SNCF BB 36000 Astride | |||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() SNCF BB 36003 | |||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||
Sources : [1] [2] except †, [3] ‡, [4] * [5] |
The SNCF Class BB 36000 locomotives (named Astride) are a class of triple voltage 4 axle twin bogie electric locomotives built by GEC-Alsthom (later Alstom) between 1996 and 2001 for SNCF.
Sixty units were built, with thirty units later converted to subclasses 36200, and 36300 - locomotives with additional safety equipment for cross border trains between France and Italy. As of 2012 there are 30 units of the original 36000 class and 30 units of the 36300 subtype. Locomotives operating in Italy have been given the Italian designation FS Class E436.
The subgroup 36001-36030 operates mostly on French-Belgian freight corridors.[ citation needed ]
The first 30 locomotives of Class BB 36000 were built as a result of a modification of an order for 264 of the dual voltage SNCF Class BB 26000 (Sybic); instead only 234 Sybics were built, the last 30 of the order were instead built as a triple voltage design capable of also operating under 3 kV DC with a different electric motor type (AC induction) and newer power semiconductor device technology (GTO type); [6] [7] the multi-voltage specifications came from an expected increase in cross-border traffic, as encouraged by the European Union's specification of "freight corridors". [8] The locomotives were designed to achieve the same traction performance when operated under 25 kV AC, and 3 and 1.5 kV DC; [9] Other design features required or introduced were conformity with European electromagnetic interference standard EN 50121, increased energy efficiency (using regenerative braking), water cooled power electronics, [note 1] and (partial) redundancy of components on failure, and improved maintainability. [8]
The locomotives were given the name Astride, derived from Asynchrone Tri-system Drive Engine, [10] [note 2] the external design was by MDB design. [12]
When powered by a 25 kV AC overhead supply, the primary winding of a 5.76 MW (7,720 hp) electrical transformer is connected to the 25 kV 50 Hz supply; with equivalent outputs on four secondary windings. [13] Each secondary winding supplies 1450 V AC which is rectified, [note 3] and the outputs connected in parallel to a smoothed 2.8 kV intermediate DC link supplying four parallel-connected inverters, each of which individually drives a traction motor. [9] [14]
When operating under a DC supply, the electrical circuit is configured with two separate intermediate 2.8 kV DC links, one per bogie; each DC bus powers two parallel-connected inverters, one for each traction motor. When powered from 1.5 kV DC, choppers are used to step up the voltage to 2.8 kV, [note 3] under 3 kV supply the circuit is re-used with the connection of the DC-DC converter's inductors reconfigured. [8] [9] [14]
The four electric traction motors are force-ventilated, 2070 V (phase difference) 600 A three-phase induction motors weighing 2.550 t (2.510 long tons; 2.811 short tons); the motors have integrated reduction gear and are bogie-mounted. [8] Each of the traction motors has a separate inverter. Dynamic rheostatic electrical braking effort is dissipated through electronically switched resistances connected to the DC link. A maximum braking force of 130 kN (29,000 lbf) is achieved from 30 to 80 kilometres per hour (19 to 50 mph), above 80 km/h (50 mph) electric braking is limited to 2.96 MW (3,970 hp). When operating under 25 kV AC, the electrical circuit allows regenerative braking. [8] [9] [14]
Auxiliary electrical supply is taken via a step-down chopper to a 525 V DC supply; there are four 75 kW (101 hp) (380 V max) three-phase inverters. Two of them supply variable speed and voltage power for cooling fans for the traction motors, transformer, rheostatic brake, locomotive main electronics block. Another one supplies fixed voltage and frequency (air compressor, oil pumps, other loads), the inverters are switchable with one unit providing redundancy. Additionally there are two 72 V 40 A inverters for battery charging. [8]
An additional thirty units were ordered by SNCF in addition to the modified Sybic order. Sixty locomotives were delivered between 1997 and 2002; numbered BB36001 to BB36060. BB36001 to BB36030 received a red livery, and were primarily used for trains to Belgium. The remainder received a green freight livery, and were mainly used for trains to Italy. [2] [15] At the same time the closely similar SNCB Class 13 and CFL Class 3000 for Belgium and Luxembourg were manufactured. [15]
The class were designed as mixed-use locomotive, and were to be used Nightstar cross-channel passenger sleeper services (cancelled 1997/9). [16]
In July 2010 the locomotives numbered 36001 to 36030 were transferred to SNCF's rolling stock leasing subsidiary Akiem. [16]
From 2003 locomotives were modified for work into Italy; two subclasses were created BB36200 and BB36300. 12 units of the BB36200 class were created, modified to allow multiple unit operation, and with fire extinguishers fitted. 8 units of the BB36300 subclass were created with the same modifications as the BB36200 plus the addition of the SAFI (Signal d'Alarme à Freinage Inhibable) safety system. Later, all BB36200s were converted to BB36300s, along with remaining units 36051 to 36060. [15] [16]
Since 2003, rolling road trains (operated by Trenitalia / SNCF Geodis subsidiary AFA Autostrada Ferroviaria Alpina ) have been hauled by Astride units between Aiton, Savoie, France and Orbassano, Italy using Modalohr wagons. [17] The class had reliability problems, with an availability of 80%, and an incident rate of 23 per million km in 2005. [18] As part of the joint venture Trenitalia acquired numbers 36339 and 36348 for AFA. [16]
Locomotives operating in Italy for SNCF Fret's Italian subsidiary 'Monferail' were given the Italian numbering E 436. [16] [19] [20]
The Bombardier–Alstom HHP-8 is a twin-cab electric locomotive built for Amtrak and MARC by a consortium of Bombardier and Alstom. Its electrical system was based on Alstom's BB 36000 locomotive.
The SNCF BB 26000 locomotives are a class of dual voltage, four axle B'B' electric locomotives capable of a top speed of 200 km/h built by GEC Alsthom between 1988 and 1998 for SNCF. The locomotives are also commonly known as the Sybics.
The SNCF BB 20011 and SNCF BB 20012 were electric locomotives used for testing, built by Alsthom between 1985 and 1986. The two locomotives were the synchronous dual-voltage prototypes for Class BB 26000.
Alstom Traxx is a modular product platform of mainline diesel-electric and electric locomotives. It was produced originally by Bombardier Transportation and later Alstom, and was built in both freight and passenger variants. The first version was a dual-voltage AC locomotive built for German railways from the year 2000. Later types included DC versions, as well as quadruple-voltage machines, able to operate on all four electrification schemes commonly used in Europe. The family was expanded in 2006 to include diesel-powered versions. Elements common to all variants include steel bodyshells, two bogies with two powered axles each, three-phase asynchronous induction motors, cooling exhausts on the roof edges, and wheel disc brakes.
The E.464 is a class of Italian railways electric locomotives. They were introduced in the course of the 1990s for hauling light trains, especially for commuter service. They were acquired by FS Trenitalia to replace the old E.424 and E.646, dating from the 1940s and 1950s. The class was originally designed by ABB Trazione, later ADTranz, and produced in the Italian plant of Vado Ligure.
The SNCF Class BB 60000 are a class of 4 axle heavy shunting and light freight diesel–electric locomotives built at the Vossloh España works in Valencia. Since the class is primarily used as a freight locomotive the class is commonly referred to as SNCF BB 460000.
The Class 13 are a type of mixed use 200 km/h (124 mph) multivoltage electric locomotive of type Traxis designed by Alstom in the late 1990s for the Belgian and Luxembourgish railways.
E.402A/B is a class of electric locomotives mainly used on medium speed passenger trains by the Italian railway company FS Trenitalia.
The SNCF BB 75000 are 4 axle, Bo′Bo′, diesel electric locomotives ordered in 2000 by SNCF for freight operations to renew its aging fleet.
The locomotive SNCF BB 10003 was an experimental prototype locomotive converted from a SNCF BB 15000 electric locomotive and used to develop the use of asynchronous induction traction motors.
The SNCF BB 1280 class were a class of 600 V DC 4 axle Bo′Bo′ electric locomotives, formerly Compagnie du chemin de fer de Paris à Orléans machines, initially built for an underground section of line connecting the Gare d'Austerlitz to the Quai d'Orsay in inner Paris. The locomotives were converted for 1500 V DC use in the 1930s, and renumbered PO E.281 to E.293. They were absorbed by the SNCF, and operated as shunters until the late 1960s.
A monomotor bogie is a form of traction bogie used for an electric locomotive or diesel-electric locomotive. It is distinguished by having a single traction motor on each bogie.
The SNCF CC 40100 was a French class of quad-voltage 4,340 kW (5,820 hp) electric locomotives. They were intended for high-performance passenger services on the Trans Europ Express (TEE) routes of the 1960s and 1970s. This non-stop international working required them to support the electrical standards of several networks. They are significant for combining three innovations in locomotive design: quad-voltage working, three-axle monomotor bogies and the new 'Nez Cassé' body style of French locomotives.
The BB 13000 class were electric locomotives operated by SNCF in France. They were one of four classes, together with the BB 12000, CC 14000 and CC 14100 classes, that formed an experimental group for studying the practicality of the new French 25 kV 50 Hz AC electrification.
The 2D2 5500 were electric locomotives operated by the Compagnie du chemin de fer de Paris à Orléans, then SNCF in France, in operation from 1933 to 1980.
The BB 25150 is a class of electric locomotives in service with the French railways SNCF, built by Materiel de Traction Electrique (MTE) between 1967 and 1976. They are dual voltage locomotives working off both 1500 V DC and 25 kV 50 Hz AC. Designed by André Jacquemin, the class is a development of the earlier BB 25100.
The BB 25100 is a class of electric locomotives in service with the French railways SNCF, built by Materiel de Traction Electrique (MTE) in 1967. They are dual voltage locomotives working off both 1500 V DC and 25 kV 50 Hz AC with a top speed of 130 km/h (81 mph). The class was designed by André Jacquemin.
The BB 25200 is a class of electric locomotives in service with the French railways SNCF, built by Materiel de Traction Electrique (MTE) between 1967 and 1976. They are dual voltage locomotives working off both 1500 V DC and 25 kV 50 Hz AC. Designed by André Jacquemin, the class is a development of the earlier BB 25100 and BB 25150 locomotives with a higher top speed, being capable of 160 km/h (99 mph). It is the dual voltage equivalent of the BB 9200 and BB 16000 classes.
BB 1500 were a series of forty electric locomotives from the Chemins de fer du Midi, operating under direct current at a voltage of 1.5 kV.
The BB 1600 were a series of fifty electric locomotives from the Chemins de fer du Midi, operating under direct current at a voltage of 1.5 kV.
This section presents you all the electric locomotives, based on the PRIMA product platform, built by Alstom Transportation in Belfort since 1999
{{cite book}}
: |journal=
ignored (help)