Chevrolet Corvette SS | |
---|---|
![]() | |
Overview | |
Manufacturer | Chevrolet (General Motors) |
Also called | XP-64 |
Production | 1957 |
Designer | Clare MacKichan |
Body and chassis | |
Body style | Roadster |
Layout | Front-engine, rear-wheel-drive layout |
Powertrain | |
Engine | 283 cu in (4.6 L) |
Transmission | 4-speed manual |
Dimensions | |
Wheelbase | 92.0 in (2,337 mm) |
Length | 168 in (4,267 mm) |
Curb weight | 1,850 lb (839 kg) |
Chronology | |
Predecessor | Chevrolet Corvette SR-2 [1] |
Successor | XP-87 Stingray racer |
The Chevrolet Corvette SS is a sports racing car built by Chevrolet in 1957. The car raced once at the 1957 12 Hours of Sebring before Chevrolet withdrew from all racing activities in response to a ban that year by the Automobile Manufacturers Association for all of its member companies, which included GM.
By the mid-1950s GM engineer and future Director of High Performance Zora Arkus-Duntov was convinced that publicity from Corvette racing victories would increase sales of the car. [2] Duntov took a team of three Corvettes to Daytona Speedweeks in February 1956; two cars that were essentially stock and one modified car. John Fitch won the Sports Car division in one of the stock Corvettes, and Betty Skelton took second place in the other, while Duntov won the Modified Sports Car division in the modified car. [3] Four Corvettes, all with the new SR package and one with additional modifications including an enlarged engine, appeared in the 1956 12 Hours of Sebring. Duntov declined to participate, so Fitch acted as Team Manager. [4] General Manager of Chevrolet Ed Cole, watching the 1956 Sebring race, realized that only a Corvette built specifically for racing stood a chance of winning against the international competition. [2] : 74 [5] Two other racing Corvettes called SR-2s were built, one car for Jerry Earl, son of Harley Earl, the head of GM's Art and Color Section, and a second car for Bill Mitchell. [6]
At the New York Auto Show in December 1956 Chevrolet debuted the 1957 Corvette Super Sport, a show car based on a production Corvette with the latest engine and some features first seen on the SR and SR-2 racing cars. [7] [2] : 72
Harley Earl brought Jack Ensley's Jaguar D-Type into GM's Research Studio. [8] [4] : 16 He instructed the team to convert the car to left-hand drive, install a Chevrolet V8 engine, and restyle the car incorporating styling cues from the production Corvette. Work on the D-Type conversion started May 1956. [8] Engineers working on the conversion identified several problems with Earl's idea, leading to the conversion being abandoned, and the project moving in another direction. [9] [2] : 74 [10] : 32 Some suggest that the entire D-Type episode was a ruse by Earl to get Duntov committed to the project. [4] [11] : 26 [5]
The redirected project received GM designation XP-64, with approval given in August 1956 to ready two cars to race at Sebring in six months time. [12] [13] : 54 The ultimate goal was to race the car in the 24 Hours of Le Mans. [14] [15] GM designer Clare MacKichan headed up the team designing the bodywork. [5] [2] : 74 Also on the design team were Robert Cumberford and Anatole Lapine. [16] : 189 [17] Some references include Bob Cadaret in this group. [5] Although the Jaguar was gone, its shape influenced MacKichan's design. [2] : 74
Development of the car's chassis, drivetrain and running gear took place in Duntov's skunkworks shop at GM. [5] [18] At Lapine's suggestion, a Mercedes-Benz 300 SL was obtained, put up on stands and the body removed. [19] : 50–51 [11] The Mercedes' chassis was cut and modified to accept a new small-block V8 drivetrain and new rear suspension of Duntov's design. [19] : 49–53 This first chassis was used to create a development mule that would receive a fiberglass body. That frame was also used as a template for building all subsequent SS chassis. [4] [20]
The official name for Project XP-64 was the Corvette SS. This was the first Chevrolet to wear the "SS" badge. [21] [22] When Cole announced the car, it was described as an engineering project researching various features to improve both performance and safety. [23]
The Corvette SS was Chevrolet's first purpose-built race car. [24] It was considered the successor to the three "SR" cars that raced at 1956 in Sebring, and the two SR-2 Corvettes, [15] which were based on a production Corvette chassis.
Two cars were completed; the development car called the "mule", and a full-spec Corvette SS. Three additional Corvette SS chassis were built, but not turned into complete cars. [23] Some references report that Mitchell later bought the complete development mule for just US$1 as the base for his Stingray racer. [25] In interviews Shinoda and Mitchell both describe Mitchell buying a spare SS chassis for US$500. [26] He estimated the value of the chassis at US$500,000. [27]
After its career ended, the Corvette SS remained in storage at various locations within GM until Duntov convinced John DeLorean, Chevrolet's new general manager, to donate the car to the Indianapolis Motor Speedway. [28]
In 2006 a plan was made to apply the Corvette SS name to a special version of the C6 Corvette. [21] This enhanced Corvette was eventually released as the Corvette ZR1.
The chassis for the Corvette SS was a tubular steel space-frame unit inspired by that of the Mercedes-Benz 300 SL. [16] : 189
The full-spec car had a body made of magnesium, rather than the fiberglass used by production Corvettes. [29] The mule had a fiberglass body. A transparent bubble top was also produced for the car, but was not used when racing. [30]
Front suspension was by short-long arms with coil springs over tubular shock absorbers. At the rear was a De Dion tube with two pairs of trailing arms and coil over shocks.
The engine in the Corvette SS was a production Chevrolet small block V8 that displaced 283 cu in (4,640 cc). [8] It was fitted with Rochester Ramjet fuel injection. 9.0:1 compression aluminum cylinder heads and a deep-sump oil pan made of magnesium were used. [23] The camshaft was a special “Duntov” profile solid-lifter piece. The exhaust system used the 40 in (1,016 mm) tuned-length headers developed for the SR2. [23] Power output was 310 hp (231.2 kW) and 295 lb⋅ft (400.0 N⋅m).
The transmission was a close ratio four-speed Borg Warner manual with an aluminum alloy case. [23] [4]
The differential was a Halibrand quick-change unit. Depending on the gearset installed, top speed was between 143 and 180 mph (230.1 and 289.7 km/h). [4]
The brakes were twin-leading-shoe Center-Plane mechanisms from Chrysler with a custom GM designed Al-Fin drum made up of an iron face and inner surface and finned aluminum cover. Heat transfer was increased by flowing aluminum through over 100 holes drilled in the iron drum. [23] The brakes were inboard at the rear. [23]
Overall weight for the complete car was 1,850 lb (839.1 kg). [31]
Chevrolet Corvette SS: | Detail [4] | |
---|---|---|
Engine: | Chevrolet small-block V8 | |
Displacement: | 283 cu in (4,640 cc) | |
Bore × Stroke: | 3.875 in × 3.000 in (98 mm × 76 mm) | |
Maximum power: | 310 hp (231.2 kW) at 6000 rpm | |
Maximum torque: | 295 ft⋅lb (400.0 N⋅m) at 4400 rpm | |
Compression ratio: | 9.0:1 (11.0:1 optional) | |
Valvetrain: | Single cam-in-block, pushrods, 2 overhead valves per cylinder | |
Induction: | Rochester constant-flow mechanical fuel-injection | |
Cooling: | Water-cooled | |
Transmission: | 4-speed manual | |
Differential: | Halibrand quick-change | |
Steering: | Saginaw recirculating ball — 2.5 turns lock-to-lock | |
Brakes f/r: | Drum/drum | |
Suspension front: | Short-long arms (SLA) with coil springs over tubular Delco shock absorbers, anti-roll bar | |
Suspension rear: | De Dion tube, four trailing arms, coil springs over tubular Delco shock absorbers | |
Body/Chassis: | Magnesium body (fiberglass body on development mule) Tubular steel space frame chassis | |
Track f/r: | 51.5 / 51.5 in (1,308 / 1,308 mm) | |
Wheelbase: | 92 in (2,337 mm) | |
Wheels: | Halibrand cast magnesium, 5.00-15 with knock-off hubs | |
Tires f/r: | Firestone Super Sports 6.50-15/7.60-15 | |
Length Width Height: | 168 in (4,267 mm) ——— 48.7 in (1,237 mm) | |
Weight: | 1,850 lb (839.1 kg) | |
Maximum speed: |
Duntov had originally signed Juan Manuel Fangio and Carroll Shelby to drive the car at Sebring in 1957, but both asked to be released from their contracts, so Fitch and Piero Taruffi were substituted on short notice. [4] In practice, and driving the mule rather than the full-spec SS, Fitch managed a lap time of 3:32, while Taruffi turned in a time of 3:35 in the same car. Duntov persuaded both Stirling Moss and Fangio to try the mule in practice, and they turned in times of 3:28.2 and 3:27.2 respectively. [32] [33] [4] Late Friday Fitch did a few laps in the magnesium-bodied SS, and found that while the fiberglass body of the mule insulated the driver from heat produced by the engine, the magnesium body provided no such protection, allowing the heat into the interior unimpeded. He also encountered problems with the brakes on the car. Parts from the mule were swapped over to the SS.
For the race, the starting grid was determined by engine displacement, so the SS started in the number one position. Fitch was in the car for the Le Mans start. After the third lap he pitted to have two front tires replaced, then turned in a lap time of 3:29.8; the fastest lap the SS would achieve. Fitch later pitted to have first a coil wire, then the coil itself, replaced. The car began to overheat. Then the bushings tying the rear lower trailing arms to the chassis split due to having been installed improperly. Fitch retired the SS after 23 laps. [34]
In April 1957, the Automobile Manufacturers Association (AMA) voted to enact a ban on motor racing for all of its member companies, which included GM. The ban went into effect on 1 June, and GM accordingly withdrew the SS from further racing. [35] [18] The drivers that had been arranged for the 1957 Le Mans did not learn of the withdrawal until a month and a half after Sebring." [23] For 1958 the Fédération Internationale de l'Automobile (FIA) reduced the maximum displacement limit to 3.0 liters for sports cars, effectively disqualifying the Corvette SS from any future European events. [36]
At the opening of the Daytona Motor Speedway in 1959, Duntov took the SS out on the track and set fastest lap with a speed of 155 mph (249.4 km/h). [37]
The Chevrolet Corvette is a line of American two-door, two-seater luxury sports cars, manufactured and marketed by GM, under the Chevrolet marque, since 1953.
John Cooper Fitch was an American racing driver and inventor. He was the first American to race automobiles successfully in Europe in the post-war era.
Zora Arkus-Duntov was a Belgian-born American engineer whose work on the Chevrolet Corvette earned him the nickname "Father of the Corvette." He is sometimes erroneously referred to as the inventor of the Corvette, whereas that title belongs to Harley Earl. He was also a professional racing driver, appearing at the 24 Hours of Le Mans four times and taking class wins in 1954 and 1955.
The Chevrolet Corvette (C6) is the sixth generation of the Corvette sports car that was produced by Chevrolet division of General Motors for the 2005 to 2013 model years. It is the first Corvette with exposed headlamps since the 1962 model. Production variants include the Z06, ZR1, Grand Sport, and 427 Convertible. Racing variants include the C6.R, an American Le Mans Series GT1 championship and 24 Hours of Le Mans GTE-Pro winner.
The Chevrolet Corvette (C1) is the first generation of the Corvette sports car produced by Chevrolet. It was introduced late in the 1953 model year and produced through 1962. This generation is commonly referred to as the "solid-axle" generation, as the independent rear suspension did not appear until the 1963 Sting Ray.
The Chevrolet Corvette (C2) is the second generation of the Corvette sports car, produced by the Chevrolet division of General Motors (GM) for the 1963 through 1967 model years.
The Chevrolet Corvette (C4) is the fourth generation of the Corvette sports car, produced by American automobile manufacturer Chevrolet from 1983 until 1996. The convertible returned, as did higher performance engines, exemplified by the 375 hp (280 kW) LT5 found in the ZR-1. In early March 1990, the ZR-1 would set a new record for the highest 24 hour-5,000 mile land-speed by going over a speed of 175 mph (282 km/h). With a completely new chassis, modern sleeker styling, and other improvements to the model, prices rose and sales declined. The last C4 was produced on June 20, 1996.
La Dawri Coachcraft was founded by Leslie Albert Dawes in British Columbia, Canada in 1956 and is credited with making Canada's first fibreglass car, the La Dawri Cavalier. The company moved to the United States in 1957 where it became one of the largest fiberglass sports car body companies during the rebody/specials craze of the 1950s and 1960s. The company ceased operations in 1965. Its name came from a combination of L A Dawes and his friend Don Wright. Dawes was born on 7 July 1933 and died in 2002.
The Chevrolet Corvette C5-R is a grand touring racing car built by Pratt Miller and Chevrolet for competition in endurance racing. The car is based on the C5 generation of the Chevrolet Corvette sports car, yet is designed purely for motorsports use. It became one of the most successful cars in GT categories, with wins at the 24 Hours of Daytona, 12 Hours of Sebring, and 24 Hours of Le Mans, as well as championships in the American Le Mans Series. The Corvette C5-Rs debuted in 1999 and continues to be raced to this day in vintage racing events, although the C5-R was effectively replaced by the Corvette C6.R in 2005.
The Bill Thomas Cheetah was an American sports car designed and engineered entirely with American components, and built from 1963 to 1966 by Chevrolet performance tuner Bill Thomas. It was developed as a competitor to Carroll Shelby's Cobra.
The Corvette Stingray Racer is a sports racing car and concept car that debuted in 1959. The car was developed in the styling studios at General Motors (GM) at the behest of Bill Mitchell, GM Vice President of styling. The design was based on a sketch by designer Pete Brock, and was further developed by Larry Shinoda. The car strongly influenced the styling of the second generation (C2) Corvette Sting Ray.
The ChevroletCorvair Monza GT (XP-777) was a mid-engined experimental prototype automobile built in 1962 and based on the early model Chevrolet Corvair series. As it was essentially a concept car, the Monza GT did not enter production.
The Chevrolet Corvette GTP was an American Grand Touring Prototype-class sports prototype racing car which successfully participated in the IMSA Camel GT from 1984 until 1989. The car was professionally fielded in competition as General Motors' Chevrolet Corvette C4 official factory team effort in the IMSA GTP class.
The Chevrolet Aerovette was a concept car created by Chevrolet, beginning life as Experimental Project 882 (XP-882) in the late 1960s. It had a mid-engine configuration using a transverse mounting of its V8 engine. Zora Arkus-Duntov's engineers originally built two XP-882 prototypes during 1969, but John DeLorean, Chevrolet's general manager, canceled the program believing it to be impractical and costly. However, when Ford announced plans to sell the DeTomaso Pantera through Lincoln-Mercury dealers, DeLorean ordered that one XP-882 prototype be cleaned up for display at the 1970 New York Auto Show.
The 1956 Florida International Grand Prix of Endurance powered by Amoco took place on 24 March, on the Sebring International Raceway,. It was the second round of the F.I.A. World Sports Car Championship. For the sixth running of the event, was a sign to many in the automotive community that this race had become North America's premier sports car race, and from an international standpoint second only to the 24 Hours of Le Mans.
The 1957 12-Hour Florida International Grand Prix of Endurance for The Amoco Trophy took place on 23 March, on the Sebring International Raceway,. It was the second round of the F.I.A. World Sports Car Championship. This was sixth running of the 12-hour race, and with the growing popularity of sports car racing in post World War II America, the event was finally coming into its own since its creation in 1952.
Anatole Carl "Tony" Lapine was an automotive designer and racing driver. Lapine worked for General Motors (GM), Opel, and Porsche. During his time as chief designer at Porsche he oversaw development of the front-engined, water-cooled 928, 924 and 944 that began to appear in the mid to late 1970s, as well as two revisions to the Porsche 911.
Briggs Swift Cunningham II was an American entrepreneur and sportsman. He is best known for skippering the yacht Columbia to victory in the 1958 America's Cup race, and for his efforts as a driver, team owner, and constructor in sports car racing, including the 24 Hours of Le Mans.
Clare M. "Mac" MacKichan was an automotive designer and executive with General Motors (GM). He is best known for designing or overseeing the design of several significant models for the Chevrolet division in the United States and Opel in Germany.