinic acid) is an inorganic compound with the formula [H3O]2[PtCl6](H2O)x (0 ≤ x ≤ 6). A red solid, it is an important commercial source of platinum, usually as an aqueous solution. Although often written in shorthand as H2PtCl6, it is the hydronium (H3O+) salt of the hexachloroplatinate anion (PtCl2−
6
). Hexachloroplatinic acid is highly hygroscopic.

<span class="mw-page-title-main">Silver acetate</span> Chemical compound with formula AgC₂H₃O₂

Silver acetate is a coordination compound with the empirical formula CH3CO2Ag (or AgC2H3O2). A photosensitive, white, crystalline solid, it is a useful reagent in the laboratory as a source of silver ions lacking an oxidizing anion.

<span class="mw-page-title-main">Molybdenum blue</span> Pigment

Molybdenum blue is a term applied to:

Alcohol oxidation is a collection of oxidation reactions in organic chemistry that convert alcohols to aldehydes, ketones, carboxylic acids, and esters where the carbon carries a higher oxidation state. The reaction mainly applies to primary and secondary alcohols. Secondary alcohols form ketones, while primary alcohols form aldehydes or carboxylic acids.

<span class="mw-page-title-main">Chloro(pyridine)cobaloxime</span> Chemical compound

Chloro(pyridine)cobaloxime is a coordination compound containing a CoIII center with octahedral coordination. It has been considered as a model compound of vitamin B12 for studying the properties and mechanism of action of the vitamin. It belongs to a class of bis(dimethylglyoximato)cobalt(III) complexes with different axial ligands, called cobaloximes. Chloro(pyridine)cobaloxime is a yellow-brown powder that is sparingly soluble in most solvents, including water.

<span class="mw-page-title-main">Bromopyrogallol red</span> Chemical compound

Bromopyrogallol red is frequently used in analytical chemistry as a reagent for spectrophometric analysis and as an complexometric indicator.

<span class="mw-page-title-main">Furegrelate</span> Chemical compound

Furegrelate, also known as 5-(3-pyridinylmethyl)benzofurancarboxylic acid, is a chemical compound with thromboxane enzyme inhibiting properties that was originally developed by Pharmacia Corporation as a drug to treat arrhythmias, ischaemic heart disorders, and thrombosis but was discontinued. It is commercially available in the form furegrelate sodium salt.

References

  1. https://www.fishersci.com/store/msds?partNumber=AA1189809&productDescription=SLVR+DIETHLDITHIOCARBAMATE+10G&vendorId=VN00024248&countryCode=US&language=en%5B%5D
  2. "Arsenic and its compounds. Silver diethyldithiocarbamate method". American Industrial Hygiene Association Journal. 33 (3): 197. June 4, 2010. doi:10.1080/0002889728506630. ISSN   0002-8894. PMID   5074677. S2CID   232194544.
  3. Budesinsky, B. W. (1979-03-01). "Arsenic colorimetry with silver diethyldithiocarbamate". Microchemical Journal. 24 (1): 80–87. doi:10.1016/0026-265X(79)90041-9. ISSN   0026-265X.
  4. "Method 200.7, Revision 4.4: Determination of Metals and Trace Elements in Water and Wastes by Inductively Coupled Plasma-Atomic Emission Spectrometry" (PDF). United States Environmental Protection Agency . 1994. p. 59. Retrieved 2023-01-01.
  5. "Silver diethyldithiocarbamate". Sigma-Aldrich.
  6. Fischer, Daniel Carl (1989). Colorimetric determination and speciation of arsenic with silver diethyldithiocarbamate (Thesis). p. 30. doi: 10.25669/5x8m-gu68 .
  7. "Silver Diethyldithiocarbamate". ACS Reagent Chemicals. 2017. doi:10.1021/acsreagents.4321.20160601. ISBN   978-0-8412-3046-0.
  8. 1 2 Bäumler, J.; Obersteg, J. Im; Shafer, R. (1968). "Determination of the level of arsenic in human bodies (population of Basle)". Deutsche Zeitschrift für die gesamte gerichtliche Medizin. 64 (2): 56–61. doi:10.1007/BF00586806. PMID   5710954. S2CID   25563058.
  9. Zhou, Zi-hong (2011). "Determination of Trace Arsenic in Phosphorus Ore". Guangzhou Huagong. 39 (6): 113.
  10. Tong, Ling; Gao, Rui-feng (2012). "Determination of arsenic content in pyrolysis by using silver diethyl dithiocarbamate spectrophotometric method". Shihua Jishu Yu Yingyong. 30 (5): 454.
  11. Lian, Kaoqi; Kang, Weijun; Li, Shan (2009). "二乙基二硫代氨基甲酸银修饰电极法测定大米中的微量硒(IV)" [Method for determination of trace element Se (IV) content in rice by silver diethyl dithio carbamate-modified electrode]. Weisheng Yanjiu (in Chinese). 38 (1): 123–124. doi:10.19813/j.cnki.weishengyanjiu.2009.01.039.
  12. Zhao, Shi-hao; Zhang, Ping-Ping; Chen, Li-Yan (2009). "Determination of chloride ion in selenium(IV) system with silver-diethyldithocarbamate modified electrode". Asian Journal of Chemistry. 21 (8): 6265–6270.