A runabout is a car body style popular in the 1910s, based on the horse-drawn runabout carriage.
It was popular in North America from 1900 to about 1915. It was a light, basic style with no windshield, top, or doors and a single row of seats. Runabouts eventually became indistinguishable from roadsters and the term fell out of use in the United States. The approach has evolved into the modern "city car".
Runabouts originated as a type of horse and carriage body.
In 1881, Rufus Meade Stivers produced runabout bodies using a patent held by Joseph Tilton. [1] Stivers, a blacksmith and wheelwright, produced the runabouts in his carriage manufactory on East 31st Street, Manhattan, established in 1851. [2] [3]
According to The Carriage Journal,
The special feature of the runabout was that the body was hung low by using cranked axles, and the side-bars were attached to legs at the top of the crank. The original runabout was made without a top, and, besides hanging low which made for steadiness, it was roomy and comfortable. [2]
Stivers patented the "runabout" name and threatened to sue other manufacturers for infringement. However, buggies titled "runabout" were produced by other manufacturers and soon applied to many different shapes without regard to the original meaning. [2]
The runabout was a light, inexpensive, open car [4] [5] with basic bodywork and no windshield, top, or doors. [4] Most runabouts had just a single row of seats, providing seating for two passengers. [4] [5] [6] Some also had a rumble seat at the rear to provide optional seating for one or two more passengers; [4] [6] those without rumble seats may have had a trunk platform, a box, or a fuel tank instead. [6] They differed from buggies and high wheelers mainly by having smaller wheels. [4]
Early runabouts had their engines under the body toward the middle of the chassis. [4] This sometimes made maintenance difficult, as on the Oldsmobile Curved Dash where the body had to be removed in order to access the engine. [7] The Gale runabout dealt with this problem by hinging the body at the rear of the car such that it could be tilted to access the engine. [7] [8] Some later runabouts had the engine in what became the conventional position at the front of the car. [4]
Runabouts were popular in North America from the late 19th century to about 1915. [4] They were designed for light use over short distances. [9] By the mid-1910s, they became almost indistinguishable from roadsters. [10]
Notable examples of runabouts include the Oldsmobile Curved Dash mentioned earlier, which was the first mass-produced car, [7] and the Cadillac runabout, which won the Dewar Trophy for 1908 by demonstrating its use of interchangeable parts. [11]
The 1964 GM Runabout was a three wheel concept car first exhibited at Futurama II, part of the 1964 New York World's Fair. The car was designed specifically for housewives and had detachable shopping carts built into it. [12]
The term "runabout" is still in use in the UK, denoting a small car used for short journeys. [13]
A roadster is an open two-seat car with emphasis on sporting appearance or character. Initially an American term for a two-seat car with no weather protection, usage has spread internationally and has evolved to include two-seat convertibles.
Coupé de ville — also known as town car or sedanca de ville — is a car body style produced from 1908 to 1939 with an external or open-topped driver's position and an enclosed compartment for passengers. Although the different terms may have once had specific meanings for certain car manufacturers or countries, the terms are often used interchangeably.
The Adams Company is an American manufacturing concern. It was founded in 1883 and is based in Dubuque, Iowa, United States.
There are many types of car body styles. They vary depending on intended use, market position, location, and the era they were made in.
Touring car and tourer are both terms for open cars. "Touring car" is a style of open car built in the United States which seats four or more people. The style was popular from the early 1900s to the 1930s. The cars used for touring car racing in various series since the 1960s, are unrelated to these early touring cars, despite sharing the same name.
The gasoline-powered Oldsmobile Model R, also known as the Curved Dash Oldsmobile, is credited as being the first mass-produced automobile, meaning that it was built on an assembly line using interchangeable parts. It was introduced by the Oldsmobile company in 1901 and produced through 1903; 425 were produced the first year, 2,500 in 1902, and over 19,000 were built in all. When General Motors assumed operations from Ransom E. Olds on November 12, 1908, GM introduced the Oldsmobile Model 20, which was the 1908 Buick Model 10 with a stretched wheelbase and minor exterior changes.
The Ford Model N is an automobile produced by Ford Motor Company; it was introduced in 1906 as a successor to the Models A and C as the company's inexpensive, entry-level line. It was built at the Ford Piquette Avenue Plant.
The Oakland Motor Car Company of Pontiac, Michigan, was an American automobile manufacturer and division of General Motors. Purchased by General Motors in 1909, the company continued to produce modestly priced automobiles until 1931 when the brand was dropped in favor of the division's Pontiac make.
A landaulet, also known as a landaulette, is a car body style where the rear passengers are covered by a convertible top. Often the driver is separated from the rear passengers by a division, as with a limousine.
Templar was a manufacturer of automobiles in Lakewood, Ohio from 1917 to 1924. The company was named for the Knights Templar and used a Maltese Cross as an emblem.
A high wheeler is a car which uses large diameter wheels that are similar to those used by horse-drawn vehicles. These cars were produced until about 1915, predominantly in the United States.
A rumble seat, dicky (dickie/dickey) seat, also called a mother-in-law seat, is an upholstered exterior seat which folded into the rear of a coach, carriage, or early motorcar. Depending on its configuration, it provided exposed seating for one or two passengers.
Single Center Spring Buggy Company was an American carriage and automobile manufacturer based in Evansville, Indiana. The Single Center factory manufactured the Zentmobile, Zent, Windsor, Worth, Single Center, Evansville, Simplicity and Traveler automobiles from 1903 to 1910.
The Herreshoff was an automobile built in both Detroit, Michigan, and Troy, New York, by the Herreshoff Motor Company from 1909 to 1914. The Herreshoff started as a small car with a 24 hp (18 kW) four-cylinder engine, and was made with three different models. Later models were upgraded to six-cylinder engines up to 3.8 liters capacity. For 1911, Herreshoff had a roadster with a rudimentary rumble seat at US$950 ; by contrast, the high-volume Oldsmobile Runabout went for US$650, the Ford Model N and Western's Gale Model A were US$500, the Black was $375, and the Success, US$250.
Western Tool Works was a pioneering brass era automobile manufacturer in Galesburg, Illinois. The company made Gale automobiles from 1904 to 1910. Early Gale runabouts were notable for having bodywork hinged at the rear of the car that could be lifted to ease access to the engine, essentially making the entire body the hood.
A runabout is an American light, open, horse-drawn vehicle with four large wheels that predated the runabout car.
A brougham was originally a car body style where the driver sat outside and passengers seated within an enclosed cabin, — deriving the configuration from the earlier brougham horse-drawn carriage. Similar in style to the later town car, the brougham style was used on chauffeur-driven petrol and electric cars.
The Model 42 was an entry-level four seat passenger car produced by GM's Oldsmobile Division in 1914, offered as a replacement to the Oldsmobile Curved Dash runabout when it was discontinued in 1908, and was the junior platform to the Oldsmobile Six introduced in 1913. GM had acquired Elmore Manufacturing Company, Oldsmobile and Oakland Motor Car Company in 1908 and Cartercar and Rainier Motor Car Company in 1909 as their entry-level models, and Oldsmobile products were being repositioned in their new hierarchy as GM began to consolidate operations after William Durant had left.
The Oldsmobile Series 28, also known as the Autocrat, was a mid-level four seat passenger car produced by GM's Oldsmobile Division for 1911 and 1912. It was based on the top-level Oldsmobile Limited while using a four-cylinder engine, and was manufactured in Lansing, Michigan.
The Oldsmobile F-Series was a pre-WWII passenger car built from the 1928 through 1938 model years. The first generation continued the tradition of adding a series number for each model year; F-28, F-29, F-30 and F-31. The second generation, signified by a completely new bodystyle appearance was built from 1932 through 1938, all having been manufactured in Lansing, Michigan. 1926 saw the introduction of GM's most recognized business model, the use of common platforms shared amongst the brands, and Oldsmobile and Buick shared the GM B platform. The F-Series was shared with the Buick Master Six and was also known as the Oldsmobile Six which was introduced as a name earlier in 1913.
n.1 a small car used for short journeys
Runabout. A general term for a light two-passenger car of the early 1900s.
Under RAC observation three cars from stock were completely dismantled, their parts intermixed, and three new cars assembled, all working flawlessly — a feat that won Cadillac the coveted Dewar Trophy.
The Oldsmobile merits its niche in history as the first true example of mass-production, some 3,750 being turned out in 1903 alone... Despite the Oldsmobile's known reliability, the makers' handbook launches out on the first page of text with the alarming suggestion: 'Let us first remove the body'!