The M80 Ring Road (also known simply as the Ring Road or by the names of its constituent parts; the Western Ring Road[2] and the Metropolitan Ring Road[3]) is a partially complete urban freewayring road around Melbourne, Australia. This article will deal with the entire length of the corridor for sake of completion, as well to avoid confusion between declarations.
A series of major upgrades along the entire route commenced in 2009, including widening and a Freeway Management System; the most recent section between Sydney and Edgars Roads commenced construction in 2020 and was completed in 2022, one year ahead of schedule.[5]
The North East Link is currently under construction to link the Greensborough Bypass, the north-eastern end of the Ring Road, with the Eastern Freeway, completing the "missing link" between them and having a freeway-standard ring road encircle Melbourne from Laverton North in the south-western suburbs to Frankston in the south-eastern suburbs.[6]
Route
EJ Whitten Bridge
The Western Ring Road officially begins at the West Gate Interchange in Laverton North, with ramps to and from the West Gate Freeway, Princes Freeway and Geelong Road, and heads north as a six-lane dual-carriageway until the Western Freeway/Fitzgerald Road interchange, widening to eight lanes and heading north-east, widening again to ten lanes at the Sunshine Avenue/McIntyre Road interchange and crossing the Maribyrnong River over the EJ Whitten Bridge (named after Australian rules football player Ted Whitten. The freeway narrows to eight lanes at the Calder Freeway interchange, then narrowing further to six lanes at the Dalton Road interchange, and again to four lanes at the Plenty Road interchange, before terminating at the Greensborough Bypass in Greensborough.
The road has a non-peak speed limit of 100km/h for almost its entire length; between Greensborough Bypass and Plenty Road, the speed limit drops to 80km/h (formerly 90km/h before freeway works completed). The Western Ring Road between the Western Highway and the Tullamarine Freeway was previously configured with variable speed limits, which can vary between 60km/h and 100km/h depending upon traffic conditions. As of the 2009-2023 upgrades, all upgraded sections now feature a Freeway Management System (similar to the system in place on the M1 corridor) which provide more detailed information to drivers (including variable speed limits) and has replaced the previous variable speed limit system between Ballarat Road (the current name for the previous Western Highway) and the Tullamarine Freeway.
Standard travel time for the M80 Ring Road is 25 minutes (17 minutes on the Western Ring Road and 8 minutes on the Metropolitan Ring Road) in both directions. However, peak period freeway travel times typically vary between 30 and 45 minutes in each direction, unless there are significant incidents, which can stretch travel times from 50 minutes to beyond one hour.
History
The Ring Road project was proposed as part of the 1969 Melbourne Transportation Plan (F3, F5 & F7 Freeway corridors) and has documented in almost every edition of the Melway street directory since that time. Construction of the Western Ring Road began in February 1989 with work on the Broadmeadows section,[7] and was completed with the final link between the Calder and Tullamarine Freeways. Under the Keating government, a total $555 million was provided by the Federal Government for the Western Ring Road, with a $76 million contribution from the Victorian Government.[8]
Western Ring Road at Keilor Park
The project is officially divided into two sections:[2][3][9]
Metropolitan Ring Road: the section between Hume Highway and Greensborough Bypass. The section between Greenborough Bypass and Plenty Road was originally called Northern Ring Road upon opening in April 1994, but was changed when the Plenty Road to Dalton Road section opened in November 1996, referred to since by VicRoads as the Metropolitan Ring Road.[8]
Completed in stages, the freeway opened to traffic as follows:
1992 – Broadmeadows section (Stage 1, Tullamarine Freeway to Pascoe Vale Road), opened to traffic on 20 September 1992.[7][10]
1993 – Broadmeadows section (Stage 2, Pascoe Vale Road to Sydney Road), opened to traffic on 7 July 1993; this section includes the Jacana Tunnel, which won an Excellence Award in the Public Works category awards by the Institution of Engineers Australia.[11]
1994 – Greenborough Bypass to Plenty Road, 2.5 km section opened April 1994 (as "Northern Ring Road"), at a cost of $15.5 million.[11]
1995 – Maribyrnong section (Ballarat Road to Keilor Park Drive), opened July 1995,[4] with the official opening of EJ Whitten Bridge by Premier of VictoriaJeff Kennett on 18 August 1995.[12]
1996 – Ardeer section (Boundary Road to Ballarat Road), opened 6 March 1996.[12]
1996 – West Gate/Princes Freeway interchange to Boundary Road, opened October 1996.[8]
1996 – Dalton Road to Plenty Road, opened on 28 November 1996, at a cost of $28.8 million.[8]
1996 – Keilor Park Drive to Calder Freeway, opened December 1996.[8]
1997 – Calder Freeway to Tullamarine Freeway, the final section of the Western Ring Road (from the West Gate/Princes Highway interchange to Hume Highway (now Sydney Road)), opened 5 June 1997.[8]
1999 – Sydney Road to Dalton Road, the final 6km section of the Metropolitan Ring Road (from Hume Highway (now Sydney Road) to Greensborough Bypass) opened 20 August 1999, at a cost of $140 million.[13]
The freeway was designated Ring Road 80 when its first stage opened, quickly replaced by Metropolitan Route 80 in 1992, and extended across successive stages as they opened. With Victoria's conversion to the newer alphanumeric system in the late 1990s, this was updated to M80 in 1997 (for the sections not declared a National Highway).[14]
The Whitlam government introduced the federal National Roads Act 1974,[15] where roads declared as a National Highway were still the responsibility of the states for road construction and maintenance, but were fully compensated by the Federal government for money spent on approved projects.[15]:S7 As an important connecting road between other National Highways linking to the capitals of New South Wales and South Australia, a portion of the Western Ring Road between the Hume and Western Highways was declared a National Highway in 1993 - parts of which were yet to be built at the time - allowing for direct Federal funding of its construction.[11] Once opened, this section was signed with a National Highway M80 shield, later extended east to the junction with the Hume Freeway when the Craigieburn bypass opened in 2005, and extended south to the junction with the Western Freeway when the Deer Park bypass opened in 2009. It was later changed to a plain route M80 sign in 2013, for continuity with the rest of the freeway and to complement all infrastructure and signage[16] during the 2009 to 2014 upgrade, although old signage still exists and has not yet been replaced.
The passing of the Road Management Act 2004[17] granted the responsibility of overall management and development of Victoria's major arterial roads to VicRoads: in 2004, VicRoads re-declared Western Ring Road (Freeway #1900) from Laverton North to Hume Highway in Fawkner,[2] and Metropolitan Ring Road (Freeway #1880) from Hume Highway in Fawkner to Greensborough Bypass in Greensborough;[3] however sign-posting (and VicRoads' own Declared Roads website[18]) subsequently state the name changes at the interchange with the Hume Freeway. From the upgrades beginning in 2009 onwards, it has been more common for both sections to be referred to as M80 Ring Road or simply the Ring Road, with newer signage and government websites increasingly reflecting this.[19]
An eastern extension to the Metropolitan Ring Road (the "missing link" to complete the ring road), tunnelling under Greensborough and through the Banyule Flats, to connect to Eastern Freeway at Bulleen, has now started construction as the North East Link project.
Initial upgrading and widening works of the Western and Metropolitan Ring Roads was carried out between 2009 and 2014, funded by the Federal Government Auslink 2 program.[needs update][20]VicRoads had originally produced an official "M80 Upgrade Website" with links to a newly created site showing video simulations, maps and scheduled traffic disruptions on the freeway, for already- or nearly-completed sections. The website was revamped when Major Road Projects Victoria, established in 2019, took over management of the project.[21]
The entire length of the Freeway is being upgraded, within individual sections over a number of years. Initial work started in 2009 and work on some sections were completed in 2014.[when?] Along with the $2.25 billion upgrade, is a new 'Freeway Management System' that includes Ramp Signals (Traffic Lights located within on-ramps), overhead lane signs (electronic variable speed limits and lane symbols) & overhead electronic message boards; along with various new CCTV cameras and 'intelligent' sensors underground (to detect freeway congestion for signals). The entire upgrade is being jointly funded by the State and Federal governments, being fully controlled. managed and operated by VicRoads. This is the most major and expensive road upgrade in Victoria, since the M1 (Monash Freeway / Citylink) upgrade was completed in 2007/2008.
In late 2009, construction began on the upgrade and widening of 38 kilometres (24mi) of the M80 from Princes Freeway at Laverton North to the Greensborough Highway at Greensborough. The first stage involved widening the 9.7km (6.0mi) stretch from Calder Freeway to Sydney Road from 6 to 8 lanes,[22] and was completed in May 2013.[21] Construction on the Western Highway to Sunshine Avenue section was completed in August 2013.[21] Construction on the Edgars Road to Plenty Road section was completed in April 2014.[21] Upgrades of the Princes Freeway to Western Freeway section were expected to commence from 2015 onwards as part of the western section of the East West Link, however the project was cancelled with a change of government at the 2014 state election.
In mid 2015 to early 2016, the state and federal governments had announced A$300million in funding to upgrade the remaining sections along the ring road, previously allocated to the cancelled East West Link road project. Construction on the Sunshine Avenue to Calder Freeway section was completed in September 2018.[21] The upgrade of the Sydney Road to Edgars Road section started construction in 2020 and was completed in May 2022.[23]
Remaining upgrades
The upgrade of the Plenty Road to Greensborough Highway section will be included as part of the North East Link project, which is expected to be commence construction in 2024 and be completed in 2028. The Princes Freeway to Western Freeway section is the last remaining section to be upgraded, however no funding has been allocated for construction. Minor upgrades to the Princes Freeway interchange are underway as part of the West Gate Tunnel project, having commenced construction in 2019 and a delayed completion in 2025.
A panorama of the M80 Western ring road eastern off ramp at Sydney Road in Fawkner, Melbourne
Currently, the easternmost point of the Metropolitan Ring Road terminates at Greensborough at the Greensborough Bypass. There have been numerous proposals to extend it to the Eastern Freeway, and thus complete the "missing link" in a freeway-standard ring road around Melbourne, starting from Laverton North and ending in Frankston. The resulting ring road will be similar to the size and scope of Sydney's Orbital Motorway and would enable traffic to transit between the Hume and Calder Highways and Melbourne's outer east without having to cross Melbourne's inner suburbs.
If the road is built, it would run through areas that are environmentally and politically sensitive, such as Viewbank, Banyule Flats, Eltham, Templestowe or Warrandyte. A link to the east was previously considered using the proposed tunnel to connect the Eastern Freeway with Melbourne's west, before its cancellation.
Another possible route for the freeway has been suggested that would result in existing transmission line corridors being utilised.[24] The official reservation for the extension ends at Ryans Road in Eltham North, but these transmission line corridors could be used to carry the freeway through to Eastlink in Ringwood. Environmental impacts would still be a problem including noise, pollution, possible destruction of vegetation and the interruption of wildlife crossings. Less opposition from local politicians and the public would be likely if the much more expensive option of tunnelling is chosen.
On 7 July 2008 it was announced by then Premier John Brumby that the completion of the missing section was again being considered by the Victorian State Government as part of a wider plan to deal with Melbourne's traffic problems.[25] A new freeway through some of the city's most environmentally sensitive areas is among a series of proposals considered in the plan. Environmental concerns about building the road through the green wedge and the disruption of communities in the area have been raised.
In December 2016, Premier Daniel Andrews announced plans for extending the freeway. The project is expected to cost around $10 billion. In May 2016, Infrastructure Victoria released its new consultancy options assessment report,[26] a preferred route was selected in 2017, early construction began in 2020, and major construction began in late 2022, for a proposed completion by 2027/28.[6]
Much controversy surrounds the Metropolitan Ring Road project in Melbourne in many different topics including; environmental, economical, social, private & public transportation and both positive and negative aspects are well represented for each topic by many people and groups small and large. This has led to heavy debate in all areas of society in Melbourne from political and media to general public views and conversations.
The road serves various uses:
integrating the metropolitan area by linking middle and outer suburbs
assisting circumferential travel through the middle suburbs as opportunities for cross town movement are limited
linking the growing populations in the south-east and west suburbs to jobs and economic opportunities throughout the metropolitan area
providing access to Melbourne Airport, the ports of Melbourne and Geelong, and rail freight terminals, from all parts of Melbourne and from across the State
provide good access to the whole of the Melbourne metropolitan area to and from country Victoria and interstate.
Hume Highway, inclusive of the sections now known as Hume Freeway and Hume Motorway, is one of Australia's major inter-city national highways, running for 840 kilometres (520 mi) between Melbourne in the southwest and Sydney in the northeast. Upgrading of the route from Sydney's outskirts to Melbourne's outskirts to dual carriageway was completed on 7 August 2013.
Princes Highway is a major road in Australia, extending from Sydney via Melbourne to Adelaide through the states of New South Wales, Victoria and South Australia. It has a length of 1,941 kilometres (1,206 mi) or 1,898 kilometres (1,179 mi) via the former alignments of the highway, although these routes are slower and connections to the bypassed sections of the original route are poor in many cases.
CityLink is a network of tollways in Melbourne, Victoria, Australia, linking the Tullamarine, West Gate and Monash Freeways and incorporating Bolte Bridge, Burnley Tunnel and other works. In 1996, Transurban was awarded the contract to augment two existing freeways and construct two new toll roads – labelled the Western and Southern Links – directly linking a number of existing freeways to provide a continuous, high-capacity road route to, and around, the central business district. CityLink uses a free-flow tolling electronic toll collection system, called e-TAG. CityLink is currently maintained by Lendlease Services.
Melton Highway links Melbourne's outer north-western suburbs of Melton and Taylors Lakes, connecting the Western Freeway and Calder Freeway to provide a more-direct route between Ballarat and Melbourne and Essendon airports; it has a Victorian route designation of C754.
The West Gate Freeway is a major freeway in Melbourne, the busiest urban freeway and the busiest road in Australia, carrying upwards of 200,000 vehicles per day. It links Geelong and Melbourne's western suburbs to central Melbourne and beyond. It is also a link between Melbourne and the west and linking industrial and residential areas west of the Yarra River with the city and port areas. The West Gate Bridge is a part of the freeway.
The Tullamarine Freeway, is a major urban freeway in Melbourne, Victoria, Australia, linking Melbourne Airport to the Melbourne City Centre. It carries up to 210,000 vehicles per day and is one of Australia's busiest freeways. The entire stretch of the Tullamarine Freeway bears the designation M2.
The Monash Freeway is a major urban freeway in Victoria, Australia, linking Melbourne's CBD to its south-eastern suburbs and beyond to the Gippsland region. It carries up to 180,000 vehicles per day and is one of Australia's busiest freeways. The entire stretch of the Monash Freeway bears the designation M1.
The Eastern Freeway is an urban freeway in eastern Melbourne, the state capital of Victoria, Australia. It is one of the most important freeways in terms of commuting to the city, connecting Alexandra Parade and Hoddle Street in the inner suburbs, with EastLink tollway farther east. It consists of between three and six lanes in each direction, also an inbound transit lane reserved for vehicles with two or more occupants during peak hours.
Calder Highway is a rural highway in Australia, linking Mildura and the Victoria/New South Wales border to Bendigo, in North Central Victoria. South of Bendigo, where the former highway has been upgraded to freeway-standard, Calder Freeway links to Melbourne, subsuming former alignments of Calder Highway; the Victorian Government completed the conversion to freeway standard from Melbourne to Bendigo on 20 April 2009.
Princes Freeway is a 159-kilometre (99 mi) Australian freeway, divided into two sections, both located in Victoria, Australia. The freeway links Melbourne to Geelong in the west, and to Morwell in the east. It continues beyond these extremities as the Princes Highway towards Adelaide to the west and Sydney to the northeast. The freeway bears the designation M1.
The Western Highway is the Victorian part of the principal route linking the Australian cities of Melbourne and Adelaide, with a length of approximately 258 kilometres (160 mi) of single carriageway, then 161 kilometres (100 mi) of dual carriageway known as the Western Freeway. It is a part of the National Highway network and designated routes A8 and M8. The western end continues into South Australia as the Dukes Highway, the next section of the Melbourne–Adelaide National Highway. The Western Freeway joins Melbourne's freeway network via the Western Ring Road, in the western suburbs of Melbourne.
Goulburn Valley Highway is a highway located in Victoria, Australia. The section north of the Hume Freeway is part of the Melbourne to Brisbane National Highway and is the main link between these two cities as well as a major link between Victoria and inland New South Wales. It is also the most direct route between Melbourne and the major regional centre of Shepparton in Victoria.
Greensborough Highway is a highway in the north-eastern suburbs of Melbourne, Australia, and is an important route for north-east Melbourne. This name is not widely known to most drivers, as the entire allocation is still best known as by the names of its constituent parts: Lower Heidelberg Road, Rosanna Road, Lower Plenty Road, Greensborough Road and Greensborough Bypass. This article will deal with the entire length of the corridor for sake of completion, as well to avoid confusion between declarations.
Sydney Bypass refers to a number of roads, existing and proposed, that motorists can use to avoid the congested approaches to the Sydney central business district (CBD). The main bypasses are:
State (Bell/Springvale) Highway, also known as Bell Street/Springvale Road State Highway, is the longest self-contained urban highway in Melbourne, Australia, linking Tullamarine Freeway and Nepean Highway through Melbourne's north-eastern suburbs. These names are not widely known to most drivers, as the entire allocation is still best known as by the names of its constituent parts : Bell Street, Banksia Street, Manningham Road, Williamsons Road, Doncaster Road, Mitcham Road, Springvale Road and Edithvale Road. This article will deal with the entire length of the corridor for sake of completeness, as well to avoid confusion between declarations.
Ballarat Road is a major urban arterial road in the western suburbs of Melbourne, Victoria, Australia.
The 1969 Melbourne Transportation Plan was a road and rail transport plan for Melbourne, the state capital of Victoria, Australia, instituted by Henry Bolte's state government. Most prominently, the plan recommended the provision of an extensive freeway network, much of which has since been built.
Airport Drive is a 5.7 kilometre highway in Melbourne, Australia, linking Centre Road at Melbourne Airport with the M80 Ring Road at Airport West. This road is an important thoroughfare for the adjacent Melbourne Airport Business Park along South Centre Road, and acts as an alternative access road to Tullamarine Freeway.
↑ VicRoads (September 2013). "Direction Signs and Route Numbering (non-Freeway)". Traffic Engineering Manual (3ed.). State Government of Victoria. p.34. Archived from the original(PDF) on 19 December 2014. The use of National Highway shields for routes M/A8, A20, M31, M/A39 and M80 has been discontinued. They are now signed in the same way as other alphanumeric routes
↑ State Government of Victoria. "Road Management Act 2004"(PDF). Government of Victoria. Archived(PDF) from the original on 18 October 2021. Retrieved 19 October 2021.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
M80 (1997–present)
Tourist Route 21
Greensborough Bypass 
