Hydrogen-moderated self-regulating nuclear power module
Last updated
The hydrogen-moderated self-regulating nuclear power module (HPM), also referred to as the compact self-regulating transportable reactor (ComStar),[1] is a type of nuclear power reactor using hydride as a neutron moderator. The design is inherently safe,[2] as the fuel and the neutron moderator is uranium hydride UH3, which is reduced at high temperatures (500–800°C) to uranium and hydrogen. The gaseous hydrogen exits the core, being absorbed by hydrogen absorbing material such as depleted uranium, thus making it less critical. This means that with rising temperature the neutron moderation drops and the nuclear fission reaction in the core is dampened, leading to a lower core temperature. This means as more energy is taken out of the core the moderation rises and the fission process is stoked to produce more heat.
The concept for this type of nuclear reactor was developed by the scientists Otis Peterson and Robert Kimpland of the Los Alamos National Laboratory (LANL) in New Mexico.[3] Dr. Otis G. Peterson received a Federal Laboratory Consortium Award in the notable technology development category for this reactor concept in 2002.[4] This technology has since been licensed exclusively to Hyperion Power Generation, under a technology-transfer program and a co-operative research and development agreement (CRADA) with the Los Alamos National Laboratory.
The reactor shares some characteristics with the TRIGA research reactors, which are operated by research laboratories and universities around the world, as well as the SNAP-10A reactor, which was developed for space applications.
Schematic diagram of an HPM
Characteristics
According to the patent application[5] the reactor design has some notable characteristics, that sets it apart from other reactor designs. It uses uranium hydride (UH3) "low-enriched" to 5%uranium-235—the remainder is uranium-238—as the nuclear fuel, rather than the usual metallic uranium or uranium dioxide that composes the fuel rods of contemporary light-water reactors. In fact, within the application, the contemporary "rod" based design with fuel rods and control rods is completely omitted from the proposed reactor design in favor of a "tub" design with passive heat pipes conducting heat to the heat exchanger running through the "tub" of granulated uranium hydride. The likely coolant to be used is potassium.
The reactor design in question begins producing power when hydrogen gas at a sufficient temperature and pressure is admitted to the core (made up of granulated uranium metal) and reacts with the uranium metal to form uranium hydride. Uranium hydride is both a nuclear fuel and a neutron moderator; apparently it, like other neutron moderators, will slow neutrons sufficiently to allow for fission reactions to take place; the U-235 atoms within the hydride also serve as the nuclear fuel. Once the nuclear reaction has started, it will continue until it reaches a certain temperature, approximately 800°C (1,500°F), where, due to the chemical properties of uranium hydride, it chemically decomposes and turns into hydrogen gas and uranium metal. The loss of neutron moderation due to the chemical decomposition of the uranium hydride will consequently slow—and eventually halt—the reaction. When temperature returns to an acceptable level, the hydrogen will again combine with the uranium metal, forming uranium hydride, restoring moderation and the nuclear reaction will start again.
This makes the reactor a self-regulating, dynamic system, as with a rise in temperature, nuclear reactivity will substantially decrease, and with a fall in temperature, nuclear reactivity will substantially increase. Thus, this reactor design is self-regulating, meltdown is impossible, and the design is inherently safe. From a safety point of view, the design leverages the technology used in the TRIGA reactor, which uses uranium zirconium hydride (UZrH) fuel and is the only reactor licensed by the U.S. Nuclear Regulatory Commission for unattended operation.
According to the reactor design specification, the uranium hydride core is surrounded by hydrogen-absorbing storage trays, made of depleted uranium or thorium. The storage trays can either desorb or absorb the hydrogen gas from the core. During normal operation (with the operating temperature being approximately 550°C (1,000°F)), the storage trays are kept at a temperature high enough to expel the hydrogen gas to the core. The storage trays are heated or cooled by means of heat pipes and an external thermal source. Thus, in a steady state, the uranium hydride core is slaved to the temperature of the storage trays. Other heat pipes, protruding from the uranium hydride core, deliver the nuclear generated heat from the core to a heat exchanger, which in turn can be connected to a steam turbine-generator set, for the production of electricity.
The only hazards are those of all nuclear materials, namely those of radiation, but this is significantly mitigated by the fact that the reactor design is intended to be buried underground and only dug up for refueling every five years, at which point, assuming proper safeguards are used, exposure to radioactivity is a comparatively trivial concern. Spent fuel is also a concern, but this is mitigated due to certain technologies and advantages that make the design in question's used fuel more suitable for nuclear recycling. In particular, the patent application for the design indicates that using a thorium fuel cycle instead of a uranium fuel cycle with this type of reactor will allow far greater recycling potential than presently is found in standard used fuel. Furthermore, the uranium hydride has the capability of a high fuel burnup, of up to 50%, in contrast to a light-water reactor which usually achieves a burnup of 5%.
Reprocessing of spent fuel is simplified and more economical for the hydride reactor design, because the so-called process of zone refining can be used for separation.[6]
Apparently, the proposed reactor design will be capable of supplying 27 MWe of electric power or 70 MWth, weigh 18–20tons, measure approximately 1.5meters in diameter, be mass-produced on an assembly line, and be capable of unattended, unrefueled operation for up to seven to ten years at a time. Costs are projected to be competitive with other established sources of energy, like coal, conventional nuclear, and natural gas.
No prototype of this type of reactor has been realized yet, although the nuclear processes have been modeled with MCNP. As the concept of a uranium hydride reactor is novel, further experimental work will be needed with regard to gas flow dynamics, materials selection and performance (especially with regard to hydrogen embrittlement and hydride pyrophoricity), radiation damage and fission fragment buildup. A further challenge will be posed by the remote temperature control of the storage trays as well as cooling these trays when it may be necessary, so they absorb hydrogen from the core (absorption itself releases heat which first must be evacuated before more hydrogen can be absorbed by the storage trays).
History
The HPM concept is based on work from the 1950s, when the University of California Radiation Laboratory (currently the Lawrence Livermore National Laboratory) required a small nuclear fission device as the ignition charge for a thermonuclear weapon. The aim was to produce an explosion powerful enough to ignite it, while using only the minimum amount of fissile material. This was tried in operation Upshot–Knothole,[7] where hydrogen was used to reduce the critical mass. The test explosions codenamed Ruth and Ray used in the core uranium hydride. Ruth used the hydrogen isotope protium (1H) and Ray used the hydrogen isotope deuterium (2H or 2D) as neutron moderators. The predicted yield was 1.5 to 3 kt TNT for Ruth and 0.5-1 kt TNT for Ray, however the tests produced only a yield of about 200 tons of TNT.
Commercialization
The HPM technology is being developed and commercialized by Hyperion Power Generation, Inc. Hyperion is targeting the volume market for small to medium-sized applications in remote areas for industrial installations and residential installations serving 20,000 (typical US) to 100,000 (typical non-US) households. They claim the unit will be deliverable in a sealed container and will be mostly maintenance free, as the unit is not to be opened on site. The company wants to mass-produce the units in a factory, deliver them by truck and take them back for re-processing after 5 to 10 years (depending on power drain).[citation needed]
However, in November 2009, Hyperion Power Generation decided to use a different lead-cooled fast reactor design for its power module, based on uranium nitride, citing the long development and regulatory licensing process for the uranium hydride reactor design.[8]
Hyperion, then rebranded as Gen4 Energy, went out of business on the 1st of April 2018, after losing out on a second round of grants from the Department of Energy in January 2016.
Related Research Articles
A nuclear reactor is a device used to initiate and control a fission nuclear chain reaction or nuclear fusion reactions. Nuclear reactors are used at nuclear power plants for electricity generation and in nuclear marine propulsion. Heat from nuclear fission is passed to a working fluid, which in turn runs through steam turbines. These either drive a ship's propellers or turn electrical generators' shafts. Nuclear generated steam in principle can be used for industrial process heat or for district heating. Some reactors are used to produce isotopes for medical and industrial use, or for production of weapons-grade plutonium. As of 2022, the International Atomic Energy Agency reports there are 422 nuclear power reactors and 223 nuclear research reactors in operation around the world.
A pressurized water reactor (PWR) is a type of light-water nuclear reactor. PWRs constitute the large majority of the world's nuclear power plants. In a PWR, the primary coolant (water) is pumped under high pressure to the reactor core where it is heated by the energy released by the fission of atoms. The heated, high pressure water then flows to a steam generator, where it transfers its thermal energy to lower pressure water of a secondary system where steam is generated. The steam then drives turbines, which spin an electric generator. In contrast to a boiling water reactor (BWR), pressure in the primary coolant loop prevents the water from boiling within the reactor. All light-water reactors use ordinary water as both coolant and neutron moderator. Most use anywhere from two to four vertically mounted steam generators; VVER reactors use horizontal steam generators.
The pebble-bed reactor (PBR) is a design for a graphite-moderated, gas-cooled nuclear reactor. It is a type of very-high-temperature reactor (VHTR), one of the six classes of nuclear reactors in the Generation IV initiative.
A nuclear meltdown is a severe nuclear reactor accident that results in core damage from overheating. The term nuclear meltdown is not officially defined by the International Atomic Energy Agency or by the United States Nuclear Regulatory Commission. It has been defined to mean the accidental melting of the core of a nuclear reactor, however, and is in common usage a reference to the core's either complete or partial collapse.
In nuclear engineering, a neutron moderator is a medium that reduces the speed of fast neutrons, ideally without capturing any, leaving them as thermal neutrons with only minimal (thermal) kinetic energy. These thermal neutrons are immensely more susceptible than fast neutrons to propagate a nuclear chain reaction of uranium-235 or other fissile isotope by colliding with their atomic nucleus.
A loss-of-coolant accident (LOCA) is a mode of failure for a nuclear reactor; if not managed effectively, the results of a LOCA could result in reactor core damage. Each nuclear plant's emergency core cooling system (ECCS) exists specifically to deal with a LOCA.
The light-water reactor (LWR) is a type of thermal-neutron reactor that uses normal water, as opposed to heavy water, as both its coolant and neutron moderator; furthermore a solid form of fissile elements is used as fuel. Thermal-neutron reactors are the most common type of nuclear reactor, and light-water reactors are the most common type of thermal-neutron reactor.
Nuclear fuel is material used in nuclear power stations to produce heat to power turbines. Heat is created when nuclear fuel undergoes nuclear fission.
A high-temperature gas-cooled reactor (HTGR), is a nuclear reactor that uses a graphite moderator with a once-through uranium fuel cycle. The HTGR is a type of high-temperature reactor (HTR) that can conceptually have an outlet temperature of 750 °C (1,380 °F). The reactor core can be either a "prismatic block" or a "pebble-bed" core. The high temperatures enable applications such as process heat or hydrogen production via the thermochemical sulfur–iodine cycle.
The gas-cooled fast reactor (GFR) system is a nuclear reactor design which is currently in development. Classed as a Generation IV reactor, it features a fast-neutron spectrum and closed fuel cycle for efficient conversion of fertile uranium and management of actinides. The reference reactor design is a helium-cooled system operating with an outlet temperature of 850 °C using a direct Brayton closed-cycle gas turbine for high thermal efficiency. Several fuel forms are being considered for their potential to operate at very high temperatures and to ensure an excellent retention of fission products: composite ceramic fuel, advanced fuel particles, or ceramic clad elements of actinide compounds. Core configurations are being considered based on pin- or plate-based fuel assemblies or prismatic blocks, which allows for better coolant circulation than traditional fuel assemblies.
A nuclear reactor core is the portion of a nuclear reactor containing the nuclear fuel components where the nuclear reactions take place and the heat is generated. Typically, the fuel will be low-enriched uranium contained in thousands of individual fuel pins. The core also contains structural components, the means to both moderate the neutrons and control the reaction, and the means to transfer the heat from the fuel to where it is required, outside the core.
A sodium-cooled fast reactor is a fast neutron reactor cooled by liquid sodium.
Nuclear reactor physics is the field of physics that studies and deals with the applied study and engineering applications of chain reaction to induce a controlled rate of fission in a nuclear reactor for the production of energy. Most nuclear reactors use a chain reaction to induce a controlled rate of nuclear fission in fissile material, releasing both energy and free neutrons. A reactor consists of an assembly of nuclear fuel, usually surrounded by a neutron moderator such as regular water, heavy water, graphite, or zirconium hydride, and fitted with mechanisms such as control rods which control the rate of the reaction.
The Whiteshell Reactor No. 1, or WR-1, was a Canadian research reactor located at AECL's Whiteshell Laboratories (WNRL) in Manitoba. Originally known as Organic-Cooled Deuterium-Reactor Experiment (OCDRE), it was built to test the concept of a CANDU-type reactor that replaced the heavy water coolant with an oil substance. This had a number of potential advantages in terms of cost and efficiency.
The liquid fluoride thorium reactor is a type of molten salt reactor. LFTRs use the thorium fuel cycle with a fluoride-based molten (liquid) salt for fuel. In a typical design, the liquid is pumped between a critical core and an external heat exchanger where the heat is transferred to a nonradioactive secondary salt. The secondary salt then transfers its heat to a steam turbine or closed-cycle gas turbine.
Uranium hydride, also called uranium trihydride (UH3), is an inorganic compound and a hydride of uranium.
Nuclear gas-core-reactor rockets can provide much higher specific impulse than solid core nuclear rockets because their temperature limitations are in the nozzle and core wall structural temperatures, which are distanced from the hottest regions of the gas core. Consequently, nuclear gas core reactors can provide much higher temperatures to the propellant. Solid core nuclear thermal rockets can develop higher specific impulse than conventional chemical rockets due to the low molecular weight of a hydrogen propellant, but their operating temperatures are limited by the maximum temperature of the solid core because the reactor's temperatures cannot rise above its components' lowest melting temperature.
A pressurized heavy-water reactor (PHWR) is a nuclear reactor that uses heavy water (deuterium oxide D2O) as its coolant and neutron moderator. PHWRs frequently use natural uranium as fuel, but sometimes also use very low enriched uranium. The heavy water coolant is kept under pressure to avoid boiling, allowing it to reach higher temperature (mostly) without forming steam bubbles, exactly as for a pressurized water reactor. While heavy water is very expensive to isolate from ordinary water (often referred to as light water in contrast to heavy water), its low absorption of neutrons greatly increases the neutron economy of the reactor, avoiding the need for enriched fuel. The high cost of the heavy water is offset by the lowered cost of using natural uranium and/or alternative fuel cycles. As of the beginning of 2001, 31 PHWRs were in operation, having a total capacity of 16.5 GW(e), representing roughly 7.76% by number and 4.7% by generating capacity of all current operating reactors.
The Integral Molten Salt Reactor (IMSR) is a nuclear power plant design targeted at developing a commercial product for the small modular reactor (SMR) market. It employs molten salt reactor technology which is being developed by the Canadian company Terrestrial Energy. It is based closely on the denatured molten salt reactor (DMSR), a reactor design from Oak Ridge National Laboratory. It also incorporates elements found in the SmAHTR, a later design from the same laboratory. The IMSR belongs to the DMSR class of molten salt reactors (MSR) and hence is a "burner" reactor that employs a liquid fuel rather than a conventional solid fuel; this liquid contains the nuclear fuel and also serves as primary coolant.
An organic nuclear reactor, or organic cooled reactor (OCR), is a type of nuclear reactor that uses some form of organic fluid, typically a hydrocarbon substance like polychlorinated biphenyl (PCB), for cooling and sometimes as a neutron moderator as well.
References
↑ Los Alamos National Laboratory Technical Report Nos. LA-UR-03-5170 (2003) and LA-UR-04-1087 (2004)
↑ Hyperion Power Generation Slides for NRC Pre-Application Meeting, 22 August 2007: U.S. NRC Agencywide Documents Access and Management System (ADAMS) Document ML072340518
Otis Peterson (January 1, 2009). "High hopes for hydride". Nuclear Engineering International. Global Trade Media. Archived from the original on October 9, 2009. Retrieved 2009-10-18.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
