Renault Vivaquatre | |
---|---|
Overview | |
Manufacturer | Renault |
Production | 1932-1939 |
Assembly | Île Seguin, Boulogne-Billancourt, Paris |
Designer | Louis Renault |
Body and chassis | |
Class | Midsize car |
Layout | FR layout |
Powertrain | |
Engine | 2120 cc I4 2383 cc I4 |
Transmission | 3-speed manual |
Dimensions | |
Wheelbase | 2,890 mm (113.8 in) ("KZ13/KZ17", "normal") 3,130 mm (123.2 in) ("KZ13/KZ17" "long") |
Length | 4,250 mm (167.3 in) ("normal") 4,490 mm (176.8 in) ("long") |
Chronology | |
Predecessor | Renault 10CV |
Successor | Renault Frégate |
The Vivaquatre is a car produced by Renault between 1932 [1] and 1939. Its large 4-cylinder engine placed it initially in the 10CV car tax class, though a larger engine later made it a contender in the 11CV class.
The "G7" long-wheelbase version of the car was offered for taxi work from April 1933, and Vivaquatre taxis continued to operate till the end of the 1950s.
The Vivaquatre originated as an offshoot of the development of the Renault Primaquatre which had come to the market a year earlier. The two cars shared a broadly similar chassis design, although the Vivaquatre featured, even in its "normal" configuration, a wheelbase lengthened by 26 cm (10.2 in). Factory assigned project codes also hint at the shared origins of the two models. The original Vivaquatre was identified as project "KZ7" while the original Primaquatre was coded "KZ6". The predecessor model was in both cases known at the time as the Renault 10CV, but is identified in retrospect by the more distinctive project code as the "KZ".
The Vivaquatre replaced the Renault 10CV which had been as a robust unpretentious car. The Vivaquatre followed the same pattern, closely resembling the earlier car in terms of its principal mechanical elements. [1] The manufacturer offered various "berline" (sedan/saloon) bodies but there was nothing so frivolous as a cabriolet or coupé bodied version. There was, however, a choice of two wheelbase lengths, the longer of which supported a "six-light" body (with three windows on each side) and underpinned the Vivaquatre's long running popularity with the trade of the taxi version.
The Vivaquatre was, in its time, the largest of Renault's four-cylinder models. [2] It could easily be distinguished from models further up in the Renault range by its stand alone headlights and uncovered rear wheel at a time when the manufacturer's larger cars had their head-lights integrated into the front wings and the rear wheels partially covered by fashionable so-called "spats". [1] The Vivaquatre's four cylinder engine also allowed for a shorter bonnet than that to be found on the six-cylinder Renaults. [1] The car's no-nonsense image was further enhanced by a choice, at the time of the motor show in October 1935, between just two colours on the "Luxe" version, these being black and dark blue. [1] Buyers of the "Grand Luxe" version found the colour palette extended to four, through the addition of grey and bordeaux. [1] For the interior there was no choice but to go for standard "marron" (chestnut) coloured fabric. [1]
The 4-cylinder side-valve 2120cc fitted on the original Vivaquatre provided a claimed maximum output of 35 hp. The listed power output increased, but the engine size remained constant through the subsequent "KZ17" (1934) and "KZ23" (1935) versions of the car. Power was delivered to the rear wheels, and the three speed transmission came without synchromesh.
The car's evolution followed the Renault tradition of a long series of incremental changes, and there were also frequent body changes, as the car's style became progressively more modern and "aerodynamic". The situation is complicated, in retrospect, by the tendency of the Renault catalogues to offer for sale more than one generation of the model at a time. From April 1932 the manufacturer added the option of paying (in 1932) an extra 4,000 francs of an "SA" version of the engine. [1] "SA" stood for "Suspendu Amorti" [1] which was intended to highlight changes to the engine mountings designed to reduce the effects of engine vibration. This presumably was in response to the "Moteur flottant" ("floating engine") introduced at the same time by Citroën. [1]
At the 27th Paris Motor Show in October 1933 Renault were displaying the "KZ13" version of the Vivaquatre. [3] Both the "normal" and "long" bodied cars retained the conventional square-backed style of the early 1930s, but the corners were a little more rounded and, most obviously, the previously vertical front grill was now raked at an angle. [3] (The same fashion driven change was being applied to the Citroën Rosalie at this time.) Renault were advertising six different standard body options, all of which were types of "berline" (sedan/saloon). [3] Two featured two side windows on each side and four were "six-light" designs, with three windows on each side of the body. The six body types (with October 1933 listed prices) were:
A more slippery shape would join the line-up in Spring 1934 with the addition of the "Conduite Intérieure Aérodynamique: 5 places" 23,100 francs, the price of which suggested that it was intended for production in relatively large volumes. [3]
A new sequence of project codes was marked by the arrival of the Vivaquatre "ADL1" in 1936. Although the car still used a large 4-cylinder engine, the engine size was increased to 2383cc and claimed maximum power was now 56 HP achieved at 3,300 rpm.
By the time of the 30th Paris Motor Show in October 1936 the Vivaquatre used what appeared to be the same "aérodynamique" body shell as the manufacturer's 6-cylinder models, but from the side it was clear that the nose and therefore the overall length of the car was nevertheless still significantly shorter, reflecting the lesser length of its four cylinder side-valve engine (by now grown to 2,383cc). [4] The Vivaquatre was a large car by the standards of the time and place, but its power unit and "familiale"/"utilitaire" character placed it at the bottom end of Renault's extensive range of large cars. [4] While the publicity from his principal rival, Andre Citroen, made much of the "tout-acier" ("all-steel") body structure of his modern mass-produced cars, Louis Renault's relationship with Ambi Budd was characterized by a long standing litigation involving alleged patent infringement, and Renault publicity avoided mention of the structural principals used to construct Renault car bodies, but the increasingly curvaceous shapes of the car bodies and the maximisation of shared body panels across several different sizes of car model indicate that Renault car bodies by now had little in common with the heavier labour-intensive timber frame car bodies that had still been mainstream five years earlier. [4] For the 1937 model year the Vivaquatre "ADL2" received the new "wrap-around trapedoidal" front grill shared with other Renaults and the headlights integrated into the front wings now had wind-cheating covers. [4] Plain disc wheels were replaced by disc wheels each with 12 holes placed in a ring pattern between the hub and the outer rim of the wheel. [4] The sloping rear made it possible to include an extra bulge for a boot//trunk accessible from outside, although the entry-level cars came without any opening at the back apart from the flap that covered the now horizontally stowed spare wheel. Although the bodies were more streamlined, the range of standard bodies listed was not so different. [4] The five body types (with listed prices also little changed, reflecting several deflationary years experienced at this stage of the economic depression) at the 1936 motor show were: [4]
During the ensuing years three more versions followed, the "BDH1", "BDH3" and "BDH4". Mechanically, however, the new numbers reflected no further significant changes after 1936. What did change was the all-steel bodies which became progressively more "streamlined" and featured increasingly complex panel shapes. More steeply sloping tails and more intricately styled fronts also correlated with longer overhangs, and by 1939, when the Vivaquatre was pensioned off, [5] the body of the "long" wheelbase version had reached 4,700 mm (185.0 in) in length.
There was no direct successor for the Vivaquatre, [5] but in 1950 Renault would return to the sector with their Frégate model.
Panhard was a French motor vehicle manufacturer that began as one of the first makers of automobiles. It was a manufacturer of light tactical and military vehicles. Its final incarnation, now owned by Renault Trucks Defense, was formed by the acquisition of Panhard by Auverland in 2005, and then by Renault in 2012. In 2018 Renault Trucks Defense, ACMAT and Panhard combined under a single brand, Arquus.
Unic was a French manufacturer founded in 1905, and active as an automobile producer until July 1938. After this the company continued to produce commercial vehicles, retaining its independence for a further fourteen years before being purchased in 1952 by Henri Pigozzi, who was keen to develop Unic as a commercial vehicle arm of the then flourishing Simca business.
Berliet was a French manufacturer of automobiles, buses, trucks and military vehicles among other vehicles based in Vénissieux, outside of Lyon, France. Founded in 1899, and apart from a five-year period from 1944 to 1949 when it was put into 'administration sequestre' it was in private ownership until 1967 when it then became part of Citroën, and subsequently acquired by Renault in 1974 and merged with Saviem into a new Renault Trucks company in 1978. The Berliet marque was phased out by 1980.
The Renault Juvaquatre is a small family car / compact car produced by the French manufacturer Renault between 1937 and 1960, although production stopped or slowed to a trickle during the war years. The Juvaquatre was produced as a sedan/saloon until 1948 when the plant switched its full attention to the new Renault 4CV. During the second half of 1952 the plant restarted production of the Juvaquatre sedans/saloons for a period of approximately five months.
The Peugeot 202 is a supermini developed and designed by the French car manufacturer Peugeot. Production of the car ran between 1938 and 1942 and then, after a brief production run of 20 in early 1945, restarted in mid-1946. It was sold until 1949, by when it had been replaced by the 203.
Buchet was a French motorcycle and automobile manufacturer between 1899 and 1930.
The Peugeot 402 is a large family car produced by Peugeot in Sochaux, France, from 1935 to 1942. It was unveiled at the Paris Motor Show in 1935, replacing the Peugeot 401.
Charron was a French automobile manufacturer, based in the Paris conurbation, and active between 1906 and 1930.
The Novaquatre is a car first presented in the autumn of 1937 by Renault and produced until 1940. It was presented in 1937 as an economy version of the Primaquatre, combining the body of the little Renault Celtaquatre, with the 2383 cc 4-cylinder water-cooled engine of the larger Renault Primaquatre.
The Panhard et Levassor Dynamic is a large car produced by the French auto-maker Panhard et Levassor from 1936 to 1940 as a replacement for the company’s CS. It was introduced at the Paris Motor Show in October 1936.
The Berliet Dauphine is a family car produced by Berliet at their Vénissieux plant on the south side of Lyon between summer 1934 and 1939. The original cars had a 1990cc engine placing them in the 11CV car tax band, but this was quickly joined by a 1,600cc (9CV) version, and at one stage a 14CV powered version was advertised as available “sur commande”.
The Delage D6 is a six-cylinder luxury car produced by the manufacturer between 1930 and 1940 and again, after the war, between 1946 and 1953. For much of this time it was the company’s principal or, from 1946, only model.
Ryjan was a make of French automobile produced by the Grillet company between 1920 and 1926. The factory was established in what was then a small town, a short distance to the west of Paris, called Chatou. In 1925 production was relocated to Nanterre in the west of the country.
SA des Anciens Établissements Secqueville-Hoyau was a French automobile producer between 1919 and 1924. The factory was established in what was then a small town, a short distance to the north-west of Paris, called Gennevilliers.
The Citroën B2 is the second model produced by Citroën. It is therefore the second European car to have been constructed according to modern mass production technologies. It was produced at André Citroën's factory in central Paris between May 1921 and July 1926.
The Nervastella is a large automobile constructed by Renault between 1930 and 1937. It was used as a state car and pictures of the president of the French Republic sitting in a Nervastella can therefore be seen in newsreels from the mid-1930s.
The Salmson S4 is a mid-size executive-level car introduced as the Salmson S4 C by Société des Moteurs Salmson in Autumn 1932. It was the manufacturer's principal and often sole model for the next twenty years.
Automobiles J. Suère was a French manufacturer of automobiles between 1909 and 1931.
Benjamin was a French manufacturer of cyclecars between 1921 and 1927 and based on the north-west edge of Paris. 1927 was a year of changes which included a name change, and between 1927 and 1929 the company operated under a new name, Benova.
The Renault Vivasport was a 6-cylinder engined executive automobile introduced by Renault in September 1933 and produced till April 1935. A larger engined version was produced between December 1934 and February 1938. As with many Renaults during the 1930s, type changes as well as small often cosmetic facelifts and upgrades appeared frequently.