This article has multiple issues. Please help improve it or discuss these issues on the talk page . (Learn how and when to remove these messages)
|
Noise regulation includes statutes or guidelines relating to sound transmission established by national, state or provincial and municipal levels of government. After the watershed passage of the United States Noise Control Act of 1972, [2] other local and state governments passed further regulations.
A noise regulation[ citation needed ] restricts the amount of noise, the duration of noise and the source of noise. It usually places restrictions for certain times of the day. [3]
Although the United Kingdom and Japan enacted national laws in 1960 and 1967 respectively, these laws were not at all comprehensive or fully enforceable as to address generally rising ambient noise, enforceable numerical source limits on aircraft and motor vehicles or comprehensive directives to local government. Accordingly, Greece established in 1996 according to Police Order 3 the hours of common quiet 15:00 to 17:30 and from 23:00 to 07:00 in the summer season and 15:30 to 17:30 and from 22:00 until 07:30. [4]
Quiet hours are times during a day or night when there are placed tighter restrictions on unnecessary or bothersome noise. They vary between jurisdictions and areas, but are typically in place during night-time, for example between 23:00 and 07:00, [5] so as not to interfere with residents sleep. Some noise measurement standards which takes into account different times of the day are the American day-night average sound level (Ldn) standard or the European day–evening–night noise level (Lden) standard. Some jurisdictions also have wider noise restrictions in the weekends or on certain public holidays. Industrial or nightlife areas may be exempt or have fewer restrictions, while private institutions, hotels and universities may place additional restrictions on their guests.
In the 1960s and earlier, few people recognized that citizens might be entitled to be protected from adverse sound level exposure. Most concerted actions consisted of citizens groups organized to oppose a specific highway or airport, and occasionally a nuisance lawsuit would arise. Things in the United States changed rapidly with passage of the National Environmental Policy Act (NEPA) in 1969 and the Noise Pollution and Abatement Act, more commonly called the Noise Control Act (NCA), in 1972. Passage of the NCA was remarkable considering the lack of historic organized citizen concern. However, the United States Environmental Protection Agency (EPA) had testified before Congress that 30 million Americans are exposed to non-occupational noise high enough to cause hearing loss and 44 million Americans live in homes impacted by aircraft or highway noise. [6] [7] [8] [9]
NEPA requires all federally funded major actions to be analyzed for all physical environmental impacts including noise pollution, and the NCA directed the EPA to promulgate regulations for a host of noise emissions. Many city ordinances prohibit sound above a threshold intensity from trespassing over property line at night, typically between 9 p.m. to 7 a.m., and during the day restricts it to a higher sound level; however, enforcement is uneven. Many municipalities do not follow up on complaints. Even where a municipality has an enforcement office, it may only be willing to issue warnings, since taking offenders to court is expensive. A notable exception to this rule is the City of Portland, Oregon, which has instituted an aggressive protection for its citizens with fines reaching as high at $5000 per infraction, with the ability to cite a responsible noise violator multiple times in a single day. [10]
Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA's role is to ensure these conditions for America's working men and women by setting and enforcing standards, and providing training, education and assistance. The same Act charges the National Institute for Occupational Safety and Health (NIOSH) with recommending occupational safety and health standards. NIOSH communicates these recommended standards to regulatory agencies (including OSHA) and to others in the occupational safety and health community through the publication and dissemination of Criteria Documents such as the Criteria for A Recommended Standard - Occupational Noise Exposure. [11]
Initially these laws had a significant effect on thoughtful study of transportation programs and also federally funded housing programs in the United States. They also gave states and cities an impetus to consider environmental noise in their planning and zoning decisions, and led to a host of statutes below the federal level. Awareness of the need for noise control was rising. In fact, by 1973 a national poll of 60,000 U.S. residents found that sixty percent of people considered street noise to have a "disturbing, harmful or dangerous" impact. [12]
This trend continued strongly throughout the 1970s in the U.S., with about half of the states and hundreds of cities passing substantive noise control laws. The EPA coordinated all federal noise control activities through its Office of Noise Abatement and Control. The EPA phased out the office's funding in 1982 as part of a shift in federal noise control policy to transfer the primary responsibility of regulating noise to state and local governments. However, the Noise Control Act of 1972 and the Quiet Communities Act of 1978 were never rescinded by Congress and remain in effect today, although essentially unfunded. [13]
The Federal Aviation Administration (FAA) regulates aircraft noise by specifying the maximum noise level that individual civil aircraft can emit through requiring aircraft to meet certain noise certification standards. These standards designate changes in maximum noise level requirements by "stage" designation. The U.S. noise standards are defined in the Code of Federal Regulations (CFR) Title 14 Part 36 – Noise Standards: Aircraft Type and Airworthiness Certification (14 CFR Part 36). The FAA also pursues a program of aircraft noise control in cooperation with the aviation community. [14]
The Federal Highway Administration (FHWA) developed noise regulations to control highway noise as required by the Federal-Aid Highway Act of 1970. The regulations requires promulgation of traffic noise-level criteria for various land use activities, and describe procedures for the abatement of highway traffic noise and construction noise. [15]
Nevertheless, some states continued to act. California carried out an ambitious plan to require its cities to establish a "Noise Element of the General Plan," which provides guidance for land planning decisions to minimize noise impacts on the public. Many cities throughout the U.S. also have noise ordinances, which specifies the allowable sound level that can cross property lines. These ordinances can be enforced with local police powers. [16]
Japan actually passed the first national noise control act, but its scope was much more limited than the U.S. law, addressing mainly workplace and construction noise. [17]
Several European countries emulated the U.S. national noise control law: Netherlands (1979), France (1985), Spain (1993), and Denmark (1994). In some cases unlegislated innovations have led to quieter products exceeding legal mandates (for example, hybrid vehicles or best available technology in washing machines). Environmental noise is a special definition in the European directive 2002/49/EC article 10.1.
Local ordinances are principally aimed at construction noise, power equipment operated by individuals and unmuffled industrial noise penetrating residential areas. Thousands of U.S. cities have prepared noise ordinances that give noise control officers and police the power to investigate noise complaints and enforcement power to abate the offending noise source, through shutdowns and fines. [16] In the 1970s and early 1980s there was even a professional association for noise enforcement officers called NANCO, "National Association of Noise Control Officials."
Today only a handful of properly trained Noise Control Officers remain in the United States. A typical noise ordinance sets forth clear definitions of acoustic nomenclature and defines categories of noise generation; then numerical standards are established, so that enforcement personnel can take the necessary steps of warnings, fines or other municipal police power to rectify unacceptable noise generation. Ordinances have achieved certain successes but they can be thorny to implement. Many European cities are still treating noise as the U.S. did in the 1960s, as a nuisance and not as a numerical standard to be achieved.[ citation needed ]
One obligation of a community is to protect its citizens from adverse environmental influences. Noise is one of these factors, Noise has documented effects on people, they can be divided into three types. The first type is a physical effect that directly and adversely effects a person's health. Hearing loss and vibration of bodily components are examples. The second type is a physiological effect that adversely effects a person's health; heightened blood pressure and general stress response are examples. The third type is psychological that adversely effects a person's welfare; examples are distraction, annoyance, and complaint. The only feasible legal basis for a community's right to control noise is based on these adverse health and welfare effects. It is clearly easier to uphold the constitutionality of a noise ordinance in a court of law if it can be shown that it is based on health and welfare concerns. The following is a short list of recognized effects of noise that can be addressed as a reason for a noise ordinance.
There are several fundamental issues that shape the legality, effectiveness and enforceability of any community noise regulation.
The federal government has preempted certain areas of noise regulation. They can be found in the Code of Federal Regulations under the EPA Noise Abatement Programs; [23] [24] Parts 201 to 205 and 211 cover railroads, motor carriers in interstate commerce, construction equipment, and motor vehicles. They require product labeling and prohibit tampering with noise control devices. Communities may enact regulations that are no more strict than the federal ones so that local enforcement can be carried out. They can enact curfews and restrict vehicle use in established zones such as residential. Any restriction on interstate motor carriers or railroads may NOT be for the purpose of noise control. States have police powers granted by the Constitution. They may also enact regulations that are no more strict than federal regulations. They may also preempt local ordinances. California [25] and New Jersey [26] have comprehensive noise codes that communities must meet. Many states required that local ordinances be no more strict than the state code whether such code exists or not. One relatively common preemption is protection of shooting ranges from noise regulation or litigation [27] and right to farm laws that protect agricultural areas from nuisance litigation by encroaching residential areas. [28]
In one state court case, [29] the court declared that numerical sound levels were constitutional as not void for vagueness, as the term plainly audible provided it was associated with a reasonable distance. Two requirements for a noise ordinance provision is that:
In one Supreme Court case [30] the court ruled that the specificity of the city ordinance regulating school verbal protests was not constitutionally vague, gave fair warning, and was not an invitation to arbitrary enforcement and so was not overbroad, despite the implied limitation on free speech.
Nuisance law applies to both community noise regulation as well as private suits brought to court to reduce noise impact.
Care must be taken in writing a subjective noise provision so that it overcomes the objections listed above. Care must be taken when writing an objective noise provision to make sure that the sound levels are physically realizable. For example, requiring the maximum sound level of an automobile to be 40 dB(A) or the maximum sound level in a residential zone to be 30 dB(A) opens the provision to an enforceability challenge.
Fixed sound sources must be treated differently than moving sources. In the former case, the listener is normally defined while for moving sources it is not. Historically, regulations were enforced by the subjective judgment of an enforcing officer. With the advent of sound measuring equipment, the judgment can be based on measured sound levels. Most comprehensive noise ordinances contain four types of provisions. [31]
Independence Day
Many communities have definitions that are local to them, such as those defining motor vehicles and sound levels and sound level measurements. Some that have been added to make noise enforcement more specific are listed here. [31]
A compression braking device installed on large motor vehicles to assist in reduction, or control, of vehicle speed. When activated, the engine converts from a power source to a power absorber by converting the engine into an air compressor.
Any device for the abatement of sound emission while permitting the transfer of gas. A muffler is considered to be in good working order if the sound reduction is equal to, or greater than, that of the original equipment.
Any sound or vibration which:
This can also be defined as noise nuisance.
Any location, exterior, or interior, to a building that regularly permits public entrance for entertainment purposes. For this purpose, “public” means citizens of all types, including but not limited to, children, and private or public employees.
Any sound for which the information content is unambiguously communicated to the listener, such as, but not limited to, understandable speech, comprehension of whether a voice is raised or normal, repetitive bass sounds, or comprehension of musical rhythms, without the aid of any listening device.
Any self-propelled airborne, water-borne, or land-borne, plane, vessel, or vehicle, which is not designed to carry persons, including, but not limited to, any model airplane, boat, car, or rocket.
An imaginary line along the ground surface, and its vertical extension, which separates the real property owned by one person from that owned by another person, but not including intra-building real property divisions.
Any device, instrument, mechanism, equipment or apparatus for the amplification of any sounds from any radio, phonograph, stereo, tape player, musical instrument, television, loudspeaker or other sound-making or sound-producing device or any device or apparatus for the reproduction or amplification of the human voice or other sound.
The minimum ground or structure borne vibrational motion necessary to cause a person of normal sensitivity to be aware of the motion through contact, hearing, or through visual observation of moving things.
there are three levels of regulation for stationary sound sources. The most basic is the general one associated with noise disturbance. (See Noise Disturbance below.) It is a very broad subjective immission control that has evolved from earlier disturbance of the peace provisions. Subjectivity can lead to arbitrary enforcement. The next level of regulation is less broad; it is an objective immission control that uses specific levels of sound considered to be a noise disturbance. Arbitrary enforcement is reduced. (See Maximum Permissible Sound Levels below.) In both cases, however, the person creating the sound may not be aware that his actions are in violation. The concept that a potential violator should have fair warning that his actions are in violation has led to provisions that address specific noise problems. The sections below list those that are found in community noise ordinances. [31]
This provision is a subjective immission control. An evaluation of the noise disturbance is made at the listener without a sound level meter. This provision is mostly applied in residential zones such as homes, apartments and condominiums. Albuquerque, NM (Article 9-9) requires that such units the maximum permissible sound levels (Se section below) and recommend that those units be placed away from other residential units or on roof tops to diminish impact.
Community control of airport created noise is limited to those sounds not related to flight operations. The community is able to control the land use around the airport however.
This provision is a subjective immission control. Most relate to barking dogs and put an upper time limit for continuous sound from them. New Jersey (Chapter 13:1G) considers a violation if the sound is continuous for more than 5 minutes or intermittent for more than 20 minutes. They also consider it a defense to violation if the animal is provoked to bark. Connecticut (Chapter 442)exempts animal sounds while Anchorage, AK (Chapter 15.70) requires that continual violations permit the animal to be taken and put out for adoption.
This provision contains only a curfew since most states protect shooting ranges from liability for noise disturbance. It can include a curfew requirement and a requirement for a public hearing if expansion of the range is desired. The provision may prohibit other weapons such as rocket propelled projectiles but may exempt unpowered weapons such as arrows. South Carolina (title 31 Chapter 18) requires that a sign stating SHOOTING RANGE-NOISE AREA be placed on all primary roads. Arizona (ARS 17-602) places a curfew from 10 pm to 7 am. It also allows a tradeoff between the number of events and the maximum permitted sound level. New York (Chapter 150) also trades off overall levels with the duration of the sounds. Colorado (Article 25-12-109) declared that noise restrictions on shooting ranges is a detriment to public health, welfare, and morale.
This provision is a subjective immission control. It is designed to limit the noise disturbance between living units as defined by an enforcement official. One criterion used to evaluate that disturbance is use of plainly audible but at the location of the listener instead of at a specific distance. However, Charlotte, NC (Sec. 15-69) limits indoor levels to 55 dB(A) between 9 am to 9 pm and 5 dB less at other times, but only from sound reproducing devices. Salt Lake Valley Health Department (Chapter 4), Minneapolis, MN (Chapter 389), and Albuquerque, NM (Article 9) use levels to existing ambient to define a violation. Albuquerque NM and Omaha, NE (Chapter 17) require that intruding sounds not be audible. Burlington, VT (Chapter 18) requires that renters be supplied with the city noise ordinance.
In New York City specifically, the neighbor-to-neighbor noise issue is predominantly based on the average living situation. Due to the fact that most residents either live above, below, or directly next to their neighbors NYC building codes require the "acoustical isolation of dwelling units." Through the use of thick concrete walls or flooring to make sure the condo or cooperative is able to pass a warranty of habitability each unit must be able to withstand a certain amount of noise. [32]
This provision can be both a subjective immission control and an objective emission control. Normally there are daily curfews and in some case weekend curfews. The subjective aspect is to prevent noise disturbance in the adjacent community. The objective aspect is to control the sound output of specific machines. There are four major sources of site noise: (1) direct sound from continually operating equipment such as air compressors; (2) intermittent sound from equipment such as jack hammers;(3)backup alarms; and (4) hauling equipment such as trucks. Air compressor noise is regulated by CFR 204 and backup alarms are regulated by CFR 1926. Boston, MA(Section 16–26.4) permits construction on weekdays between 7 am and 6 pm. Madison, WI (Chapter 24.08) limits sound levels to 88 dB(A) at 50 Feet. Miami, FL (Section 36-6) considers the noise a noise disturbance if it occurs between 6 pm and 8 am during the week and any time on Sunday. Dallas, TX (Section 30-2 (9)) permits construction in residential zones from 7 am to 7 pm on weekdays, from 9 am to 7 pm on Saturdays and Holidays, and prohibits construction on Sundays. Albuquerque, New Mexico (Section 9-9-8) has a more complex control. It prohibits construction and demolition within 500 feet of noise sensitive properties (residences included) if the equipment sound control devices are less effective than the original equipment and if noise mitigation measures are not used when the levels exceed 90 dB (weighting not specified) or more than 80 dB during the day for three days.
This provision is a subjective immission control with a curfew. It is used in residential zones as well as in commercial areas abutting residential zones. Portland, OR (Title 18.10.030) has several ways to handle these tools. They separate outdoor and indoor use to different maximum levels at the property line. They have a night curfew and separate 5 HP tools from higher powered tools. Madison WI (Chapter 24.08) has similar HP restrictions. Albuquerque, NM (Title 9-9-7) restricts locations to more than 500 feet from residential and noise sensitive zones. Dallas, TX(Sec. 30-2) exempts lawn maintenance tools during daylight hours. Green Bay, WI (Subchapter II – 27.201) exempts snow removal tools.
This provision is a subjective immission control with a curfew. It is for impulsive sound sources that are not associated with construction activities or shooting ranges. Many communities use the Maximum Permissible Sound Levels criterion (see below), with a correction for the character of the sound. Illinois () sets maximum blasting levels by land use zone and in three time categories. Portland, OR (Section 18.10.010.F) limits levels to 100 dB (peak) from 7 am to 10 pm and 80 dB (peak) from 10 pm to 7 am.
Hydraulic Fracturing operations generate site sound as well as vehicle sound and several different provisions are required to control it. Federal law regulates the levels of certain site machinery. A subjective immission control or an objective immission control can be applied to surrounding neighborhoods. See maximum Permissible Sound Levels. Motor vehicle sound is mostly off-site so vehicle noise regulations are applicable. See Motor Vehicles on a Public Right-of-way. The State of New York has announced a statewide ban on such operations. Buffalo, NY and Pittsburgh, PA have announced a ban. Colorado has numerous activities to stop fracking.
This is a subjective emission control to reduce the excessive shouting and protests that can surround funeral proceedings. It makes use of the plainly audible term and so adds a distance criterion. There are certain groups, particularly those that object to involvement in foreign wars, who believe it is an obligation to disrupt and picket funerals, especially those of deceased military veterans. This provision must not infringe on Constitutionally protected free speech. Illinois h(720 ILCS 5/26 6)has a comprehensive provision covering more aspects of this event than noise. They failed to use “plainly audible” which is narrower than “audible”. Utah(Section 76-9-108) restricts disruptive activity to beyond 200 feet.
This provision is a subjective immission control with a curfew. Operations in commercial facilities can impact adjacent residential zones. Los Angeles, CA (Section 114.03) places a curfew on such operations between 10pm and 7am but only if the source is within 200 feet of a residence. Chicago, IL (Section 11-4-2830) permits night operations unless they create a noise disturbance. Hammond, IN (Section 6.2.6) prohibits noise disturbance between 7pm and 7am.
This provision is an objective immission control. It requires the measurement of sound levels at or beyond a property line and its vertical extension. There are several methods for implementing such a provision:
Most noise ordinances set maximum levels for two time periods: Day (7am to 10pm) and Night (10pm to 7am). [33] San Diego (Article 9.25)sets three periods: Day (7am to 7pm), Evening (7pm to 10pm), and Night (10pm to 7am) and exempts industrial zones from time based restrictions. Seattle, WA (Chapter 25.08) sets two time periods but changes 7am to 9am on weekends and holidays. Several states have maximum permissible land use sound levels in dB(A). Most have Day and Night periods and three use categories: residential, Commercial and Industrial. Washington[ vague ] (Chapter 70.107) sets maximum levels in dB(A) but allows 5 dB(A) more if the sound is only 15 minutes in an hour, or 10 dB(A) for 5 minutes in an hour. Numerous cities have fixed levels, permitting excess levels for short times (e.g., Dallas, TX, Chapter 30) while others use Leq (Lincoln, NE, Chapter 8.24). Los Angeles, CA (Chapter XI) uses a relative level with a stated but presumed ambient. New York City, NY (Chapter 19) requires Leq measurements to be made over one hour. Atlanta, GA ()[ vague ] limits impulsive sound to 100 dB(C) at property lines, while most reduce the maximum level by 5 dB for pure tones and impulsive sounds.
This provision is a subjective immission control with a curfew. If the activity is done in a residential zone, the Domestic Tools provision can be applied for the repairs, but this provision also is used for the testing phase of any repairs. Los Angeles, CA (Section 114.01) covers this violation in three ways. The first is application of the noise disturbance provision in residential districts between the hours of 8 pm to 8 am. The second is being plainly audible at a distance of 150 feet or more in residential districts between the hours of 8 pm to 8 am. The third is exceeding the presumed ambient by 5 dB. Hammond, IN (Section 6.2.7) prohibits this activity as a noise disturbance at any time.
This provision is a subjective immission control. This provision is generic in that it covers all events that are considered disturbing by a listener, with or without measurement. The strength of this provision is that it covers situations not contemplated in a noise ordinance and can be used as backup for more specific provisions. The weakness is that it may not give fair warning, may lead to arbitrary enforcement on the part of the regulator, or permit unreasonable demands by a listener.
This provision is a subjective immission control. It is used to reduce levels of both stationary and vehicular sound sources around hospitals, schools, and other noise sensitive locations. To provide fair warning visible signs must be posted. It is possible to have an extensive list. For example, if churches are on the list and the community has many of them, signage, compliance, and enforcement can be a problem. In modern hospital environments, helicopter sound is exempt.
This provision is an objective immission control. It regulates the site of the sound source while the Sound Reproduction Devices section regulates the devices that create the sound. It can regulate the sound levels received by involuntary listeners in the surrounding community as well as the sound levels received by voluntary listeners. If the latter aspect is incorporated, limiting internal sound levels often resolves community noise impact. Los Angeles (Article 2, Section 112.06)requires warning signs and limits noise exposure to 95 dB(A) at any position normally occupied. Seattle, WA {Section 25.08.501} considers the sound emitted to be in violation if the sound is plainly audible within a dwelling from 10 pm to 7am; the need for a sound level meter is avoided. Chicago, IL {Section 11-4-2805} limits received sound levels to 55 dB(A) inside a residential dwelling unit but if the ambient is greater, the limit is 65 dB(A). If outdoors, the limit is conversational level at 100 feet from the property line. If the building is set back 20 feet from the property line, the allowable level is 84 dB(A)! Both of Chicago's limits apply from 10 pm to 8 am. Salt Lake health Department, UT {Section 4.5.11.(vii)} sets the limit at 95 dB(A) at a position that would normally be occupied by a patron and 100 dB(A) at other positions. They also require a sign stating WARNING: SOUND LEVELS ON THIS PREMISE [sic] MAY CAUSE PERMANENT HEARING DAMAGE. HEARING PROTECTION IS AVAILABLE. Anchorage, AK (Section 15.70.060.B.12) sets maximum levels for any patron at 90 dB(A).
This provision is a subjective immission control with a curfew. It has been used to regulate the sound of model aircraft on both private and public property. It applies to airborne, water-borne, and land-borne, unmanned vehicles. It makes no distinction between model vehicles and full-size unmanned vehicles. it applies also to the engines of those vehicles. Most regulations pertained to private unmanned vehicles, normally restricted to local open fields. The development of drones with microphones, cameras and GPS has opened the door to commercial use over wider private and public properties. Since federal preemption of drone use will likely occur, it is important for this provision to make the distinction. Salt Lake Health Department (Section 4.5.15) limits activity to 800 feet from a dwelling between 10 pm and 7 am, or if it cases a noise disturbance. Atlanta, GA (Section 74-136(b)) uses the plainly audible criterion across a residential property line, on a public property from 10 pm to 7 am on weekdays or from 10 pm to 10 am on weekends or holidays for any sound source.
This provision is a subjective immission control with a curfew. A propane cannon is used to keep animals and birds from destroying commercial crops. In large fields, many are used and fired as frequent intervals. The sound levels are equivalent to the firing of a small artillery cannon. The provision may contain requirements that limit the number of cannons permitted in a specific area and the number firings per hour for each cannon. Many US states have a Right to Farm Act that limits nuisance litigation. Florida stated that it was a purpose of their act to protect reasonable agricultural activities conducted on farm land from nuisance suits. They also added a section that limited expand of operations without consideration of noise. Fairfax County, VA (Sections 105-4-4 and 108-5-1) require agricultural operation to meet maximum land use regulations and prohibit unnecessary noise. British Columbia Ministry of Agriculture (Farm Nuisance Noise document) have developed a comprehensive set of rules for cannon use.
This provision is a subjective immission control. It can contain a plainly audible term or a curfew. It is applied to commercial facilities using a sound system to deliberately propagate mostly speech, but also music. Most cities have provisions relevant to this subject. Lakewood, CO (Sections 9.52.06 and 09.52.160) used plainly audible as a regulatory tool and prohibits the sounding of bells, or chimes from 10 pm to 7 am. Charlotte, NC (Section 15-69(a)(4)) limits levels to 60 dB(A) at 50 feet from 9 am to 9 pm and 50 dB(A) at other times. Indianapolis, IN (Section 391-505) addresses broadcasts from aircraft. Connecticut (Section 22a-69-1.7) exempts bells, carillons, and chimes from religious facilities.
This provision is subjective immission control. It may contain a numerical level or a plainly audible term and a curfew. it is applied to specific sources of sound as opposed to any location at which the sound is created. It is applied primarily to amplified sound sources. Older provisions listed several items such as televisions, phonographs, etc. Changing the title to the above addresses the real issue and allows for novel sound production devices. Numerous communities have provisions for these devices; many use plainly audible as the criterion, such as Omaha, NE (Section 17-3) and Buffalo NY (Section 293-4)
This provision can be either a subjective or objective immission control with a curfew. The subjective aspect relates to noise disturbance in the local community. The objective aspect limits the acceptable sound level in the local community. Illinois (Environmental Protection Act 415.25) exempts certain stadiums and exempts festivals, parades, or street fairs. Colorado Spring, CO (Section 9.8.101) has similar exemptions, but limits the sound levels to 80 dB(A) at residential locations.
This provision is an emission control with a list of devices that are exempt. It can have a term that limits the time periods in which emergency alarms may be tested. It can have a term that limits the activation time of burglar or fire alarms. Chicago, IL (Section 11-4-2815) limits the time for tests to 4 minutes between 9 am and 5 pm. Oregon (Chapter 467) prohibits sound when an emergency vehicle is stationary.
This provision is an emission control that limits the activation period of alarms and restricts activation to a specific time-of-day or day-of-week. Los Angeles, CA () prohibits the sounding if the signal can be heard at 200 feet or more. Chicago, IL (Section 11-4-2820) considers the sound to be a noise disturbance in residential areas if the sound exceeds 5 minutes in any hour; steam whistles are exempt. Albuquerque, NM (Section 9-9-12) restricts levels to 5 dB over the ambient at a property line and applies maximum permissible residential level as well as plainly audible restrictions at night.
This provision is a subjective immission control with a curfew. Boston, MA (Section 16–2.2) prohibits street sales near schools or churches if there is a “disturbance of the peace”. Hammond, IN (Section 6.2.4) places a curfew between 6 pm and 9 am.
This provision prevents the modification of muffling devices that increase the emitted sound. It can also be used to prevent the commercial sale of such mufflers. Most states and communities have prohibitions on tampering with noise reduction devices. whether stationary or moving. Salt Lake County health Department (Section 4.5.10) prohibits modifications of mufflers that increase sound levels and prohibits tampering with noise rating labels. See Section below on Adequate Mufflers.
This provision is a subjective emission control. Noise disturbance caused by vibration comes in three forms. One is contact with vibrating surfaces, the second in auditory, and the third is the observation of surrounding objects movement. Objectively regulating vibration is difficult so this provision makes use of the Vibration Perception Threshold. Railroad caused vibration is preempted by federal law (CFR 201). Chicago, IL (Section 11-4-2910) uses the perception threshold method. Dallas, TX requires measurement of low frequency vibration. Maryland uses the definition of noise to include sound and vibration at sub-audible frequencies.
The sound created by wind turbines is caused by the blade rotation similar to aircraft propellers. Because the rotation rate is low, the frequency is also low, but the large size of many can result in disturbing sound levels, particularly in high wind areas. [34] Most local control is done by advantageous site planning. New Hampshire (Title LXIV, Section 674:63) sets a sound level limit of 55 dB when measured at the site property line, allowing for exceptional events, such as storms. Studies have declared that wind noise can have a negative effect on health. [35]
Stationary sources have fixed positions, so it is possible to define the listeners and therefore immission controls are appropriate. Motor vehicles are moving sources so it is not possible to define any specific listeners so emission controls are appropriate. There are exceptions to this distinction. Construction equipment, and some recreation vehicles, move within a bounded area and can be considered to be time varying fixed sources. Standing motor vehicles can radiate sufficient sound to create noise disturbance. These must be treated by specific provisions. [31]
This provision is an objective emission control. Unlike the Tampering provision, this is specific to motor vehicles. It requires that a vehicle muffler not create more sound than the original equipment which has been measured. It prohibits any modification or replacement that increases the sound emission beyond that of the original equipment. It prohibits the sale of mufflers that do not meet original equipment standards. Many states have requirements that a muffler shall be in good working order which is not specific enough. California (Section 27150.1)) requires that a retail seller that sells a product in violation of the muffler regulation must install a replacement muffler that meets the regulation and must reimburse the purchaser for the expense of replacement.
This provision is both an "objective emission control and a subjective immission control. It can set a maximum sound level at a specified distance (typically 50 feet). It can have a curfew. It can be based on noise disturbance in the community. It can also require the use of ear protectors on passengers. Unlike motorboats, the sound generators on these vehicles are airborne, resulting in more noise impact. Florida (Section 327.65) requires a maximum level of 90 DB(A). Maine (Title 12 Section 13068-A)has three levels: operating, operating test and stationary test
This provision is an emission control. It can restrict brake use for only safety purposes and by defining restricted areas. It can require that mufflers be maintained to keep emitted sound to that of the original equipment. Common terminology is Jake brakes after the Jacobs Company. Milwaukee, Wi (Section 80-69) prohibits use within city limits. Portland, OR (Section 18.10.020.B.3) prohibits use within 200 feet of a residence. Albuquerque, NM posts signs requiring proper mufflers.
This provision is both an objective emission control and a subjective immission control. Because they are moving sources, objective controls are appropriate for measurements on open waterways. Many motorboats operate in bounding areas, such as small lakes or canals, with adjacent residential areas. In this case, immission controls are appropriate. California (Section 654.05), Portland OR (Section 18.10.040), and Seattle, WA (Section 25.08.485) require immission measurements to be made at the shoreline. Many states require emission measurements to be made at 50 feet.
This provision is both a prohibition and an emission control. it limits to use for safety warning only.. It limits the sound level to a specific level at a prescribed distance. This provision is intended to limit horn use to safety and to limit the use of excessively loud air horns or Rumbler or Howler horns. California prohibits a person operating a motor vehicle to wear a headset or earplugs on both ears. Oregon (Section 820.370) prohibits signaling sound when an emergency vehicle is stationary or returning from an emergency
This provision is an objective emission control. It applies maximum sound levels to various categories of moving vehicles and for several vehicle speeds. It is the backbone of vehicle sound emission regulations. It generally requires a measurement of A-weighted sound level of a moving vehicle at a specific distance from the vehicle path (normally 50 feet). This provision has level restrictions on trucks over 10,000 GVW used locally and in interstate commerce. It also covers motorcycles of two horsepower ratings, mopeds, and all other vehicles on public rights-of-way. The federal government has set maximum levels for heavy trucks used in interstate commerce (40 CFR 202)and for motorcycles (40 CFR 205). Most states and many cities have maximum limits and they generally agree with federal standards where they apply. [36] The most common speed division is 35 mph.
This provision is an objective emission control. It can define the method of vehicle operation that is used to define the maximum permitted sound level. It can have a curfew. Some states exempt motor vehicle racing events from noise disturbance litigation or prosecution. Arizona (Section 28-955.03) exempts racing motorcycles from maximum sound levels and muffler requirements. Illinois {Section 35.903} had detailed regulations on racing vehicles It required a 14 dB reduction in sound output, limited sound output at half mater to 115 dB(A), and no more than 105 dB(A) at 50 feet.
This provision is both an objective emission control, a subjective emission control, and a subjective immission for vehicles on a public right-of-way. The first part limits the system sound level at a fixed distance. The second part uses the plainly audible definition for limiting the sound output. The third part uses the noise disturbance definition to limit the impact on neighboring properties and can be applied within public transportation. The most restrictive application of the plainly audible laws says that the sound cannot be audible to anyone other than the vehicle occupants. There are numerous state and community restrictions on vehicle sound systems. Louisiana prohibits the system from emitting sound outside of a vehicle. Richmond, CA also prohibits the sound from being audible outside the vehicle. Oregon prohibits sound systems being plainly audible at 50 feet. California prohibits sound systems that can be heard at 50 feet. Colorado Springs, CO, requires a measurement at 25 feet beyond the private property line or 25 feet from the source on public property; it does not specify a limiting level. In Lakewood, CO it must not be plainly audible beyond 25 feet. In Los Angeles, CA, it cannot be audible beyond 200 feet. In Seattle, WA, it must not be plainly audible at 75 feet. Chicago restricts levels to less than clearly audible at 75 feet. Minneapolis, MN restricts levels to less than audible at 50 feet. Albuquerque, NM restricts plainly audible to 25 feet, but also applies their land use limits. Cincinnati, OH restricts plainly audible to 50 feet. Dallas, TX prohibits sound or vibration that is detectable at 30 feet, or that violates the land use regulations. Houston, TX applies land use restrictions. Omaha, NE states the sound must not be audible at 100 feet. Hammond, IN restricts plainly audible to 25 feet. New Jersey states the sound must not be plainly audible at 50 feet between 8 am and 10 pm and not plainly audible at 25 feet between 10 pm and 8 am. Florida states the sound must not be plainly audible at 25 feet, but exempts business and political systems. Oregon and Tennessee state that the sound must not be plainly audible beyond 50 feet, as does Fairbanks, AK. Rhode Island specifically addresses low frequency sound that can be heard 20 feet from a closed vehicle or 100 feet otherwise. Salt Lake County Health Department, UT considers the sound a violation if it is plainly audible on a common carrier. Austin, TX states it must not be audible at 30 feet.
This provision is a subjective emission control with only an operational time limit. Los Angeles, CA () requires silencing in 5 minutes. New York City, NY (Section 24.221(d)) requires automatic shut-off after 10 minutes and a prominent display of the local precinct number and telephone number. Boston, MA (Section 16–26.2) considers it a violation if the alarm is plainly audible at 200 feet and is on more than 5 minutes. Other states and communities have automatic shutoff times from 10 to 15 minutes. Some communities have banned such alarms.
This provision is a subjective immission control. It is based on the noise disturbance from drag racing and tire squealing on public rights-of-way. Illinois (625 ILCS 5/11-505) prohibits such activities. Hammond, IN (Section 6.2.14) prohibits such activity if it creates a noise disturbance.
Railroad activity is subject to federal regulations. Most communities do not attempt to regulate train sound. The level of train horns permitted by the Federal Railroad Administration sufficiently high that community impact occurs. One method to alleviate this sound is to have a community establish a quiet zone where the rail crossings meet federal safety standards so that horn use is not needed.
This provision is both an objective emission control and a subjective immission control with a curfew. It can apply to both public and private properties. Since these vehicles can move in large open areas, an objective control, limiting maximum sound levels at a fixed distance, is appropriate. Since they also can move in bounded areas near residences, a subjective control is appropriate. Numerous states and cities have emission controls measured at 50 feet; the most common level is 82 dB(A), which is similar to that for motor vehicles on public rights-of-way. Colorado Springs, CO (Section 9.8.204.C) requires a minimum distance of 660 feet from residences. Portland, OR (Section 18.10.020.C) requires the area must be designated for recreational vehicle use. Salt Lake health Department, UT (Section 4.5.10(x)) requires off-highway vehicles to be at least 800 feet from a dwelling during the day and has a curfew from 10 pm to 7 am. They prohibit any noise disturbance and require sound levels to the less than 96 dB(A) at 50 feet.
This provision is both an objective emission control and a subjective immission control with a curfew. It can apply to both public and private properties. Since these vehicles can move in large open areas, an objective control, limiting maximum sound levels at a fixed distance is appropriate. Since they also can move in bounded areas near residences, a subjective control is appropriate. Numerous states and communities have objective controls; the most common maximum level is 78 dB(A). Federal law (36 CFR 2.18) regulates snowmobiles on federal property at 78 dB(A), so states and communities are free to regulate snowmobile sound levels on their property. Lincoln NE (Section 8.24.110) limits levels to 78 dB(A). Maine (Section 13112, Chapter 937) exempts snowmobiles at sanctioned racing events. Illinois (625 ILCS 40 Sec. 4-4)does also.
This provision is an objective emission control and a subjective control. It can place a maximum sound level at a specific distance for the loudest operation. It can set a curfew, or it can be based on noise disturbance in residential zones. Los Angeles, CA (Section 113.01) has a time limit that applies only within 200 feet of any residential building. Chicago, IL (Section 11-4-2900) considers any noise it a noise disturbance if the activity occurs between 8 pm to 8 am. Salt Lake City, UT (Section 4.5.6) considers it a noise disturbance if the activities occur between 10 pm to 7 am and closer than 800 feet from a dwelling. Atlanta, GA (Section 74-137(a)(5)prohibits collection between 9 pm and am on a weekend day or legal holiday, except by permit. In Maryland, refuse collection is exempt during daytime hours and must meet maximum land use levels [55 dB(A)] in residential zones at night. Note in some areas garbage trucks themselves play music to let residents know it is time to bring out their garbage.
This provision is a subjective immission control. It sets a time limit on engine activity. It can also place a curfew on any engine activity. e. In Salt Lake City, UT (Section 4.5.10(xi)) it is considered a noise disturbance if the operation lasts more than 15 minutes. Dallas, TX (Section 30–3.1) applies the code to vehicles over 14,000 GVWR; they must be more than 300 feet from a residential zone and there is a 10-minute maximum. They also provide a list of idling vehicles that are exempt from prosecution such as buses or active concrete trucks. Hammond, IN (Section 6.2.10) limits operation to 3 minutes in an hour for vehicles over 14,000 GVWR in either public or private property. It exempts buses and taxis. Massachusetts allows idling no more than 5 minutes.
In the case of construction of new (or remodeled) apartments, condominiums, hospitals and hotels, many U.S. states and cities have stringent building codes with requirements of acoustical analysis, in order to protect building occupants from exterior noise sources and sound generated within the building itself. [37] With regard to exterior noise, the codes usually require measurement of the exterior acoustic environment in order to determine the performance standard required for exterior building skin design.
The architect can work with the acoustical scientist to arrive at the best cost-effective means of creating a quiet interior (normally 45 dB). The most important elements of design of the building skin are usually: glazing (glass thickness, double pane design, etc.), roof material, caulking standards, chimney baffles, exterior door design, mail slots, attic ventilation ports and mounting of through the wall air conditioners. A special case of building skin design arises in the case of aircraft noise, where the FAA has funded extensive work in residential retrofit.
Regarding sound generated inside the building, there are two principal types of transmission. First, airborne sound travels through walls or floor/ceiling assemblies and can emanate from either human activities in adjacent living spaces or from mechanical noise within the building systems. Human activities might include voice, amplified sound systems or animal noise. Mechanical systems are elevator systems, boilers, refrigeration or air conditioning systems, generators and trash compactors. Since many of these sounds are inherently loud, the principle of regulation is to require the wall or ceiling assembly to meet certain performance standards (typically Sound Transmission Class of 50), which allows considerable attenuation of the sound level reaching occupants.
The second type of interior sound is called Impact Insulation Class (IIC) transmission. This effect arises not from airborne transmission, but rather from transmission of sound through the building itself. The most common perception of IIC noise is from footfall of occupants in living spaces above. This type of noise is somewhat more difficult to abate, but consideration must be given to isolating the floor assembly above or hanging the lower ceiling on resilient channel. Commonly a performance standard of IIC equal to 50 is specified in building codes. California has generally led the U.S. in widespread application of building code requirements for sound transmission; accordingly, the level of protection for building occupants has increased markedly in the last several decades.
The U.S. Occupational Safety and Health Administration has established maximum noise levels for occupational exposure, beyond which mitigation measures or personal protective equipment is required. [38] In recent years, Buy Quiet programs and initiatives have arisen in an effort to combat occupational noise exposures. These programs promote the purchase of quieter tools and equipment and encourage manufacturers to design quieter equipment. [39]
General
A weighting filter is used to emphasize or suppress some aspects of a phenomenon compared to others, for measurement or other purposes.
Noise is sound, chiefly unwanted, unintentional, or harmful sound considered unpleasant, loud, or disruptive to mental or hearing faculties. From a physics standpoint, there is no distinction between noise and desired sound, as both are vibrations through a medium, such as air or water. The difference arises when the brain receives and perceives a sound.
Noise pollution, or sound pollution, is the propagation of noise or sound with ranging impacts on the activity of human or animal life, most of which are harmful to a degree. The source of outdoor noise worldwide is mainly caused by machines, transport and propagation systems. Poor urban planning may give rise to noise disintegration or pollution, side-by-side industrial and residential buildings can result in noise pollution in the residential areas. Some of the main sources of noise in residential areas include loud music, transportation, lawn care maintenance, construction, electrical generators, wind turbines, explosions and people.
Sound can be recorded and stored and played using either digital or analog techniques. Both techniques introduce errors and distortions in the sound, and these methods can be systematically compared. Musicians and listeners have argued over the superiority of digital versus analog sound recordings. Arguments for analog systems include the absence of fundamental error mechanisms which are present in digital audio systems, including aliasing and associated anti-aliasing filter implementation, jitter and quantization noise. Advocates of digital point to the high levels of performance possible with digital audio, including excellent linearity in the audible band and low levels of noise and distortion.
Environmental noise is an accumulation of noise pollution that occurs outside. This noise can be caused by transport, industrial, and recreational activities.
Aircraft noise pollution refers to noise produced by aircraft in flight that has been associated with several negative stress-mediated health effects, from sleep disorders to cardiovascular disorders. Governments have enacted extensive controls that apply to aircraft designers, manufacturers, and operators, resulting in improved procedures and cuts in pollution.
Audio system measurements are used to quantify audio system performance. These measurements are made for several purposes. Designers take measurements to specify the performance of a piece of equipment. Maintenance engineers make them to ensure equipment is still working to specification, or to ensure that the cumulative defects of an audio path are within limits considered acceptable. Audio system measurements often accommodate psychoacoustic principles to measure the system in a way that relates to human hearing.
Soundproofing is any means of impeding sound propagation. There are several methods employed including increasing the distance between the source and receiver, decoupling, using noise barriers to reflect or absorb the energy of the sound waves, using damping structures such as sound baffles for absorption, or using active antinoise sound generators.
Automotive engineering, along with aerospace engineering and naval architecture, is a branch of vehicle engineering, incorporating elements of mechanical, electrical, electronic, software, and safety engineering as applied to the design, manufacture and operation of motorcycles, automobiles, and trucks and their respective engineering subsystems. It also includes modification of vehicles. Manufacturing domain deals with the creation and assembling the whole parts of automobiles is also included in it. The automotive engineering field is research intensive and involves direct application of mathematical models and formulas. The study of automotive engineering is to design, develop, fabricate, and test vehicles or vehicle components from the concept stage to production stage. Production, development, and manufacturing are the three major functions in this field.
A leaf blower, commonly known as a blower, is a device that propels air out of a nozzle to move debris such as leaves and grass cuttings. Leaf blowers are powered by electric or gasoline motors. Gasoline models have traditionally been two-stroke engines, but four-stroke engines were recently introduced to partially address air pollution concerns. Leaf blowers are typically self-contained handheld units, or backpack mounted units with a handheld wand. The latter is more ergonomic for prolonged use. Larger units may rest on wheels and even use a motor for propulsion. These are sometimes called "walk-behind leaf blowers" because they must be pushed by hand to be operated. Some units called blower vacs, can also suck in leaves and small twigs via a vacuum, and shred them into a bag.
In acoustics, loudness is the subjective perception of sound pressure. More formally, it is defined as the "attribute of auditory sensation in terms of which sounds can be ordered on a scale extending from quiet to loud". The relation of physical attributes of sound to perceived loudness consists of physical, physiological and psychological components. The study of apparent loudness is included in the topic of psychoacoustics and employs methods of psychophysics.
Bicycle law in California is the parts of the California Vehicle Code that set out the law for persons cycling in California, and a subset of bicycle law in the United States. In general, almost all the same rights and responsibilities that apply to car drivers apply to bicycle riders as well.
The Comité International Spécial des Perturbations Radioélectriques was founded in 1934 to set standards for controlling electromagnetic interference in electrical and electronic devices and is a part of the International Electrotechnical Commission (IEC).
Noise control or noise mitigation is a set of strategies to reduce noise pollution or to reduce the impact of that noise, whether outdoors or indoors.
Noise health effects are the physical and psychological health consequences of regular exposure to consistent elevated sound levels. Noise from traffic, in particular, is considered by the World Health Organization to be one of the worst environmental stressors for humans, second only to air pollution. Elevated workplace or environmental noise can cause hearing impairment, tinnitus, hypertension, ischemic heart disease, annoyance, and sleep disturbance. Changes in the immune system and birth defects have been also attributed to noise exposure.
Building regulations in the United Kingdom are statutory instruments or statutory regulations that seek to ensure that the policies set out in the relevant legislation are carried out. Building regulations approval is required for most building work in the UK.
Roadway noise is the collective sound energy emanating from motor vehicles. It consists chiefly of road surface, tire, engine/transmission, aerodynamic, and braking elements. Noise of rolling tires driving on pavement is found to be the biggest contributor of highway noise and increases with higher vehicle speeds.
Air quality laws govern the emission of air pollutants into the atmosphere. A specialized subset of air quality laws regulate the quality of air inside buildings. Air quality laws are often designed specifically to protect human health by limiting or eliminating airborne pollutant concentrations. Other initiatives are designed to address broader ecological problems, such as limitations on chemicals that affect the ozone layer, and emissions trading programs to address acid rain or climate change. Regulatory efforts include identifying and categorising air pollutants, setting limits on acceptable emissions levels, and dictating necessary or appropriate mitigation technologies.
A bicycle bell is a percussive signaling instrument mounted on a bicycle for warning pedestrians and other cyclists. They are usually mounted on the handlebars and thumb activated.
Noise calculation is the process of calculating the level of noise immission using the metric dB(A). Noise immission is created by noise sources of various types which are propagating noise into the environment. A single source will create a certain level of immission primarily driven by originating sound power level and distance influenced by e.g. absorption and reflection. Several noise sources result in typically higher levels of immission. The method or process of determining the resulting immission level is called noise calculation, its graphical representation is called noise map.
{{cite journal}}
: Cite journal requires |journal=
(help){{cite web}}
: CS1 maint: archived copy as title (link){{cite web}}
: CS1 maint: archived copy as title (link) Appendix A{{cite web}}
: CS1 maint: archived copy as title (link) Appendix B